气相色谱-脉冲放电氦离子化检测器法同时测定乙烯或丙烯中5种无机气体

用带脉冲放电氦离子化检测器的气相色谱法同时测定乙烯或丙烯中氢气、氧气、二氧化碳、一氧化碳和氮气等5种无机气体的含量。充分气化的样品注入色谱仪,借助仪器的高度集约化操作程序及阀系统切换功能,样品流经2根微填充色谱柱,先后使氢气、氧气、二氧化碳、一氧化碳和氮气等5种气体得到分离和测定。这5种气体的体积分数均在0.50～10.0mL·m~(-3)内与其对应的峰面积呈线性关系,上述5种气体的检出限(3S/N)依次为0.02,0.01,0.02,0.03,0.01mL·m~(-3)。对一组5种气体的混合标准气体进行8次重复测定,其保留时间的相对标准偏差在0.040%～0.15%之间,其峰面积的相对标准偏差在0.98%～2.3%之间,证明此方法同时测定5种气体的重复性良好。对另一组5种气体的混合标准气体进行6次平行测定,测定值与已知值相符,测定值的相对标准偏差(n=6)均小于1.0%。     

原子吸收分光光度法测定铅基合金中铜镍锌镉钴锰锑铋

铅基合金中元素的快速测定在电子工业及其它行业中十分重要,而用原子吸收法测定这些元素含量是一种重要工具。但铅基合金的主要成分铅、锡和锑难以溶解,致使试样处理时间长。采用通常的酸溶解法,由于铅、锡或锑引起沉淀而影响测定。采用四氟硼酸加过氧化氢加热溶解则可避免之,可直接快速地测定上述元素。实验表明,四氟硼酸浓度在5%(V/V)之内对镉、钴、铋测定无影响;在4%以内对锌的测定明显增高;在2—5%对锰、铜测定无影响;在3—5%以内对镍、锑测定无影响,为此要求试样与标准溶液     

高效液相色谱/电化学检测法测定大鼠下丘脑的组胺和5-羟色胺

采用高效液相电化学检测的方法测定了大鼠下丘脑内组胺和5_羟色胺。色谱柱为NUCLEOSILRC18(250mm×4mm ,10μm) ,流动相 :磷酸二氢钠溶液 (25mmol/L ,内含乙二胺四乙酸二钠0.5mmol/L ,辛烷磺酸钠3mmol/L,pH4.8) -乙腈=100∶14(体积比 ) ,流速0.8mL/min,检测电位0.6V。大鼠下丘脑匀浆液经低温高速离心 ,上清液直接进样测定5_羟色胺 ,另取上清液衍生后进样测定组胺。组胺在0.075～1.8μg/mL ,5_羟色胺在0.0625～1.25μg/mL浓度范围内 ,线性关系良好。组胺测定的日内和日间相对标准偏差分别小于1.0%和11.4 %,5_羟色胺测定的日内和日间相对标准偏差分别小于3.4 %和6.3 %,两者回收率分别为94.1 %～102.3%和72.8 %～89.1 %。正常雄性SD大鼠下丘脑内组胺和5_羟色胺的平均含量分别为0.280±0.029μg/mL和0.224±0.068μg/mL。本法简便、准确、快捷 ,可用于大鼠下丘脑内组胺和5_羟色胺的测定     

高效液相色谱法同时测定食品中安赛蜜、糖精、苯甲酸、山梨酸和咖啡因

用KromasilC1 8柱 ,以甲醇 :0 .5g/L柠檬酸铵 (42 5 :5 75 )为流动相 ,在波长 2 1 5nm ,柱温 40℃下测定了食品中的安赛蜜、糖精、苯甲酸、山梨酸和咖啡因。方法RSD 0 .6 2 %～ 1 48% ,回收率 1 0 0 .7%～ 1 0 3 % ,相关系数r>0 .9998;应用于可乐、汽水、果奶等测定。     

多金属矿中微量锡的测定

锡(Ⅳ)-邻苯二酚紫(PV)-溴化十六烷基三甲铵(CTMAB)体系光度法已有效地用于金属镉、铁矿等物料中微量锡的测定。本文在前人工作的基础上研究多金属矿中微量锡的测定,解决了工作曲线不通过零点的问题,提高了测定微量锡的精密度和准确度。标准配制移取含锡0,2.5,5,10,15,20,25微克的标准溶液(5%硫酸-5%柠檬酸溶液配制)置于一系列50毫升容量瓶中,补加5%硫酸-5%柠檬酸至体积为10毫升,加入2毫升5%抗坏血酸溶液、5毫升含有PV和CTMAB的混合液(0.02%PV:     

蒸馏-催化极谱法测定复杂物料中微量砷

提出了用催化极谱法测定复杂物料中微量砷的含量。选择测定的溶液介质中含碲(Ⅳ)硫酸溶液5mL和150g.L-1碘化钾溶液5mL。仪器扫描速率为250mV.s-1,并采用二阶导数测定。试样(0.01～1.0g)用氯酸钾0.5g、氢氟酸5滴、硝酸5～10mL溶解,用蒸馏法分离其中的砷。砷的质量浓度在0.4mg·L-1以内与相应的峰电流呈线性关系。按此方法测定了12个矿样中砷含量,其测定值与已知值相符。方法的回收率在97%～100%之间,相对标准偏差(n=6)在2.3%～7.2%之间。     

气相色谱直接进样法分析环己烷氧化废液中的有机酸

环己烷氧化废液经酸化、抽滤等预处理后 ,采用气相色谱直接进样法分离了样品中的 1 0种有机酸 ,并测定了其含量。测定废液中各有机酸的回收率在 95 %～ 1 0 5 %之间。气相色谱固定相为 5 %新戊二醇己二酸酯 +0 .2 %磷酸/1 0 1酸洗白色担体。     

气质联用法测定烟用包装膜中的己二酸酯

建立了乙酸乙酯超声萃取、气相色谱-质谱联用法同时测定烟用包装膜中的5种己二酸酯类增塑剂的方法。结果表明,己二酸酯类化合物在0.1～5.0μg·mL-1浓度范围内线性关系良好,5种己二酸酯类的检测限为0.0053～0.0222mg.kg-1,RSD(10%,回收率在76.86%～112.23%之间。该方法能够快速、准确地测定烟用包装膜中的5种己二酸酯类增塑剂。     

化学蒸气发生-四通道原子荧光光谱法同时测定水样中的痕量砷、锑、硒和汞

应用自行设计的化学蒸气发生-四通道无色散原子荧光光谱仪,建立了同时测定水样中As、Sb、Se、Hg的新方法.在实验中优化了四元素同时化学蒸气发生条件和测定的最佳工作参数.在样品预处理阶段用HCl将Se6+还原为Se4+,然后用质量浓度5 g/L硫脲将As5+和Sb5+还原为As3+和Sb3+.在最佳条件下,方法对As、Sb、Se、Hg的检出限分别为0.05、0.03、0.05、0.01 ng/mL(3d);RSD分别为0.42%、0.74%、0.97%、1.0%(对5 ng/mL As、Sb、Se和0.5ng/mL Hg混合标准,n=7).用所建立的方法对不同类型水样中的As、Sb、Se、Hg进行了同时测定,测定结果与用标准方法测定所得结果之间无明显差异,各元素的加标回收率在93%～105%.     

气相色谱-质谱法同时测定化妆品中5种香豆素类化合物

应用气相色谱-质谱选择离子法同时测定化妆品中5种香豆素(7-甲氧基香豆素、二氢香豆素、7-甲基香豆素、醋硝香豆素和7-乙氧基-4-甲基香豆素)。用无水乙醇为提取剂来进行超声快速提取,GC/MS进行测定,外标法定量。5种香豆素的平均回收率(n=10)在85.4%～107.6%之间,相对标准偏差在5.6%～11%之间。     

The preparation and some reactions of 2, 3, 5, 6-tetrachlorophenylmagnesium chloride

The reaction of pentachlorobenzene with metallic magnesium in THF at 10–15°C gives after hydrolysis 1, 2, 4, 5-tetrachlorobenzene (76%) and pentachlorobenzene (8%); after trimethylsilylation, 1, 2, 4, 5-tetrachloro-3-(trimethylsilyl)benzene (74%), pentachloro(trimethylsilyl)benzene (8%) and 1, 2, 4, 5-tetrachlorobenzene (6%); after iodination, 1, 2, 4, 5-tetrachloroiodobenzene (44%), pentachloroiodobenzene (12%) and 1, 2, 4, 5-tetrachlorobenzene (9%); and finally after carbonation, 2, 3, 5, 6-tetrachlorobenzoic acid (58%). These products indicate that in the Grignard reaction a mixture of largely 2, 3, 5, 6-tetrachlorophenylmagnesium chloride and some pentachlorophenylmagnesium chloride is formed. The formation pentachlorophenylmagnesium chloride is explained on the basis of metal—hydrogen exchange reaction between 2, 3, 5, 6-tetrachlorophenylmagnesium chloride and the unreacted pentachlorobenzene.     

(四甲基二硅撑)二(3-三甲硅基环戊二烯基)四羰基二铁及其相关化合物的合成及结构

1,2-二(三甲硅基环戊二烯基)四甲基二硅烷与Fe(CO)5在二甲苯中于105～110℃反应除分离到少量标题化合物(Me2SiSiMe2)[η-(3-Me3SiC5H3Fe(CO)]2(μ-CO)2(5)外,主要是生成了脱Me3Si基的产物(Me2SiSiMe2)[η-C5H4Fe(CO)]2(μ-CO)2(1)及1的热重排异构体[Me2SiC5H4-Fe(CO)2]2(2).将5的二甲苯溶液加热回流18h,则转化为其异构体[Me2Si(Me3SiC5H3)Fe(CO)2]2(6).脱硅基发生在由相应反应物制备5的过程中。且脱硅基是与反应物中(Me2SiSiMe2)桥的存在有关。5的晶体结构经X射线衍射测定属单斜晶系,P21/m空间群,晶体学数据:a=0.6780(1)nm,b=2.2303(9)nm,c=0.9988(1)nn,;β=98.96(1)°,V=1.4960nm3.Z=2,Dc=1.36g/cm3.     

Determination of silica in silicates by formation of 12-molybdosilicic acid and redox titration of molybdenum(III)

An indirect titrimetric method for the determination of silica in silicates is described. A boron trioxide-lithium carbonate (10:1) mixture is used as flux and the melt is dissolved in an acidic molybdate solution to form 12-molybdosilicic acid. The yellow complex is extracted with methyl isobutyl ketone (MIBK) and, after removal of the co-extracted molybdate reagent, is decomposed with alkali. The resultant aqueous phase is acidified and passed through a Jones reductor to convert the molybdenum(VI) into molybdenum(III), which is then titrated with potassium permanganate. The method has high precision and accuracy. Phosphorus, titanium, zirconium and vanadium, in amounts that may occur in silicate rocks, do not interfere; at least 5% P(2)O(5), 5% TiO(2), 2% ZrO(2) and 0.5% V(2)O(5) are permissible. Fluorine (at least 2%) can also be tolerated when lithium metaborate is used as flux.     

2-(4′-Fluorophenyl)imidazole. Nitration studies

Reactions of 2-(4′-fluorophenyl)imidazole ( 1 ) and related compounds under various nitrating conditions are discussed. With 90% nitric acid in 20% oleum at ?10°, 1 affords 2-(4′fluorophenyl)-4(5)-nitroimidazole ( 2 ) in 80% yield. Reaction of 2 with the same reagents at 25° affords 2-(4′-fluoro-3′-nitrophenyl)-4(5)-nitroimidazole ( 4 ) in 90% yield, whereas with 90% nitric acid in acetic acid at 95°, 2 affords 4,5-dinitro-2-(4′-fluorophenyl)imidazole ( 5 ) in 80% yield. Reaction of 1 with 70% nitric acid in concentrated sulfuric acid at 25° affords 2-(4′-fluorophenyl)-5-hyroximinoimidazolin-4-one ( 6 ), which rearranges and hydrolyzes to 5-(4′-fluorophenyl)-1,2,4-oxadiazole-3-carboxylic acid. A discussion of these reactions is presented.     

Mixed-metal cluster chemistry. 29. Core expansion and ligand-driven metal exchange at group 6-iridium clusters

Reactions of the tetrahedral clusters MoIr3(mu-CO)3(CO)8(eta-L) (L = C5HMe4, C5Me5) with the carbonylmetalate anions [Mo(CO)3(eta-L)]- afford the trigonal bipyramidal clusters Mo2Ir3(mu3-H)(mu-CO)2(CO)9(eta-L)2 (L = C5HMe4 (3c), 74%; L = C5Me5 (3d), 55%) in which the group 6 metal atoms occupy the apexes; reaction of the cyclopentadienylmolybdenum-containing analogues or their cyclopentadienyltungsten-containing homologues failed to afford analogous products. Reactions of MIr3(mu-CO)3(CO)8(eta-C5H5) (M = Mo, W) with [M(CO)3(eta-L)]- (L = C5HMe4, C5Me5) afford the core-expanded heteroapex clusters M2Ir3(mu3-H)(mu-CO)2(CO)9(eta-C5H5)(eta-L) (M = Mo, L = C5HMe4 (5c), 9%, L = C5Me5 (5d), 4%; M = W, L = C5Me5 (6d), 5%) in low yield, together with the homoapex clusters M2Ir3(mu3-H)(mu-CO)2(CO)9(eta-L)2 (M = Mo, L = C5HMe4 (3c), 81%, L = C5Me5 (3d), 60%; M = W, L = C5Me5 (4d), 5%) in much higher yield for the Mo-containing examples. The identities of clusters 3c,d, 4d, and 5c,d have been confirmed by single-crystal X-ray diffraction studies, with the same disposition of ligands about the trigonal bipyramidal cluster cores being observed in each case, a ligand arrangement that has been examined by complementary density functional theory studies. While cluster 5d is accessible as above, no reaction is observed from MoIr3(mu-CO)3(CO)8(eta-C5Me5) and [M(CO)3(eta-C5H5)]-. Treating MoIr3(mu-CO)3(CO)8(eta-C5H5) with 1 equiv of [M(CO)3(eta-C5Me5)]- affords 5d as the major product, a further 1 equiv affording some MoIr3(mu-CO)3(CO)8(eta-C5Me5) and a third 1 equiv giving a good yield of 3d. This is consistent with reaction proceeding by apex fragment addition, followed by apex fragment elimination, and finally a further apex fragment addition, the homometallic incoming apexes being distinguished from the departing vertices by their highly methylated cyclopentadienyl ligands. Spectroscopic data suggest that the electron density at these disparate-metal-containing cluster cores is tunable by progressive (conceptual) cyclopentadienyl alkylation.     

烟草中糖的毛细管区带电泳分离

 采用高效毛细管电泳 紫外吸收法 (HPCE UV) ,以对氨基苄腈为衍生试剂 ,通过改进缓冲溶液添加剂 ,对烟草中 5种糖的衍生物进行了分离。该法使用 pH 10 5 ,5 0mmol/L硼砂缓冲液 ,其中添加剂含量为甲醇 5 % (体积分数 ,下同 )、乙腈 5 %、乙二醇 2 5 %、异丙醇 2 5 %和十二烷基硫酸钠 (SDS) 1mmol/L。测定波长为 2 85nm。     

Atmospheric chemistry of C2F5CH2OCH3 (HFE-365mcf)

FTIR smog chamber techniques were used to measure k(Cl + C(2)F(5)CH(2)OCH(3)) = (2.52 ± 0.37) × 10(-11) and k(OH + C(2)F(5)CH(2)OCH(3)) = (5.78 ± 1.02) × 10(-13) cm(3) molecule(-1) s(-1) in 700 Torr of air diluent at 296 ± 1 K. The atmospheric lifetime of C(2)F(5)CH(2)OCH(3) is estimated to be 20 days. Reaction of chlorine atoms with C(2)F(5)CH(2)OCH(3) proceeds 18 ± 2% at the -CH(2)- group and 82 ± 2% at the -CH(3) group. Reaction of OH radicals with C(2)F(5)CH(2)OCH(3) proceeds 44 ± 5% at the -CH(2)- group and 56 ± 5% at the -CH(3) group. The atmospheric fate of C(2)F(5)CH(2)OCH(2)O radicals is reaction with O(2) to give C(2)F(5)CH(2)OCHO. The atmospheric fate of C(2)F(5)CH(O)OCH(3) radicals is C-C bond-cleavage to give C(2)F(5) radicals and CH(3)OCHO (methyl formate). The infrared spectrum was recorded and used to estimate a global warming potential of 6 (100 year time horizon) for C(2)F(5)CH(2)OCH(3).     

Generation and reactions of ruthenium phosphido complexes [(eta5-C5H5)Ru(PR'3)2(PR2)]: remarkably high phosphorus basicities and applications as ligands for palladium-catalyzed Suzuki cross-coupling reactions

Reactions of [(eta5-C5H5)Ru(PR'3)2(Cl)] with NaBAr(F) [BAr(F)-=B{3,5-[C6H3(CF3)2]}4-; PR'3=PEt3 or 1/2Et2PCH2CH2PEt2) (depe)] and PR2H (R=Ph, a; tBu, b; Cy, c) in C6H5F, or of related cationic Ru(N2) complexes with PR2H in C6H5F, gave the secondary phosphine complexes [(eta5-C5H5)Ru(PR'3)2(PR2H)]+ BAr(F)- (PR'3=PEt3, 3 a-c; 1/2depe, 4 a,b) in 65-91 % yields. Additions of tBuOK (3 a, 4 a; [D6]acetone) or NaN(SiMe3)2 (3 b,c, 4 b; [D8]THF) gave the title complexes [(eta5-C5H5)Ru(PEt3)2(PR2)] (5 a-c) and [(eta5-C5H5)Ru(depe)(PR2)] (6 a,b) in high spectroscopic yields. These complexes were rapidly oxidized in air; with 5 a, [(eta5-C5H5)Ru(PEt3)2{P(=O)Ph2}] was isolated (>99 %). The reaction of 5 a and elemental selenium yielded [(eta5-C5H5)Ru(PEt3)2{P(=Se)Ph2}] (70 %); selenides from 5 c and 6 a were characterized in situ. Competitive deprotonation reactions showed that 5 a is more basic than the rhenium analog [(eta5-C5H5)Re(NO)(PPh3)(PPh2)], and that 6 b is more basic than PtBu3 and P(iPrNCH2CH2)3N. The latter is one of the most basic trivalent phosphorus compounds [pK(a)(acetonitrile) 33.6]. Complexes 5 a-c and 6 b are effective ligands for Pd(OAc)2-catalyzed Suzuki coupling reactions: 6 b gave a catalyst nearly as active as the benchmark organophosphine PtBu3; 5 a, with a less bulky and electron-rich PR2 moiety, gave a less active catalyst. The reaction of 5 a and [(eta3-C3H5)Pd(NCPh)2]+ BF4- gave the bridging phosphido complex [(eta5-C5H5)Ru(PEt3)2(PPh2)Pd(NCPh)(eta3-C3H5)]+ BAr(F)- in approximately 90 % purity. The crystal structure of 4 a is described, as well as substitution reactions of 3 b and 4 b.     

Impressive structural diversity and polymorphism in the modular compounds ABi3Q5 (A = Rb, Cs; Q = S, Se, Te)

An outstanding example of structural diversity and complexity is found in the compounds with the general formula ABi(3)Q(5) (A = alkali metal; Q = chalcogen). gamma-RbBi(3)S(5) (I), alpha-RbBi(3)Se(5) (II), beta-RbBi(3)Se(5) (III), gamma-RbBi(3)Se(5) (IV), CsBi(3)Se(5) (V), RbBi(3)Se(4)Te (VI), and RbBi(3)Se(3)Te(2) (VII) were synthesized from A(2)Q (A = Rb, Cs; Q = S, Se) and Bi(2)Q(3) (Q = S, Se or Te) at temperatures above 650 degrees C using appropriate reaction protocols. gamma-RbBi(3)S(5) and alpha-RbBi(3)Se(5) have three-dimensional tunnel structures while the rest of the compounds have lamellar structures. gamma-RbBi(3)S(5), gamma-RbBi(3)Se(5), and its isostructural analogues RbBi(3)Se(4)Te and RbBi(3)Se(3)Te(2) crystallize in the orthorhombic space group Pnma with a = 11.744(2) A, b = 4.0519(5) A, c = 21.081(3) A, R1 = 2.9%, wR2 = 6.3% for (I), a = 21.956(7) A, b = 4.136(2) A, c = 12.357(4) A, R1 = 6.2%, wR2 = 13.5% for (IV), and a = 22.018(3) A, b = 4.2217(6) A, c = 12.614(2) A, R1 = 6.2%, wR2 = 10.3% for (VI). gamma-RbBi(3)S(5) has a three-dimensional tunnel structure that differs from the Se analogues. alpha-RbBi(3)Se(5) crystallizes in the monoclinic space group C2/m with a = 36.779(4) A, b = 4.1480(5) A, c = 25.363(3) A, beta = 120.403(2) degrees, R1 = 4.9%, wR2 = 9.9%. beta-RbBi(3)Se(5) and isostructural CsBi(3)Se(5) adopt the space group P2(1)/m with a = 13.537(2) A, b = 4.1431(6) A, c = 21.545(3) A, beta = 91.297(3) degrees, R1 = 4.9%, wR2 = 11.0% for (III) and a = 13.603(3) A, b = 4.1502(8) A, c = 21.639(4) A, beta = 91.435(3) degrees, R1 = 6.1%, wR2 = 13.4% for (V). alpha-RbBi(3)Se(5) is also three-dimensional, whereas beta-RbBi(3)Se(5) and CsBi(3)Se(5) have stepped layers with alkali metal ions found disordered in several trigonal prismatic sites between the layers. In gamma-RbBi(3)Se(5) and RbBi(3)Se(4)Te, the layers consist of Bi(2)Te(3)-type fragments, which are connected in a stepwise manner. In the mixed Se/Te analogue, the Te occupies the chalcogen sites that are on the "surface" of the layers. All compounds are narrow band-gap semiconductors with optical band gaps ranging 0.4-1.0 eV. The thermal stability of all phases was studied, and it was determined that gamma-RbBi(3)Se(5) is more stable than the and alpha- and beta-forms. Electronic band calculations at the density functional theory (DFT) level performed on alpha-, beta-, and gamma-RbBi(3)Se(5) support the presence of indirect band gaps and were used to assess their relative thermodynamic stability.     

Synthesis, structure, and reactivity of palladacycles that contain a chiral rhenium fragment in the backbone: New cyclometalation and catalyst design strategies

The bromocyclopentadienyl complex [(eta5-C5H4Br)Re(CO)3] is converted to racemic [(eta5-C5H4Br)Re(NO)(PPh3)(CH2PPh2)] (1 b) similarly to a published sequence for cyclopentadienyl analogues. Treatment of enantiopure (S)-[(eta5-C5H5)Re(NO)(PPh3)(CH3)] with nBuLi and I2 gives (S)-[(eta5-C5H4I)Re(NO)(PPh3)(CH3)] ((S)-6 c; 84 %), which is converted (Ph3C+ PF6 -, PPh2H, tBuOK) to (S)-[(eta5-C5H4I)Re(NO)(PPh3)(CH2PPh2)] ((S)-1 c). Reactions of 1 b and (S)-1 c with Pd[P(tBu)3]2 yield [{(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)Pd(mu-X)}2] (10; X = b, Br, rac/meso, 88 %; c, I, S,S, 22 %). Addition of PPh3 to 10 b gives [(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)Pd(PPh3)(Br)] (11 b; 92 %). Reaction of (S)-[(eta5-C5H5)Re(NO)(PPh3)(CH2PPh2)] ((S)-2) and Pd(OAc)(2) (1.5 equiv; toluene, RT) affords the novel Pd3(OAc)4-based palladacycle (S,S)-[(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)Pd(mu-OAc)2Pd(mu-OAc)2Pd(mu-PPh2CH2)(Ph3P)(ON)Re(eta5-C5H4)] ((S,S)-13; 71-90 %). Addition of LiCl and LiBr yields (S,S)-10 a,b (73 %), and Na(acac-F6) gives (S)-[(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)Pd(acac-F6)] ((S)-16, 72 %). Reaction of (S,S)-10 b and pyridine affords (S)-[(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)Pd(NC5H5)(Br)] ((S)-17 b, 72 %); other Lewis bases yield similar adducts. Reaction of (S)-2 and Pd(OAc)2 (0.5 equiv; benzene, 80 degrees C) gives the spiropalladacycle trans-(S,S)-[{(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)}2Pd] (39 %). The crystal structures of (S)-6 c, 11 b, (S,S)- and (R,R)-132 C7H8, (S,S)-10 b, and (S)-17 b aid the preceding assignments. Both 10 b (racemic or S,S) and (S)-16 are excellent catalyst precursors for Suzuki and Heck couplings.