季铵盐阳离子型双子表面活性剂的合成及其表面活性

以二甲基长链烷基叔胺和1,5-二溴戊烷为起始原料合成了系列不同疏水烷基长度的阳离子型双子表面活性剂m-5-m(m=8, 12, 16).对其表面活性进行了初步研究,结果表明:所合成的系列产物都具有较好的表面活性,其中16-5-16具有最低的临界胶束浓度(CMC 0.289 mmol·L-1);随着疏水烷基链的增长,表面活性剂的CMC显著降低.对应的表面张力(γCMC)则随m的增加先降低,后增高,当疏水链为12个碳时为最低值;8-5-8的表面活性最差.     

新型阳离子表面活性剂的合成及表面活性研究

以α-长链烷基吡啶和烯丙基氯为原料合成了吡啶盐型阳离子表面活性剂———N-烯丙基-2-烷基氯化吡啶嗡盐(GS-n),研究了其表面性能,结果表明,GS具有较好的表面活性,其中N-烯丙基-2-十六烷基氯化吡啶嗡盐(GS-16)具有最低的临界胶团浓度(CMC,0.527 mmol.L-1);随着α-烷基链的增长,GS的CMC显著降低,表面张力(γcm c)则先降后升;GS-12的γcm c为27.1 mN.m-1。     

用聚合表面活性剂作增敏试剂分光光度测定钼和钨

采用表面活性剂的分光光度分析法应用日趋广泛。这方面的研究工作虽极活跃,但较多工作限于已有经典表面活性剂的研究与应用,为分析化学的特定需要设计与合成新型表面活性剂的研究尚少。作者曾用环氧氯丙烷和长链烷基叔胺合成了以聚乙二醇为主链含有若干个带长链烷基的季氮支链的低聚合表面活性剂——聚(氧化丙烯)-α-十八烷基二甲基氯化铵(PPOSA)。实验表明,这类表面活性剂兼有阳离子和非离子表面活性剂的某些特性。本文     

双酯基型Gemini表面活性剂的合成及其性能

以1,4-环己二醇、氯乙酰氯、长链叔胺(RN(CH_3)_2,R=10、12、14、16)为原料,合成了一系列不同长度烷基链的双酯基型Gemini表面活性剂(分别命名为C10-EG-10、C12-EG-C12、C14-EG-C14、C16-EG-C16),用FTIR、NMR(~1H、~(13)C)对中间体及产物进行了表征,并研究了表面活性剂的表面性能及抑菌能力。结果表明:在298.15K时,采用铂金环法测定了合成的4种不同长度烷基链Gemini表面活性剂的临界胶束浓度,C10-EG-C10、C12-EG-C12、C14-EG-C14、C16-EG-C16的CMC值分别为5.495、1.096、0.186、0.045 mmol·L~(-1),与传统单链季铵盐表面活性剂相比,合成的Gemini表面活性剂具有较低的CMC值。胶束化热力学参数结果表明在形成胶束过程中是自发放热的。对合成的4种表面活性剂进行了乳化性能、起泡性能和抑菌测试,C14-EG-C14表面活性剂具有很好的乳化能力;C16-EG-C16 Gemini表面活性剂具有良好的稳泡能力;C10-EG-C10表面活性剂具有良好的抑菌能力。     

系列十二烷基二甲苯基磺酸钠的合成与表面性能

以酰氯、邻二甲苯为原料,经傅-克酰基化反应、格氏反应、还原反应、磺化及中和5步反应,合成了6种结构明确的十二烷基二甲苯基磺酸钠异构体。用FT-IR、ESI-MS和1HNMR测试技术鉴定了中间产物和最终产物的结构。用滴体积法测定表面活性剂水溶液25℃时的表面张力,从而确定其临界胶束浓度,研究了支链结构对其表面性质的影响。6种表面活性剂(化合物Ⅰ～Ⅵ)的临界胶束浓度CMC(mmol/L)和表面张力γCMC(mN/m)分别为:Ⅰ0.25和30.00;Ⅱ0.50和28.21;Ⅲ0.79和28.10;Ⅳ1.00和27.01;Ⅴ2.00和26.41;Ⅵ2.50和26.40。结果表明,随着苯环由边缘移动至长链烷基的中间,表面活性剂的CMC增高,γCMC减小。     

阳离子表面活性剂结构对两相体系长链烯烃氢甲酰化反应的影响

合成了四种季铵盐型阳离子表面活性剂，C16H33N（N2H5）3Br(十六烷基三乙基溴化铵)，C16H33N(CH3)2C12H25Br(十六烷基十二烷基二甲基溴化铵)，C22H45N(CH3)3I(二十二烷基三甲基碘化铵)和C22H45N(CH3)2C16H33Br(二十二烷基十六烷基二甲基溴化铵)，考察其在水-有机两相体系中对Rh-TPPTS催化的长链烯烃氢甲酰化反应的促进作用。结果表明，表面活性剂中疏水长链和阳离子头的变化对催化性能有重要影响，疏水长链的增长和疏水长链数目的增加、小的阳离子头均有利于加快催化反应的速度，而疏水长链对催化活性的影响更为显著。     

基于丙二酰胺的不对称双子表面活性剂的合成及其乳化性能

将二(3-二甲氨基丙基)丙二酰胺分别与溴代十六烷和溴代十四烷反应,生成的季铵盐化产物经丙酮-乙腈重结晶,得到含丙二酰胺基的不对称阳离子双子(Gemini)表面活性剂(命名为16-9-14),总收率为45.9%(以溴代十六烷计);利用红外光谱和核磁共振谱表征了合成产物的结构,采用电导法测定了其临界胶束浓度(CMC),采用滴体积法测定了其临界张力(γCMC),进而初步探讨了其发泡沫性能和乳化性能.结果表明,合成的Gemini表面活性剂的CMC为1.57×10-4 mol/L,γCMC为38.45mN/m;其发泡性能和乳化性能优于相应的单子表面活性剂.     

聚合型表面活性剂用作分析试剂-PPOTA与PPOCA的合成及分析特性

将长链烷基季氮和非高于烷氧链引入同一个分子中,合成了兼有阳离子和非离子表面活性剂特点的低聚合表面活性剂聚氧化丙烯-α-十六烷基二甲基氯化按(PPOCA)和聚氧化丙烯-α-十四烷基二甲基氯化铵(PPOTA)。研究了其基本性质,并试用作光度分析胶束增敏试剂。     

用氯离子电极同时测定阳离子表面活性剂的CMC及反离子缔合度

临界胶束浓度(CMC)是研究表面活性剂的一个重要参数,胶束的反离子缔合度(K)是重要的特性参数。本文以阳离子表面活性剂十烷基三甲基氯化铵(DTMAC)、十二烷基三甲基氯化铵(DTAC)、十四烷基三甲基氯化铵(TTAC)、十六烷基三甲基氯化铵(CTAC)和十八烷基三甲基氯化铵(OTAC)水溶液体系为研究对象,用氯离子选择电极分别测定了其水溶液体系胶束的CMC和K。     

Gemini表面活性剂强化有机铵盐的防膨性能研究

针对低渗透储层粘土矿物水化膨胀、运移以及注水压力高而导致油田采收率大幅度降低的问题,作者以长碳链烷基叔胺和1,3-二溴丙烷为原料合成系列阳离子Gemini表面活性剂(Cn-3-Cn),以乙二胺和甲酸为原料合成了有机铵盐类防膨剂(EMN),并将二者以一定比例复配,通过评价防膨性能、表/界面活性,得出表面活性剂C14-3-...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.