Sm-Al-MCM-41分子筛的合成与表征

以十六烷基三甲基溴化铵为模板剂, Na2Si3O7为硅源,采用水热合成方法制备了双金属Sm-Al-MCM-41介孔分子筛,并用XRD, FT-IR, SEM, TG-DTA等方法对样品进行表征.结果表明该分子筛具有典型的MCM-41介孔分子筛特征.     

高纯度中孔分子筛MCM-41的合成与表征

用不同pH值的混合物制备了不同孔径的全硅MCM-41和不同金属离子取代的M-MCM-41(M=Al,Mn,Fe和V)分子筛.这些试样均呈现MCM-41的X射线粉末衍射特征峰和Ⅳ型氮气吸附等温线,但混有不同含量的无定形氧化硅.样品中MCM-41晶体的含量与溶胶的pH值和所用表面活性剂的碳链链长有关.骨架硅的金属离子取代降低了MCM-41的有序度,并且(100)面衍射峰强度从Al到V依次减弱.     

介孔分子筛V-MCM-41的水热法制备与合成机理

 以十六烷基三甲基溴化铵为模板剂,廉价的工业级高模数比(3.3)的硅酸钠为硅源,通过水热法合成了V-MCM-41介孔分子筛. 考察了合成条件对产物织构的影响,并采用低温氮吸附法分析探讨了介孔分子筛V-MCM-41的合成机理. 结果表明,模板剂用量、 pH值、加料方式、晶化温度、晶化时间、陈化时间和焙烧气氛等合成条件对介孔分子筛的制备均有影响,其中晶化温度、 pH值和模板剂用量的影响最为明显. X射线衍射谱表明合成的介孔分子筛具有六方晶体结构. 红外光谱和紫外可见光谱表明V进入了介孔分子筛的骨架结构.     

YOx -MCM-41介孔分子筛的合成与表征

以十六烷基三甲基溴化铵为模板剂,偏硅酸钠为硅源,硝酸钇为钇源,用水热法合成了YOx-MCM-41介孔分子筛,经X射线粉末衍射法,FT-IR,热重分析,紫外漫反射法及N2吸附-脱附法表征。结果表明,该分子筛具有热稳定性好、比表面积大、孔道均一等典型的MCM-41介孔分子筛的特征。     

微介孔复合分子筛合成及其在汽车冷启动尾气控制中的应用

分别采用稀溶液和浓溶液双模板剂两步水热合成法,以二氧化硅微硅粉和铝酸钠为硅源和铝源,第一步获得β分子筛晶种,第二步以β分子筛晶种为结构单元组装形成兼具MCM-41分子筛和β分子筛结构特点的复合型分子筛β/M(其中β是指β分子筛,M是指MCM-41介孔分子筛).采用X射线衍射(XRD)、傅里叶变换红外(FT-IR)光谱、氮气吸附(BET)和高分辨透射电镜(HRTEM)对样品的物相结构和微观形貌进行了表征,并对复合分子筛的合成过程进行了分析.结果表明:复合分子筛β/M的形成是微孔β结构和介孔MCM-41结构的竞争生长过程,β分子筛晶种的晶化时间和晶粒度大小对β/M复合分子筛的结构有重要影响.此外,我们以甲苯为探针分子,比较研究了三类分子筛β/M、MCM-41和β的原样以及经高温水热处理后样品的吸附性能,结果表明:β/M复合分子筛的热稳定性优于介孔分子筛MCM-41,其甲苯吸附容量比MCM-41和β分子筛的高,其中以浓溶液法合成的复合分子筛吸附容量最高.     

水玻璃为原料在开放体系中快速合成介孔材料MCM-41

自从 M41 S系列硅基介孔分子筛被人工合成以来[1,2 ] ,有关分子筛的合成、性能、形成机理、结构和应用等方面的研究报道不断出现[3～ 5] .目前 ,由有机 -无机离子经分子水平的自组装结合而产生介孔材料的合成机理主要归结于在合成过程中表面活性剂的模板效应 ,如液晶模板机理[1,2 ] 、棒状自组装模型[6 ] 、电荷匹配机理[7] 、层状折皱模型[8] 和使用非离子表面活性剂合成介孔材料等效应[9] .本文以水玻璃作为硅源 ,以十六烷基三甲基溴化铵 (CTAB)阳离子表面活性剂为模板剂 ,在温和条件下 ,采用开放体系合成出具有 MCM-4 1结构特点的介…     

混合表面活性剂模板法合成立方相介孔含钛氧化硅

自1992年Ｍｏｂｉｌ公司的Ｍ41Ｓ系列介孔氧化硅分子筛问世以来[1,2],借助表面活性剂液晶模板方法合成各种孔结构与不同大小孔径的硅基分子筛材料引起了人们的极大兴趣,目前多数工作仍然集中于六方相的介孔分子筛.具有双连续的三维交织立方排列孔道结构的ＭＣＭ48由于其孔道不易堵塞和良好的骨架结构稳定性[3,4],在催化、吸附和与其为载体的制备等方面具有独特的应用价值.但由于液晶模板形成立方相区的范围非常狭窄,相应的分子堆积比对模板剂分子几何结构要求较苛刻,采用单一表面活性剂为模板剂合成时,条件难以掌握,制备ＭＣＭ48十分困难.Ｈ…     

负载Co介孔分子筛催化热解乙醇制备纳米碳管

以硅酸钠为原料,CTAB为模板剂,水热法合成MCM-41介孔分子筛,采用浸渍法制备负载钴的介孔分子筛(Co/MCM-41),并将其作为催化剂,CVD法热解无水乙醇制备CNTs.利用XRD、TEM、比表面积和孔径分布测定和Raman光谱等方法对所合成的介孔分子筛和纳米碳管进行了表征.结果表明:所制备的Co/MCM-41样品具有典型的MCM-41的介孔结构;当热解反应温度为750℃下所制备出的纳米碳管的品质最好.     

介孔分子筛HMS-Al、HMS-Et的制备与表征

HMS[1]是六方结构的介孔二氧化硅分子筛,由中性表面活性剂和中性无机物通过氢键自组装途径合成,具有较大的比表面积和较大的孔容,孔径大小均一。相对于介孔分子筛MCM-41[2]来说,HMS具有较厚的骨架内壁和较丰富的表面羟基,在制备过程中所用模板剂(十六胺)可通过乙醇萃取的方法脱     

苯及苯磺酸基官能化的中孔分子筛的合成及催化应用

近年来 ,通过对介孔分子筛 (如 MCM,HMS,MSU-X)结构及组成的化学“裁剪”,制备具有特定结构和表面性质的催化材料成为该领域的研究热点之一 [1～ 5] .许多文献报道了 MCM-4 1的有机官能化中孔材料的制备技术 [5～ 8] ,并将其应用于有机合成反应 ,取得了较好的结果 [7,8] .其中 MSU-X介孔分子筛结构具有三维排列“Worm-like”孔道特征 ,有利于物料传输 ;相对于 MCM-4 1分子筛在合成方面具有以中性表面活性剂作模板剂且模板剂容易去除等诸多优点[9] .本文采用非离子表面活性剂 C11— 15H2 3— 31(CH2 CH2 O) 9H(AEO9)为模板剂 ,…     

Synthesis, characterization, and catalytic properties of stable mesoporous molecular sieve MCM-41 prepared from zeolite mordenite

Mesoporous molecular sieves (denoted as M-MCM-41) with ordered hexagonal structure have been successfully synthesized from the assembly of precursors from preformed zeolite Mordenite with CTAB surfactant micelle in alkaline media. The samples were characterized by XRD, N₂ adsorption, IR and DTG. The materials exhibit highly hydrothermal stability, as compared with conventional MCM-41. Characterization results indicate that the mesoporous walls of M-MCM-41 contain the secondary building units similar to those in microporous crystal of zeolite Mordenite. In catalytic dealkylation of C10⁺ aromatic hydrocarbon, M-MCM-41 shows higher activities in comparison with Mordenite and MCM-41, which would be ascribed to the combination of advantages of both MCM-41 (large pores) and Mordenite (strong acidity). Furthermore, this synthesis strategy could be used as a new general method for the preparation of hydrothermally stable mesoporous aluminosilicate materials under alkaline conditions.     

以微孔沸石MCM-49和MCM-56为硅铝源合成强酸性介孔分子筛

以相同硅铝比的微孔沸石MCM-49 和MCM-56为硅铝源, 通过碱处理和十六烷基三甲基溴化铵模板剂, 合成了具有较强酸性的六方结构介孔分子筛材料MM-49和MM-56, 并采用XRD、红外光谱、氮气吸附-脱附等方法对其进行了结构表征, 采用NH3-TPD和IR-吡啶吸附方法对其进行了酸性表征. 实验结果表明, MM-56和MM-49具有明显强于常规介孔分子筛酸性的特点, 在苯酚与叔丁醇的烷基化反应中表现了良好的催化性质.     

A novel method for synthesis of mesoporous ZSM-5 from iron ore tailings

Mesoporous ZSM-5 was prepared from iron ore tailings (IOT) using a two-step process. Mesoporous MCM-41 was first synthesized using cetyltrimethylammonium bromide (CTAB) as mesoporous template and IOT as silica source. The CTAB in the as-synthesized MCM-41 was used as the mesoporogen to produce the mesoporous ZSM-5, by recrystallizing the amorphous walls of MCM-41 with tetrapropylammonium bromide (TPABr) as the structure-directing agent via solid-phase conversion. To evaluate the textural properties of mesoporous ZSM-5, the as-synthesized samples were characterized using x-ray diffraction, scanning electron microscopy, transmission electron microscopy, ²⁹Si, ²⁷Al magic angle spinning nuclear magnetic resonance spectroscopy, and nitrogen adsorption. The results show that phase separation between the surfactant and zeolite crystals was avoided in the solid-phase conversion process, which transforms the as-synthesized MCM-41 to mesoporous zeolite. Therefore, the synthetic route presented herein provides a novel method for the synthesis of mesoporous ZSM-5 from IOT.

     

模板剂对全硅MCM-41介孔分子筛结构的影响

分别采用十六烷基三甲基溴化铵和十六烷基三乙基溴化铵作为模板剂,硅溶胶为硅源,用水热晶化法在碱性（NaOH）介质中合成了MCM-41介孔分子筛样品.通过XRD、N2吸附-脱附、TG-DTA、IR等测试手段对这两种样品进行了对比表征分析.考察了两种不同模板剂对其晶体结构、比表面及孔径大小的影响.实验结果表明,相对于十六烷基三甲基溴化铵做模板剂,采用大头基的十六烷基三乙基溴化铵可以合成较大孔径和孔容（分别为4.72 nm和1.14 cm3•g-1）的MCM-41介孔分子筛,而且具有较窄的孔径分布,因此对于合成大孔径的介孔分子筛MCM-41,十六烷基三乙基溴化铵是一种很好的模板剂.     

A Novel Method for the Synthesis of Mesoporous Molecular Sieve MCM-41

Using glycerol, glycol and water as solvent, cetyltrimethylammonium bromide (CTAB) as template, tetraethyl orthosilicate (TEOS) as silica source, ethylenediamine (EDA) as base source, mesoporous molecular sieve MCM-41 has been synthesized at room temperature, characterized by X-ray power diffraction and N2 adsorption. Compared with the samples synthesized by glycol and water, the samples synthesized by glycerol have larger pore diameter and high surface areas. Thus glycerol is an efficient solvent for preparing larger pore mesoporous MCM-41.     

Thermogravimetry applied to characterization of fly ash-based MCM-41 mesoporous materials

The thermogravimetry (TG) was used for characterization of the fly ash (FA)-based MCM-41 mesoporous materials. MCM-41 mesoporous materials were synthesized using silica extracts from different FA. The synthesis of MCM-41 from FA was carried out by the hydrothermal method using the supernatants of coal FA (in the form of sodium silicate) and cationic cetyltrimethylammonium bromide (CTAB) surfactants as the structure-directing agents. On the basis of the data obtained from the TG analysis, thermal behaviour of FA-based MCM-41 mesoporous materials was assessed. This study has established the range of temperatures corresponding to the desorption of water, decomposition of the surfactant and condensation of silanol, thereby making the overall quality assessment of FA-based MCM-41 mesoporous materials.     

Mesoporous aluminosilicates with ordered hexagonal structure, strong acidity, and extraordinary hydrothermal stability at high temperatures.

Highly ordered hexagonal mesoporous aluminosilicates (MAS-5) with uniform pore sizes have been successfully synthesized from assembly of preformed aluminosilcate precursors with cetyltrimethylammonium bromide (CTAB) surfactant. The aluminosilicate precursors were obtained by heating, at 100--140 degrees C for 2--10 h, aluminasilica gels at the Al(2)O(3)/SiO(2)/TEAOH/H(2)O molar ratios of 1.0/7.0--350/10.0--33.0/500--2000. Mesoporous MAS-5 shows extraordinary stability both in boiling water (over 300 h) and in steam (800 degrees C for 2 h). Temperature-programmed desorption of ammonia shows that the acidic strength of MAS-5 is much higher than that of MCM-41 and is comparable to that of microporous Beta zeolite. In catalytic cracking of 1,3,5-triisopropylbenzene and alkylation of isobutane with butene, MAS-5 exhibits greater catalytic activity and selectivity, as compared with MCM-41 and HZSM-5. The MAS-5 samples were characterized with infrared, UV--Raman, and NMR spectroscopy and numerous other techniques. The results suggest that MAS-5 consists of both mesopores and micropores and that the pore walls of MAS-5 contain primary and secondary structural building units, similar to those of microporous zeolites. Such unique structural features might be responsible for the observed strong acidity and high thermal stability of the mesoporous aluminosilicates with well-ordered hexagonal symmetry.     

辅助有机胺对介孔分子筛MCM-41合成及其性质的影响

采用阳离子表面活性剂十六烷基三甲基溴化铵为模板剂、硫酸铝为铝源、硅溶胶为硅源，分别使用中等链长的有机胺和正己烷作为辅助添加剂，用水热晶化法在碱性介质中合成了介孔分子筛MCM-41，通过XRD、N2吸附-脱附、SEM测试手段对得到的样品进行了对比表征分析。实验结果表明，除三乙胺外，向反应体系中加入适量的三正丙胺、三正丁基胺、三正辛胺和二异丁胺后，均能够使介孔 MCM-41的d100值和孔径增大，且具有较大的BET表面积（>1 000 m2/g）和孔容（>1 cm3/g）；加入正己烷后，也可以使得MCM-41孔径变大，但是和加入有机胺相比较，合成的样品具有较小的BET表面积（887.3 m2/g）和孔容（0.81 cm3/g）。     

丝光沸石前驱体组装MCM-41介孔分子筛

MCM-41分子筛是具有单一孔径的长程有序介孔材料,由于孔壁是无定形结构,与微孔沸石晶体相比,水热稳定性较差,这使其在石油炼制和精细化工中的应用受到很大的限制.根据实验发现,如果将一些沸石的前驱结构单元体--即在形成完整的沸石结构前所形成的初级或次级结构单元引入介孔材料,使其转化为介孔孔壁,将会增加介孔材料的短程有序化程度,提高水热稳定性.     

One pot synthesis of ordered mesoporous organosilica particles bearing propyl-, octyl- and hexadecyl-chains

New hybrid organic–inorganic materials exhibiting ordered mesoporous structures have been synthesized by co-condensation of tetraethoxysilane and various alkyltrimethoxysilanes with increasing length of the hydrocarbon chain (propyl, octyl, hexadecyl), in water–ethanol solution containing ammonia, in the presence of a cationic surfactant (cetyltrimethylammonium bromide) as templating agent. The obtained hybrid materials were characterized by using several physico-chemical techniques, such as X-ray diffraction, N₂ adsorption, ²⁹Si MAS NMR, SEM and elemental analysis. It was shown that the direct synthesis procedure allows obtaining ordered hybrid mesoporous silica with various contents of organic functions, from 5 to 20 %. Moreover, increasing the chain length of the organic group, from propyl to octyl and hexadecyl leads to a change of the pore structure from hexagonal p6mm MCM-41 type architecture to cubic Ia3d MCM-48 type mesostructure.