共查询到20条相似文献,搜索用时 125 毫秒
1.
2.
3.
4.
5.
用微观格点模型对质子交换膜燃料电池(PEMFC)定向结构阴极性能进行了模拟,并与随机结构电极进行了对比,研究了催化剂利用率及电池性能的变化.计算了催化层内的传递和电化学反应,研究了质子、氧气及电化学反应速率在电极厚度方向上的分布,并且通过对比氧气浓度、离子电势和电化学反应速率的分布,证明了Pt/C颗粒在电极厚度方向上定向排布有利于提高电池性能.另外,研究了电极厚度对定向结构电极性能的影响,发现与随机结构电极不同,定向结构电极厚度越小,高电流密度下电极性能越好. 相似文献
6.
7.
研究了新型的钠硫电池钠极钠芯结构和硫极预制结构对电池性能影响.实验表明,钠极的钠芯结构不仅能改善电池放电性能,而且有利提高电池的比能量和安全性;内衬氧化铝纤维的硫极预制结构能缓和界面极化,改善电池充电性能.改进电极结构后的钠硫电池也有利于电池向商品化,实用性发展 相似文献
8.
稀土对Keggin结构磷钼酸催化剂结构和性能的影响 总被引:9,自引:0,他引:9
合成了具有Keggin结构的杂多酸催化剂。选用稀土元素La、Ce、Pr对催化剂进行掺杂,考察了添加稀土前后的结构、热性能以及对异丁酸的吸附情况,讨论了稀土的添加对催化剂结构和性能的影响。 相似文献
9.
10.
功能高分子型活性材料结构对钆离子选择电极性能的影响 总被引:1,自引:0,他引:1
本文采用接枝共聚方法合成功能高分子型钆化合物活性材料,研究了它们的结构和某些性能,结果表明这些活性材料的结构和性能对钆离子选择电极性能有较大的影响。 相似文献
11.
Collagen films are widely used as adhesives in medicine and cosmetology. However, its properties require modification. In this work, the influence of salicin on the properties of collagen solution and films was studied. Collagen was extracted from silver carp skin. The rheological properties of collagen solutions with and without salicin were characterized by steady shear tests. Thin collagen films were prepared by solvent evaporation. The structure of films was researched using infrared spectroscopy. The surface properties of films were investigated using Atomic Force Microscopy (AFM). Mechanical properties were measured as well. It was found that the addition of salicin modified the roughness of collagen films and their mechanical and rheological properties. The above-mentioned parameters are very important in potential applications of collagen films containing salicin. 相似文献
12.
13.
14.
Lester Phong Sijing Xiong Say Chye Joachim Loo 《Polymer Degradation and Stability》2010,95(5):771-1803
Radiation has been used as a processing tool to modify the properties of polymers. The aim of this study is to understand how electron beam radiation, together with pentaerythritol tetraacrylate (PTTA) as a tetra-functional monomer, can alter the properties (i.e. thermal and mechanical) and hydrolysis rates of PLGA and PLLA. The effects of radiation dose and PFM concentration on the physical properties of the polymers were investigated. The results showed that upon irradiation PLGA and PLLA cross-linked, and an increased in gel content was observed. Glass transition temperature (Tg) and mechanical properties of the polymers also increased. Cross-linked PLGA and PLLA samples were found to retard hydrolytic degradation. The mechanical properties of these polymers were also unaffected by hydrolysis. In summary, PLGA and PLLA cross-linked with PTTA were found to have enhanced mechanical properties and were able to retard hydrolytic degradation. 相似文献
15.
Xiaolin Wang Qiao Yang Yixue Cao Junhan Zhou Haibin Hao Yuanyuan Liang Prof. Dr. Jingcheng Hao 《化学:亚洲杂志》2016,11(5):722-729
Green and environmentally friendly ionogels formed by a sugar surfactant were prepared in two kinds of imidazolium‐based ionic liquids. The phase transition from ribbon structures to lamellar structures induced by temperature and the transition mechanism were investigated in detail by means of freeze‐fracture TEM and field‐emission SEM observations, as well as small‐angle X‐ray scattering measurements. The rheological properties and tribological properties of two kinds of ionogels were systematically investigated. The difference in the lubricating properties and antiwear capability can be explained well by the mechanical and viscoelastic properties, as well as the different microstructures of samples destroyed by shear forces. This work provides a better understanding of the relationship between the structures, rheological properties, and tribological properties of ionogels. 相似文献
16.
17.
18.
Iida K Inagaki Y Todo H Okamoto H Danjo K Luenberger H 《Chemical & pharmaceutical bulletin》2004,52(8):938-942
The effects of the surface processing of lactose carrier particles on the dry powder inhalation properties of salbutamol sulfate were investigated. Lactose carrier particles were processed using a high-speed elliptical-rotor-type powder mixer (Theta-Composer). In the present study, drug/carrier powder mixtures were prepared, consisting of micronized salbutamol sulfate and coarse lactose carriers with various particle surface conditions prepared by surface processing. These powder mixtures were aerosolized by a Jethaler, and the in vitro inhalation properties of salbutamol sulfate were evaluated with a twin impinger. Compared with those of the powder mixed with unprocessed lactose carriers, the in vitro inhalation properties of the powder mixture prepared using the surface processed lactose carriers were significantly different, showing that the in vitro inhalation properties of salbutamol sulfate were improved. The in vitro inhalation properties increased with the rotor rotation rate. Using this surface processing system would thus be valuable for increasing the inhalation properties of dry powder inhalation with lactose carrier particles. 相似文献
19.
复合载体TiO2-Al2O3的制备及其对Ni-Mo-S负载型催化剂加氢脱氧性能的影响 总被引:1,自引:0,他引:1
采用共沉淀法制备出复合载体TiO2-Al2O3,用N2-吸附、XRD和吡啶吸附红外光谱等手段进行表征。采用原位硫化法制备Ni-Mo-S/TiO2-Al2O3负载型催化剂,以苯酚为模型化合物研究其加氢脱氧催化性能。主要研究铝源和沉淀剂对TiO2-Al2O3复合载体性能的影响以及其作为载体对Ni-Mo-S/TiO2-Al2O3催化苯酚加氢脱氧反应的影响。结果表明,以氯化铝为铝源制备的复合载体具有较大的孔容和孔径,孔容达1.12cm3/g,孔径达18.0nm;以硫酸铝为铝源和以碳酸氢铵为沉淀剂制备的复合载体具有较大的比表面积,高达295m2/g;氨水沉淀制备的复合载体具有较多的L酸;以硫酸铝为铝源制备的复合载体形成少量的B酸。TiO2-Al2O3作为载体影响Ni-Mo-S/TiO2-Al2O3负载型催化剂加氢脱氧性能的主要因素是载体的酸性和载体的比表面积。在300℃,4.0MPa条件下Ni-Mo-S/TiO2-Al2O3催化苯酚的转化率达81.9%,产物中无氧化合物的总选择性达100%,脱氧率达79.4%。 相似文献
20.
研究了具有欠完整立方烷构型的过渡金属原子簇分子的二阶非线性光学性质。利用TDDFT方法计算了选取的簇分子及相应模拟构造分子的静态和动态的一阶非线性光学超级化率(ijk);并计算了不同金属、桥原子和配体以及簇芯对该类化合物一阶超级化率的影响。选取其中的一个簇分子为基本模型,分析了该分子的电子结构和分子轨道,在微观水平上阐述了其非线性光学性质的可能起源。认为由过渡金属和硫原子组成的簇芯和与桥原子相连的配体对该类簇合物的二阶非线性光学性质的起决定性的作用。 相似文献