Calix[6]pyrrole and hybrid calix[n]furan[m]pyrroles (n+m=6): syntheses and host-guest chemistry

Calix[6]pyrrole 2 and the "hybrid systems" calix[3]furan[3]pyrrole 12, calix[2]furan[4]pyrrole 13, and calix[1]furan[5]pyrrole 14, have been synthesized by increasing conversion of the furan units present in the readily accessible calix[6]furan 3 to pyrroles. The host-guest chemistry of these novel macrocycles towards a number of anions, including halogen ions, dihydrogen phosphate, hydrogen sulfate, nitrate, and cyanide has been investigated in solution by (1)H NMR titration techniques and/or phase transfer experiments. The solid-state structures of the free receptors 2, 12, and 13, the 1:1 complexes of calix[6]pyrrole 2 with chloride and bromide, and the 1:1 complex of 14 with chloride are also reported.     

Strain-Induced Ring Expansion Reactions of Calix[3]pyrrole-Related Macrocycles

The recent discovery of calix[3]pyrrole, a porphyrinogen-like tripyrrolic macrocycle, has provided an unprecedented strain-induced ring expansion reaction into calix[6]pyrrole. Here, we synthesized calix[n]furan[3-n]pyrrole (n=1∼3) macrocycles to investigate the reaction scope and mechanism of the ring expansion. Single crystal X-ray analysis and theoretical calculations revealed that macrocyclic ring strain increases as the number of inner NH sites increases. While calix[1]furan[2]pyrrole exhibited almost quantitative conversion into calix[2]furan[4]pyrrole within 5 minutes, less-strained calix[2]furan[1]pyrrole and calix[3]furan were inert. However, N-methylation of calix[2]furan[1]pyrrole induced a ring-expansion reaction that enabled the isolation of a linear reaction intermediate. The mechanism analysis revealed that the ring expansion consists of regioselective ring cleavage and subsequent cyclodimerization. This reaction was further utilized for synthesis of calix[6]-type macrocycles.     

Synthesis and crystal structure of uranium(IV) complexes with calix[n]arenes (n = 4, 6 and 8): mononuclear, polynuclear and 1D polymeric species

Reactions of UCl4 with calix[n]arenes (n = 4, 6) in THF gave the mononuclear [UCl2(calix[4]arene - 2H)(THF)2].2THF (.2THF) and the bis-dinuclear [U2Cl2(calix[6]arene - 6H)(THF)3]2.6THF (.6THF) complexes, respectively, while the mono-, di- and trinuclear compounds [Hpy]2[UCl3(calix[4]arene - 3H)].py (.py), [Hpy](4)[U2Cl6(calix[6]arene - 6H)].3py (.3py), [Hpy]3[U2Cl5(calix[6]arene - 6H)(py)].py (.py) and [Hpy]6[U3Cl11(calix[8]arene - 7H)].3py (.3py) were obtained by treatment of UCl4 with calix[n]arenes (n = 4, 6, 8) in pyridine. The sodium salt of calix[8]arene reacted with UCl4 to give the pentanuclear complex [U{U2Cl3(calix[8]arene - 7H)(py)5}2].8py (.8py). Reaction of U(acac)4 (acac = MeCOCHCOMe) with calix[4]arene in pyridine afforded the mononuclear complex [U(acac)2(calix[4]arene - 2H)].4py (.4py) and its treatment with the sodium salt of calix[8]arene led to the formation of the 1D polymer [U2(acac)6(calix[8]arene - 6H)(py)4Na4]n. The sandwich complex [Hpy]2[U(calix[4]arene - 3H)2][OTf].4py (.4py) was obtained by treatment of U(OTf)4 (OTf = OSO2CF3) with calix[4]arene in pyridine. All the complexes have been characterized by X-ray diffraction analysis.     

Synthesis of cone, partial-cone, and 1,3-alternate 25, 27-Bis

The preparation of 25,27-bis[1-(2-ethyl)hexyl]- and 25, 27-bis[1-(2-tert-butoxy)ethyl]calix[4]arene-crown-6 combining one polyether crown-6 and one alkylchain O-attached on each side of a calix[4]arene in the cone, partial-cone, and 1,3-alternate conformations are reported. The control over 25, 27-bisalkylcalix[4]arene-crown-6 conformation via varying specific reaction conditions was studied. The series of calix[4]arenes have been prepared by two routes, which differ in the order in which the alkyl or polyether groups were introduced. Moreover, methods have been developed to selectively prepare the cone and partial-cone conformers by using an appropriate base in the alkylation reactions. The conformations of these new derivatives have been probed by (1)H NMR analysis and X-ray crystallography. The (1)H and (13)C NMR spectra of 25,27-bis[1-(2-ethyl)hexyl]calix[4]arene-crown-6, 1, 3-alternate 1, cone 2, and partial-cone 3 are also discussed.     

Chiral Calix[3]pyrrole Derivatives: Synthesis,Racemization Kinetics,and Ring Expansion to Calix[9]- and Calix[12]pyrrole Analogues

Chiral pyrrolic macrocycles continue to attract interest. However, their molecular design remains challenging. Here, we report a calixpyrrole-based chiral macrocyclic system, calix[1]furan[1]pyrrole[1]thiophene ( 1 ), synthesized from an oligoketone. Macrocycle 1 adopts a partial cone conformation in the solid state, and undergoes racemization via ring inversion. Molecular dynamics simulations revealed that inversion of the thiophene is the rate determining step. Pyrrole N-methylation suppressed racemization and permitted chiral resolution. Enantioselective N-methylation also occurred in the presence of a chiral ammonium salt, although the stereoselectivity is modest. A unique feature of 1 is that it acts as a useful synthetic precursor to yield several calix[n]furan[n]pyrrole[n]thiophene products (n=2–4), including a calix[12]pyrrole analogue that to our knowledge constitutes the largest calix[n]pyrrole-like species to be structurally characterized.     

Extraction of copper with p-tert-butyl-calixarenes

The extraction of copper with calixarenes was researched by comparing the results from calix[4]-,calix[6]-and calix[8]-arenes.Hie extraction ability increased as the order:calix [4]-> calix[8]-> calix[6]-arenes,with the binding ratio being 1:1.The extraction mechanism was also discussed,and itsequation Cu(NH3)42 H2L(0)Cu(NH3)4L(0) 2H and the extraction equilibrium constants(Ker)for calix[6]-and calix[8]-arenes were obtained respectively.     

Energies of charge transfer and supramolecular interactions of some mono O-substituted calix[6]arenes with [60]fullerene by absorption spectrometric method

Equilibria for the formation of supramolecular complexes of [60]fullerene with a series of mono O-substituted calix[6]arenes, namely: (i) 37-methoxy-38,39,40,41,42-pentahydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (1), (ii) 37-allyl-38,39,40,41,42-pentahydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (2), (iii) 37-phenacyl-38,39,40,41,42-pentahydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (3), (iv) 37-ethylester-38,39,40,41,42-pentahydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (4) and (v) 37-benzyl-38,39,40,41,42-pentahydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (5) have been studied in CCl4 medium by absorption spectroscopic technique. The stoichiometry has been found to be 1:1 ([60]fullerene:calix[6]arene) in each case. An absorption band due to charge transfer (CT) transition is observed in each case in the visible region. The vertical ionisation potentials (I(D)(v)) of all the calix[6]arenes under study have been estimated utilising CT transition energy. The experimental I(D)(v) values also yield a good estimate of the electron affinity of [60]fullerene. The degrees of CT in the ground state of the complexes have been found to be very low (about 0.15%). Resonance energy of the complexes have been estimated. Thermodynamic parameters for the supramolecular complex formation of [60]fullerene with mono O-substituted calix[6]arene receptors are reported. It is observed that among the calix[6]arenes under the present study, only 1 and 4 form inclusion complexes with [60]fullerene. This has also been substantiated by theoretical calculation using PM3 method. Thus presence of one substituent group (of different types) on the lower rim of the calix[6]arene molecule has been shown to govern the host-guest complexation process.     

A paradigm shift in the construction of heterobimetallic complexes: synthesis of group 2 & 4 metal-calix[6]arene complexes

Deprotonation of calix[6]arenes with barium in methanol followed by the addition of [Ti(OPr(i))(4)] or [Zr(OBu(n))(4)] is effective in the formation of novel dimeric 2:1 barium-titanium(IV)/zirconium(IV) calix[6]arene complexes. In these complexes a central Ti(IV)/Zr(IV) coordinated in the exo-position connects the two calix[6]arenes in the 1,3-alternate conformation, each with an endo-barium sharing common phenolate groups with the titanium/zirconium centre and participating in cation-pi interactions. A homometallic barium calix[6]arene dimer was also prepared wherein the calix[6]arenes are in the 1,3-alternate conformation with each coordinating one endo- and one exo-barium centre. The exo-barium cations connect the two calix[6]arenes through bridging methanol ligands. In this and the heterometallic complexes, cation-pi complexation of the Ba(2+) ion within the 1,3 alternate conformation of calix[6]arene facilitates the formation of the dimeric complexes in methanol. In contrast, the smaller Sr(2+) ion did not form similar complexes in methanol, and the formation of an analogous 2:1 strontium-titanium calixarene complex required the use of the more sterically demanding donor alcohol, isopropanol, the resulting complex being devoid of cation-pi interaction. The results show (i) that a subtle interplay of solvation strength, coordination array type and cavity/cation size influences the accessibility of heterobimetallic complexes based on calix[6]arenes, and (ii) a synergistic endo-exo binding behaviour.     

New chiral macrocyclic ligands. Design and synthesis of (R)-cysteine-containing calix[4]arenes

Four cysteine-containing calix[4]arenes, including three bis-cysteine bridged and one non-bridged, were synthesized by the reaction of calix[4]arene diacid dichloride with the corresponding S-alkylated cysteine esters.     

2]Catenane assembly from calix[4]arene crown ethers [In Process Citation

A variety of novel calix[4]arene-incorporating crown ethers with or without intramolecular hydrogen bonding have been prepared by two efficient methods and utilized as donor rings to assemble calix[4]arene [2]catenanes based on pi-stacking interaction between hydroquinone and bipyridinium units. Treatment of calix[4]arene crown ethers 4, 10a, or 10b, whose cone conformation was fixed by intramolecular hydrogen bonding within the calix[4]arene moiety, with dicationic salt 15 x 2PF6 and dibromide 16 afforded the corresponding [2]catenanes 17a x 4PF6, 17b x 4PF6, and 17c x 4PF6 in 20%, 53%, and 55% yields, respectively, whereas from the reactions of 15 x 2PF6 and dibromide 16 in the presence of conformationally flexible 11 or 12 with a cone conformation kept by two propyl groups, [2]catenanes 18 x 4PF6 and 19 x 4PF6 were obtained in 12% and 6% yields. [2]Catenanes 21a x 4Cl, 21b x 4Cl, and 21c x 4Cl, incorporating calix[4]arene in both the donor and acceptor rings, were also successfully assembled from 10a or 10b, 16, and dicationic salts 20a x 2PF6 or 20b x 2PF6. The dynamic 1H NMR and absorption spectra of the [2]catenanes have been investigated, which revealed a strongest donor-acceptor interaction in 17a x 4PF6 and that the cone [2]catenanes 17a-c x 4PF6 can isomerize to the partial cone isomer at high temperature. The difference of the dynamic properties of these catenanes was discussed. The results demonstrate that catenation is one new general method to change the conformational distributions of calix[4]arenes.     

From calixfurans to heterocyclophanes containing isopyrazole units

Cyclic poly-1,4-diketones 2, obtained by the oxidation of the furan units present in calix[4]furan 1a and calix[6]furan 1c have been converted into the novel heterocyclophanes 4a and 4c containing four and six isopyrazole units, respectively. Solution studies have demonstrated the ability of 4a and 4c to act as ligands for transition metals. The crystal structures of 4a and the coordination compound formed by 4c with 2 equiv. of cis-PtCl₂(DMSO)₂ have been determined. In the solid state 4c is shown to bind aromatic substrates within its cavity.     

Synthesis and Properties of a Series of Novel Calix[6]arene Diazo Derivatives

In this study, seven new compounds p-(4-butyl-phenylazo)calix[6]arene(1), p-(4-(phenylazo)phenylazo)calix[6]arene (2),p-(4-hydroxyphenylazo)calix[6]arene (3),p-{4-[N-(thiazol-2-yl)sulfamoyl]phenylazo\}calix[6]arene(4), p-(4-acetamidophenylazo)calix[6]arene (5),p-(thiazol-2-ylazo)calix[6]arene (6) andp-(2-sulfanylphenylazo)calix[6]arene (7) have been synthesizedfrom calix[6]arene by diazo coupling with the corresponding aromaticamines. UV-Vis, IR, ¹H and ¹³C NMR spectral data have been used to elucidate the structures of the compounds elemental analyses     

三桥联杯[6]酰腙衍生物和相关化合物的合成

以杯[6]芳烃和杯[6]-1,4-冠-4为起始原料,经过醚化引入酯基,接着用水合肼肼解得到杯[6]酰肼衍生物2和6,然后再与水杨醛进行缩合反应,高产率合成了两例杯[6]酰腙衍生物3和7.化合物6与2倍的二水杨醛乙二醚进行"1+2"缩合反应,得到了一例新型结构的杯[6]-1,4-2,6-3,5-三桥联酰腙衍生物8,产率73%.新化合物2,3,6,7和8的结构经元素分析、红外光谱、质谱、核磁共振谱等证实.     

Supramolecular incorporation of fullerenes on gold surfaces: comparison of C60 incorporation by self-assembled monolayers of different calix[n]arene (n = 4, 6, 8) derivatives

[reaction: see text] Two new calix[6]arene derivatives 3 and 4 in a 1,4-anti conformation and one calix[8]arene derivative 5 were synthesized. SAMs of calix[n]arene (n = 4, 6, 8) derivatives 1-5 were formed on gold bead electrodes. Cyclic voltammetry with Ru(NH3)6(3+/2+) as a redox probe, together with impedance spectroscopy and reductive desorption, indicates that SAMs of 5 have a higher coverage than those of 3 and 4 due to the presence of hydrogen bonding and possibly its conformation. Noncovalent immobilization of C60 on gold surfaces was achieved with SAMs of calix[8]arene derivative 5 but not with those of 1-4.     

Synthesis of Schiff Base Calix [4] arene Crowns

This letter reports the synthesis of Schiff base calix [4] arene crowns containing m-xylylene phenol subunit, in which calix [4] arene Schiff base crowns 2a,2b and 2c were formed by 1:1 condensation of calix [4] arene diamine 1 with dialdehydes (2,6-diformyl-4-chlorophenol 3a,2,6-diformyl-4-methylphenol 3b,2,6-diformyl-4-tert-butylphenol 3c)under high dilute condition in refluxing anhydrous ethanol in 65-70% yield.     

para‐Sulfonated Calixarenes Used as Synthetic Receptors for Complexing Photolabile Cholinergic Ligand

The water‐soluble tetra‐, hexa‐ and octasulfonated calix[4]arenes, calix[6]arenes, and calix[8]arenes 1 – 3 , respectively, were investigated as potential synthetic receptors for photolabile cholinergic ligand A , a photolytic precursor of choline. Ligand A is a bifunctional molecule carrying a photolabile 2‐nitrobenzyl group at one end and a choline moiety at the other end. Results from NMR studies have shown that calixarenes 1 – 3 form stable 1 : 1 complexes with A , having similar binding potential to that observed with the cholinergic enzymes acetylcholinesterase and butyrylcholinesterase. Further studies have suggested that calix[8]arene forms a ditopic complex by binding concomitantly to both the cationic choline moiety and the aromatic photolabile group of A , whereas calix[4]arene and calix[6]arene form monotopic complexes with A . The ditopic complex between calix[8]arene and A results from mutually induced fitting process, while the monotopic complexes between calix[4]arene and A can be regulated by pH: at neutral pH, calix[4]arene specifically binds the cationic choline moiety, while, at acidic pH, it complexes unselectively both the cationic choline moiety and the aromatic group of A . Our results show that para‐sulfonated calixarenes are versatile artificial receptors which bind in various ways to the bifunctional photolabile cholinergic ligand A , depending on their size, geometry, and state of protonation.     

A novel hybrid macrocyclic receptor based on bile acid and calix[4]arene frameworks for metal ion recognition

A novel hybrid macrocyclic receptor based on bile acid and calix[4]arene has been synthesized using the α-face of the bile acid and cone-conformation of calix[4]arene. Metal recognition properties of receptor were investigated. The receptor showed the strongest affinity for Hg²⁺ in acetonitrile. The stoichiometry of the Receptor:Hg²⁺ was 1:1.     

一锅法合成含两种桥联链的杯[4]双冠醚和双杯[4]冠醚

报道了"一锅法"合成含两种桥联链的新型杯[4]双冠醚和双杯[4]冠醚.杯[4]芳烃先与N,N’-乙撑基-二(2-氯乙酰胺)发生"1+1"缩合反应,然后直接加入三甘醇双对甲苯磺酸酯继续进行"2+2"缩合反应,合成了含两种桥联链的新型双杯[4]冠醚4.按照相似程序,杯[4]芳烃先后与N,N’-乙撑基-二(2-氯乙酰胺)、溴乙酸乙酯和二乙烯三胺反应,得到含两种桥联链的新型杯[4]双冠醚5.化合物5进一步与异硫氰酸苯酯反应合成带硫脲支链的杯[4]双冠醚6.所有新化合物的结构与构象经元素分析、质谱、核磁共振谱等表征证实.     

Synthesis, crystal structure and reactivity of uranium(IV) complexes with p-tert-butylcalix[4]arene ligands

Reactions of UCl4 with 25,27-dimethoxy-5,11,17,23-tetra-tert-butylcalix[4]arene (H2Me2calix) in THF or pyridine at 80 degrees C gave [UCl2(Me2calix)L2] [L = THF (1) or pyridine (2)]. Similar treatment of U(acac)(4) (acac = MeCOCHCOMe) with H2Me2calix in THF or pyridine afforded [U(acac)2(Me2calix)] (3). The bis-calixarene compound [U(Me2calix)(H2calix)] (4) was obtained by reaction of U(OTf)4 or U(OTf)3 with H2Me2calix in pyridine at 110 degrees C. Treatment of UCl4 with H2Me2calix in pyridine at 110 degrees C gave [Mepy][UCl2(Hcalix)(py)2] (5) resulting from demethylation and acid cleavage of the methoxy groups of the calixarene ligand of 2. Adventitious traces of air were responsible for the formation of [Hpy][Mepy]4[{UCl(calix)}3(mu3-O)][UCl6] (6) during the reaction of UCl4 and H2Me2calix, and of [{U(Me2calix)(mu3-O)LiCl(THF)}2] (7) during the reaction of 2 with tBuLi. The X-ray crystal structures of 1.2THF, 2.2py, 3.0.25L (L = THF and py), 4.2py, 5, 6.3py and 7.THF have been determined.     

Synthesis,structures, and conformational characteristics of calixarene monoanions and dianions

The synthesis, complete characterization, and solid state structural and solution conformation determination of calix[n]arenes (n = 4, 6, 8) is reported. A complete series of X-ray structures of the alkali metal salts of calix[4]arene (HC4) illustrate the great influence of the alkali metal ion on the solid state structure of calixanions (e.g., the Li salt of monoanionic HC4 is a monomer; the Na salt of monoanionic HC4 forms a dimer; and the K, Rb, and Cs salts exist in polymeric forms). Solution NMR spectra of alkali metal salts of monoanionic calix[4]arenes indicate that they have the cone conformation in solution. Variable-temperature NMR spectra of salts HC4.M (M = Li, Na, K, Rb, Cs) show that they possess similar coalescence temperatures, all higher than that of HC4. Due to steric hindrance from tert-butyl groups in the para position of p-tert-butylcalix[4]arene (Bu(t)C4), the alkali metal salts of monoanionic Bu(t)C4 exist in monomeric or dimeric form in the solid state. Calix[6]arene (HC6) and p-tert-butylcalix[6]arene (Bu(t)C6) were treated with a 2:1 molar ratio of M(2)CO(3) (M = K, Rb, Cs) or a 1:1 molar ratio of MOC(CH(3))(3) (M = Li, Na) to give calix[6]arene monoanions, but calix[6]arenes react in a 1:1 molar ratio with M(2)CO(3) (M = K, Rb, Cs) to afford calix[6]arene dianions. Calix[8]arene (HC8) and p-tert-butylcalix[8]arene (Bu(t)()C8) have similar reactivity. The alkali metal salts of monoanionic calix[6]arenes are more conformationally flexible than the alkali metal salts of dianionic calix[6]arenes, which has been shown by their solution NMR spectra. X-ray crystal structures of HC6.Li and HC6.Cs indicate that the size of the alkali metal has some influence on the conformation of calixanions; for example, HC6.Li has a cone-like conformation, and HC6.Cs has a 1,2,3-alternate conformation. The calix[6]arene dianions show roughly the same structural architecture, and the salts tend to form polymeric chains. For most calixarene salts cation-pi arene interactions were observed.