MFI沸石纳米片及b轴取向MFI沸石薄膜的制备

我们通过自下而上（bottom-up）的方法制备了高宽深比、高结晶度的b轴方向上超薄的MFI沸石纳米片,为制备b轴取向MFI沸石薄膜提供了基础。采用滑动涂覆法（slip coating method）在玻璃片载体上制备了厚度约为100 nm的b轴取向MFI纳米片晶种层。采用无模板剂二次生长法,抑制晶种层面外孪晶生长,实现了晶种层的面内外延生长。在合成体系的n_SiO2：n_Na2O：n_{C2 H5 OH}：n_{H2 O}=1：0.03：1.3：0.89、晶化时间48 h、晶化温度180℃时,制备了厚度约为200 nm的连续致密的b轴取向MFI沸石膜,与基于四丙基氢氧化铵（TPAOH）的常规合成溶液水热二次生长制备的MFI沸石膜相比,厚度降低了90%,并且保持了晶种层的b轴取向性。     

溶剂热法制备BiFeO3基纳米颗粒光催化剂及其性能

以聚酰胺-胺（PAMAM）树形分子为稳定剂,采用溶剂热法制得了纯相BiFeO₃纳米颗粒（A）和BiFeO₃/Bi₂₅FeO40/Fe₂O₃复合纳米颗粒（B）,并采用HRTEM、XRD、UV-Vis、SQUID对其结构和性能进行了表征。2种颗粒结晶良好,粒径小于10 nm,能有效光催化降解亚甲基蓝,磁性回收率分别为74.6%（A）和90.2%（B）。BiFeO₃/Bi₂₅FeO40/Fe₂O₃复合纳米颗粒的光催化与磁性能均优于纯相BiFeO₃纳米颗粒,是因为复合纳米颗粒含有多种相,相界面存在异质结构有利于光生载流子的分离和迁移,并且对可见光的吸收能力更强。     

纳米陶瓷颗粒的电催化效应及其在复合刷镀层中的化学状态

采用循环伏安法和电位阶跃法研究了nano-Al₂O₃ / Ni复合电刷镀体系的电化学响应，探讨了纳米颗粒对复合电沉积的影响；用X射线光电子谱研究了复合镀层中nano-Al₂O₃颗粒与基质金属之间的相互作用。结果表明纳米颗粒能使金属沉积过电位显著降低，电流效率、金属成核率及晶体生长速度增加，从而对金属镍的电结晶表现出明显的催化效应；在金属镍电结晶过程中，部分到达阴极附近的nano-Al₂O₃颗粒被电极表面捕获。金属生长面上的吸附态镍原子到达纳米颗粒与电极表面接触处，与该处纳米颗粒表面的不饱和氧原子形成Ni-O化学键，纳米颗粒与基质镍以化学键形式结合。纳米颗粒与电极表面的结合区域成为新的成核或生长中心，在随后的刷镀过程中纳米颗粒逐渐被电沉积的金属镍包埋，从而形成复合镀层。     

等离子体修饰磁载TiO2光催化剂性能研究

以化学共沉法制备的CoFe₂O₄纳米粒子为磁核,采用TiCl₄水解包覆技术制备磁载二氧化钛纳米复合粒子CoFe₂O₄ /TiO_x(TCF),利用低温等离子体技术修饰TCF制备了CoFe₂O₄/TiO₂(PTCF)纳米复合光催化剂。运用VSM(振动样品磁强计)技术对样品磁性能进行研究,结果表明：等离子体修饰后的复合材料仍具有较高的饱和磁化强度,可在外加磁场作用下实现催化剂在水中的分离与回收;样品的XRD、TEM和UV-Vis分析测试结果表明：等离子体修饰后的复合材料有锐钛矿型TiO₂存在;TEM谱图显示磁核CoFe₂O₄的平均粒径约为20 nm,TCF复合粒子的粒径约为30~40 nm,TiO₂包覆层的厚度为10~20 nm。与纯TiO₂相比PTCF样品对光的吸收拓展到整个紫外-可见区,扩大了光谱响应范围;对甲基橙溶液降解的光催化活性评价研究表明：TCF复合粒子等离子体修饰后的PTCF纳米复合光催剂的光催化活性明显提高。     

功能化ZnxCd1-xS纳米晶的制备及其光学性能的研究

以氯化锌、氯化镉和硫化钠为原料，采用巯基乙醇为表面修饰剂，H₂O/DMF为溶剂，制得未团聚且分散均匀的纳米晶溶液，同时得到表面富含羟基基团不同锌镉组成的复合Zn_xCd_1-xS纳米晶。利用FTIR、EDS、UV-Vis、XRD、荧光光谱(PL)考察了复合纳米晶结构和光学性能的关系，并利用紫外灯摄像技术对Zn_xCd_1-xS纳米晶的光致发光性能进行     

基于电纺丝法的In2O3/CdO复合材料的制备及甲醛气敏特性

用静电纺丝法制备了In(NO₃)₃/聚乙烯吡咯烷酮(PVP)纺丝前驱物, 然后分别在500、600、700℃时烧结得到三种In₂O₃ 纳米纤维. 通过X 射线衍射(XRD)仪、热重差热分析(TG/DTA)、场发射扫描式电子显微镜(FE-SEM)表征结果得知, 500℃时In₂O₃的晶相已经形成, 且粒径为最小, 约为24 nm, 纳米纤维呈介孔结构.将三种烧结温度的In₂O₃纤维制作成气敏元件, 测试对比了三种元件对甲醛气体的敏感特性, 结果表明, 500℃烧结得到的In₂O₃纳米纤维在工作温度为240℃时响应最好, 对浓度为10×10^-6 (体积分数, φ)甲醛的响应为7.用静电纺丝法合成了CdO 纳米颗粒, 通过XRD、SEM 表征得知CdO 呈粒径约为68 nm 的颗粒. 将In₂O₃和CdO以不同摩尔比(1:1, 10:1, 20:1)复合, 对比测试了纯In₂O₃及三种In₂O₃/CdO复合材料对应的气敏元件对甲醛的气敏特性, 测试结果表明当In₂O₃纳米纤维与CdO纳米颗粒以摩尔比10:1 复合时, 元件的工作温度较低(200℃), 且对甲醛表现出最佳的气敏特性, 对浓度为10×10^-6甲醛的响应为13.6, 响应/恢复时间为140 s/32s. 最后对不同摩尔比复合的In₂O₃/CdO对甲醛的气敏机理进行了初步分析.     

反相微乳液法制备纳米Al2O3颗粒及其形成反应机理的研究

通过聚乙二醇辛基苯基醚(曲拉通X-100)/正丁醇/环己烷/水溶液形成的体系, 采用反相微乳液法合成了Al₂O₃纳米粒子. 对前驱体进行热分析(TG-DTG-DTA), 确定了合适的煅烧温度为1150 ℃. 采用X射线衍射(XRD)、透射电镜(TEM)、紫外可见分光光度法(UV-vis)分别对产物的结构、粒度和形貌进行了表征, 考察了微乳液中水与表面活性剂的物质的量之比(ω_o)、煅烧温度和煅烧时升温速率等关键因素对产物形貌和晶相的影响, 并通过分析进一步揭示了Al₂O₃纳米粒子的形成机理. 结果表明, 控制ω_o为10、煅烧温度为1150 ℃可得到分散性好、粒径分布均匀的Al₂O₃纳米粒子, 且2 ℃/min的升温速率更有利于产物向稳定的α晶相转变.     

开放骨架磷酸铝AlPO4-12的晶化过程

以乙二胺为结构导向剂,在200℃加热物质的量组成为n_Al2O3:n_P2O5:n_en:n_H2O=1:1:2:226的初始混合物(en=乙二胺),合成了三维开放骨架磷酸铝化合物AlPO₄-12。用X-射线衍射、元素分析、pH测量、液体核磁共振以及电喷雾质谱研究了其晶化过程。依据质谱数据,开发了一个系统枚举在晶化过程中可能生成的小结构单元分子式的方法。研究发现在AlPO₄-12的晶化过程中经历了层状磷酸铝UiO-15和UiO-13中间相,液相中Al物种的浓度极低,在晶化过程中生成的小结构单元中P-OH逐渐增多,乙二胺分子逐渐质子化,在晶化过程中生成了磷酸铝的4元环和6元环。用电喷雾质谱研究晶化过程中的液相可以获得小结构单元的结构和组成信息。     

Al2O3催化剂结构对催化臭氧化活性的影响

以Al₂O₃为催化剂催化臭氧化处理邻苯二甲酸二甲酯. 通过XRD、比表面积、孔结构、FTIR和活性评价等方法对催化剂的物化性质及催化活性进行了研究, 考察了焙烧温度、成型粒径对催化剂活性的影响. 结果表明, Al₂O₃催化剂对臭氧化降解邻苯二甲酸二甲酯具有很高的催化活性, 反应120 min后, 总有机碳(TOC)的去除率从单独臭氧氧化的23.9%提高到55.1%; 焙烧温度对催化剂的活性具有很大的影响, 600 ℃催化剂催化活性最高; 随着焙烧温度的升高, Al₂O₃晶型经历了从γ-Al₂O₃到θ-Al₂O₃到α-Al₂O₃的转变, 催化剂的比表面积、焙烧得到的孔容逐渐变小, 晶体粒径变大, 表面•OH数量减少, 催化活性下降. Al₂O₃成型粒径的减小, 提高了催化剂的外比表面积, 减小了内部传质扩散的影响, 从而提高了催化活性.     

静电纺丝法制备纳米氧化铟锡及其导电性能

采用静电纺丝-溶胶凝胶法,以SnCl₂、InCl₃、聚乙烯吡咯烷酮（PVP）等为原料,乙醇胺为水解控制剂,合成了超细氧化铟锡（ITO）纳米纤维及富氧缺陷的ITO纳米颗粒。采用透射电子显微镜（TEM）、选区电子衍射（SAED）、扫描电子显微镜（SEM）、热重分析（TGA）、X射线衍射（XRD）、X射线电子能谱（XPS）、四探针电阻仪,系统研究了超细ITO纤维及颗粒的形貌、晶型、氧缺陷及导电性能。在400℃空气煅烧后,纤维中的PVP高分子骨架发生热分解,获得超细、多孔ITO纳米纤维,晶型为立方相。进一步升高煅烧温度至800℃,ITO纳米纤维转变为富氧缺陷的纳米颗粒,晶格氧空位含量高达38.9%。随着煅烧温度升高,Sn⁴⁺掺入到In₂O₃晶格中,发生晶格膨胀,晶面间距增大。煅烧温度由400℃升高至800℃,未发生立方相向六方相的转变,晶型稳定,晶粒尺寸从32 nm生长到44 nm,晶格应变（ε₀）从1.42×10^-2减小至1.04×10^-2,应变诱导的晶格弛豫逐渐减小。此外,高温煅烧可抑制In₂O₃晶粒（111）晶面的增长,随着In₂O₃的（400）与（222）晶面比值（I_（400）/I_（222））的增加,ITO电导率逐渐升高。在800℃获得的ITO纳米晶粒导电率最高。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.