自组装ITO/双层磷脂膜的制备及其光电行为研究

在ITO(Indium-tin-oxide)导电玻璃电极上制备上自组装双层磷脂膜和经C60修饰的双层磷脂膜,研究了这种自组装双层磷脂膜的光电行为,考察了偏压、溶液中的给体和受体的浓度对自组装膜光电流强度的影响,讨论了C60分子对光电子跨膜传递过程的促进作用。     

PAMAM树枝形分子与KALP肽相互作用的计算机模拟研究

采用粗粒化的分子动力学模拟研究了跨膜多肽,lysine-flanked peptide(KALP),对第四代聚酰胺-胺(PAMAM)树枝形分子形态结构的影响.考虑了中性和酸性两种不同pH环境下两个分子间的相互作用行为.计算了PAMAM分子的回转半径、非球形因子、相对于树枝形分子质心的径向密度分布函数,和两分子间的平均力势.模拟发现在两种pH环境下KALP多肽对树枝形分子的大小、形状及密度分布影响不大,证实了PAMAM树枝形分子内部有一定空间容纳KALP多肽分子.自由能的计算结果表明酸性pH环境中PAMAM分子排斥KALP肽,无法形成复合结构;在中性pH环境中,两种分子也不容易形成稳定的复合结构.     

盐浓度及磷脂分子结构对多组分带电膜弯曲刚性的影响

磷脂膜弯曲刚性模量很难直接测量, 本实验用循环冻融法制备尺寸大小与膜弯曲刚性相关的熵稳定单层囊泡. 粒度仪测量发现, 囊泡尺寸随盐浓度增加呈现先剧烈减小然后缓慢增加的分段变化规律. 但当组分中含有头部带电同时尾链带有不饱和键的二油酰磷脂酰甘油酯时, 囊泡尺寸却在较大的盐浓度范围内不出现回升. 囊泡膜的负Zeta-电势绝对值均表现为先急剧减小然后趋于平稳的变化规律, 数值大小只与带电组分的含量有关. 而对直接水合法制备的多层囊泡的统计发现, 囊泡尺寸随盐浓度增加急剧减小, 随后趋于稳定值, 均不随分子组合变化而回升. 结果表明在不同的盐浓度范围里, 主导磷脂膜弯曲刚性模量的因素不同. 低盐浓度的体系, 静电屏蔽效应为主导因素; 高盐浓度的体系, 膜双电层中反离子的分布起主导作用. 磷脂分子头部与尾部的不同结构组合会影响膜双电层, 使膜的弯曲刚性不同. 多层囊泡体系中, 高盐浓度下膜的热涨落掩盖了分子结构及双电层分布差异对膜弯曲刚性的影响.     

树形大分子基药物传输系统结合强度及构型的分子动力学研究

采用全原子分子动力学方法系统研究了聚酰胺(PAMAM)型树形大分子非共价搭载4种抗癌药物分子(CE6,DOX,MTX及SN38)的药物传输复合体系.考察了药物分子种类、数量及树形大分子的代数和聚乙二醇化表面修饰对复合体系的结合强度、尺寸及溶剂中扩散行为的影响.研究发现,PAMAM自身变形能对药物-PAMAM间的结合有重要影响.搭载较多的药物分子可以使PAMAM自身增大,但同样搭载条件下经过聚乙二醇化修饰过的PAMAM变化并不明显.PAMAM分子表面的聚乙二醇化可以更高的强度结合更多的药物分子,并减缓其扩散速度,因而提高药物分子的搭载效率和体内滞留时间.为新型树形大分子基药物传输体系的设计提供理论依据.     

平板双分子层脂膜的制备及锌离子跨该膜的输运过程

制备了氧化胆固醇 卵磷脂(脑磷脂)平板双分子层脂膜,研究了膜配方对双分子层脂膜的稳定性和离子通透性的影响,得到了最佳制膜工艺,建立了锌离子跨卵 (脑 )磷脂膜的吸附 -扩散模型,其计算值与实验值基本吻合.     

磷脂膜的相行为对氧化石墨烯与磷脂膜相互作用的影响

通过使用不同相变温度的磷脂分子并调节二者的比例构筑了不同相态的磷脂膜, 并利用表面增强红外光谱和激光共聚焦显微镜研究了磷脂膜的相行为对氧化石墨烯和磷脂膜相互作用的影响. 结果表明, 氧化石墨烯对磷脂膜中磷脂分子的抽提作用具有显著的相态选择性, 其选择性地抽提流动相的磷脂分子; 氧化石墨烯对流动相磷脂的抽提作用受到膜中凝胶相磷脂存在比例的影响, 只有在流动相磷脂分子占磷脂膜中磷脂分子的绝大部分时才能够发生抽提作用, 且只有流动相的磷脂分子被抽提.     

树枝状大分子的自组装超薄膜

树枝状化合物因具有三维立体结构、均一的分布和多而密且可修饰性强的外官能团,使之作为结构单元进行自组装形成具有特色的超薄膜。Regen等利用整代聚酰胺－胺型（PAMAM）树状分子的胺端基,将其沉积到用Pt^2 离子活化的表面,重复这一过程即得到多层膜。Crook等首先报道了以共价键结合的树状分子膜,这种膜是将PAMAM树状分子的胺端基与巯基十一烷酸组成的单层膜作用生成酰胺键而形成的。Tsukruk等将表面分别带正负电荷的PAMAM树状分子在硅表面进行层状沉积形成超薄膜。研究显示,以树状分子为结构单元经自组装形成的膜具有潜在的用途前景,如作为化学探感器、多相催化剂、滤光片或光学器件基材等。     

外端为偶氮苯基团的聚酰胺-胺树枝状分子对光和H~+的响应行为

合成了1到5代外端修饰有偶氮苯基团的聚酰胺-胺(PAMAM)树枝状分子.H-NMR、FTIR和元素分析等表明得到了目标产物,外端接枝率在70%~90%.结构分析表明经修饰的PAMAM分子在3代和4代之间存在一个结构转变.UV-Vis和H-NMR分析结构显示,在中性条件下,Gn-azo表现出类似于小分子偶氮苯基团的光响应行为.而在酸性条件下,偶氮苯基团的顺反异构转化率较质子化前低.包裹及释放实验表明,虽然G4-azo包裹水杨酸分子的能力弱于G4PAMAM,但它对于客体小分子具有缓释作用,光照使偶氮苯基团发生由反式到顺式的异构转化之后,缓释效应更明显.     

环糊精修饰聚酰胺-胺树状高分子的合成及其与乳酸左氧氟沙星的作用研究

合成了一系列以环糊精修饰的树状高分子化合物PAMAM(G2,G4)-β-CD,用IR,1H-NMR等手段表征了其结构,并采用荧光光谱法对其在缓冲溶液中与乳酸左氧氟沙星(LFL)的相互作用进行了研究.结果表明,经环糊精修饰树状高分子的增敏率远大于未修饰的和天然环糊精,且随代数和环糊精含量的增加而增大,表明其具有强于相同代数PAMAM的分子键合能力,这些强的键合能力源于环糊精修饰树状高分子化合物中两种结构单元的疏水作用、静电作用和氢键作用的协同效应.     

树枝状高分子修饰的水溶性近红外二区荧光聚合物的合成及其在肿瘤相关抗原载运中的应用

通过在具有供体-受体-供体结构的近红外二区(NIR-Ⅱ)荧光分子(TTQ-F)的侧链上修饰聚酰胺-胺型树枝状高分子(PAMAM)合成了一种NIR-Ⅱ荧光高分子(TTQ-F-PAMAM).该树枝状修饰的高分子不仅可以实现在900～1200nm近红外二区范围的荧光成像,同时有着良好的光稳定性.PAMAM作为一种三维、高度有...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.