α-吡唑基-N-苯基-α-氨基膦酸酯的合成及生物活性的初步研究

α－氨基膦酸及其酯与α－氨基酸结构类似,其具有抑菌［１］、抗肿瘤［２］、杀虫［３］以及抗植物病毒［４～７］的活性．α－氨基膦酸酯上与磷原子相连的２个烷氧基不同、α位碳原子以及氨基上取代基的不同将导致生物活性的巨大差异［８］．吡唑是一具有多种生物活性的...     

含有手性甲基膦酸酯基的十一聚核糖核苷酸的合成

含有手性甲基膦酸酯基的十一聚核糖核苷酸的合成周英姿，王来新，张礼和（北京医科大学天然药物及仿生药物国家重点实验室，北京，１０００８３）关键词酶性核酸，３＇，５＇－二胞嘧啶核苷甲基膦酸酯，立体化学，手性底物Ｃｅｃｈ［１］、Ａｌｔｍａｎ［２］和Ｓｙｍｏｎ...     

α-硫羰基硫代甲酰吗啉的合成及反应研究

α－硫羰基硫代甲酰胺类化合物于１９８０年被合成［１～３］，但对其性质、反应性及在有机化学中的应用尚未见报道．含有两个硫羰基的化合物为深红或深绿色晶体，反应活性较大，可作为有机合成原料、远红外吸收染料、激光Ｑ开关及有机导体等［４］．对该类化合物的研究具...     

取代苯甲醛肟羧酸酯的合成及生物活性研究(Ⅱ)——α-烷硫基苯甲醛肟羧酸酯的合成及生物活性

肟醚及肟酯衍生物是一类具有优良的杀虫、杀菌、杀螨及除草活性的化合物，有关此类化合物的研究非常活跃［１，２］．本研究组对拟除虫菊酯与芳香肟衍生物进行研究，发现菊酸肟酯类化合物具有良好的抗烟草花叶病毒和杀虫活性［３］．本文在前期研究工作的基础上，将烷硫基...     

二（三）苄基锡不饱和烃基膦酸酯的合成

合成了１０种二（三）苄基锡不饱和烃基膦酸酯［（ＰｈＣＨ２）ｎＳｎ］ｎ－１Ｏ２Ｐ（Ｏ）Ｒ（ｎ＝２，３；Ｒ＝—Ｃ≡ＣＰｈ，—Ｃ≡ＣＣ５Ｈ１１－ｎ，—Ｃ≡ＣＣＨ２ＯＣＨ３，—Ｃ≡ＣＣＨ２ＯＣ２Ｈ５，—ＣＨ＝ＣＣｌＰｈ），利用元素分析、核磁共振氢谱和ＴＧ－ＤＴＡ对其组成和结构进行了表征．初步生物活性测试表明，有些化合物具有较强的杀螨和杀菌活性     

α—[2—（2,4—二氯苯氧基）丙酰氧基]烃基膦酸酯的合成与生物活性

α┐［２┐（２．４┐二氯苯氧基）丙酰氧基］烃基膦酸酯的合成与生物活性贺红武刘钊杰＊汪军（华中师范大学有机合成化学研究所武汉４３００７９）（孝感师范高等专科学校化学系孝感）关键词羟基膦酸酯，合成，生物活性，除草剂１９９７－１０－２１收稿，１９９８－０４...     

(R)-N-酰基四氢噻唑-2-硫酮-4-羧酸在DCC存在下与胺的反应

由Ｎ－乙酰四氢噻唑－２－硫酮－４－羧酸（［α］２０Ｄ－１０９．８３°），及Ｎ－苯甲酰四氢噻唑－２－硫酮－４－羧酸（［α］２０Ｄ－１１２．２２°），在Ｎ，Ｎ′－二环己基二亚胺（ＤＣＣ）存在下分别与环己胺、苯胺反应得到光学活性产物（Ｒ）－Ｎ－乙酰四氢噻唑－２－硫酮－４－甲酰环己胺（［α］１７Ｄ－７４．５°），及（Ｒ）－Ｎ－苯甲酰四氢噻唑－２－硫酮－４－甲酰苯胺（［α］１９Ｄ－７．０４°）。用量子化学ＰＭ３方法研究了反应物和产物的电子结构。     

聚苯基膦酸双酚A酯的合成与表征

聚苯基膦酸双酚Ａ酯的合成与表征唐旭东陈晓婷王玉忠杨科珂王波（四川联合大学化学系成都６１００６４）吴大诚（四川联合大学轻纺学院成都６１００６５）关键词聚膦酸酯，阻燃剂，熔融缩聚，热性能聚膦酸酯类化合物是一类重要的磷系阻燃剂［１～３］，与传统的非聚...     

石墨电极上硫化钠的阳极氧化机理探索

电解硫化氢气体的碱性吸收液（Ｎａ２Ｓ表示）产生单质硫和氢气的研究是治理硫化氢废气的一种新方法［１ -７］,较之Ｃｌａｕｓ法有许多优点［３,４］,这对环境保护和资源回收均具有重要的实际意义．文献对硫化物水溶液电化学氧化机理的研究主要着重于在某些贵金属阳极上,包括某些硫化矿的湿法冶金反应过程的研究［８,９］,光电化学电池中使用多硫化物的研究［１０ -１３］,以及硫化物电解时产生单质硫的电催化活性研究［１４］等 ;但在石墨阳极上硫化物电化学氧化机理的研究报导却很少［３,４］．本文研究在石墨阳极上硫化钠水溶液…     

硫（硒）代磷酸酯—膦酸酯类化合物除草活性的构效关系

利用与自由能有关的取代基物理化学参数，考察了硫（硒）代磷酸酯－膦酸酯类化合物对除草活性的相关性．根据Ｈａｎｓｃｈ方程及多元回归分析，进行了结构与活性定量关系的研究，建立了较好的结构与活性相关式．     

Book Reviews

Abstract

HANDBOOK FOR ESTIMATING PHYSICOCHEMICAL PROPERTIES OF ORGANIC COMPOUNDS, by M. Reinhard and A. Drefal, 228 pages, J. Wiley, New York (1999). ISBN 0—471—172634. UK £ 210.00

THE CHEMISTRY OF POLLUTION, by G. Fellenberg, 192 pp. J. Wiley & Sons, Chichester, U.K. (1999). ISBN 0—471—980889. UK£ 24,95.

NATURAL ATTENUATION OF FUELS AND CHLORINATED SOLVENTS IN THE SUBSURFACE, by T.H. Wiedemeier, H.S. Rifai, C.J. Newell and J.T. Wilson, 617 pages, J. Wiley, New York (1999). ISBN 0—471—19749—1. UK £ 58.50

UNDERSTANDING OUR ENVIRONMENT, 3^rd, edition, edited by R.M. Harrison, 445 pages, The Royal Society of Chemistry, Cambridge (UK) (1999). ISBN 0—85404—584—8. UK£ 19.95

ENDOCRINE DISRUPTING CHEMICALS, Vol. 12 of Issues in Environmental Science and Technology, edited by R.E. Hester and R.H. Harrison, 152 pages, Royal Society of Chemistry, Cambridge (U.K.) (1999). ISBN 0—85404—255—5. UK£ 25,00

METHOD PERFORMANCE STUDIES FOR SPECIATION ANALYSIS. by P. Quevauviller, 271 pages, The Royal Society of Chemistry, Cambridge (U.K.) (1998). ISBN 0—85404—467—1. UK£ 59.50

GLOBAL AQUATIC AND ATMOSPHERIC ENVIRONMENT, by H.D. Kumar and D.P. Häder, 393 pages, Springer, Berlin (1999). ISBN 3—540—65369—4. USD 229.00

BIOACCUMULATION. New Aspects and Developments, edited by B. Beek, 284 pages, Springer, Heidelberg, 2000. ISBN 3—540—62575. USD 143.00

INTERLABORATORY STUDIES AND CERTIFIED REFERENCE MATERIALS FOR ENVIRONMENTAL ANALYSIS. The BCR approach, by Ph. Quevauviller and E.A. Maier, 558 pages, Elsevier Science, Amsterdam NL, (1999). ISBN 0—444—82389—1. USD 251.50 (Euro 224.62).     

Environmentally Friendly Techniques and Their Comparison in the Extraction of Natural Antioxidants from Green Tea,Rosemary, Clove,and Oregano

Many current food and health trends demand the use of more ecological, sustainable, and environmentally friendly techniques for the extraction of bioactive compounds, including antioxidants. However, extraction yields and final antioxidant activities vary between sources and are highly influenced by the given extraction method and nature and ratio of the employed solvent, especially for total polyphenols, flavonoids, and anthocyanins, which are well recognized as natural antioxidants with food applications. This review focused on the most common extraction techniques and potential antioxidant activity in the food industry for various natural antioxidant sources, such as green tea, rosemary, clove, and oregano. Green extraction techniques have been proven to be far more efficient, environmentally friendly, and economical. In general, these techniques include the use of microwaves, ultrasound, high hydrostatic pressure, pulsed electric fields, enzymes, and deep eutectic solvents, among others. These extraction methods are described here, including their advantages, disadvantages, and applications.     

Dynamics of phase separation and critical phenomena in polymer mixtures

The phenomenological mean-field theory for statics and dynamics of polymer mixtures is described, generalizing the approaches of Flory-Huggins, Cahn-Hilliard and de Gennes. Predictions are made for critical behavior, spinodal decomposition and homogeneous nucleation. The validity of the mean-field approximations is discussed with Ginzburg criteria. The results of the theory are compared to computer simulations and recent experiments.Invited talk delivered at the Tagung der Deutschen Physikalischen Gesellschaft, Fachausschu\ Polymerphysik, Kaiserslautern, 12–14 March 1986, and at the Gordon Research Conference on Polymer Physics, Andover, New Hampshire, 14–18 July 1986.The author is grateful to Dieter W. Heermann, Alla Sariban, Harry L. Frisch, Josef JÄckie and Thomas Schichtel for their fruitful collaboration on this research described in this review. He thanks them and Arthur BaumgÄrtner for allowing to present partially unpublished material, and for stimulating discussions. Furthermore the author has benefitted from discussions with P. G. de Gennes, P. Pincus, H. Sillescu and G. R. Strobl. This research is supported in part by the Deutsche Forschungsgemeinschaft, Sonderforschungsbereich 41.     

石墨烯纤维：制备、性能与应用

石墨烯纤维是一种由石墨烯片层紧密有序排列而成的一维宏观组装材料。通过合理的结构设计和可控制备,石墨烯纤维能够将石墨烯在微观尺度的优异性能有效传递至宏观尺度,展现出优异的力学、电学、热学等性能,从而应用于功能织物、传感、能源等领域。目前,石墨烯纤维主要通过湿法纺丝、限域水热组装等方法制备得到,其性能可以通过对材料体系和制备工艺的优化而进一步提升。本文首先介绍了石墨烯纤维的制备方法,然后详细阐述了石墨烯纤维的性能,讨论了其性能提升策略,并总结了石墨烯纤维的应用,最后对石墨烯纤维的未来发展、挑战和前景进行了展望。     

致癌性多环芳烃萘、蒽、芘的分析方法比较

利用薄层色谱（TLC）、紫外光谱（UV）、反相高效液相色谱（RPHPLC）对多环芳烃（PAHs）萘、蒽、芘的分析方法进行了研究。TLC中使用环己烷：氯仿（5：4,V／V）作为展开剂时,三者的R,值分别为0．78、0．65和0．72;用UV法在溶液中测定了三者的最大吸收波长分别为303、380、338nm;当流动相为甲醇：水（9：1,V／V）时三者在RP—HPLC中的保留时间为4．179、5．190、6．178min,5次重复RSD分别为1．1％、1．8％、0．91％,并用于实际水样中萘、蒽、芘的分析。     

石墨烯基二氧化碳电化学还原催化剂的研究进展

利用电催化技术将CO₂转化为小分子燃料或高值化学品是实现原子经济、构建人工碳循环的绿色能源技术之一。电催化还原CO₂ (ECR)的反应条件温和、产物多样(C₁、C₂和C₂₊),有极大的发展潜力。然而,ECR技术面临一些需要解决的挑战性问题,包括电极过电势高、C₂及C₂₊产物选择性低、伴随析氢反应等。解决这些问题的关键在于创制低成本、高性能电催化剂。近年来,石墨烯基电催化剂的研究成为ECR领域的热点之一,原因包括：1)在电化学环境中稳定性好;2)表面原子、电子结构可调,进而实现材料催化活性的调控;3)维度可调,易暴露较大的比表面积和形成层次孔结构;4)耦合石墨烯的高导电性与特定材料的高活性,可协同提升ECR催化性能。本文评述了石墨烯基材料在ECR中的研究进展,详述了石墨烯基电催化剂的构筑方法,探讨并梳理了石墨烯的点/线缺陷、表面官能团、掺杂原子构型、金属单原子种类、材料表界面性质等与ECR性能之间的本征构效关系。最后展望了石墨烯基催化剂在ECR领域中的挑战和未来发展。     

MORPHOLOGY EVOLUTION IN PTFE AS A FUNCTION OF MELT TIME AND TEMPERATURE Ⅱ. LOW MOLECULAR WEIGHT FOLDED CHAIN SINGLE CRYSTALS AND BAND STRUCTURES

The effect of sintering dispersed and bulk, low molecular weight (Mn = 50,000 Da), nano-emulsion polytetrafluoroethylene (PTFE) particles near their melting point is described. With the nascent particles consisting of ca.75 nm diameter, hexagonal, single crystals, sintering at, e.g., 350℃, results, initially, in merger of neighboring particles,followed by individual molecular motion on the substrate and the formation of folded chain, lamellar single crystals and spherulites, and on-edge ribbons. It is suggested these structures develop, with time, in the mesomorphic "melt". Sintering of the bulk resin yields extended chain, band structures, as well as folded chain lamellae; end-surface to end-surface merger,possibly by end-to-end polymerization, occurs with increasing time.     

甘油催化氢解制备精细化学品的研究进展

随着生物柴油产业的快速发展,作为副产物的甘油大量过剩,因而有效利用甘油既能促进生物柴油产业的良性发展,又能节约大量石油资源。通过甘油催化氢解的方式来制备高附加值化学品丙二醇、乙二醇和丙醇等是甘油转化研究中最有潜在应用价值的路径之一,甘油氢解反应易于实现连续化生产,且目标产物附加值高、选择性高,因而具有良好的经济效益。本文首先简要介绍了甘油化学,深入探讨了甘油的氢解机理,然后重点综述了甘油氢解制备1, 2-丙二醇、1, 3-丙二醇、乙二醇和丙醇高效催化剂的研究进展,并对甘油氢解未来的研究方向和发展趋势作了进一步展望。     

液体弹珠：制备策略、物理性质及应用探索

Liquid marbles (LMs) are liquid droplets coated with a layer of lyophobic particles at the air-liquid interface. Since the pioneering work by Aussillous et al. in 2001, LMs have attracted significant attention owing to their facile fabrication, flexibility in the choice of the constituent particles and liquids, intriguing properties such as non-wetting and non-adhesive nature, satisfactory elasticity and stability, as well as promising applications in microfluidics, sensors, controlled release, and microreactors. The classical strategy for the preparation of LMs involves rolling a small volume of a droplet on a lyophobic powder bed for complete encapsulation of the liquid by the particles. In addition, various innovative methods, including electrostatic and coalescent approaches, have been developed for preparing special LMs with a complicated structure or morphology. Diverse materials such as water, surfactant solutions, liquid metals, reagents, blood, and even viscous adhesives have been employed as the internal liquid for the fabrication of LMs. Theoretically, any particulates such as lycopodium, polytetrafluoroethylene, Fe₃O₄, SiO₂, and graphite grains can be employed as the outer coating, but they are usually required to be lyophobic with sizes of less than hundreds of microns. The unique structure of the particle-covered droplet and the dual solid-liquid characteristics endow LMs with some unique and interesting properties, especially the non-wetting and non-adhesive nature. As the lyophobic coating particles restrain the internal liquid from contacting the substrate, LMs can move easily across either solid or liquid surfaces, neither wetting the substrate nor contaminating the internal liquid. An equally fascinating property of LMs is their satisfactory stability, which is necessary for most of their applications. The high stability of LMs stems from the protection of the coating powders and is embodied in both good mechanical stability (remaining intact after being released from a certain height or under a certain compression) and long lifetime (greatly suppressing the evaporation of the internal liquid). These extraordinary properties make LMs promising candidates for use in multitudinous fields, especially droplet microfluidics and microreactors. The potential application of LMs in microfluidics is ascribed to their non-wetting, non-adhesive nature and other features such as an ability to float on a liquid surface, coalescence, split, a small force of rolling friction, and response to external forces. Notably, LMs hold great promise for applications in microreactions, because they can create a confined reaction microenvironment, minimize reagent usage, facilitate unhindered gas exchange between the internal liquid medium and the surrounding environment, and allow the entry/exit of the reactants/products. We herein review the recent advances in LMs, such as manufacturing techniques, formation mechanisms, physical properties, and emerging applications. In particular, much attention is paid to the factors affecting the stability of LMs and the potential strategies to increase their stability. Moreover, this review discusses the challenges in the future development of LMs, suggests several possible ways of addressing these challenges, and forecasts the future development directions. We believe that this review can help researchers gain a better understanding of LMs and promote their further advances.     

ICP–AES法测定稀土硅铁球化剂和孕育剂中钙、镁、铝、锰、镧、铈

建立了电感耦合等离子体原子发射光谱法(ICP–AES)测定稀土硅铁球化剂和孕育剂中Ca,Mg,Al,Mn,La,Ce等元素含量的方法。通过基体匹配消除了铁基体的干扰,Ca,Mg,Al,Mn,La,Ce的分析谱线分别为317.933,279.553,394.401,257.610,333.749,456.236 nm。各元素标准曲线的线性相关系数均在0.999以上,检出限在0.000 1%~0.000 4%之间。方法的加标回收率为99.4%~102.8%,测定结果的相对标准偏差均小于3%(n=11)。用该方法测定标准样品,测定结果与认证值相吻合。该法适用于稀土硅铁球化剂和孕育剂中钙、镁、铝、锰、镧、铈的测定。