Intensity of an oxygen saturation image improved using scanning NIR-LED light irradiation

A near-infrared (940 nm) image of skin tissue can be substantially enhanced using optical scanning technology (OST) that can reduce the scattering effect and remove the wrinkles or fine hair in the image. Using OST to create the skin tissue image ensured that the contour of blood vessels became more clear than that obtained from the divergent light source. In addition, the oxygen saturation of the blood vessels and tissues obtained using OST were approximately 98.65 and 93.17%, respectively, exhibiting an increase of more than 20% compared with that obtained using divergent light, and approached the value when measured using commercial pulse oximetry. Because the proposed method has a deep light penetration depth and high image intensity and resolution for oxygen saturation analysis, it is highly appropriate to be applied to future studies on diabetes and cardiovascular diseases.     

Estimation of HIFU induced lesions in vitro: numerical simulation and experiment

The heated necrotic element created by a single high intensity focused ultrasound exposure can be considered as the foundation of high intensity focused ultrasound ablation of tumour lesions. In this paper, we studied the effects of exposure dose and focal depth in tissue on heated necrotic elements, using numerical simulation and experiment. The acoustic field of one of the transducers for the Model-JC HAIFU focused ultrasound tumour therapeutic system was modeled using O Neill's equation, and then using this information together with Pennes' bio-heat-transfer-equation and finite difference techniques, the heated necrotic element was simulated numerically. The results showed that the theoretical predictions were basically in agreement with the experimental data for low exposures, but that the experimental values suddenly increased with the increasing exposure and exceeded the theoretical predictions. The element volume from the theoretical prediction and experiment for the heated necrotic element decreased with increasing focal depth in tissue for a given exposure, and the theoretical predictions were a little lower than the experimental ones. Therefore, heated necrotic elements created by high intensity focused ultrasound can be well predicted from a knowledge of ultrasonic biophysics theories.     

Intensified and controllable vaporization of phase-changeable nanodroplets induced by simultaneous exposure of laser and ultrasound

Phase-changeable contrast agents have been proposed as a next-generation ultrasound contrast agent over conventional microbubbles given its stability, longer circulation time and ability to extravasate. Safe vaporization of nanodroplets (NDs) plays an essential role in the practical translation of ND applications in industry and medical therapy. In particular, the exposure parameters for initializing phase change as well as the site of phase change are concerned to be controlled. Compared to the traditional optical vaporization or acoustic droplet vaporization, this study exhibited the potential of using simultaneous, single burst laser and ultrasound incidence as a means of activating phase change of NDs to generate cavitation nuclei with reduced fluence and sound pressure. A theoretical model considering the laser heating, vapor cavity nucleation and growth was established, where qualitative agreement with experiment findings were found in terms of the trend of combined exposure parameters in order to achieve the same level of vaporization outcome. The results indicate that using single burst laser pulse and 10-cycle ultrasound might be sufficient to lower the exposure levels under FDA limit for laser skin exposure and ultrasound imaging. The combination of laser and ultrasound also provides temporal and spatial control of ND vaporization and cavitation nucleation without altering the sound field, which is beneficial for further safe and effective applications of phase-changeable NDs in medical, environmental, food processing and other industrial areas.     

Vibro-acoustography and multifrequency image compounding

Vibro-acoustography is an ultrasound based imaging modality that can visualize normal and abnormal soft tissue through mapping the acoustic response of the object to a harmonic radiation force at frequency Δf induced by focused ultrasound. In this method, the ultrasound energy is converted from high ultrasound frequencies to a low acoustic frequency (acoustic emission) that is often two orders of magnitude smaller than the ultrasound frequency. The acoustic emission is normally detected by a hydrophone. Depending on the setup, this low frequency sound may reverberate by object boundaries or other structures present in the acoustic paths before it reaches the hydrophone. This effect produces an artifact in the image in the form of gradual variations in image intensity that may compromise image quality. The use of tonebursts with finite length yields acoustic emission at Δf and at sidebands centered about Δf. Multiple images are formed by selectively applying bandpass filters on the acoustic emission at Δf and the associated sidebands. The data at these multiple frequencies are compounded through both coherent and incoherent processes to reduce the acoustic emission reverberation artifacts. Experimental results from a urethane breast phantom are described. The coherent and incoherent compounding of multifrequency data show, both qualitatively and quantitatively, the efficacy of this reverberation reduction method. This paper presents theory describing the physical origin of this artifact and use of image data created using multifrequency vibro-acoustography for reducing reverberation artifacts.     

Investigation of linear and nonlinear frequency modulated excitation effects on tissue harmonic imaging

The generation of tissue harmonics is due to nonlinear nature of ultrasound wave propagation in biological tissues.The tissue harmonics for imaging i.e.tissue harmonic imaging (THI)uses higher frequency components for imaging in which the resolution improves significantly but signal-to-noise ratio(SNR)and penetration depth remains low as compared to both fundamental and second harmonic imaging.The coded excitations have potential to improve the SNR which ultimately leads to improved penetration depth.In the present work,the linear frequency modulated(chirp/LFM)and nonlinear frequency modulated(NLFM)signals have been used to investigate the nonlinear ultrasound wave propagation and harmonic generation in biological tissues.The SNR has been found to be substantially improved for coded tissue harmonic imaging(CTHI)as well as for coded superharmonic imaging(CSHI).     

Simulation of diagnostic ultrasound image pulse sequences in cavitation bioeffects research

Research on cavitational bioeffects of diagnostic ultrasound (DUS) typically involves a diagnostic scanner as the exposure source. However, this can limit the ranges of exposure parameters for experimentation. Anesthetized hairless rats were mounted in a water bath and their right kidneys were exposed to ultrasound. Amplitude modulation with Gaussian envelopes simulated the image pulse sequences (IPSs) produced by diagnostic scanning. A 10 mulkgmin IV dose of Definity((R)) contrast agent was given during 1-5 min exposures. Glomerular capillary hemorrhage was assessed by histology. A stationary exposure approximated the bioeffects induced by DUS within the beam area. However, the use of five closely spaced exposures more faithfully reproduced the total effect produced within a DUS scan plane. Single pulses delivered at 1 s intervals induced the same effect as the simulated DUS. Use of 100 ms triangle-wave modulations for ramp-up or ramp-down of the IPS gave no effect or a large effect, respectively. Finally, an air-backed transducer simulating DUS without contrast agent showed a zero effect even operating at twice the present DUS guideline upper limit. Relatively simple single-element laboratory exposure systems can simulate diagnostic ultrasound exposure and allow exploration of parameter ranges beyond those available on present clinical systems.     

高强度聚焦超声治疗子宫肌瘤中水囊耦合的影响评估*

水囊作为一种特殊的辅助器件在高强度聚焦超声治疗子宫肌瘤的过程中发挥着重要作用,但它同时也会让声通道变得更加复杂,对超声治疗效率和超声引导影像均造成负面影响。基于实际临床场景,利用k-Wave声学仿真软件建立高强度聚焦超声辐照靶组织及其超声引导过程的仿真模型,在有无水囊两个场景下,对治疗效率和监控影像质量进行定量评估。结果表明,加入水囊后,声波的聚焦性变差,焦域处的最高温度降低;通过分析超声图像的分辨率、对比度、对比噪声以及背景信噪比,发现加入水囊后超声图像的质量降低。建立的数值仿真模型能够初步评估水囊对治疗效率和监控影像质量的影响,可作为一种评估体系用于优化水囊参数,如水囊材料、厚度、形状、内部溶液成分等,为下一步实验探索对治疗效率和影像质量影响最小的水囊耦合方式提供评估手段。     

Analytical and numerical calculations of optimum design frequency for focused ultrasound therapy and acoustic radiation force

Focused ultrasound therapy relies on acoustic power absorption by tissue. The stronger the absorption the higher the temperature increase is. However, strong acoustic absorption also means faster attenuation and limited penetration depth. Hence, there is a trade-off between heat generation efficacy and penetration depth. In this paper, we formulated the acoustic power absorption as a function of frequency and attenuation coefficient, and defined two figures of merit to measure the power absorption: spatial peak of the acoustic power absorption density, and the acoustic power absorbed within the focal area. Then, we derived “rule of thumb” expressions for the optimum frequencies that maximized these figures of merit given the target depth and homogeneous tissue type. We also formulated a method to calculate the optimum frequency for inhomogeneous tissue given the tissue composition for situations where the tissue structure can be assumed to be made of parallel layers of homogeneous tissue. We checked the validity of the rules using linear acoustic field simulations. For a one-dimensional array of 4 cm acoustic aperture, and for a two-dimensional array of 4 × 4 cm² acoustic aperture, we found that the power absorbed within the focal area is maximized at 0.86 MHz, and 0.79 MHz, respectively, when the target depth is 4 cm in muscle tissue. The rules on the other hand predicted the optimum frequencies for acoustic power absorption as 0.9 MHz and 0.86 MHz, respectively for the 1D and 2D array case, which are within 6% and 9% of the field simulation results. Because radiation force generated by an acoustic wave in a lossy propagation medium is approximately proportional to the acoustic power absorption, these rules can be used to maximize acoustic radiation force generated in tissue as well.     

Performance testing of medical ultrasound equipment: fundamental vs. harmonic mode

Assessment of the performance of medical ultrasound equipment is generally based on the image quality in fundamental mode. Recent development of the so-called tissue harmonic imaging (THI) mode induces the need for assessment of differences in the quality of imaging in THI vs. fundamental imaging mode. Quality features to be tested are sensitivity (penetration depth), spatial resolution, contrast resolution, lesion signal-to-noise ratio, and tissue-to-clutter ratio (TCR). These features are explained and examples are shown. The main conclusion from a comparison of the results for the two imaging modes might be that when using THI improvement of TCR, in particular in the near field, is obtained at the expense of a loss in axial resolution. Furthermore, lesion detection is not significantly improved.     

超声激发声信号幅值实时监测HIFU焦域组织损伤*

聚焦超声消融肿瘤过程中的损伤实时监测是临床治疗面临的一个关键难题,双频聚焦超声不仅能提高治疗效率,且能在共焦区域激发出声信号,该声信号的幅值、频率等信息与焦域组织的机械和声学特性紧密相关。本文构建了一种双频聚焦超声治疗及组织损伤实时监测系统。该系统在聚焦超声辐照离体组织过程中,通过外部水听器接收双频激发的组织声发射信号,并通过上位机进行高速数据采集、数字滤波、时频处理等,分析声发射信号幅值与离体组织损伤之间的变化规律。实验研究结果表明：随着焦域组织损伤的形成,其弹性等声学特征发生改变,导致声发射信号幅值逐渐降低,表明声发射信号幅值的变化可较好地反映靶组织声学特征和结构的变化,从而实现聚焦超声治疗中靶组织损伤的实时监测。本文提出的监测方案相比传统超声影像监控更灵敏,有望为聚焦超声临床治疗中的组织损伤监控提供一种新的实时监测方案和手段。     

Ultrasound-mediated transdermal drug delivery of fluorescent nanoparticles and hyaluronic acid into porcine skin in vitro

Transdermal drug delivery(TDD) can effectively bypass the first-pass effect. In this paper, ultrasound-facilitated TDD on fresh porcine skin was studied under various acoustic parameters, including frequency, amplitude, and exposure time. The delivery of yellow–green fluorescent nanoparticles and high molecular weight hyaluronic acid(HA) in the skin samples was observed by laser confocal microscopy and ultraviolet spectrometry, respectively. The results showed that,with the application of ultrasound exposures, the permeability of the skin to these markers(e.g., their penetration depth and concentration) could be raised above its passive diffusion permeability. Moreover, ultrasound-facilitated TDD was also tested with/without the presence of ultrasound contrast agents(UCAs). When the ultrasound was applied without UCAs,low ultrasound frequency will give a better drug delivery effect than high frequency, but the penetration depth was less likely to exceed 200 μm. However, with the help of the ultrasound-induced microbubble cavitation effect, both the penetration depth and concentration in the skin were significantly enhanced even more. The best ultrasound-facilitated TDD could be achieved with a drug penetration depth of over 600 μm, and the penetration concentrations of fluorescent nanoparticles and HA increased up to about 4–5 folds. In order to get better understanding of ultrasound-facilitated TDD, scanning electron microscopy was used to examine the surface morphology of skin samples, which showed that the skin structure changed greatly under the treatment of ultrasound and UCA. The present work suggests that, for TDD applications(e.g., nanoparticle drug carriers, transdermal patches and cosmetics), protocols and methods presented in this paper are potentially useful.     

Synthetic aperture ultrasound imaging

The paper describes the use of synthetic aperture (SA) imaging in medical ultrasound. SA imaging is a radical break with today's commercial systems, where the image is acquired sequentially one image line at a time. This puts a strict limit on the frame rate and the possibility of acquiring a sufficient amount of data for high precision flow estimation. These constrictions can be lifted by employing SA imaging. Here data is acquired simultaneously from all directions over a number of emissions, and the full image can be reconstructed from this data. The paper demonstrates the many benefits of SA imaging. Due to the complete data set, it is possible to have both dynamic transmit and receive focusing to improve contrast and resolution. It is also possible to improve penetration depth by employing codes during ultrasound transmission. Data sets for vector flow imaging can be acquired using short imaging sequences, whereby both the correct velocity magnitude and angle can be estimated. A number of examples of both phantom and in vivo SA images will be presented measured by the experimental ultrasound scanner RASMUS to demonstrate the many benefits of SA imaging.     

Quantitative ultrasound brain imaging with multiscale deconvolutional waveform inversion

High-resolution images of human brain are critical for monitoring the neurological conditions in a portable and safe manner. Sound speed mapping of brain tissues provides unique information for such a purpose. In addition, it is particularly important for building digital human acoustic models, which form a reference for future ultrasound research. Conventional ultrasound modalities can hardly image the human brain at high spatial resolution inside the skull due to the strong impedance contrast between hard tissue and soft tissue. We carry out numerical experiments to demonstrate that the time-domain waveform inversion technique, originating from the geophysics community, is promising to deliver quantitative images of human brains within the skull at a sub-millimeter level by using ultra-sound signals. The successful implementation of such an approach to brain imaging requires the following items: signals of sub-megahertz frequencies transmitting across the inside of skull, an accurate numerical wave equation solver simulating the wave propagation, and well-designed inversion schemes to reconstruct the physical parameters of targeted model based on the optimization theory. Here we propose an innovative modality of multiscale deconvolutional waveform inversion that improves ultrasound imaging resolution, by evaluating the similarity between synthetic data and observed data through using limited length Wiener filter. We implement the proposed approach to iteratively update the parametric models of the human brain. The quantitative imaging method paves the way for building the accurate acoustic brain model to diagnose associated diseases, in a potentially more portable, more dynamic and safer way than magnetic resonance imaging and x-ray computed tomography.     

A new brain stimulation method: Noninvasive transcranial magneto–acoustical stimulation

We investigate transcranial magneto–acoustical stimulation(TMAS) for noninvasive brain neuromodulation in vivo.TMAS as a novel technique uses an ultrasound wave to induce an electric current in the brain tissue in the static magnetic field. It has the advantage of high spatial resolution and penetration depth. The mechanism of TMAS onto a neuron is analyzed by combining the TMAS principle and Hodgkin–Huxley neuron model. The anesthetized rats are stimulated by TMAS, resulting in the local field potentials which are recorded and analyzed. The simulation results show that TMAS can induce neuronal action potential. The experimental results indicate that TMAS can not only increase the amplitude of local field potentials but also enhance the effect of focused ultrasound stimulation on the neuromodulation. In summary, TMAS can accomplish brain neuromodulation, suggesting a potentially powerful noninvasive stimulation method to interfere with brain rhythms for diagnostic and therapeutic purposes.     

A feasibility study of temperature rise measurement in a tissue phantom as an alternative way for characterization of the therapeutic high intensity focused ultrasonic field

The feasibility that temperature field measurements in vitro as an alternative way to characterize the high intensity focused ultrasound (HIFU) field used in therapeutic applications has been explored in a phantom study. Thermocouples (copper-constantan, diameter 0.125 mm) are embedded in a phantom filled with tissue mimicking material that simulates the thermal and acoustic properties of soft-tissue. The temperature rises as a function of ultrasound exposure time near the focus of a HIFU transducer (1.1 MHz, active radius a = 32 mm, geometric focal length = 62 mm) of various acoustic powers up to 30 W are measured and compared with predicted values using a simple nonlinear Gaussian model. The experimental results can be explained well by the model if no acoustic cavitation takes place. When the acoustic power become higher (>5 W) and the local temperature elevation >15 °C and the local temperature is >40 °C at the focal point, cavitation vapor bubbles appear. The presence of the cavitation bubbles may increase the temperature rise rate initially. The bubble aggregates may form along the beam axis under sonication and then eventually makes the temperature elevation reach a saturated value. When acoustic cavitation occurs, the bubble-assisted enhancement of the initial temperature rise (exposure time t < 2 s) can still be predicted by the theory.     

Cavitation-enhanced delivery of macromolecules into an obstructed vessel

Poor drug penetration through tumor tissue has emerged as a fundamental obstacle to cancer therapy. The aim of this study was to examine the ability of cavitation instigated by high-intensity focused ultrasound (HIFU) to increase convective transport of a model therapeutic in an in vitro tumor model. Cavitation activity was quantified by analyzing passively recorded acoustic emissions, and mass transfer was quantified using post-treatment image analysis of the distribution of a dye-labeled macromolecule. The strong correlation between cavitation activity and drug delivery suggests the potential for non-invasive treatment and monitoring.     

Comparison of fundamental, second harmonic, and superharmonic imaging: a simulation study

In medical ultrasound, fundamental imaging (FI) uses the reflected echoes from the same spectral band as that of the emitted pulse. The transmission frequency determines the trade-off between penetration depth and spatial resolution. Tissue harmonic imaging (THI) employs the second harmonic of the emitted frequency band to construct images. Recently, superharmonic imaging (SHI) has been introduced, which uses the third to the fifth (super) harmonics. The harmonic level is determined by two competing phenomena: nonlinear propagation and frequency dependent attenuation. Thus, the transmission frequency yielding the optimal trade-off between the spatial resolution and the penetration depth differs for THI and SHI. This paper quantitatively compares the concepts of fundamental, second harmonic, and superharmonic echocardiography at their optimal transmission frequencies. Forward propagation is modeled using a 3D-KZK implementation and the iterative nonlinear contrast source (INCS) method. Backpropagation is assumed to be linear. Results show that the fundamental lateral beamwidth is the narrowest at focus, while the superharmonic one is narrower outside the focus. The lateral superharmonic roll-off exceeds the fundamental and second harmonic roll-off. Also, the axial resolution of SHI exceeds that of FI and THI. The far-field pulse-echo superharmonic pressure is lower than that of the fundamental and second harmonic. SHI appears suited for echocardiography and is expected to improve its image quality at the cost of a slight reduction in depth-of-field.     

Research on the influence and correction method of depth scanning error to the underwater acoustic image measurement

The technology of underwater acoustic image measurement was a passive locating method with high precision in near field.To improve the precision of underwater acoustic image measurement,the influence of the depth scan error was analyzed and the correction method was presented.For a pass array navigation process,when the scan depth was deeper than the real depth of target,the measurement errors could be corrected,and the real depth could be calculated.Otherwise the depth error couldn’t be corrected.The simulations and the experiments were done.The results were satisfying and consistent with the theoretical conclusions.     

基于图像内容视觉感知的图像质量客观评价方法

图像质量客观评价在图像和视频传输、编解码以及服务质量中起着非常重要的作用.然而现有的方法往往没有考虑图像内容特征及其视觉感知,使得其质量客观评价与主观感知结果存在一定的差距.基于此,本文结合图像内容的复杂性特征和人眼的掩蔽特性、对比敏感度特性以及亮度感知的非线性特性,提出了一种基于人眼对图像内容感知的图像质量客观评价方法.该方法首先结合亮度感知的非线性模型将图像进行转换,得到人眼感知强度图;再分别以人眼对比敏感度值和图像局部平均对比度值作为权重因子对强度求和,以求和的数据信息作为人眼感知图像的内容,并构建图像感知模型;最后以此模型分别模拟人眼感知参考图像和失真图像,并计算二者的强度差,以强度差为评价分数的基础构建图像质量客观评价模型.采用LIVE,TID2008和CSIQ三个数据库中的共47幅参考图像和1549幅测试图像进行仿真实验,且与SSIM,VSNR,FSIM和PSNRHVS等典型的图像质量客观评价模型进行对比分析,同时探讨影响图像质量评价的因素.结果表明:所提方法的评价分数与主观评价分数的Pearson线性相关性系数和Spearman秩相关系数值比SSIM的评价结果均有一定程度的提高,提高幅度分别平均为9.5402%和3.2852%,比PSNRHVS和VSNR提高幅度更大.综合以上表明:所提方法是一种有效可行的图像质量客观评价方法;同时,在图像质量客观评价中,考虑人眼对图像内容的感知和复杂度的分析有助于提高图像质量主客观评价的一致性,评价精度可得到进一步的提高.     

Numerical simulation of laser-generated ultrasound in non-metallic material by the finite element method

The use of a pulsed laser for the generation of the elastic waves in non-metallic materials in the thermoelastic regime is investigated by using finite element method (FEM), taking into account not only thermal diffusion and the finite spatial and temporal shape of the laser pulse, but also optical penetration and the temperature dependence of material properties. The optimum finite element model is established based on analysis of two important parameters, meshing size and time step, and the stability of solution. Temperature distributions and temperature gradient fields in non-metallic material for different time steps are obtained, this temperature field is equivalent to a bulk force source to generate ultrasonic wave. The laser-generated ultrasound waveforms at the epicenter and surface acoustic waveforms (SAWs) are obtained and the influence of optical penetration into the material on the temperature field and the ultrasound waveforms are analyzed. The numerical results indicate that the heat penetration into non-metallic material is caused mainly by the optical penetration, and the ultrasound waveforms, especially the shape of the precursor, are strongly dependent on the optical penetration depth into non-metallic material.