CO2 Reforming of CH4 over Ni／CeO2-ZrO2-Al203 Prepared by Hydrothermal Synthesis Method

The Ni/CeO2-ZrO2-A12O3 catalyst with different A12O3 and NiO contents were prepared by hydrothermal synthesis method. The catalytic performance for CO2 reforming of CH4 reaction, the interaction among components and the relation between Ni content and catalyst surface basicity were investigated. Results show that the interaction between NiO and A12O3 is stronger than that between NiO and CeO2-ZrO2. The addition of A12O3 can prevent the formation of large metallic Ni ensembles, increase the dispersion of Ni, and improve catalytic activity, but excess A12O3 causes the catalyst to deactivate easily. The interaction between NiO and CeO2 results in more facile reduction of surface CeO2. The existence of a small amount of metallic Ni can increase the number of basic sites. As metallic Ni may preferentially reside on the strong basic sites, increasing Ni content can weaken the catalyst basicity.     

Methane reforming With CO2 to syngas over CeO2-promoted Ni/Al2O3-ZrO2 catalysts Prepared Via a direct sol-gel process

CeO2-promoted Ni/Al2O3-ZrO2 (Ni/Al2O3-ZrO2-CeO2) catalysts were prepared by a direct sol-gel process with citric acid as gelling agent. The catalysts used for the methane reforming with CO2 was studied by infrared spectroscopy (IR), thermal gravimetric analysis (TGA), microscopic analysis, X-ray diffraction (XRD) and temperature-programmed reduction (TPR). The catalytic performance for CO2 reforming of methane to synthesis gas was investigated in a continuous-flow micro-reactor under atmospheric pressure. TGA, IR, XRD and microscopic analysis show that the catalysts prepared by the direct sol-gel process consist of Ni particles with a nanostructure of around 5 nm and an amorphous-phase composite oxide support. There exists a chemical interaction between metallic Ni particles and supports, which makes metallic Ni well dispersed, highly active and stable. The addition of CeO2 effectively improves the dispersion and the stability of Ni particles of the prepared catalysts, and enhances the adsorption of CO2 on the surface of catalysts. The catalytic tests for methane reforming with CO2 to synthesis gas show that the Ni/Al2O3-ZrO2-CeO2 catalysts show excellent activity and stability compared with the Ni/Al2O3 catalyst. The excellent catalytic activity and stability of the Ni/Al2O3-ZrO2-CeO2 are attributed to the highly, uniformly and stably dispersed small metallic Ni particles, the high reducibility of the Ni oxides and the interaction between metallic Ni particles and the composite oxide supports.     

Effect of CeO2 on the catalytic performance of Ni/Al2O3 for autothermal reforming of methane

The effect of promoter Ce on the catalytic performance of Ni/Al2O3 catalyst for autothermal reforming of methane to hydrogen was investigated. The catalysts were characterized by X-ray diffraction （XRD）, temperature-programmed reduction （TPR）, and X-ray photoelectron spectroscopy （XPS）. The results indicated that the catalytic performance of the catalysts was improved with the addition of Ce. Ni/Ce30Al70Oδ showed the highest CH4 conversion in operation temperatures ranging from 650 ℃ to 850 ℃. At the same time, the decrease in H2/CO ratio with increasing reaction temperature was consistent with the fact that water-gas shift reaction was thermodynamically unfavorable at higher temperatures. The XRD result indicated that adding Ce to Ni/Al2O3 catalyst prevented the formation of NiAl2O4 and facilitated the formation of NiO. The formation of NiO increased the number of active sites, resulting in higher activity. Comparing the TPR profiles of Ni/Ce30Al70Oδ with Ni/Al2O3, it could be clearly observed that with the addition of Ce, the total reduction peak areas in the middle and low temperatures increased. It was most probably that the addition of Ce inhibited the stronger interaction between Ni and Al2O3 to form the phase of NiAl2O4, and favored the formation of the strong interaction between NiO species and CeO2. Therefore, the addition of Ce to the Ni/Al2O3 catalyst increased the active surface that promoted the activity of the catalyst.     

Ni/Ce-Zr-Al-O催化剂的表面碱性和CO2＋CH4重整性能

用水热法制备了不同NiO含量的Ni/Ce-Zr-Al-O催化剂.用H2-TPD (程序升温脱附),DRIFTS(漫反射红外傅立叶变换光谱),CO2-TPD等方法考察了NiO的含量对催化剂表面碱性的影响,并和反应稳定性以及抗积碳性能相关联.H2-TPD结果表明,随NiO含量的增加,催化剂表面的Ni含量增加.DRIFT和CO2-TPD结果表明CO2的化学吸附主要是碳酸盐和碳酸氢盐形式.添加少量Ni能够使表面碱性位数量显著增加,碱强度减弱.Ni可能优先占据在催化剂表面较强的碱性位上,再增加Ni的含量则会使碱强度减弱,碱性位有所减少,降低CO2的吸附性能,从而减弱从CO2获得活动氧以消碳的能力.这种作用使NiO含量为7.0％(w)的样品活性随反应进行而减低,积碳量是NiO含量为4.0％(w)的样品的3.7倍.     

CH4,CO2和O2制合成气反应中载体对Ni催化剂抗氧化性能的影响

在ＣＨ４、ＣＯ２ 催化氧化制合成气反应中, Ｎｉ／Ａｌ２Ｏ３ 催化剂在高温下生成ＮｉＡｌ２Ｏ４ 尖晶石,是导致催化剂失活的一个重要因素． 通过向载体（Ａｌ２Ｏ３）中添加各种氧化物, 使得催化剂的抗氧化性能得到改善． 并运用ＴＰＲ、ＸＲＤ对催化剂进行表征, 发现催化剂的抗氧化性顺序为： Ｎｉ／ＣａＯ－Ａｌ２Ｏ３ ＞ Ｎｉ／ＭｇＯ－Ａｌ２Ｏ３ ＞ Ｎｉ／ＣｅＯ２－Ａｌ２Ｏ３ ＞ Ｎｉ／Ｌａ２Ｏ３－Ａｌ２Ｏ３ ＞ Ｎｉ／Ｙ２Ｏ３－Ａｌ２Ｏ３ ＞ Ｎｉ／ＴｉＯ２－Ａｌ２Ｏ３＞ Ｎｉ／Ａｌ２Ｏ３＞ Ｎｉ／Ｆｅ２Ｏ３－Ａｌ２Ｏ３．     

氮气气氛下焙烧的CeO_2载体负载Ni基催化剂的顺酐加氢性能研究

在氮气气氛中合成了具有较高氧缺陷浓度的CeO_2载体,采用浸渍法制备了Ni含量为10%的Ni/CeO_2-N催化剂,考察了其顺酐液相加氢性能,并与氧气气氛中制得的CeO_2载体负载Ni催化剂作了对比.N_2低温物理吸脱附,X-射线衍射,拉曼光谱,H_2程序升温还原等表征手段表明,在氮气气氛中合成的CeO_2具有较高浓度的氧缺陷位,在催化剂还原过程中可促进NiO物种的还原,同时在催化剂表面生成更多的氧缺陷位.该氧缺陷位可与活性金属Ni物种协同作用,显著提高催化剂的C=C及C=O加氢活性.     

EFFECTS OF RARE EARTH OXIDES ON PERFORMANCES OF Ni/Al_2O_3 CATALYSTS FOR METHANE STEAM REFORMING REACTION

The Catalytic performances for methane steam reforming reaction ofNi/Al_2O_3(commercial), Ni/Al_2O_3 (developed surface )and Ni/Al_2O_3-R_xO_y (R israre earth oxide) Catalysts were investigated by means of X-ray diffraction,TG, SEM/ X-ray analysis, pulse gas chromatography,BET and Mercuryporsiniter techniques. The distribution of rear earth oxides on the supports,themetal-support (additives) interaction and the influence of rare earth oxideadditives on the dispersion of active components,catulytic activities,variationof nickel crystallites size,CO chemisorption,formation of NiAl_2O_4 as well asthe reducibility of the catalysts were examined.The presence of rare earthoxides in the Ni/Al_2O_3 (developed surface) results in great improvement ofstubility through suppressing the growth of Ni crystallites,the oxidation of themetallic Ni and the formation of NiAl_2O_4. The effect of heavy rare earth oxidesis more distinct than that of the light ones.Strong metal support interaction(SMSI) exists in Ni/Al_2O_3- R     

钙改性的Pd/CeO2-ZrO2-Al2O3催化剂催化甲醇裂解反应

采用共沉淀法制备了未改性的和Ca掺杂的CeO2-ZrO2-Al2O3样品,进一步用浸渍法制备了Pd/CeO2-ZrO2-Al2O3(Pd/CZA)和Pd/CeO2-ZrO2-Al2O3-CaO (Pd/CZACa)催化剂.运用X射线衍射、N2吸附-脱附、储氧量测定、CO化学吸附、NH3程序升温脱附、CO2程序升温脱附、...     

PROMOTING EFFECT OF RARE EARTH OXIDES ON Ni/Re_xO_y-Al_2O_3 CATALYST FOR PARTIAL OXIDATION OF METHANE TO SYNTHESIS GAS

IntroductionSynthesisgas(HZ CO)isproducedfrommethanemoshybysteamrefonningwhichsuffersfromlimitationssuchasveryhighenergyrequirements,complicatedequipmentandinstallations,highHZ/COproductratioandpoorselectivityforcarbonmonoxide.Recently,manyresearchershave…     

流化床甲烷部分氧化制合成气Ni催化剂及助剂La的作用

在流化床中,考察了不同Ni担载量的Ni/γ-Al2O3催化剂对POM反应的催化性能,以8％Ni最佳,TPR结果表明。催化剂表面主要有两种化学状态的NiO。当镍担载量≤2％时,催化剂表面 仅存在一种高温下才能被还原的NiO,在Ni催化剂中添加La,可削弱NiO与载体间的相互作用,并且可减缓在CH4＋O2气氛下升温过程中NiO与载体发生强相互作用 生成NiAl2O4,因此添加La的Ni催化剂在750℃就能引发甲烷部分氧化（POM）反应,且反应引发后可获得与经700℃H2还原后的Ni^0催化剂相同的反应性能。     

助剂对Cu-Mn复合氧化物整体式催化剂催化低浓度甲烷燃烧反应性能的影响

以堇青石蜂窝陶瓷(COR)为载体,采用浸渍法制备了Cu-Mn-O/A12O3/COR,Cu-Mn-Ce-O/Al2O3/COR,Cu-Mn-Zr-O/Al2O3/COR,Cu-Mn-La-O/A12O3/COR和Cu-Mn-Ce-Zr-O/Al2O3/COR5种Cu-Mn复合氧化物整体式催化剂,用于低浓度甲烷催化燃烧反...     

水热法制备Ni/ Zr0.4Ce0.6O2-Al2O3催化剂上CH4-CO2重整反应研究: NiO含量的影响

采用水热合成法制备不同NiO含量的Ni/Zr0.4Ce0.6O2-Al2O3催化剂，使用X射线衍射（XPD）和H2的程序升温还原（H2-TPR）对样品进行表征，研究了NiO的含量对催化剂结构和CH4-CO2重整性能的影响。结果表征表明，少量Ni组分能在催化剂表面分散并进入CeO2-ZrO2固熔体晶格间隙而被固熔体包裹，并使固熔体晶粒变小，促进了固熔体的低温还原，而过量的NiO暴露在外生成NiO颗粒。活性测试结果表明，NiO含量少的样品活性随反应进行有较高的增长。选择适当空速，能使CH4-CO2以1：1反应。     

CeO2、CaO助剂对甲烷部分氧化制合成气Ni/MgOAl2O3催化剂结构和性能的影响

采用BET、H2 TPR、XRD、TEM和活性评价等表征手段，考察了CeO2、CaO助剂对Ni/MgOAl2O3催化剂物化性质和甲烷部分氧化制合成气反应性能的影响。实验结果表明，单独加入CeO2或CaO助剂可以改善Ni/ MgOAl2O3催化剂中镍物种的还原性能，以CaO尤为明显；CaO作为结构助剂可以降低还原态催化剂中的镍晶粒尺寸，使改性的催化剂具有较好的活性，而CeO2对催化剂的活性未产生显著影响。当CeO2与CaO两种助剂同时对Ni/MgOAl2O3进行改性时，虽然催化剂中镍物种的还原性能没有发生明显变化，但仍具有很好的反应性能，这与CeO2与CaO能够形成CaO-CeO2固溶体有关。CaO-CeO2固溶体不仅与镍物种间存在相互作用，提高了镍物种的分散度、减小了镍晶粒尺寸，还可以提高催化剂的储氧能力和晶格氧的流动性，从而有利于改善其甲烷部分氧化反应性能。     

水蒸汽对Ni/CeO2-ZrO2-Al2O3催化剂上CO2+CH4重整反应的影响

The Ni/CeO2 -ZrO2 -Al2O3 catalyst was prepared with the hydrothermal method. The catalytic performance for the CO2 reforming of CH4 reaction with or without small amount of steam was tested and the amount of coke deposition was measured. The XAFS of Ni K-edge was attained. The results show that the formation of CeAlO3 occurs in reaction,but the coke deposition is responsible for the deactivation of the catalyst. The addition of steam into feed gas can decrease the amount of coke deposition,and promote the stability. Due to the carbon atom penetration into the Ni lattice,for the catalyst sample after reaction without the addition of steam into feed gas,the coordination number of the first Ni-Ni shell decreases sharply. For the catalyst sample after reaction with the addition of steam in feed gas,the coordination numbers of the first Ni-Ni shell decrease slightly. It is due to the addition of steam into feed gas,which can suppress the coke formation and maintain the metallic structure of active Ni metal.     

低水碳比条件下 Ni/CeO2/Al2O3催化剂上液化石油气的预重整

采用硝酸盐溶液共浸渍薄水铝石制备了不同Ni含量的Ni/CeO2/Al2O3催化剂,并采用X射线衍射、N2物理吸附和程序升温还原等手段对其进行了表征.结果表明,Ni和CeO2物种之间存在较强的相瓦作用,CeO2的加入有利于NiAl2O4还原成金属Ni,而金属Ni又促进了CeO2还原并与Al2O3反应形成CeAlO3.详细...     

Autothermal reforming of methane over Ni catalysts supported over ZrO2-CeO2-Al2O3

Ni catalysts supported on Al2O3, ZrO2-Al2O3, CeO2-Al2O3 and ZrO2-CeO2-Al2O3 were prepared by coprecipitation method, and their catalytic performances for autothermal reforming of methane to hydrogen were investigated. The Ni-supported catalysts were characterized by XRD, TPR and XPS. The relationship between the structures and catalytic activities of the catalysts was discussed. The results showed that the catalytic activity and stability of the Ni/ZrO2-CeO2-Al2O3 catalyst was better than those of other catalysts with the highest CH4 conversion, H2/CO and H2/COx ratio at 750 ℃. The catalyst showed a little deactivation along the reaction time during its 72 h on stream with the mean deactivation rate of 0.08%/h. The catalytic performance of the Ni/ZrO2-CeO2-Al2O3 catalyst was also affected by reaction temperature, no2 ： nCH4 molar ratio and nH2O ： nCH4 molar ratio. TPR, XRD and XPS measurements indicated that the formation of ZrO2-CeO2 solid solution could improve the dispersion of NiO, and inhibit the formation of NiAl2O3, and thus significantly promoted the catalytic activity of the Ni/ZrO2-CeO2-Al2O3 catalyst.     

Ni/Al2O3催化剂上甲烷部分氧化制合成气反应机理

用变应答／质谱在线检测技术研究了Ｎｉ／Ａｌ２Ｏ３催化剂上甲烷部分氧化制合成气的反应要理，研究结果指出，在常压９７３Ｋ条件下，Ｎｉ／Ａｌ２Ｏ３催化剂上甲烷部分氧化制合成气按直接氧化机理进行，Ｈ２和Ｃ烛甲烷部分氧化的一次产物，其主要反应可表示如下：１．ＣＨ４＋ｘＮｉ－ＮｉｘＣ＋２Ｈ２，２．Ｏ２＋２Ｎｉ－２ＮｉＯ，３．ＮｉｘＣ＋ＮｉＯ－ＣＯ＋（ｘ＋１）Ｎｉ。     

EFFECT OF La_2O_3 AND CeO_2 ON CH_4-CO_2 REFORMING NICKEL CATALYST

IntroductionConsiderableattelltionisno\vbeillgpaidtotheCO7refonningof.etha..llto]forseveralreasonst(l)withthedevelopmentofindustrics.moreandnlorcCOZIsabettedintotheatmosphere,leadingto"greenhouseeffect",whichhasbroughtaboutgreatilltcreslallovertheworld.Th…     

掺杂助剂Ce和Zr的Ni/Al2O3催化剂的X光电子能谱分析

以Na2CO3为沉淀剂,在pH 9.0的沉淀条件下,采用并流沉淀法制备了Ni/Al2O3、Ni/CeO2-Al2O3、Ni/ZrO2-Al2O3和Ni/ZrO2-CeO2-Al2O34种催化剂,催化剂中Ni负载量(质量分数)为10%。采用XPS表征手段及常压固定床反应器对催化剂进行活性评价,考察了助剂Ce和Zr及二者的协同作用对Ni基催化剂表面物种结合能的影响以及对甲烷自热重整制氢反应性能的影响。结果表明,助剂Ce和Zr的添加及二者的协同作用对Ni基催化剂表面各物种的结合能均有一定的影响,结合评价结果可知,Ce和Zr二者的协同作用对Ni基催化剂的催化性能提高最大。     

NiO/WO3/TiO2-Al2O3催化剂上正庚烷的临氢异构化

采用溶胶凝胶法制备了TiO2-Al2O3复合载体,用分步浸渍法制备了NiO/WO3/TiO2-Al2O3催化剂。 在常压连续流动固定床反应器上考察了NiO/WO3/TiO2-Al2O3对正庚烷临氢异构化反应的催化性能。 研究了催化剂中WO3含量、Ni含量、焙烧温度和还原温度及催化反应温度对临氢异构化反应的影响。 采用XRD和BET方法对催化剂进行了表征。 结果表明,当w(WO3)=25%、w(Ni)=10%时,所制备的NiO/WO3/TiO2-Al2O3催化剂对正庚烷异构化反应的催化性能最好,活性可达15.50%,选择性可达84.06%。