不同掺杂浓度Yb3+:YAl3 (BO3)4晶体光谱研究

采用顶部籽晶法生长了不同浓度Yb3+:YAl3(BO3)4(Yb:YAB)晶体,X射线粉末衍射(XRD)结果表明晶体的结构与YAB相同.研究了室温下不同掺杂浓度Yb:YAB晶体的偏振吸收光谱,以及块状的偏振荧光谱和粉末的非偏振荧光光谱,通过对不同浓度掺杂Yb:YAB晶体粉末的非偏振荧光谱的分析,实验结果表明:随着Yb3+离子掺杂浓度的增加,辐射陷阱效应对荧光谱的影响越来越严重;因此,提出了Yb:YAB晶体中荧光谱的重心波长移动与Yb3+离子掺杂浓度之间的经验关系来定量分析Yb3+离子掺杂浓度变化对辐射陷阱的影响.并且比较了不同浓度Yb:YAB晶体的光谱参数.结果表明高浓度Yb:YAB晶体是一种潜在的微片和自倍频激光材料.     

Y2O2S∶Er3+，Yb3+的制备及Er3+离子在晶场中的能级分裂

采用沉淀法制备前驱体,通过不同温度合成了上转换发光材料Y2O2S∶Er3+,Yb3+,运用XRD,SEM和上转换发射光谱对其进行表征。结果表明,所合成的Y2O2S∶Er3+Yb3+属于六方晶系晶体,随着合成温度的升高,产物的粒径不断增大,上转换发射光强度逐渐增加。研究Y2O2S∶Er3+Yb3+的上转换发光过程,红光发射和绿光发射分别源于Er3+离子的4F9/2→4I15/2以及2H11/2→4I15/2,4S3/2→4I15/2能级跃迁。利用群论计算了晶场中Er3+离子的能级分裂数目。     

静电纺丝技术制备Y_2O_3∶Yb~(3+),Er~(3+)上转换纳米纤维及其表征

采用静电纺丝技术制备了PVA/[Y(NO3)3+Yb(NO3)3+Er(NO3)3]复合纳米纤维,将其在适当的温度下进行热处理,得到Y2O3∶Yb3+,Er3+上转换纳米纤维.XRD分析表明,复合纳米纤维为无定形,Y2O3∶Yb3+,Er3+上转换纳米纤维属于体心立方晶系,空间群为Ia3.SEM分析表明,复合纳米纤维的平均直径约为150nm;随着焙烧温度的升高,纤维直径逐渐减小.经过600℃焙烧后,获得了直径约60nm的Y2O3∶Yb3+,Er3+上转换纳米纤维.TG-DTA分析表明,当焙烧温度高于600℃时,复合纳米纤维中水分、有机物和硝酸盐分解挥发完毕,样品不再失重,总失重率为83%.FTIR分析表明,复合纳米纤维与纯PVA的红外光谱一致,当焙烧温度高于600℃时,生成了Y2O3∶Yb3+,Er3+上转换纳米纤维.该纤维在980nm的半导体激光器激发下发射出中心波长为521,562nm的绿色和656nm的红色上转换荧光,分别对应于Er3+离子的2H11/2/4S3/2→4Il5/2跃迁和4F9/2→4Il5/2跃迁.对Y2O3∶Yb3+,Er3+上转换纳米纤维的形成机理进行了讨论.     

LD泵浦的镱铒共掺磷酸盐玻璃的光谱性质和激光性质

制备了Er3+/Yb3+共掺磷酸盐玻璃。通过分析其吸收光谱,根据McCumber理论计算得到了Er3+离子在波长1533 nm处的峰值发射截面为0.84×10-20cm2,4I13/2能级的荧光寿命为8.5 ms。利用激光二极管作为泵浦源,成功地实现了Er3+/Yb3+共掺磷酸盐玻璃激光器的连续运转。在室温下,获得最大激光输出功率为80 mW,斜率效率为16.5%。     

GdF3∶Er^3＋,Yb^3＋的合成和上转换发光特性

采用水热法制备了Er^3＋离子浓度为3%,Yb^3＋离子浓度分别为10%,20%的GdF3∶Er^3＋,Yb^3＋。XRD结果表明：合成的样品均为正交结构的GdF3,Gd0.87Yb0.10Er0.03F3和Gd0.77Yb0.20Er0.03F3样品的晶粒尺寸分别为28和26nm。研究了980nm红外光激发的上转换发射光谱。结果表明：红光和绿光发射分别来自于Er^3＋离子的2H11/2,4S3/2→4I15/2和4F9/2→4I15/2跃迁。样品的绿光发射强度较红光发射强。但绿光和红光发射的相对强度比例与Yb^3＋离子浓度有关。对Gd0.87Yb0.10Er0.03F3和Gd0.77Yb0.20Er0.03F3样品中可能的上转换发光机制进行了讨论。     

Na(Y1.5Na0.5)F6:Yb3+/Er3+纳米棒的制备及其上转换发光特性

采用水热合成法,使用油酸作为乳化剂制备了Yb3+/Er3+共掺杂六角相Na(Y1.5Na0.5)F6纳米棒。通过X射线衍射(XRD)、扫描电子显微镜(SEM)以及荧光光谱等测试手段对所制备的样品进行表征。测试结果表明,Na(Y1.5Na0.5)F6纳米晶的晶格常数为a=b=0.600 nm,c=0.352 nm。在980 nm红外光激发下,Yb3+/Er3+共掺杂Na(Y1.5Na0.5)F6纳米棒发出从红光到近紫外的上转换荧光,其中红光、绿光和近紫外光分别对应于Er3+离子4F9/2→4I15/2,(2H11/2,4S3/2)→4I15/2和(2G11/2/2H9/2)→4I15/2的能级跃迁。详细讨论和分析了各荧光波段的上转换发射过程。     

Yb:Er:Tm:LiTaO3的上转换发白光性能研究

980 nm脉冲激光激发下,首次通过高温固相法制备Yb(10%):Er(1%):Tm(1%):LiTaO3(摩尔分数)多晶粉并实现室温上转换白光.X射线粉末衍射测试结果表明,Yb:Er:Tm:LiTaO3中的掺杂离子并没有改变晶格结构,以取代的方式存在于钽酸锂晶格中.结合功率曲线测试结果和上转换机制研究发现,产生上转换蓝光的Tm3+离子1G4态的布居主要来自双光子同时吸收过程.而单光子上转换输出的红光,则由Tm3+和Er3+离子之间的交叉弛豫过程产生,即3F2/3(Tm3+)+4I15/2(Er3+)→3H6(Tm3+)+4I9/2(Er3+).上转换绿光来源于Yb/Er离子对的二次能量传递.     

Er3+/Yb3+共掺纳米In2O3的制备及上转换发光

用低温溶剂热法以乙二醇为溶剂合成了Er3+和Yb3+共掺的In2O3纳米晶。用X射线衍射(XRD)、透射电镜(TEM)、漫反射光谱和上转换发光光谱对样品进行了分析。XRD和TEM结果表明,产物为纯的立方相In2O3结构,粒径约为30 nm;漫反射光谱显示了In2O3∶Er3+,Yb3+纳米晶在522、653和975 nm附近有3个吸收带;在980 nm近红外光激发下,样品发射出中心波长为525及555 nm的绿光和662 nm的红光,分别对应于Er3+的2H11/2→4I15/2、4S3/2→4I15/2和4F9/2→4I15/2跃迁;研究了Er3+和Yb3+离子的不同掺杂浓度对发光强度的影响,确定了Yb3+和Er3+离子的最佳掺杂浓度均为3%;双对数曲线显示绿光和红光的发射过程均为双光子吸收过程,对样品的上转换发光机制进行了初步讨论。     

Er3+, Yb3+:Y2O3激光陶瓷粉体制备与性能研究

以Y2O3,Yb2O3和Er2O3为原料,控制溶液的pH值为3-4左右,采用柠檬酸溶胶-凝胶法制备出Er,Yb∶Y2O3倍半氧化物激光陶瓷前驱粉体。对所得到的粉体进行XRD测试,结果表明最佳煅烧温度为1000℃,并且晶化完全。经过差热-热重分析表明,粉体在1000℃煅烧后不再失重。荧光光谱分析发现,荧光发射的最强峰位于1530 nm处,是Er^3＋的4^I13/2-4^I15/2谱相导致的荧光发射。     

Er^3＋：Y0.5Gd0.5VO4晶体的生长和光谱性质

用液相法合成GdVO4和YVO4多晶原料，提拉法生长出具有高光学质量的Er^3＋：Y0.5Gd0.5VO4混晶。用ICP法分析了晶体中Er^3＋离子的浓度。用x射线粉末衍射法对晶体的晶胞参数进行了测量，分别测量了1．62％（原子分数）Er^3＋：Y0.5Gd0.5VO4晶体的偏振吸收光谱、荧光发射光谱和荧光寿命谱；光谱显示该晶体在382，454，525，656，804，985，1536nm有很强的偏振光吸收峰，且π偏振光（E∥C）吸收远强于σ偏振光（E⊥C）吸收；同时通过偏振吸收光谱，计算了晶体吸收峰的半高宽度和吸收截面；与Er^3＋：YVO4，Er^3＋：GdVO4晶体吸收峰的半高宽度和吸收截面进行了比较。其荧光发射（^4I13/2-^4I15/2跃迁）峰值波长在1．5μm，荧光寿命为4．7ms；光谱特性表明Er^3＋：Y0.5Gd0.5VO4晶体是潜在的高效率激光晶体材料。     

Dy3+在Ba3La(BO3)3 中的光致发光

研究了Ba3La(BO3)3 基质中Dy3 的光致发光特性; 探讨了RE3 的电荷半径比(z/r)和Ce3 , Dy3 含量对Dy3 发光强度及发光颜色的影响; 分析了Ba3La(BO3)3 中Ce3 对Dy3 发光的敏化作用; 确定了Dy3 的 4F9/2→6H15/2及4F9/2→6H13/2跃迁发射的浓度猝灭机制均为电偶极-电四极相互作用.     

3-Trifluoromethyl- and 3-difluoromethyl-thalidomides

Syntheses of racemic 3-trifluoromethyl- and 3-difluoromethyl-thalidomide starting from 2-(tert-butyloxycarbonylimino)-3,3,3-trifluoropropionate or -3,3-difluoropropionate as fluorine-containing building blocks are described.     

KMgF3:Ce3+,Tb3+纳米粒子中Ce3+→Tb3+的发光及能量传递

利用微乳液方法,合成了铈、铽共掺杂的氟镁钾纳米粒子,研究了体系中Ce3+→Tb3+的发光特性以及它们之间的相互作用,结果表明KMgF3:Ce3+Tb3+纳米粒子中存在Ce3+→Tb3+的能量传递过程,即Ce3+可以将吸收的能量直接传递给Tb3+离子,使得Tb3+的绿色发光强度大为增加.     

GdF3∶Er3+，Yb3+的合成和上转换发光特性

采用水热法制备了Er3 离子浓度为3%,yb3 离子浓度分别为10%,20%的GdF3:Er3 ,Yb3 .XRD结果表明:合成的样品均为正交结构的GdF3,Cd0.87Yb0.10Er0.03F3和Gd0.77Yb0.20Er0.03F3样品的晶粒尺寸分别为28和26 nm.研究了980 nm红外光激发的上转换发射光谱.结果表明:红光和绿光发射分别来自于Er3 离子的2H11/2,4S3/2→4I15/2和4F9/2→4I15/2跃迁.样品的绿光发射强度较红光发射强.但绿光和红光发射的相对强度比例与Yb3 离子浓度有关.对Gd0.87Yb0.10Er0.03F3和Gd0.77Yb0.20Er0.03F3样品中可能的上转换发光机制进行了讨论.     

白光LED用荧光材料Ba3 Gd( BO3 )3:Eu3+的发光性能研究

用高温固相反应法制备了稀土离子Eu3+ 掺杂的三元稀土硼酸盐Ba3Gd(BO3)3发光材料, 通过X射线衍射 (XRD) 、荧光光谱和扫描电镜 (SEM) 等测试手段对Ba3Gd(BO3)3:Eu3+ 荧光粉的制备条件、发光性能以及形貌进行了研究. XRD结果表明, 在1000 ℃时可得到Ba3Gd(BO3)3 纯相. 扫描电镜照片显示颗粒基本为球形, 粒径约为200～400 nm. 发光光谱测试表明, Ba3Gd(BO3)3:Eu3+荧光粉在近紫外区(UV) (396 nm)和蓝光区(466 nm)可以被有效地激发, 分别用255和396 nm的紫外光激发样品时, 以Eu3+ 的 5D0-7F2 (611和616 nm) 超灵敏跃迁为主要发射峰. 当Eu3+的掺杂浓度为10%(摩尔分数)时, Ba3Gd(BO3)3:Eu3+ 在611和616 nm处的发光强度最大. 因此, 这种荧光粉是一种可能应用在白光LED上的红色荧光材料.     

Die Perthioborate RbBS3, TIBS3 und TI3B3S10

The Perthioborates RbBS₃, TIBS₃, and Tl₃B₃S₁₀ . RbBS₃ (P2₁/c, a=7.082(2) Å, b=11.863(4) Å, c=5.794(2) Å, β=106.54(2)°) was prepared as colourless, plate-shaped crystals by reaction of stoichiometric amounts of rubidium sulfide, boron, and sulfur at 600°C and subsequent annealing. TlBS₃ (P2₁/c, a=6.874(3) Å, b=11.739(3) Å, c=5.775(2) Å, β=113.08(2)°) which is isotypic with RbBS₃ was synthesized from a sample of the composition Tl₂S · 2 B₂S₃. The glassy product which was obtained after 7 h at 850°C was annealed in a two zone furnace for 400 h at 400→350°C. Yellow crystals of TlBS₃ formed at the warmer side of the furnace. Tl₃B₃S₁₀ (P1 , a=6.828(2) Å, b=7.713(2) Å, c=13.769(5) Å, α=104.32(2)°, β=94.03(3)°, γ=94.69(2)°) was prepared as yellow plates from stoichiometric amounts of thallium sulfide, boron, and sulfur at 850°C and subsequent annealing. All compounds contain tetrahedrally coordinated boron. The crystal structures consist of polymeric anion chains. In the case of RbBS₃ and TlBS₃ nonplanar five-membered B₂S₃ rings are spirocyclically connected via the boron atoms. To obtain the anionic structure of Tl₃B₃S₁₀ every third B₂S₃ ring of the polymeric chains of MBS₃ is to be substituted by a six-membered B(S₂)₂B ring.     

Electrochemical oxidation of 3-imidazoline 3-oxides

Cyclic voltammetry was used to study the electrochemical oxidation of substituted 3-imidazoline 3-oxides. It was determined that the oxidation potentials (E _p/2) of the compounds depend on the nature of the substituents in the 1 and 4 positions of the ring. A correlation analysis ofE _p/2 of the the compounds and _I and _R of the substituent constants in the 4 position of the ring was carried out. The obtained results show that oxidation of 3-imidazoline 3-oxides can occur at the nitrone or amine fragment, depending on the nature of the substituent in the 1 position of the ring.Institute of Organic Chemistry, Russian Academy of Sciences, 630090 Novosibirsk. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 11, pp. 2545–2550, November, 1992.     

Photoluminescent Property Effect of Sc3+ on Er3+/y3+/yb3+ Doped Al2O3 Powders

The photoluminescence (PL) property effect of Sc3+ on the Er3+/Y3+/Yb3+ doped Al2O3 powders prepared by sol-gel method has been investigated. The X-ray diffraction (XRD) and transmission electron microscopy (TEM) implied that the distribution of dopants (Er3+ , Y3+ , Yb3+ , Sc3+) was improved effectively with the rise of Sc3+ concentration. The Fourier transform infrared spectra (FTIR) results demonstrated that the ligand around the quenching center -OH and the population of -OH were altered by introducing different amounts of Sc3+ . The PL intensity centered at 1530 nm was increasingly improved with the rise of Sc3+ concentration, as well as the corresponding full widths at the half maximum (FWHM) and lifetime. The optimized PL intensity was 4.7 times higher than that non-Sc3+ doped sample for the Al2O3 powders codoped with 10mol% Sc3+ . This material can be promising candidates for optical fiber amplifier.     

3-Acylaminopyrazole derivatives via a regioselectively N-protected 3-nitropyrazole

A simple procedure for the selective protection of the endocyclic 1-N of 3-aminopyrazoles as tert-butoxycarbamate (Boc) in good yield is described. A 3-nitropyrazole derivative represents the key intermediate with the nitro substituent determining the regiochemistry of the obtained protected compound. Subsequent acylation at the exocyclic amino group gave rise, after Boc removal, to a series of 3-acylaminopyrazoles in high yields and purities.     

Etude du Systeme LiPO3-Pr(PO3)3 Donnees sur LiPr(PO3)4

The LiPO₃-Pr(PO₃)₃ system was studied by micro-differential thermal analysis. The only new compound observed in the system was LiPr(PO₃)₄, melting incongruently at 1246 K. An eutectic appears at 926 K. Crystallographic data and powder diagram of the new compound are given. LiPr(PO₃)₄ crystallizes in the C2/c monoclinic system with unit cell: a=16.428(6), b=7.054(3), c=9.747(4) Å, β=126°31′(3), V=910.2 ų, Z=4. The IR and Raman spectra of this compound are given. This revised version was published online in July 2006 with corrections to the Cover Date.