离子自组装方法在偶氮光响应材料制备中的应用

偶氮光响应材料在光信息存储,光学器件制造等领域具有广阔的应用前景。离子自组装技术是近几年发展起来的制备超分子功能材料的一种新方法。本文首先对偶氮光响应材料的制备方法以及离子自组装技术的基本原理做了简单的介绍。然后分4类对离子自组装方法在偶氮光响应材料制备中的应用进行了综述,主要包括带电荷小分子染料与反电荷表面活性剂组装、聚电解质与反电荷偶氮小分子组装、高支化大分子与偶氮小分子组装以及环糊精与含偶氮聚电解质组装。最后对该领域的发展趋势和研究热点进行了展望。     

两性高分子与小分子及大分子的相互作用（下）

2 两性高分子与染料及表面活性剂的相互作用文献中对阳离子聚电解质、阴离子聚电解质及非离子性高分子与染料、去污剂、表面活性剂等小分子物质的相互作用有较多报道,而有关两性高分子与这些小分子物质相互作用的报道极少。本节就合成两性高分子与染料等小分     

酚醛型重氮树脂复合物及自组装超薄膜的制备与应用

不同的高分子链之间可通过次价键而聚集,形成高分子复合物(polymer-polymer omplex).其中,研究最为深入的是基于库仑力的聚电解质复合物(polyelectrolyer complex,PEC)近年来一种继L-B膜技术之后,被称为"层-层”自组装(1ayer-by-layer self-assembly)的技术受到了越来越多的关注自组装技术所组装的分子大多是聚电解质,通常是将带不同电荷的聚电解质分子在水溶剂中交替地组装到片基上,实际上就是在固液界面一层一层地形成聚电解质复合物通过其它弱相互作用如氢键、电荷转移等高分子的自组装基本类似.因此可以说,对高分子自组装的研究基本上是对高分子复合物研究的延伸本论文对重氮树脂-酚醛树脂的感光性复合物以及基于重氮树脂的"层-层”自组装多层膜进行了研究,主要结果如下: 2001年6月通过博士论文答辩     

一种含有偶氮磺酸基与吡啶基的高分子氢键自组装及自组装超薄膜

静电自组装是指将带相反电荷的聚电解质，于水溶液中交替沉积在片基上，制备多层超薄膜的技术．由于它在水溶液进行，技术简单，无需专用设备，再加上静电力比范德华力强，因此静电自组装膜比传统的LB(Langmuir—Blodget)膜稳定，在近年来得到很大发展．现在自组装成膜驱动力已从最初的静电力扩展到氢键、电荷转移相互作用、疏水相互作用等；用于组装的组分也从聚电解质扩展到多官能团小分子、胶体粒子、无机纳米     

侧链型偶氮聚电解质自组装和膜结构研究

研究了4种侧链型偶氮聚电解质的自组装过程及其对自组装膜结构的影响.用聚电解质上的偶氮基团作为“探针”,研究了自组装过程中出现的生色团取向、解吸附和非线性增长等现象.这些侧链型偶氮聚电解质均具有较好的自组装性,但其自组装行为有很大差异.在不同的pH条件下,聚电解质的电离程度不同,导致吸附过程和自组装膜结构亦明显不同.自组装膜的增长和结构取决于体系中吸附和解吸的平衡.偶氮生色团端基的亲水或疏水性对自组装膜的增长有明显的影响.偶氮聚电解质自组装过程不同阶段出现的非线性增长现象,分别反映了基底、溶液性质和聚电解质结构等因素的影响.     

聚电解质层层自组装纳滤膜*

层层自组装技术能够方便地对膜的微观结构和组成进行调控,已在制备复合型纳滤膜方面取得了迅速的发展。本文综述了近年来用于聚电解质层层自组装纳滤膜的制备方法,种类以及影响因素。介绍了静态层层交替沉积、压力驱动自组装和电场强化自组装等三种制备方法;归纳了均聚型、共聚型和有机/无机杂化型等三类用于层层自组装纳滤膜的聚电解质的特点;讨论了聚电解质的荷电性、电荷密度和电离程度等因素对其自组装膜分离性能的影响。总结了聚电解质自组装纳滤膜在水处理和有机溶剂中物质的分离等方面的应用。同时,对提高聚电解质自组装纳滤膜的组装效率,分离性能和发展方向提出了设想和建议。     

层层自组装聚电解质多层膜的制备及在膜分离中的应用

扼要论述了聚电解质自组装膜制备过程中电荷密度、驱动力及增长方式等对膜厚和膜结构影响的基本规律，着重介绍了近年来聚电解质自组装渗透气化膜和离子分离膜研究概况。对聚电解质自组装分离膜今后的研究工作提出了建议。     

羧基负离子型聚电解质与重氮树脂的自组装及自组装膜的光和热反应

带相反电荷的聚电解质的自组装,由于方法简单,对环境无污染,近年来备受重视［１～８］。以重氮树脂为聚正离子的聚电解质复合物,由于光照时重氮基分解,致使复合物的离子键转为共价键,溶解性发生重大改变,从而以重氮树脂为聚正离子的聚电解质复合物是一种新的光成像体系［９,１０］。张希等用重氮树脂与聚苯乙烯磺酸钠成功地制备了对极性溶剂稳定的自组装超薄膜［１１］。本文用羧基负离子聚电解质与重氮树脂进行自组装,并研究该自组装膜的光,热反应。羧基负离子聚电解质与重氮树脂的自组装超薄膜,文献上报道较少。１　聚丙烯酸钠…     

多孔聚电解质功能材料研究进展

多孔聚电解质材料协同结合了静电与高比表面积双重特点,在能源、环境、生物医药等领域具有重要的应用前景,近年来发展迅速。由于其荷电性与亲水性,多孔聚电解质的制备方法与传统中性多孔高分子有所不同,也表现出独特的应用属性。本文概括总结了层层组装、聚电解质嵌段聚合物自组装、反离子交换、劣溶剂静电络合等制备多孔聚电解质材料的方法,介绍了多孔聚电解质在绿色环境、清洁能源、生物医药和催化剂等领域的应用,并简单展望了未来的研究机遇。     

两种侧链偶氮聚电解质自组装膜中生色团取向研究

用偏振紫外光谱研究了两种侧链偶氮聚电解质静电逐层自组装膜中偶氮生色团的初始取向 .讨论了不同的组装条件对自组装膜中偶氮生色团取向的影响 .进一步探讨了偶氮聚电解质自组装膜的结构特点 .研究表明 ,侧链偶氮聚电解质自组装膜中的偶氮生色团存在一定程度的面内取向 ,自组装的各种影响条件和聚合物结构等 (pH值、侧链柔性间隔基团长度、以及偶氮生色团官能度等 )与自组装膜中偶氮生色团的面内取向程度存在一定的相关性 .通过研究偶氮生色团的取向和影响因素 ,可以深入认识侧链偶氮聚电解质的自组装行为     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.