聚合物包覆二氧化锆液相色谱固定相的制备与评价

在溶液体系中通过自由基引发长链碳烯-1、二乙烯苯和乙烯基二氧化锆交联聚合反应得到聚长链碳烯-苯乙烯包覆二氧化锆固定相.考察了这种交联聚合物包覆柱填料的色谱性能和化学稳定性,并用这种填料分离了稠环芳烃和碱性化合物.     

二氧化锆微球表面键合磺化交联聚苯乙烯固相萃取填料的制备及应用

以聚合诱导胶体凝聚法(PICA)制备二氧化锆微球,用钛酸酯偶联剂对其进行表面改性,使其接枝上碳碳双键基团。在溶液体系中,该双键与单体苯乙烯和二乙烯苯在自由基引发下交联聚合,形成的聚合物包覆在二氧化锆微球表面。再通过磺化方法将磺酸基离子连接到苯环上,得到阳离子交换固相萃取填料。通过红外光谱、扫描电镜/X射线能谱等手段对其进行了表征。将装填得到的固相萃取柱与高效液相色谱联用,测定了水中的甲基磺草酮、阿特拉津和乙草胺。3种化合物的色谱峰面积与质量浓度呈良好的线性关系,相关系数(r²)均大于0.99;甲基磺草酮、阿特拉津和乙草胺的检出限分别为5.41、6.72和13.4 μg/L。结果表明,制得的聚合物包覆二氧化锆微球的粒径为6~8 μm,用该填料制成的固相萃取小柱对3种目标物的吸附率高。     

八碳烯和十八碳烯与二乙烯基苯交联聚合包覆二氧化钛固定相的合成及反相色谱性能的评价

分别合成了八碳烯-1以及十八碳烯-1与二乙烯基苯交联聚合包覆二氧化钛固定相,对它们进行了元素分析和漫反射红外光潜的表征,并用这两种填料分离了稠环芳烃、烷基苯、苯胺类碱性化合物、卤代苯.实验证明这种交联聚合包覆崮定相对有机流动相和碱具有高稳定性.最后将两种固定相用于合成药中辛伐他汀和洛伐他汀的分离检测.     

新型混合固定相的制备与性能评价

通过共聚交联方法将长链碳烯-苯乙烯包覆到锆胶表面上, 得到聚合物包覆固定相, 再对该填料进行磺化引入离子官能团到聚合物表面, 得到混合型固定相. 用扫描电镜和红外光谱对这些填料进行了表征, 考察了混合型固定相的毛细管电色谱性能, 并用该填料分离了苯甲酸和苯胺等化合物.     

包覆聚合物高效液相色谱柱填料的研究进展

评述了用于高效液相色谱的包覆聚合物填料的研究进展．该类填料以无机载体为基质，包覆以多种有机聚合物层．这些新型填料既保留了有机聚合物和无机基质的优点，又克服了它们各自的缺陷．包覆的聚合物类型包括聚烃、聚醚、聚酰胺、多糖、多肽、聚硅氧烷、聚胺及多核苷酸等，无机基质包括硅胶、铝胶、钛胶、钻胶及多孔石墨化碳等．包覆聚合物固定相可用于几乎所有色谱方式，如反相高效液相色谱、高效离子交换色谱、手性固定相、超临界流体色谱、体积－排阻色谱，以及亲合色谱．     

二乙烯苯-苯乙烯交联聚合物包覆毛细管硅胶整体柱的制备与评价

在优化条件下制备了一类新型的无机-有机复合型毛细管整体柱.即通过在硅胶毛细管整体柱柱床上包覆纳米级聚合物薄膜得到了二乙烯基苯-苯乙烯交联聚合包覆的硅胶整体柱,突破了有机聚合物和无机硅胶整体柱的界限,使之兼具无机、有机两种基质的优点,从而拓展了硅胶整体柱的应用范围.考察了这种交联聚合物包覆的硅胶毛细管整体柱的结构特征和μ-HPLC性能,并成功分离了稠环芳烃类系列小分子化合物,其对于萘的柱效可达28 000 N/m.     

碳十八键合锆胶固定相的制备与色谱性能评价

用诱导聚合胶体凝聚法（PICA）制得的二氧化锆微球与碳十八三乙氧基硅烷反应制备了碳十八键合锆胶固定相（ODZ），评价了该柱填料的色谱性能，并用此固定相分离了中性和碱性化合物。     

长链碳烯-聚丁二烯涂覆二氧化锆固定相的制备及评价

通过在聚合诱导胶体凝聚法制备的二氧化锆微球表面上沉积、交联长链碳烯和聚丁二烯,制备了复合型二氧化锆固定相.探索了影响反应的主要因素,并对其色谱性能进行了评价.用分离实例说明该固定相对中性,特别是碱性化合物具有优良分离性能,显示反相色谱特征.     

表面亲水性粒度单分散交联PMMA树脂的合成及表征

用种子溶胀聚合方法 ,合成出了粒度单分散的交联聚甲基丙烯酸甲酯微球 .将微球通过水解 ,使其转化为表面带羧基的树脂 .分别用多糖化合物Dextran和DEAE Dextran对水解树脂表面进行包覆涂层 ,然后用n 丁二醇双环氧丙醚分别进行交联 ,制备出两种表面带高交联多糖覆盖层的树脂 .以两种改性树脂为填料 ,以人血清蛋白为试样 ,用HPLC方法对树脂的亲水性能进行了表征 .研究表明 ,两种改性树脂均有很好的亲水性 ,蛋白质的回收率分别在 97%和 99%以上 ,并有良好的机械强度和化学稳定性     

PICA法制备用于高效液相色谱的锆胶基质柱填料

迄今 ,硅胶基质固定相在 HPLC领域仍占据主导地位 ,但由于它的 p H使用范围窄 ,尤其在碱性条件下基质逐渐溶解 ,其使用受到限制 [1] .为此 ,寻找稳定性能高的新基质成为当前色谱学研究的热点之一 ,二氧化锆因具有良好化学稳定性和机械强度而受到关注 .目前 ,制备微米级、球形和多孔二氧化锆基质柱填料的常用方法有两种 :(1 )油乳化法 (OEM) ;(2 )聚合诱导胶体凝聚法 (PICA) .OEM法操作简单 ,但制备的二氧化锆微球粒径分布宽且孔径较小 .Carr[2 ,3] ,Unger[4 ] ,Rassi[5,6 ]和 Kawahara等[7,8] 在用 OEM法制备二氧化锆微球方面做了…     

Reversed-phase liquid chromatography of proteins and peptides using multimodal copolymer-encapsulated silica

Multimodal copolymer-encapsulated particles for liquid chromatography were prepared by bonding 1-octadecene and unsaturated carboxylic acids on silica particles (5 microm diameter, 300 A pores) for liquid chromatography of proteins. These multimodal copolymer-encapsulated particles can provide both hydrophobic and hydrogen bonding interactions with polar compounds. The chromatographic performance of these multimodal copolymer-encapsulated particles for peptide and protein separations was evaluated under reversed-phase conditions. Compared with typical C8-bonded silica, polymer-encapsulated particles were more stable in acidic mobile phases and provided better recoveries, especially for large proteins (Mr>0.5 x 10(6)). Totally hydrophobic polymer-encapsulated particles were found to produce broad peaks for proteins, and significant improvements were observed by introducing hydrophilic groups (-COOH) onto the polymer-encapsulated surface to form a multimodal phase. For the reversed-phase liquid chromatography of peptides and proteins, improved selectivity and increased solute retention were found using the multimodal polymer-encapsulated particles. More peaks were resolved for the separation of complex peptide mixtures such as protein digests using the multimodal polymer-encapsulated particles as compared to totally hydrophobic polymer-encapsulated particles.     

In-vitro hemolytic activity and free radical scavenging by sol-gel synthesized Fe3O4 stabilized ZrO2 nanoparticles

Zirconia ceramics have attained much consideration owing to the amazing mechanical strength and white color. These properties provide an opportunity for the use in biomedical applications. In the present study, an application oriented sol-gel route was adapted for synthesis of zirconia nanoparticles. ZrOCl₂·8H₂O was used as a precursor, iron oxide (Fe₃O₄) nanoparticles (pH 2 & pH 9) as a stabilizer and de-ionized water was used as a solvent. Sol-gel synthesized iron oxide stabilized zirconia nanoparticles were prepared by varying concentrations of iron oxide nanoparticles in the range of 2–10 wt%. X-ray diffraction results showed mixed phases at all wt% with acidic pH value, while pure tetragonal phase of zirconia was observed for stabilization with 6 wt% basic iron oxide. Maximum value of dielectric constant (~80 at log f = 4) and minimum value of tangent loss (~0.66 at log f = 4) were observed for zirconia stabilized with basic 6 wt% iron oxide. Maximum value of hardness (1410 ± 10 HV) along with high fracture toughness were observed with optimized stabilization. Very weak hemolytic activity and maximum scavenging (~76) antioxidant activity was observed under optimized conditions. Thus, it can be suggested that optimized nanoparticles, i.e. tetragonal zirconia stabilized with 6 wt% of basic Fe₃O₄, can be further useful for therapeutical and pharmaceutical applications.     

A comparative study of the surface structure, acidity, and catalytic performance of tungstated zirconia prepared from crystalline zirconia or amorphous zirconium oxyhydroxide

Tungstated zirconias prepared from W deposition on zirconium oxyhydroxide are reportedly active for alkane isomerization, whereas solids synthesized by impregnation of zirconia are inactive. The origin of the differences between the two preparations is not fully understood. The present paper examines the influence of W surface density and the nature of the support on the surface structure, development of the acidity, and catalytic performance of WO(x)()/ ZrO(2) catalysts. Two series of catalysts containing W surface densities up to 5.2 at. W/nm(2) were prepared by pore volume impregnation of two different supports: zirconium oxyhydroxide and predominantly tetragonal zirconia (65% tetragonal, 35% monoclinic). The texture and structure of the catalysts were investigated by BET measurements, X-ray diffraction, Raman and infrared spectroscopy. The catalytic activity was tested for 2-propanol dehydration and n-hexane isomerization. For catalysts obtained by impregnation of Zr oxyhydroxide, Raman results showed that W was present as a surface phase. Infrared spectra indicated an increase in the degree of polymerization of W species with increasing W surface density. The development of the acidity was monitored by lutidine adsorption and desorption at 523 K, followed by infrared spectroscopy. The results indicated the presence of a threshold of W surface density at 1.3 at. W/ nm(2) for the detection of these acid sites, followed by a progressive increase in their abundance with increasing W surface density. The development of Br?nsted acidity correlated with the evolution of the infrared bands attributed to "extensively" polymerized W species. A direct relationship was observed between the abundance of Br?nsted acid sites and the catalytic activity for 2-propanol dehydration. For n-hexane isomerization, compared to 2-propanol dehydration, a higher threshold of W surface densities (3.4 at. W/ nm(2)) for the development of activity was observed. The difference was attributed to stronger Br?nsted acid sites required for n-hexane isomerization. The catalysts prepared by impregnation of zirconia exhibited comparable behavior. For a given W surface density, the crystalline composition of the support (tetragonal/monoclinic zirconia), the W surface structure, abundance of Br?nsted acid sites, and catalytic performance were similar. Thus, in an apparent variance with some of the results reported in the literature with respect to the influence of preparation methods, no significant effect of the initial form of the support (Zr oxyhydroxide versus predominantly tetragonal zirconia) was evidenced.     

脉冲微波辅助化学还原合成Pt/C 催化剂及其电催化氧还原性能

采用脉冲微波辅助化学还原法制备了质子交换膜燃料电池(PEMFC)用Pt/C 催化剂. 通过透射电镜(TEM)和X射线衍射(XRD)等分析技术对催化剂的微观结构和形貌进行了表征, 并利用循环伏安(CV)、线性扫描(LSV)和恒电位测量等方法评价了催化剂催化氧还原性能. 在此基础上制备了膜电极(MEA)并组装成单电池, 考察了制备的Pt/C 催化剂作为阴极催化剂材料的电催化性能. 结果表明, 脉冲微波辅助化学还原法是一种制备PEMFC催化剂的有效方法, 溶液pH值和微波功率对Pt 颗粒直径和分散有重要影响. TEM和XRD结果显示, 当溶液pH值为10 且微波功率为2 kW时, Pt 纳米粒子较均匀地分散在碳载体上, 粒径分布在1.3-2.4 nm之间, 平均粒径为1.8 nm. CV、LSV和恒电位测试结果表明, 该催化剂电化学比表面积(ESA)为55.6 m²·g^-1, 具有良好的催化氧还原反应活性和稳定性. 单电池测试结果表明, 在溶液pH值为10条件下, 微波功率为2 kW时制备的催化剂作阴极催化剂时, 单电池最高功率密度为2.26 W·cm^-2·mg^-1, 高于微波功率为1 kW时的最高功率密度(2.15 W·cm^-2·mg^-1)和Johnson Matthey催化剂的最高功率密度(1.89 W·cm^-2·mg^-1).     

碳纤维微电极研究 ⅩⅩ.甲苯胺盐在碳纤维微盘电极上的电化学性质

研究了甲苯胺盐在碳纤维微盘电极上的电化学行为,探讨了pH 对甲苯胺盐电极反应过程的影响,确定在pH<3.7,3.75.5时,参与电极过程的H^+数分别为3,2和1,测定了甲苯胺盐的扩散系数及在碳纤维微盘电极上的电荷转移系数α,标准电子转移速率常数k^α和式量电位E^α,提出了不同pH下电极反应的机制.对甲苯胺盐在碳纤维微盘电极上的吸附性能进行了探索, 并测定了吸附控制条件下的动力学参数     

活性自由基聚合(Iniferter)法制备聚合物包覆硅胶固定相及其色谱性能评价

应用活性自由基聚合法, 在接枝iniferter的硅球表面键合甲基丙烯酸异辛酯-co-乙二醇二甲基丙烯酸酯聚合层, 制备了聚合物包覆硅胶色谱固定相, 并研究了合成条件对于聚合层及分离效果的影响. 在一定聚合时间中, 接枝聚合物质量与反应时间呈线性关系, 并可以在得到聚合物包覆硅胶的基础上, 利用包覆硅胶中的iniferter再次引发接枝聚合, 体现了活性自由基聚合的特点. 聚合物包覆硅胶对于烷基苯同系物、碱性化合物及羟基苯甲酸酯具有很好的色谱分离能力及柱效, 同时, 由于聚合层能够有效地覆盖硅球表面的硅羟基, 减小了碱性化合物的拖尾. 研究工作提供了新的聚合物包覆硅胶固定相的合成方法.     

Thermal Decomposition and Crystallization of Aqueous Sol-Gel Derived Zirconium Acetate Gels: Effects of the Precursor Solution pH

Crystalline zirconia has previously been formed by desiccation and pyrolysis of a pH 3.4 zirconium acetate precursor solution. In this study, amorphous gels were formed by desiccation of zirconium acetate precursor solutions at pH 0.9 to 3.4 obtained by adding hydrochloric acid and at pH 8.0 by adding ammonium hydroxide to the available pH 3.4 precursor solution. The concentrations of the uncomplexed zirconium ion and the 1 : 1 and 1 : 2 zirconium acetate complexes varied with pH. Decomposition of the amorphous gel and its structure evolution to form crystalline zirconia by pyrolysis were studied. Several decomposition and structure transition temperatures occurring in the pyrolysis and the polymorph distribution in the pyrolysis products were dependent on the pH of the precursor solution. These variations of structure evolution with pH were also related to the relative concentrations of specific zirconium complexes in the precursor solutions. Removal of carbon by pyrolysis was improved by adding hydrochloric acid or ammonium hydroxide to the pH 3.4 precursor solution.     

制备条件对Ni/ZrO2-SiO2催化剂煤气甲烷化的影响

采用浸渍法制备了ZrO₂-SiO₂复合载体和Ni质量分数为6%的Ni/ZrO₂-SiO₂催化剂,考察了载体制备时浸渍溶液pH值、焙烧温度和催化剂制备时的焙烧温度对Ni/ZrO₂-SiO₂催化剂煤气甲烷化反应性能的影响。采用X射线衍射、程序升温还原和扫描电子显微镜等方法对催化剂进行了表征。结果表明,载体浸渍溶液pH值为8.0～9.0, 载体焙烧温度为550 ℃,催化剂焙烧温度为450 ℃时,Ni/ZrO₂-SiO₂催化剂在煤气甲烷化反应中显示了最优的催化性能,CO转化率100%,CO₂转化率1.8%,CH₄生成速率16.6 mmol/(h·g)。进一步表征发现,制备ZrO₂-SiO₂复合载体时,增大浸渍溶液的pH值有利于形成粒径较小的亚稳态四方晶相ZrO₂,可见四方晶相ZrO₂更有利于甲烷化反应;载体焙烧温度会影响到NiO粒径的大小和其在催化剂表面的分散,温度过高和过低都会导致NiO粒径大小的不适宜以及分散性的降低;催化剂焙烧温度过高则会导致NiO与载体间的相互作用减弱,NiO分散性降低。