短管螺旋波放电中等离子体参数测量和模式转化研究

对长度为45 cm的短放电管螺旋波放电等离子体进行了Langmuir探针、原子发射光谱以及集成电荷耦合检测器(ICCD)检测诊断,研究螺旋波等离子体的放电特性.Langmuir探针数据显示电子密度在射频功率增加过程中出现两次大幅增长,由此确认了放电模式的转换及螺旋波放电模式的出现.发射光谱测量结果与Langmuir探针测量的电子密度数据一致,发现Ar原子和Ar离子的谱线强度与放电模式变化有着密切相关性.而通过对不同放电模式的ICCD测量,获得射频功率吸收因放电模式转变而变化的方式,认为放电模式转换时电子行为和能量传递方式也发生着变化.     

射频电感耦合夹层等离子体中的模式转换

本文利用微波相位法和光谱诊断法, 研究了ICP放电等离子体在圆台状夹层等离子体中E模和H模相互转换的物理现象. E模和H模的之间转换过程是一个瞬间突变的, 转换点的输入功率随真空室压强的变化而变化. H模向E模转换的阈值功率低于E模向H模转换的值, 等离子体参数随输入功率变化曲线类似于铁磁物质中的磁滞回线. Ar II 408.2 nm谱线的强度的变化规律和电子密度随功率变化的规律基本一致. 通过本实验可以获得一种电子密度范围为3.85×10¹¹ cm^-3 < n_e < 4.68× 10¹¹ cm^-3, 外表面积为0.3 m², 厚度为2 cm稳定工作的等离子体源.     

远程Ar等离子的发射光谱研究

远程等离子体可以有效避免电子与离子碰撞产生的刻蚀作用,加强自由基反应,取得更好的改性效果,在膜材料领域具有重要的应用价值。为了更加深入研究远程等离子体中电子状态及其变化规律,采用发射光谱法对远程Ar等离子体进行了诊断,研究了射频功率、反应腔室内压强、距放电中心距离对远程Ar等离子体发射光谱强度、电子密度和电子温度的影响。结果表明,在690～890 nm区域中特征峰较为集中,由ArⅠ原子谱线占主导,且谱线强度的变化规律和电子密度的变化规律相同。通过玻尔兹曼斜率法选取3条ArⅠ谱线计算了不同放电参数下的电子温度。电子温度随射频功率、反应腔室内压强、距放电中心距离的改变而改变。射频功率从30 W增加到150 W时,电子温度从3 105.39 K降低至2 552.91 K。压强从15 Pa增加到25 Pa时,电子温度从3 066.53 K降低到2 593.32 K,当压强继续增加到35 Pa时,电子温度则增加至2 661.71 K。在距放电中心0～10 cm处由于等离子体电位增大,电子温度上升,而10 cm后电子温度不断下降在距放电中心80 cm处趋于0 K。通过分析ArⅠ696.894谱线的...     

射频容性耦合等离子体放电特性的光谱诊断

利用流体模型模拟和发射光谱实验诊断相结合的方法,研究了中等气压、中等功率下射频容性耦合等离子体的放电特性。理论上,采用基于流体模型的COMSOL软件仿真,建立一维等离子体放电模型,以Ar气为工作气体,研究了不同气压以及不同射频输入功率下等离子体电子温度和电子密度的分布规律。实验上,依据仿真模型设计制作了相同尺寸的密闭玻璃腔体和平板电极,采用13.56 MHz射频放电技术电离腔体内的工作气体Ar气,测量了不同气压、不同射频输入功率时放电等离子体的发射光谱。通过分析和选择适当的Ar Ⅰ和Ar Ⅱ的特征谱线,分别利用玻尔兹曼斜率法以及沙哈-玻尔兹曼方程计算了等离子体的电子温度与电子密度,并结合模拟仿真结果对光谱诊断结果进行了修正。结果表明：当气体压强为300~400 Pa、输入功率为600~800 W时,等离子体近似服从玻尔兹曼分布,此时利用光谱法得到的等离子体参数与仿真结果相符合。仿真模拟与光谱实验诊断相结合的方法可初步诊断出中等气压下等离子体的放电参数,增加了玻尔兹曼斜率法和沙哈-玻尔兹曼方程在等离子体放电中的使用范围,扩大了光谱法在低电子密度容性耦合等离子体参数诊断的应用场合,为中等气压容性耦合等离子体在工业与军事上的应用研究提供了重要物理状态的分析手段。     

射频感应耦合Ar-N2等离子体物理特性的Langmuir探针测量及理论研究

分别通过Langmuir探针测量和动力学模型模拟方法研究了射频感应耦合Ar-N2等离子体中电子能量分布、电子温度、电子密度等物理量随N2含量的变化规律.实验研究结果表明:电子能量分布呈现出非Maxwell型分布,并由双温分布向三温分布过渡;电子温度在不同的气压下随N2含量的增加呈现出不同的变化规律.在放电气压小于1.3 Pa时,电子温度随N2含量的增加而下降;当气压大于1.3 Pa时,电子温度随N2含量的增加先迅速上升而后缓慢下降.在不同的放电气压下,电子密度随N2含量的增加迅速下降.数值模拟结果与Langmuir探针测量结果趋势一致.     

Langmuir探针诊断低压氢等离子体电子密度与温度

为研究实验参数对螺旋波诱导的低压氢等离子体状态的影响,用Langmuir探针对等离子体伏安特性曲线进行了原位诊断,采用双曲正切函数的指数变换模型拟合曲线,根据Druyvesteyn方法得到状态参数电子密度、有效电子温度和电子能量几率函数,分析了它们随实验参数的变化规律。结果表明:射频输入功率、气压和约束磁场对等离子体状态有较大影响。随着射频射入功率增大,放电模式发生转变,电子密度跳跃增长;随着气压增大,电子密度先增大后减小,1.5 Pa为最佳电离气压,随约束磁场的增强呈线性增长;有效电子温度随功率和气压的增大而下降,随约束磁场的增强线性降低,电子能量几率函数曲线峰位和高能部分都向低能移动,与有效电子温度变化规律吻合。     

容性耦合射频氩等离子体放电诊断研究及仿真模拟

针对中等气压、中等功率下射频容性耦合(CCRF)等离子体的放电特性,采用基于流体模型的COMSOL软件仿真,建立一维等离子体放电模型,以Ar为工作气体,研究同一气压时不同射频输入功率下等离子体电子温度和电子密度的分布规律。同时依据仿真模型设计制作相同尺寸的密闭玻璃腔体和平板电极,实验测量了不同射频输入功率时放电等离子体的有效电流电压及发射光谱,进而计算等离子体的电子温度及电子密度;利用玻耳兹曼双线测温法,得到光谱法下等离子体的电子温度及电子密度。结果表明:当气体压强为250 Pa、输入功率为100~450 W时,等离子体电压电流呈线性关系,电子密度随功率的增大而增大,而电子温度并未随功率的变化而有明显变化,其与功率无关。运用仿真模拟验证了实验的准确性,通过比较,三种方法所得的结果相近。通过结合等效回路法、光谱法和数值模拟仿真法初步诊断出中等气压下等离子体的放电参数,提出了结合三种方法作为实验研究的方法,使实验结果更具说服力,证明其方法的可靠性,也为进一步的等离子体特性研究提供依据。     

电负性气体的掺入对容性耦合Ar等离子体的影响

本文利用朗缪尔静电探针对掺入了电负性气体O₂, Cl₂, SF₆的由4068 MHz激发的单射频容性耦合Ar等离子体进行了诊断测量. 测量结果表明: 随着电负性气体流量的增加, 电子能量概率分布函数出现了高能峰, 高能峰且有向高能侧漂移的现象; 电负性气体掺入Ar等离子体后显著降低了等离子体的电子密度; 电子温度随着电负性气体流量比的增加而升高. 另外, 本文还测量了掺入三种电负性气体后在不同流量比下的混合气体等离子体的电负度α . 对实验现象进行了初步的解释. 关键词： 电负性等离子体 电子密度 电子温度 电负度     

气压对于低气压双频容性耦合Ar/O2 等离子体放电特性影响的研究

 研究了气压对双射频氩氧混合等离子体电子温度和电子密度的影响。在13.56MHz低频功率和94.92MHz高频功率固定为60W和氩氧气体比为1:9的情况下，利用发射光谱法分析了气压不同时氩氧混合等离子体的放电光谱中的特征谱线的变化规律。使用一维质点网格法(PIC-MC)静电模型计算了电子温度和电子密度。结果表明：电子温度随着气压的增加先降低后升高，与实验结果趋势相吻合；电子密度随着气压的增加先增大后减小。     

射频感应耦合Ar-N2等离子体物理特性的Langmuir探针测量及理论研究

分别通过Langmuir探针测量和动力学模型模拟方法研究了射频感应耦合Ar-N₂等离子体中电子能量分布、电子温度、电子密度等物理量随N₂含量的变化规律.实验研究结果表明：电子能量分布呈现出非Maxwell型分布,并由双温分布向三温分布过渡;电子温度在不同的气压下随N₂含量的增加呈现出不同的变化规律.在放电气压小于1.3 Pa时,电子温度随N₂含量的增加而下降;当气压大于1.3 Pa时,电子温度随N₂关键词： 感应耦合等离子体 2混合气体放电')" href="#">Ar-N₂混合气体放电 电子能量分布 Langmuir探针     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.