聚酰胺-胺树形大分子吸附分离材料的构筑及应用研究进展

聚酰胺-胺(PAMAM)树形大分子具有高度支化的分子结构和丰富的叔胺、酰胺和氨基等功能基团,且各功能基团随树形大分子代数增加呈规律性增加和排布,为吸附位点的集中、层次性分布提供了理想的模板。同时,PAMAM树形大分子具有良好的水溶性、稳定性和pH响应性,可通过调控树形大分子的代数、中心核、外层端基以及溶液pH等提升其对不同水体环境的适应性及对目标物的选择性吸附分离性能,因此,以PAMAM树形大分子构筑吸附分离材料在金属离子、染料、生物分子和药物分子以及CO2的吸附分离领域具有重要应用。本文对PAMAM树形大分子吸附分离材料的构筑及应用研究进展进行了全面总结,并展望了该类材料未来的应用前景和发展方向。     

Cu2+对树状大分子PAMAM-FCD荧光性能的影响

以小分子2-芴醛(FCD)修饰树状大分子聚酰胺-氨PAMAM, 合成了1~3代树状大分子PAMAM-FCD, 用IR, 1H NMR和MALDI-TOF-MS等手段表征了化合物结构, 研究了Cu2+浓度对其荧光及紫外性能的影响. 结果表明, Cu2+可使其荧光强度和紫外吸收不同程度地增强. 在紫外光谱中, Cu2+自身的吸收峰消失, 表明Cu2+参与配位. PAMAM-FCD有望成为蓝光区荧光材料及树状大分子-铜杂化材料.     

树状大分子PAMAM(1G)-FCD的合成及荧光性能

合成了外围由小分子2-芴醛修饰的树状大分子PAMAM(1G)-FCD, 用IR, 1H NMR, MALDI-TOF-MS等手段表征了其结构, 并对其荧光性能及Sn2+对该性能的影响进行了研究, 结果表明, Sn2+能使化合物荧光显著增强. 紫外光谱表明, 随着PAMAM(1G)-FCD溶液中Sn2+浓度的增加, 体系在360 nm处出现了新的吸收峰, 表明二者之间存在化学反应. 故该树状分子有望作为难得的蓝光区荧光材料及金属-树状大分子杂化材料.     

(聚酰胺-胺)树状大分子对甲氨蝶呤的复合和释放研究

以甲氨蝶呤(MTX)为模型药物,研究了PAMAM与MTX的复合及体外释放.1H-,13C-NMR数据表明MTX与PAMAM树状大分子形成复合物是由于MTX羧基和PAMAM树状大分子外端氨基之间的相互作用.该复合物在pH=7.4,10 mmol/L Tris-HCl中非常稳定,表现出明显的缓释效果.当溶液中的离子强度增加时,会破坏PAMAM-MTX复合物的稳定性,缓释作用部分或全部失去,说明PAMAM树状大分子与MTX之间的相互作用属于静电作用.UV测得每个G5.0 PAMAM、G4.0 PAMAM树状大分子分别能复合271、4个MTX分子.     

高分子模板对CdS量子点制备及其光催化性能的影响

分别以球形聚酰胺-胺(PAMAM)树形分子和线形聚乙烯吡咯烷酮(PVP)两种结构不同的高分子为模板, 原位制备了分散良好的CdS量子点(CdS QDs), 并以甲基橙为降解对象, 研究了高分子模板结构对CdS量子点的制备和光催化性能的影响. 结果表明, 以PAMAM 树形分子为模板制备的CdS量子点(CdS QDs/PAMAM)比以PVP为模板制备的CdS量子点(CdS QDs/PVP)的尺寸分布更窄, 激子吸收峰更明显, 光致发光(PL)强度更高|并且在量子点尺寸接近的情况下, CdS QDs/PAMAM的催化效率明显高于CdS QDs/PVP. 这是由于PAMAM树形分子独特的结构有利于生成尺寸均匀的CdS量子点, 且不易钝化量子点表面的活性位点|而线性的PVP分子量分布较宽, 使制备的量子点的尺寸分布较宽, 且PVP分子链缠绕在CdS量子点表面, 钝化了部分活性位点, 降低催化效率. 此外, CdS QDs/PAMAM的催化能力随粒径减小而增大.     

荧光性聚酰胺-胺树形分子在潜指纹显现中的应用研究

本文系统研究了不同条件(树形分子代数、浓度、浸泡时间等)下荧光性聚酰胺-胺树形分子(PAMAM)水溶液作为荧光探针对锡纸、透明胶带等基底上油印潜指纹的显现效果.结果发现PAMAM树形分子可以和指纹残留物进行靶向结合.结合到指纹纹线上的该荧光性纳米材料在暗室中365 nm紫外光的激发下发出明亮的蓝色荧光,指印纹线与基底反差大、指纹易于辨认,且操作简单,试剂完全环保无污染.这些结果表明PAMAM水溶液是一种潜在的优良的指纹显现试剂.最后,把PAMAM树形分子水溶液对指纹的显现效果进行量化处理,乳突纹与基底间的灰度对比度达到90%以上.     

聚酰胺-胺树形分子荧光性能研究及其在指纹识别领域应用初探

研究了不同温度、浓度、pH值条件下,不同代数、不同端基类型(酯端基和胺端基)的PAMAM(聚酰胺-胺)树形分子的强荧光发射性能.PAMAM树形分子发射强荧光是沿树形结构方向的酰胺基团中的n→π^*跃迁和其密实的球状结构共同作用的结果.树形分子的荧光强度在低pH值或者低温条件下大幅度提高,并且在稀溶液中与浓度成线性关系,在高浓度或者高代数条件下逐渐偏离线性关系.本文还对上述规律的内在机理进行了研究:第一,低pH值条件下,PAMAM树形分子内的叔胺基被氢离子质子化,酰胺荧光发射中心和叔胺基团之间的光诱导电子转移作用被抑制,甚至中断,因此荧光强度急剧升高;第二,随着温度升高,PAMAM树形分子的去活作用增强,荧光强度降低;第三,浓度超过临界点浓度后,由于浓度消光作用,PAMAM树形分子的荧光强度不再随浓度增加而线性增强.最后,将PAMAM树形分子水溶液用于锡纸上油印潜指纹的识别,经处理后的指纹在365 nm紫外光的激发下发射出蓝色荧光,潜指纹被成功地清晰识别.     

聚酰胺-胺树形大分子的合成与应用

聚酰胺_胺 (PAMAM)树形大分子是一种从中心核开始增长 ,具有确定代数和末端基的新型合成高分子。由于该化合物具有高度的几何对称性、大量的端基、分子内存在空腔等结构特点 ,在催化、医药、生命科学、工业等领域具有广泛的应用前景。本文通过介绍PAMAM树形大分子的合成、表征方法及其性能研究 ,讨论了其改性研究和应用。     

两亲性树枝状大分子作为药物缓释载体的研究

利用胆酸对1代聚酰胺-胺树枝状大分子进行修饰,得到两亲性树枝状大分子(PAMAM1-CA6)。采用1H-NMR和酸碱滴定法测得每个1代PAMAM分子上共价键连了6个胆酸分子。PAMAM1-CA6在水相中自组装成纳米粒子,粒径约为273nm。以抗癌药物氨甲喋呤为模型考察了此两亲性树枝状大分子对药物的缓释行为。在碱性条件下(pH=10),PAMAM1-CA6对氨甲喋呤的释放较为缓慢;随着溶液pH的降低,药物的释放速率明显加快。说明PAMAM1-CA6对氨甲喋呤的释放具有环境响应性。体外细胞实验的结果表明,PAMAM1-CA6能够显著地提高氨甲喋呤的疗效。因此,这类由低代树枝状大分子制得的材料有望成为新型的药物控释载体。     

不同代PAMAM树状大分子与牛血清白蛋白的相互作用研究

采用发散法合成了以乙二胺为核的聚酰胺-胺型(PAMAM)树状大分子,并应用荧光光谱法研究了生理条件下(pH=7.4)3.0代(G3.0)、3.5代(G3.5)和4.0代(G4.0)PAMAM树状大分子与牛血清白蛋白(BSA)的相互作用.结果表明,三种PAMAM树状大分子都能引起牛血清白蛋白荧光猝灭,其程度主要取决于各自末端基团的性质,猝灭机制属于静态猝灭.G4.0PAMAM,G3.5PAMAM和G3.0PAMAM与BSA的猝灭常数分别为2.73,1.69,1.55L·mmol-1.同时考察了体系pH值及离子强度的变化对PAMAM与BSA相互作用的影响.此外,同步荧光和紫外光谱法(UV)以及红边激发荧光位移(REES)等方法的研究结果表明,PAMAM树状大分子的存在改变了BSA的构象.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.