含噻二唑官能基的对叔丁基硫桥杯[4]芳烃衍生物的合成及结构

以对叔丁基硫桥杯[4]芳烃(1)为原料, 在碳酸钾存在下与碘甲烷反应, 生成1,3-二取代桥杯[4]芳烃(2), 其分别与1,2-二溴乙烷, 1,3-二溴丙烷在碳酸钾的存在下进行烷基化反应, 生成硫桥杯[4]芳烃衍生物3和4. 在氢氧化钠存在下,其与过量的含不同官能团的2-巯基-1,3,4-噻二唑反应, 生成下缘含1,3,4-噻二唑基的硫桥杯[4]芳烃衍生物5a, 5b, 6a和6b, 并通过了¹H NMR, ¹³C NMR, IR, MS和元素分析的确证. 同时, X射线分析确定了硫桥杯[4]芳烃3和5a的晶体结构.     

Synthesis and structure characterization of a novel series of N-alkylphthalimidylaminocarbonylmethoxylcalix [4] arenes

A novel series of N-alkylphthalimidylaminocarbonylmethoxylcalix[4]arenes with the reaction between 4-(N-bromoacetyla- mino)-phthalimide derivatives and calix[4]arene has been synthesized and structurally characterized by IR,~1HNMR and MS.From their analysis data,it was found that compounds 7a-7d adopted a cone conformation.     

(硫杂)杯[4]芳烃缩氨基(硫)脲(桥联)衍生物的合成

对叔丁基(硫杂)杯[4]芳烃-1,3-二醛基衍生物4a和4b与苯基氨基硫脲进行“1＋2”缩合反应, 合成了杯[4]芳烃缩氨基硫脲衍生物5a和5b, 产率为84%和85%. 化合物4a和4b与1,6-己基双氨基脲发生“1＋1”缩合反应, 合成了杯[4]芳烃双缩氨基脲桥联衍生物6a和6b, 产率为83%和80%. 新化合物的结构与构象经元素分析、质谱、核磁共振谱等表征证实.     

Direct conversion of macrocyclic furans into macrocyclic isothiazoles

The first calixhetarenes with more than one heteroatom in the constituent rings are prepared in one step by treatment of calix[4]furan 1a and calix[6]furan 1b with ethyl carbamate, thionyl chloride and pyridine to give 2, 3, 4 and 5, 6, 7 respectively; these products have been characterised by X-ray crystallography which reveals that in 2 all eight heteroatoms lie on one face of the macrocyle.     

杯[4]间苯二酚芳烃Schiff碱衍生物的合成及其离子萃取性能

通过控制条件,使两种乙氧基羰基甲氧基杯[4]间苯二酚芳烃2a和2b的酯基与1,6-己二胺的一个氨基反应形成酰胺3a和3b,剩余的一个氨基再与水杨醛反应,得到了相应的杯芳烃Schiff碱衍生物4a和4b,对其进行了金属离子的液-液萃取性能研究.结果表明,Schiff碱基团的引入能大大增强杯芳烃与金属离子的配位能力,而杯芳烃空腔的存在又能提高Schiff碱与金属离子的配位选择性.     

Synthesis of cone, partial-cone, and 1,3-alternate 25, 27-Bis

The preparation of 25,27-bis[1-(2-ethyl)hexyl]- and 25, 27-bis[1-(2-tert-butoxy)ethyl]calix[4]arene-crown-6 combining one polyether crown-6 and one alkylchain O-attached on each side of a calix[4]arene in the cone, partial-cone, and 1,3-alternate conformations are reported. The control over 25, 27-bisalkylcalix[4]arene-crown-6 conformation via varying specific reaction conditions was studied. The series of calix[4]arenes have been prepared by two routes, which differ in the order in which the alkyl or polyether groups were introduced. Moreover, methods have been developed to selectively prepare the cone and partial-cone conformers by using an appropriate base in the alkylation reactions. The conformations of these new derivatives have been probed by (1)H NMR analysis and X-ray crystallography. The (1)H and (13)C NMR spectra of 25,27-bis[1-(2-ethyl)hexyl]calix[4]arene-crown-6, 1, 3-alternate 1, cone 2, and partial-cone 3 are also discussed.     

Missing-link macrocycles: hybrid heterocalixarene analogues formed from several different building blocks

The synthesis and structural characterization of hybrid heterocalix[4]arene analogues containing pyrrole, benzene, methoxy-substituted benzene, and pyridine subunits is described. Macrocycles 1 and 2, examples of calix[2]benzene[2]pyrrole and calix[1]benzene[3]pyrrole systems, respectively, are synthesized by the condensation of pyrrole and an appropriate phenylbis(carbinol). Macrocycles 3 and 7, examples of calix[2]benzene[1]pyridine[1]pyrrole and calix[1]pyridine[3]pyrrole, respectively, are synthesized by the use of a carbene-based pyrrole-to-pyridine ring-expansion procedure. Single-crystal X-ray analysis reveals that compounds 1a, 1b, and 2b adopt 1,3-alternate conformations in the solid state, whereas compounds 3 and 7 display structures that are best described as "flattened partial cones" in terms of their conformation. (Series a refers to pure benzene-derived systems, whereas series b indicates macrocycles containing 5-methoxyphenyl subunits). In the solid state, the methoxy-functionalized macrocycles 1b and 2b, and the chloropyridine-containing macrocycle 7 exist as dimers. In the case of 1a and 7, these compounds interact with neutral solvent in the solid state. The conformations of the macrocycles in solution were explored by temperature-dependent proton NMR and NOESY spectral analysis. At 188 K, macrocycles 1a and 2a adopt flattened 1,3-alternate conformations, whereas macrocycles 3 and 7 exist in the form of flattened partial-cone conformations. Standard proton NMR titration analyses were carried out in the case of macrocycles 1a and 2a, and reveal that at least the second of these systems is capable of binding fluoride and chloride anions in CD(2)Cl(2) solution at room temperature (K(a)=571 and 17M(-1) in the case of 2a and F(-) and Cl(-), respectively).     

Rigidified calixarenes bearing four carbamoylmethylphosphineoxide or carbamoylmethylphosphoryl functions at the wide rim

Conformationally rigidified tetraCMPO derivatives have been prepared from calix[4]arene bis(crown ether) 4a in which adjacent oxygens are bridged at the narrow rim by two diethylene glycol links. Acylation of the tetraamine 4c with the CMPO-active ester 5b gave the tetraphosphine oxide 6a, while the tetraphosphinate 6b and the tetraphosphonate 6c were obtained by Arbuzov reaction of tetrabromoacetamido derivative 7 with PhP(OEt)2 or P(OEt)3. The extraction ability of these CMPO derivatives was checked for selected lanthanides and actinides and compared with the analogous compounds 1b, 10b and 10d derived from calix[4]arene tetrapentyl ether. All rigidified bis(crown ether) ligands are more effective extractants than their pentyl ether counterparts and require only 1/10 of the concentration (cL= 10 4M) to obtain the same distribution coefficients, while with CMPO itself a 2,000-fold concentration is necessary. This could be a consequence of a better preorganisation of the ligating functions owing to the rigidity which on the other hand did not change the observed selectivity for americium (DAm/DEu=9-19) and for light lanthanides over heavy ones. NMR relaxivity titration curves show that the complex of Gd3+ with ligand 6a is highly oligomerised in anhydrous acetonitrile over a large range of ligand:metal concentration ratios. Nuclear magnetic relaxation dispersion (NMRD) profiles also showed that large oligomers were formed, and their mean tumbling times were deduced from the Solomon-Bloembergen-Morgan equations. The NMR spectra of dia- and paramagnetic lanthanide complexes with 6a agreed with the presence of two conformers with an elongated calix[4]arene skeleton in which the distances between opposite methylene groups are different. Contrary to what was observed with ligand 2a, the addition of nitrate ions does not labilize the metal complexes, presumably because of the rigidification effect of the ether bridges. Single-crystal X-ray structures were obtained for the active ester 5b and for diphenylphosphorylacetic acid 5a.     

Synthesis and characterization of diametrically substituted tetra-O-n-butylcalix[4]arene ligands and their chelated complexes of titanium,molybdenum, and palladium

The ligation properties of three new upper-rim-substituted calix[4]arene ligands, 5,17-bis(hydroxymethyl)-tetra-n-butoxycalix[4]arene ((HOCH2)2-nBu4Clx, 7), 5,17-bis((diphenylphosphinito)methoxy)-tetra-n-butoxycalix[4]arene ((PPh2OCH2)2-nBu4Clx, 8), and 5,17-bis((diphenylphosphino)methyl)-tetra-n-butoxycalix[4]arene ((PPh2CH2)2-nBu4Clx, 10) are reported herein. The newly prepared compounds differ from previously reported diametrically substituted calix[4]arene derivatives in that the lower-rim substituent was n-butyl. The presence of this lower-rim substituent did not reduce the inherent crystallinity of these complexes as purification of all materials occurred via simple crystallizations. The key precursor for the syntheses of 8 and 10 was 7, acquisition of which occurred in six steps starting from tetra-tert-butylcalix[4]arene, 1. Calix[4]arene derivatives include, tetra-n-butoxycalix[4]arene (nBu4Clx, 3), 5,11,17,23-tetrabromo-tetra-n-butoxycalix[4]arene (Br4-nBu4Clx, 4), 5,17-dibromo-tetra-n-butoxycalix[4]arene (Br2-nBu4Clx, 5), 5,17-bis(formyl)-tetra-n-butoxycalix[4]arene ((CHO)2-nBu4Clx, 6), and 5,17-bis(chloromethyl)-tetra-n-butoxycalix[4]arene ((ClCH2)2-nBu4Clx, 9), all of which were synthesized using modifications of existing procedures. Characterization of all compounds occurred, when possible, using 1H, 13C, and 31P NMR, elemental analyses, FAB-MS, ESI-MS, FT-IR, and X-ray crystallography. The solid-state structures of all calix[4]arene intermediates and ligands showed that the annulus adopted the pinched-cone conformation in which the average C(5)...C(17) intraannular separation was 4.5 +/- 0.4 A. Reaction of 7 with CpTiMe3 yielded the cis-chelate, CpTi(Me)[(OCH2)2-nBu4Clx] (11), quantitatively. Data obtained using ESI-MS (positive-ion mode) confirmed the monomer formulation showed above, and 1H NMR spectra provided sufficient information to deduce the nature of the Ti coordination sphere. Reaction of 8 with cis-Cl2Pd(NCPh)2 in refluxing benzene afforded cis-Cl2Pd[(PPh2OCH2)2-nBu4Clx] (12) in good yields. The monomeric identity of this compound was verified by both X-ray crystallography and positive-ion ESI-MS. The cis-bidentate calix[4]arene ligand did not undergo any noticeable contortion upon chelation of the PdCl2 fragment. Acid-promoted decomposition of 12 occurred in the presence of adventitious HCl and gaseous HCl, and the products of this decomposition were 9 and [mu2-ClPd(PPh2OH)(PPh2O)]2. In addition, chelates of 8 that contained Mo(CO)3L (L = NCMe (14a), NCEt (14b), and CO (14c)) showed that the mode of coordination was relatively insensitive to the identity of the metal. X-ray crystallography afforded views of the solid-state structures of 14b,c and, like 12, showed that the Mo(CO)3L fragment resided above the pinched-cone of the calix[4]arene. 1H NMR revealed that C-H/pi interactions existed between L (14a,b) and a phenyl ring of the coordinated phosphinite. Finally, the bis(diphenylphosphine)calix[4]arene ligand (10) readily coordinated the Mo(CO)3L species, but the reaction did not go to completion, as evidenced by 1H NMR, even after a 5 day reaction time. Data suggest that the product is similar to that observed for 12 and 14, but the incomplete reaction complicated attempts to obtain pure material and prohibited definitive assignment of the coordination array.     

杯芳烃衍生物液－液萃取和液膜传输银的对比研究及机理探讨

以4类含硫、硒、氮等杂原子基团二取代的杯[4]芳烃五衍生物（1－14）为中 性载体，在H2O-CHCl3-苦味酸体系萃取银和H2O-CHCl3-H2O液膜体系中传输银进行 了对比研究。萃取和传输结果具有一致性，除了苯并噻唑取代的杯[4]芳烃衍生物 （3－6）外，其它10个含硫、硒、氮的杯[4]芳烃衍生物1－14均对软重金属银和汞 有很高的选择性，而吡啶取代的杯[4]芳烃衍生物7－10对铅有一定的萃取选择性， 其中羟基硫醚取代的杯[4]芳烃衍生物11－14对银的萃取率和传输速率最大。并且 就杯[4]芳烃衍生物对银的传输机理进行了探讨，发现传输速率随源相中金属离子 浓度和有机相中载体浓度的增加而增大，因此推论这是由金属离子浓度梯度推动下 的传输。     

Calix[4]arenes with two different chemical modifications at the bridges

Hexabromocalix[4]arene derivatives (3a and 3b) possessing pairs of dibromomethylene and bromomethylene groups located at distal or proximal positions of the calix scaffold were prepared via photochemical bromination of tetramethoxycalix[4]arene. The dibromomethylene groups undergo hydrolysis to afford calix[4]arenes possessing pairs of carbonyl groups and bromomethylene groups located at distal or proximal bridges (4a and 4b, respectively). The bromomethylene groups of 4 undergo reactions with nucleophiles under S(N)1 conditions to afford a wide array of derivatives possessing two different chemical modifications at the bridges.     

Fluorinated pyrido[2,3-c]pyridazines. II. Synthesis and antibacterial activity of 1,7-disubstituted 6-fluoro-4(1H)-oxopyrido[2,3-c]pyridazine-3- carboxylic acids

Chemical modification of pyridonecarboxylic acid antibacterials with a 1,8-naphthyridine ring, such as enoxacin and tosufloxacin, to their 2-aza derivatives was studied. A new series of 1,7-disubstituted 6-fluoro-4(1H)-oxopyrido[2,3-c]pridazine-3-carboxylic acids (25-27) was prepared by a route involving either alkylation of ethyl 6-fluoro-4(1H)-oxo-7-(p-tolylthio)pyrido[2,3-c]pyridazine-3-carbox ylate (7) or intramolecular cyclization of ethyl 2-(2,6-dichloro-5-fluoronicotinoyl)-2-[2-(p-fluorophenyl)hydraz ono]acetate, (20), followed by displacement reaction with cyclic amines at C-7; the N-1 substituent in these compounds included of ethyl, 2-fluoroethyl and p-fluorophenyl groups, and the C-7 functional group comprised variously-substituted piperazines and pyrrolidines. Antibacterial activities of these compounds were markedly inferior to those of enoxacin and tosufloxacin.     

Synthesis of Flavin–Calix[4]arene Conjugate Derivatives

The synthesis of two new flavin substituted calix[4]arene derivatives, 9 and 10 , is described. The first flavin substituted calix[4]arene derivative 9 was synthesized by the reaction of 3‐methylalloxazine ( 5 ) with 25,27‐bis(3‐bromopropoxy)‐26,28‐dihydroxy‐5,11,17,23‐tetra(tert‐butyl)calix[4]arene ( 4 ) in high yield (92%). The other derivative 10 was prepared from 3‐methylalloxazine‐1‐acetic acid ( 7 ) and 25,27‐bis(3‐cyanopropoxy)calix[4]arene ( 3 ). All new compounds were characterized by a combination of FT‐IR and ¹H‐NMR spectroscopy, and elemental‐analysis techniques.     

含噻二唑基的对叔丁基杯[4]芳烃衍生物的合成及表征

以对叔丁基杯[4]芳烃(1)为原料, 分别与1,2-二溴乙烷、1,3-二溴丙烷在碳酸钾的存在下进行选择性烷基化反应, 生成杯[4]芳烃衍生物2和3. 在氢氧化钠存在下, 化合物2和3与过量的含不同官能团的2-巯基噻二唑反应, 生成下缘含噻二唑基的杯芳烃衍生物4a～4c, 5a～5c, 其结构经¹H NMR, ¹³C NMR, IR, MS和元素分析确证.     

邻甲氧基羰基苄氧基取代杯[4]芳烃衍生物的合成及其性？…

杯芳烃是继冠醚、环糊精之后的第三代主体分子 [1] .据文献 [2 ,3]报道 ,在杯 [4]芳烃下沿酚氧原子上连接乙酸酯得到的四取代衍生物对 Na+ 有很高的选择性 ,核磁与晶体结构研究均证实这是由于羧酸酯的羰基和酚氧基参与了对 Na+ 的配位 ,而且配位基团所形成的包络空间大小与钠离子相匹配 .一般认为 ,随着包络空间改变 ,对金属离子的识别作用会有所变化[4] .但目前对这方面的工作并没有给予更多的重视 .我们发现 ,用 2 -溴甲基苯甲酸甲酯与杯 [4 ]芳烃反应 ,得到了一种新的四取代杯 [4]芳烃衍生物 2 ,萃取研究结果表明 ,该化合物对钾离子有较…     

2]Catenane assembly from calix[4]arene crown ethers [In Process Citation

A variety of novel calix[4]arene-incorporating crown ethers with or without intramolecular hydrogen bonding have been prepared by two efficient methods and utilized as donor rings to assemble calix[4]arene [2]catenanes based on pi-stacking interaction between hydroquinone and bipyridinium units. Treatment of calix[4]arene crown ethers 4, 10a, or 10b, whose cone conformation was fixed by intramolecular hydrogen bonding within the calix[4]arene moiety, with dicationic salt 15 x 2PF6 and dibromide 16 afforded the corresponding [2]catenanes 17a x 4PF6, 17b x 4PF6, and 17c x 4PF6 in 20%, 53%, and 55% yields, respectively, whereas from the reactions of 15 x 2PF6 and dibromide 16 in the presence of conformationally flexible 11 or 12 with a cone conformation kept by two propyl groups, [2]catenanes 18 x 4PF6 and 19 x 4PF6 were obtained in 12% and 6% yields. [2]Catenanes 21a x 4Cl, 21b x 4Cl, and 21c x 4Cl, incorporating calix[4]arene in both the donor and acceptor rings, were also successfully assembled from 10a or 10b, 16, and dicationic salts 20a x 2PF6 or 20b x 2PF6. The dynamic 1H NMR and absorption spectra of the [2]catenanes have been investigated, which revealed a strongest donor-acceptor interaction in 17a x 4PF6 and that the cone [2]catenanes 17a-c x 4PF6 can isomerize to the partial cone isomer at high temperature. The difference of the dynamic properties of these catenanes was discussed. The results demonstrate that catenation is one new general method to change the conformational distributions of calix[4]arenes.     

新型多重氮杂杯[4]芳烃衍生物的合成

对叔丁基杯[4]芳烃-1,3-二醛基衍生物1与水杨酰肼、烟酰肼、异烟酰肼反应, 合成了具有开链结构新型杯[4]多重氮杂衍生物2a～2c, 产率分别为88%, 85%和90%. 化合物1与乙二酰肼、丙二酰肼、己二酰肼反应, 得到具有桥联结构的新型杯[4]多重氮杂衍生物3a～3c, 产率分别为86%, 89%和90%. 新化合物的结构经元素分析、质谱、核磁共振谱等表征证实, 杯[4]芳烃单元均为1,3-取代且采取锥式构象.     

Synthesis and thermal properties of novel calix[4]arene derivatives containing 1,2,3-triazole moiety via K2CO3-catalyzed 1,3-dipolar cycloaddition reaction

Two calix[4]arene derivatives containing 1,2,3-triazole moiety were synthesized via K2CO3-catalyzed1,3-dipolar cycloaddition reaction between calix[4]arene-based azide and active methylene compounds in good yields.The structures of the two compounds synthesized herein were fully confirmed by 1HNMR,,（13）C NMR,and MS（ESI）.The thermal analysis showed that the mass losses of the synthesized compounds 4 and 5 containing 1,2,3-triazole groups are similar to each other.     

Optically pure calix[6]tris-ammoniums: syntheses and host-guest properties toward neutral guests

[reaction: see text] Optically pure calix[6]arenes bearing chiral amino arms 4, 7, and 10 have been synthesized in high yields from the known symmetrically 1,3,5-trismethylated calix[6]arene. For both compounds 7 and 10, the key step consists of an efficient selective alkylation on the narrow rim of the calix[6]arene with Ba(OH)2 as the base. All of these chiral calix[6]tris-amines possess a similar flattened cone conformation with the cavity occupied by the methoxy groups. In contrast to 4 and 7, upon protonation, the enantiopure calix[6]arene 10 can switch to the opposite flattened cone conformation through self-assembly of its ammonium arms in an ion-paired cap which closes the cavity. As shown by NMR host-guest studies and an X-ray structure, the obtained polarized host (10 x 3H+) behaves as a remarkable endo-receptor for small polar neutral molecules. Thanks to the tris-cationic chiral binding site of 10 x 3H+, it was shown that the guests experience a chiral environment upon inclusion. Finally, the first example of enantioselective molecular recognition inside the cavity of a calix[6]arene has been evidenced with a racemic 1,2-diol guest.     

丙醛间苯二酚杯[4]芳烃烷基化衍生物的合成

以间苯二酚和丙醛为原料合成了丙醛杯[4]芳烃(1),1经不同的烷基化反应合成了新的丙醛杯[4]芳烃烷基化衍生物,其结构经1H NMR和IR表征。