固相微萃取法在环境监测中的应用

固相微萃取技术(SPME)作为一种样品前处理技术,具有方便、快捷、不使用有机溶剂、灵敏、价廉等优点,已被广泛地应用于环境样品的分析。综合评述了采用SPME法对3种环境基质(气态、水体、固态)中的有机物、无机离子等近百余种污染物的监测情况,并对SPME法在环境监测中的应用进行了展望。     

固相微萃取技术的进展及其在食品分析中应用的现状

固相微萃取(SPME)是当今色谱分析中使用极为广泛的样品前处理方法,这一技术将萃取、浓缩、解吸、进样等功能集于一体,灵敏度高且操作简便。该文简要介绍了近年来SPME涂层、装置及相应技术的演变,综述了SPME在国内外食品分析中的应用现状,并讨论了国内部分研究者在采用这一技术进行定量分析时存在的一些共性问题。     

烟用浸膏香味成分分析对比研究

应用同时蒸馏萃取(SDE)、液-液连续草取(LLE)、固相微萃取(SPME)三种方法分析了烟草浸膏香味成分,并对分析结果进行了对比研究。结果表明：SDE和LLE适于较精确的分析,但对某些成分缺乏足够灵敏度;SPME可弥补SDE和LLE的不足之处,但重现性较差,不适于严格的分析研究：同时,由于不同极性SPME纤维萃取头对样品有不同适应性,故需要认真地对其进行最适的选择。     

固相微萃取气相色谱法测定水产品中五氯苯酚及其钠盐残留量

采用自动固相微萃取(Automated SPME)超声波辅助萃取技术(UE)与气相色谱联用测定水产品中五氯苯酚及其钠盐残留量.实验优化了SPME直接萃取技术,样品调pH 2,超声波40℃萃取30 min后,用85μm聚丙烯酸酯(PA)萃取头90℃自动搅拌萃取30 min,270℃解吸5 min.最低检出量为0.01μg/kg;五氯苯酚线性范围0.001～10 μg/L,r=0.9999;对鳕鱼加标五氯苯酚1.0、5.0μg/kg回收率分别为71.0%～80.0%、77.2%～91.4%,相对标准偏差(RSD)为6.3%和8.6%(n=3).该方法简便、灵敏、稳定,无溶剂污染,是测定水产品中五氯苯酚及其钠盐残留量的理想方法.     

SDE与SPME在分析水体中有机氯农药的对比

就水体中有机氯农药的分析对比了一滴溶剂萃取(SDE)与固相微萃取(SPME)两种预处理技术，并对影响SDE的因数(萃取溶剂、萃取时间、萃取温度和搅拌速度)进行了条件优化。结果表明，优化后的SDE不仅在相同的浓度范围内有更好的线性关系(相关系数为0．9976～0．9999)，且增宽了β-666和P，P‘-DDT的线性范围，降低了β-666、γ-666、δ-666和P，P‘-DDT的检出限，用SDE-GC-μECD检测水体中有机氯农药残留方法是简单快速、经济廉价、准确可行。     

自动固相微萃取(SPME)GC-MS、GC-MS-MS法检测环境水中有机磷杀虫剂的研究

固相微萃取(solid-phasemicroextraction,SPME)是20世纪90年代发展起来的一种样品前处理技术,与传统的液-液提取、液-固提取相比,SPME更适用于提取、浓缩液态或气态的挥发性和半挥发性物质,SPME技术可将采样、萃取、浓缩和样本引入集中于一个步骤完成,尤其随着自动SPME与GC-MS等联用技术的日益完善,使SPME技术优点得到更充分的发挥。     

采用溶胶-凝胶技术涂层的新型固相微萃取方法及其应用

将溶胶-凝胶技术应用于SPME固相涂层的制备,涂制的端羟基-聚二甲基硅氧烷固相涂层热稳定性好,萃取时间和解吸时间短,对极性化合物及非极性化合物均有较强的萃取富集能力。扫描电镜图显示涂层表面为多孔结构。采用该涂层的SPME方法在对环境样品的分析中获得了令人满意的效果。     

羟基聚甲基苯基硅氧烷固相微萃取纤维的制备及在蔬菜中农药残留分析的应用

通过合成羟基聚甲基苯基硅氧烷(PMPS-OH)材料,制备固相微萃取(SPME)纤维涂层.通过与商品化聚二甲基硅氧烷(PDMS)、聚丙烯酸酯(PA)和PDMS/聚二乙烯基苯(DVB)纤维对六六六异构体(α,β,γ,δ-BHC)、DDT及其衍生物(p,p′-DDD,p,p′-DDE,o,p′-DDT,p,p′-DDT)、联苯菊酯、甲氰菊酯、高效氟氯氰菊酯、三氟氯氰菊酯、氯氰菊酯和氰戊菊酯等选定农药萃取效果的比较,所制备的PMPS-OH纤维具有更好的萃取效率.对SPME实验条件进行了研究和优化,测定方法对各种农药的线性范围多在0.01～2 ng/g之间,相应的检出限在0.001～0.05 ng/g范围,回收率在50.5%～103%.方法已被应用于蔬菜样品中农残的检测.     

固相微萃取-高效液相色谱-荧光检测法测定番茄中的多菌灵和噻菌灵

建立了应用固相微萃取(SPME)-高效液相色谱(HPLC)-荧光检测法测定番茄中多菌灵(MBC)和噻菌灵(TBZ)的分析方法。考察了萃取纤维、萃取时间、萃取温度、解吸时间、解吸液组成、解吸模式、pH值、有机溶剂和离子强度对MBC和TBZ萃取效率的影响,对SPME条件和色谱条件进行了优化。SPME在室温下进行,采用65 μm聚二甲基硅氧烷/二乙烯苯（PDMS/DVB）萃取纤维,萃取溶液中加入100 g/L NaCl,搅拌速度为1100 r/min,萃取时间为50 min。将该法用于番茄中MBC和TBZ的测定,MBC和TBZ的定量线性范围均为0.01~1.0 mg/kg;线性相关系数分别为0.9958和0.9967;检出限分别为0.003和0.001 mg/kg;回收率分别为83.5%和85.6%(n=5),相对标准偏差(RSDs)分别为6.5%和3.8%。该方法操作简单,无需使用有机溶剂,适于分析番茄样品中的MBC和TBZ。     

顶空固相微萃取-气相色谱法测定油脂中浸出油溶剂残留的方法研究

采用新型溶胶 凝胶富勒烯涂层的固相微萃取(SPME)探头,建立了顶空固相微萃取 气相色谱法(HS SPME GC)测定食用植物油中溶剂残留主要成分正己烷的方法,并对萃取条件进行了优化,方法的检出限为1.47μg kg(S N=5),RSD=1.9%(n=7),加标回收率为88.4%～102.1%。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.