化“材”为“筑”

Chemistry is a central, practical and creative discipline. The development of chemistry plays an important role in the progress of science and society, as well as the improvement of the quality of human life. This paper introduces the chemical knowledge of stone, concrete, glass and other inorganic nonmetallic building materials by the anthropomorphically story. Taking nanomaterials as an example, the prospect of building materials development in the future is put forward.     

"Alpha"-, "beta"- and "delta"-anhydrodigitoxigenin

The syntheses of 3β-hydroxy-5β-carda-14, 20:22-dienolide (= «β»-anhydro-), 3β-hydroxy-5β-carda-8:14, 20:22-dienolide (= «α»-anhydro-) and «δ»-anhydro-digitoxigenin (= probably 3β-hydroxy-5β, 14β-carda-8, 20:22-dienolide) by the best ways known to date, have been described. «δ»-Anhydro-digitoxigenin represents the thermodynamically most stable isomer. In this isomer the double bond in position 8 is unaffected by hydrogenation with Pt in acetic acid; with perbenzoic acid an epoxide results from which, on hydrogenation, the double bond can be regenerated in its original position. Analogous reactions are known to occur in the 8:14-epoxides.     

"Decoking" of a "coked" zeolite catalyst in a glow discharge

'Decoking' of a 'coked' zeolite catalyst in a glow discharge in oxygen is investigated. The 'decoking' process involves reactions of atomic oxygen (O atoms) with 'coke' and yields gases such as CO, CO₂ as well as other gaseous products that could be easily pumped out.Three different modes of discharge were investigated including a static mode, a flowing-gas mode, and a periodic-purge mode where the oxygen and other gaseous products of the discharge were replaced by fresh O₂ gas after short but regular intervals of time. In some cases, additional heating was also used to provide base temperatures of the order of 100 °C to facilitate penetration of oxygen atoms into the inner layers and cages of the zeolite catalyst.This paper presents some results of spectroscopic analytical techniques used to monitor the atomization of oxygen, oxidation of 'coke', and to confirm the process of 'decoking'. More specifically, radiation emission on the 3 s ⁵S– 3p ⁵P transitions of O around 777.2–777.5 nm were selected for monitoring the atomization of O₂. On the other hand, X-ray photo-electron spectroscopy (XPS) was used to determine the amount of residual carbon and extent of 'decoking'. Furthermore, evolution of CO and CO₂ gases as a function of time was systematically monitored in real time. For CO, the 451.1 nm band head belonging to the B¹ - A¹ bands of the Angstrom system of the CO spectrum was used, while for CO₂, the band head at 353.4 nm belonging to the CO₂⁺ spectrum was used. The rates of evolution of CO and CO₂ were related to the rate of 'decoking' of the catalyst. It is noted that in the periodic-purge mode, about 63% of the total yield of CO from a given sample of the catalyst appears in the first 3-min exposure to discharge whereas it takes up to 15 min to remove nearly 94% of the removable carbon under our experimental conditions.     

"Turn-on" fluorescent sensing with "reactive" probes

Chemical probes are valuable tools for the investigation of biochemical processes, diagnosis of disease markers, detection of hazardous compounds, and other purposes. Therefore, the development of chemical probes continues to grow through various approaches with different disciplines and design strategies. Fluorescent probes have received much attention because they are sensitive and easy-to-operate, in general. To realize desired selectivity toward a given analyte, the recognition site of a fluorescent probe is designed in such a way to maximize the binding interactions, usually through weak molecular forces such as hydrogen bonding, toward the analyte over other competing ones. In addition to such a supramolecular approach, the development of fluorescent probes that sense analytes through chemical reactions has witnessed its usefulness for achieving high selectivity, in many cases, superior to that obtainable by the supramolecular approach. Creative incorporations of the reactive groups to latent fluorophores have provided novel chemical probes for various analytes. In this feature article, we overview the recent progress in the development of turn-on fluorescent probes that are operating through chemical reactions triggered by target analytes. Various chemical reactions have been implemented in the development of many reactive probes with very high selectivity and sensitivity toward target analytes. A major emphasis has been focused on the type of chemical reactions utilized, with the hope that further explorations can be made with new chemical reactions to develop reactive probes useful for various applications.     

Making "wheels" and "cubes" from triangles

[Mn(IV)Mn(II)3] triangular units directed by the presence of tripodal alcohols self-assemble in the presence of azide and acetate ligands to form either a [Mn24] "wheel" or a [Mn32] "cube".     

营养化学课程翻转课堂的探索与实践

With its tailored learning content, flexible learning environment and directed teacher guidance, the flipped classroom in "nutrition chemistry" has effectively solved the problems of students' specialty, large number and limited time in the course of elective course. The teaching mode based on the cultivation of students' ability and the core of improving scientific literacy was constructed.     

Size evolution study of "molecular" and "atom-in-cluster" polarizabilities of medium-size gold clusters

A study on static polarizabilities for a family of gold clusters (Au(n), n = 6, 12, 20, 34, 54) is presented. For each cluster, a density functional theory perturbation theory calculation was performed to compute the cluster polarizability and the polarizability of each atom in the cluster using Bader's "quantum theory of atoms in molecules" formalism. The cluster polarizability tensor, α(cluster), is expressed as a sum of the atom-in-molecule tensors, α(cluster)=∑(Ω)α(Ω). A strong quadratic correlation (R(2) = 0.98) in the isotropic polarizability of atoms in the cluster and their distance to the cluster center of mass was observed. The cluster polarizabilities are in agreement with previous calculations.     

原子量之"变"

原子量是最为基础的科学概念之一,"国际纯粹与应用化学联合会(IUPAC)"之"同位素丰度和原子量委员会(CIAAW)"每两年会修订并发布一次原子量。自2009年起,IUPAC宣布某些元素的原子量不再是常数,这些元素的标准原子量为区间值。为方便使用,对于这些元素,给出一个合理的单一数值,称为常规原子量。何为标准原子量?何为常规原子量?为何某些元素的原子量出现区间值?依据原子量数值的特性,元素可以分为几大类?本文在介绍最新元素周期表中原子量的特点之后,简述原子量测定、标准确定、概念演变的发展历史,讨论原子量的修订与变化等问题。     

Fabrication of "roll-off" and "sticky" superhydrophobic cellulose surfaces via plasma processing

Most of the artificial superhydrophobic surfaces that have been fabricated to date are not biodegradable, renewable, or mechanically flexible and are often expensive, which limits their potential applications. In contrast, cellulose, a biodegradable, renewable, flexible, inexpensive, biopolymer which is abundantly present in nature, satisfies all the above requirements, but it is not superhydrophobic. Superhydrophobicity on cellulose paper was obtained by domain-selective etching of amorphous portions of the cellulose in an oxygen plasma and subsequently coating the etched surface with a thin fluorocarbon film deposited via plasma-enhanced chemical vapor deposition using pentafluoroethane as a precursor. Variation of plasma treatment yielded two types of superhydrophobicity : "roll-off" (contact angle (CA), 166.7 degrees +/- 0.9 degrees ; CA hysteresis, 3.4 degrees +/- 0.1 degrees ) and "sticky" (CA, 144.8 degrees +/- 5.7 degrees ; CA hysteresis, 79.1 degrees +/- 15.8 degrees ) near superhydrophobicity. The nanometer scale roughness obtained by delineating the internal roughness of each fiber and the micrometer scale roughness which is inherent to a cellulose paper surface are robust when compared to roughened structures created by traditional polymer grafting, nanoparticle deposition, or other artificial means.     

Switching "on" and "off" the expression of chirality in peptide rotaxanes

The hydrogen-bond-directed synthesis, X-ray crystal structures, and optical properties of the first chiral peptide rotaxanes are reported. Collectively these systems provide the first examples of single molecular species where the expression of chirality in the form of a circular dichroism (CD) response can selectively be switched "on" or "off", and its magnitude altered, through controlling the interactions between mechanically interlocked submolecular components. The switching is achievable both thermally and through changes in the nature of the environment. Peptido[2]rotaxanes consisting of an intrinsically achiral benzylic amide macrocycle locked onto various chiral dipeptide (Gly-L-Ala, Gly-L-Leu, Gly-L-Met, Gly-L-Phe, and Gly-L-Pro) threads exhibit strong (10-20k deg cm(2) dmol(-1)) negative induced CD (theta;) values in nonpolar solvents (e.g. CHCl(3)), where the intramolecular hydrogen bonding between thread and macrocycle is maximized. In polar solvents (e.g., MeOH), where the intercomponent hydrogen bonding is weakened, or switched off completely, the elliptical polarization falls close to zero in some cases and can even be switched to large positive values in others. Importantly, the mechanism of generating the switchable CD response in the chiral peptide rotaxanes is also determined: a combination of semiempirical calculations and geometrical modeling using the continuous chirality measure (CCM) shows that the chirality is transmitted from the amino acid asymmetric center on the thread via the macrocycle to the C-terminal stopper of the rotaxane. This understanding could have important implications for other areas where chiral transmission from one chemical entity to another underpins a physical or chemical response, such as the seeding of supertwisted nematic liquid crystalline phases or asymmetric synthesis.     

关于为拔尖人才培养开设的"学科前沿"类课程的探讨

With the implementation of the basic discipline of "Top Talent Training Program" (the "East Ever Project"), more and more new reforms and attempts are being made in various universities. In the process of innovation and exploration, a new curriculum is being implemented, that is, the "the frontier aspects of disciplines" course. Through investigation and research, we found that many colleges and universities in China are carrying out or trying to carry out such courses, and the students who participated have different benefits. This paper mainly discusses the current situation of the development of the frontier courses of many universities in China, and gives suggestions based on the two courses of Tang Aoqing Honors Program in Science of chemistry in Jilin University. This paper provides reference for other colleges and universities to open such courses.     

基于现代信息技术的结构化学一维势箱理论和HMO法“翻转课堂”教学设计

In the article, we presented an instructional design of "Particle in One-Dimensional Box Theory" and "HMO Theory" application based on flipped classroom teaching. The students are instructed to use both "Particle in One-Dimensional Box Theory" and "HMO Theory" to solve the electronic structure of olefins and enhance their understanding of quantum mechanics theory via comparison of "Particle in One-Dimensional Box Theory" and "HMO Theory".     

梦萦魂牵--《化学通报》复刊30年

哲学家和物理学家都喜欢研究和讨论“时间” ,时间之矢告诉人们光阴冉冉不复返 ,矢者失也。然而人们却总想回忆 ,寻找那些美好的或沮丧的过去 ,是安慰或自娱吧。我一直相信生活总是向前的 ,社会总是进步的 ,就和宇宙不停地膨胀一样。《化学通报》复刊已经 3 0年了 ,既然是复刊 ,必然先有停刊。历史总是把破坏和重建放在一起考虑的 ,才能找出规律。人们都说 2 0世纪是自然科学大发达的时代 ,然而 2 0世纪又是人类社会灾难最多的时代。正因如此 ,才促使科学多极化地、多样性地发展起来 ,从欧洲到美洲到亚洲 ,一点点 ,慢慢地扩散开来 ,也许 ,真…     

"Handbook of Organic Chemistry"

本书由Dean,J.A.编著,由McGraw—Hill在1987年出版。它以表格形式按英文字母顺序给出了4000种有机化合物及与有机化学相关的无机化合物的名称、结构式、分子量、Beilstein文献、密度、折光指数、熔点、沸点、闪点和溶解度。其中一部分还给出了物理性质(包括粘度、介电常数、偶极矩和表面张力)、     

"Clickable" polymersomes

Polymersomes, composed of amphiphilic polystyrene-block-poly(acrylic acid) (PS-b-PAA), with the periphery being covered with azide groups, were used for further functionalization using "click" chemistry.     

发展“模型认知”素养的教学实践*——以“化学方程式”为例

模型认知是重要的思维方法。基于模型认知进行教学设计,能促使教师从关注知识转向关注核心素养,从而使教学活动有效地促进学生思维能力的发展。在对模型及模型认知理解的基础上,以典型的符号模型“化学方程式”为例,阐明了教学思路和教学活动与学科观念的关系,形成了发展学生模型认知核心素养的教学设计。     

Tuning "kappticity" of tripodal ligands

The synthesis and structural characterization of a series of tripodal tris(phosphine) ligands, containing SiMe2 elbow groups, is described. The significant steric congestion in these ligands, due to the silylmethyl substituents, is manifest both in the solid-state structures and in the solution NMR spectra of the free ligands. Variable temperature 1H{31P} NMR studies of one of the ligands, CH3C(SiMe2PEt2)3 (4b) gave an estimated barrier to rotation around the Si-Capical bonds of approximately 10.4 kcal mol(-1). Octahedral kappa2- and kappa3-molybdenum complexes of these ligands also demonstrate the impact of the additional bulk imparted by the SiMe2 substituents, and the high Lewis basicity of these phosphines, with subtle changes at the apical and phosphine substituents changing the overall coordination chemistry observed.