ZIF-67改性木质素磺酸钠/聚乙烯亚胺层层自组装膜的纳滤性能研究

基于木质素磺酸钠/聚乙烯亚胺纳滤膜的可行性,制备了ZIF-67改性的木质素磺酸钠/聚乙烯亚胺复合纳滤膜。通过层层自组装技术在聚砜基膜上沉积了ZIF-67改性的聚电解质阴/阳离子层,以不同的料液Mg SO_4、CaCl_2和NaCl为分离体系来探究ZIF-67改性木质素磺酸钠/聚乙烯亚胺复合膜的分离性能,发现本研究制备的ZIF-67改性木质素磺酸钠/聚乙烯亚胺复合膜在不降低截留率的前提下,渗透通量较木质素磺酸钠/聚乙烯亚胺纳滤膜可提高到约原来的两倍。本文运用层层自组装技术制备的ZIF-67改性的新型纳滤膜,可应用于水软化领域且简便可行。     

银/聚电解质复合纳滤膜的制备及表征

利用层层自组装技术(LbL),采用原位还原方法在聚醚砜(PES)基膜上制备了银/聚电解质复合纳滤膜.SEM分析表明:膜表面结构致密,Ag粒子在复合膜中分布均匀,粒径100～200 nm,UV-vis图谱证明膜中粒子为Ag粒子,所得银/聚电解质纳滤膜呈现出优异的抗菌性能.[PSS/PDADMAC]3[PAS/PAH-Ag]3PSS膜对负二价离子显示出较高的截留性能,达到93%.     

聚电解质PDDA/PSS层层自组装膜的渗透汽化性能

采用聚电解质层层自组装(LbL)技术, 在不同盐浓度下制备了聚(二烯丙基二甲基氯化铵)/聚苯乙烯磺酸钠(PDDA/PSS) 多层自组装膜, 并用于渗透汽化性能的研究. 重点考察了组装溶液中NaCl的浓度、组装层数及操作温度对自组装膜的异丙醇脱水性能的影响. 同时, 用扫描电镜观测了不同条件下制备膜的表面形貌. 结果表明, 在高NaCl含量的聚电解质溶液中只需组装几个双层的LbL膜, 即能获得较高的分离因子和较大的通量, 并解释了该LbL膜呈现反“trade-off”现象的原因.     

层层自组装聚电解质多层膜的制备及在膜分离中的应用

扼要论述了聚电解质自组装膜制备过程中电荷密度、驱动力及增长方式等对膜厚和膜结构影响的基本规律,着重介绍了近年来聚电解质自组装渗透气化膜和离子分离膜研究概况。对聚电解质自组装分离膜今后的研究工作提出了建议。     

层层自组装聚电解质多层膜的制备及在膜分离中的应用

扼要论述了聚电解质自组装膜制备过程中电荷密度、驱动力及增长方式等对膜厚和膜结构影响的基本规律，着重介绍了近年来聚电解质自组装渗透气化膜和离子分离膜研究概况。对聚电解质自组装分离膜今后的研究工作提出了建议。     

层层自组装聚电解质多层膜的制备及在膜分离中的应用

扼要论述了聚电解质自组装膜制备过程中电荷密度、驱动力及增长方式等对膜厚和膜结构影响的基本规律,着重介绍了近年来聚电解质自组装渗透气化膜和离子分离膜研究概况.对聚电解质自组装分离膜今后的研究工作提出了建议.     

智能响应与自修复的层层组装聚合物膜

具有刺激响应性和自修复功能的复合膜是重要的仿生功能膜材料.层层组装是一种基于物质交替沉积而制备复合膜的方法,可以实现膜的结构和组成的精确调控.通过结构与组成的精确调控,基于层层组装制备的微米厚度的聚电解质厚膜可以对外界刺激产生快速有效的响应,因而在制备智能仿生膜材料方面具有重要的价值.本文以作者的研究结果为基础,阐明了基于层层组装的聚电解质膜可以成功用于制备湿度和温度响应的双结构自支持膜和高效的促动器及行走机器,以及自修复超疏水和划痕修复聚电解质膜.     

纳滤膜的研究进展

纳滤膜是一种新型分离膜,其截流分子量介于反渗透膜和超滤膜之间,且对无机盐有一定的截流率。国内外纳滤膜制备方法有L-S相转化法、复合法、荷电化法和无机改性等。纳滤膜研究中存在着膜通量小、膜制作成本较高及抗污染性差等问题,因此选择和制备纳滤膜的材料,优化纳滤技术水处理工艺设计,提高纳滤性能,降低制膜成本,减轻膜污染等已成为当今科学研究的重要课题。     

层层自组装聚电解质膜光纤传感器的制备和应用

在过去几十年中,光纤的应用已经渗透到多个学科领域。光纤的抗电磁干扰、可远程监控、多重监测、体积小及质量轻等特点,使其在传感器研究领域备受关注。聚电解质层层自组装膜构建的光纤传感器自2000年诞生以来,已快速发展成为传感器领域新的研究热点。该类光纤传感器在微量物质的监测方面具有广泛的应用前景。本文从光纤和光纤传感器优点出发,总结了基于层层自组装多层膜的光纤传感器种类、性能、检测原理以及相应的光纤结构和自组装材料;进而结合作者已做的相关工作,论述了在光纤基底上的聚电解质层层自组装及基于自组装膜的光纤传感器的测试;重点综述了近十年层层自组装膜的光纤pH传感器、湿度传感器、气体传感器、生物传感器及其他类型的光纤传感器的制备与应用,并展望了今后聚电解质层层自组装多层膜光纤传感器的发展。     

解读纳滤:一种具有纳米尺度效应的分子分离操作

纳滤膜是20世纪80年代末期发展起来的一种广泛用于液体分离的新型分离膜。早期研究中,先后提出的基于筛分效应的细孔模型,基于静电效应的电荷模型,以及同时考虑上述两种效应的静电位阻模型和道南位阻模型等为人们更好地理解纳滤膜分离机理和指导纳滤膜过程应用发挥了十分重要的作用。然而由于这些具有“疏松型反渗透膜”特点的纳滤膜没有相应的膜性能预测评价软件,使得针对具体应用过程的纳滤膜的大规模标准化应用受到了一定的制约。为此,结合上述模型,根据一些特定实验拟合确定混合盐体系同号离子间的竞争作用和异号离子间的调节作用,提出了一个适于混合盐体系的纳滤膜分离性能评价模型,促进了纳滤膜技术在水处理过程的大规模推广。最近,根据纳滤膜对离子选择性分离性能及其伴随的动电性质的细致而深入的实验研究,发现仅考虑筛分效应和静电效应并不能完全合理地解释纳滤膜的分离性能,且在动电性质的解析上也存在一定缺陷,进而对纳滤膜纳米级孔径引起的特殊效应和溶液体系中复杂相互作用引起的荷电性质变化有了更为深刻的认识和理解,提出并定量分析了离子透过纳滤膜时存在的介电排斥效应。     

Fabrication of novel layer-by-layer assembly films composed of poly(lactic acid) and polylysine through cation-dipole interactions

Novel layer-by-layer (LbL) assembly films composed of poly( L-lysine) (PLL) and poly( D-lactic acid) (PDLA) were prepared by the alternate immersion of a gold substrate into an aqueous PLL solution and an acetonitrile solution of PDLA. The formation of the LbL assembly film was confirmed by quartz crystal microbalance (QCM) analysis, atomic force microscopy observation, and attenuated total reflection Fourier transform infrared spectroscopy measurement. The driving force responsible for the LbL assembly was determined by investigating the formation behavior of the LbL assembly under various conditions. The formation of the LbL assembly was not affected either by the stereochemistry of polylysine and poly(lactic acid) or by the addition of urea, which is known to inhibit hydrogen bonding interaction between polymers, into the aqueous PLL solution. The LbL assembly was also formed by the combination of PDLA and polycations other than polylysine, such as poly(diallyldimethylammonium chloride). On the other hand, the combination of PDLA and any polyanions such as poly(styrene sulfonate sodium salt) produced little corresponding LbL assembly. The increase in positive charge on the amino nitrogen atom of PLL enhanced the LbL assembly. These results suggest that the LbL assembly film composed of PLL and PDLA was fabricated by cation-dipole interactions between the positive charge on the amino nitrogen atom of PLL and the lone pairs of the carbonyl oxygen atom of PDLA.     

Layer-by-layer assembly for rapid fabrication of thick polymeric films

In the past two decades, layer-by-layer (LbL) assembly has been proven to be a convenient and versatile method to fabricate functional films. However, using traditional dipping LbL assembly to fabricate micrometer-thick films is time consuming. Compared with ultrathin films, micrometer-thick films prepared by LbL assembly possess enhanced mechanical stability, and allow deposition of a significantly increased amount of materials and the integration of multiple functions. These merits of thick films produced by LbL assembly can result in new functions and allow the functions of ultrathin films fabricated by LbL assembly to be optimized. In this tutorial review, the methods for rapid fabrication of thick polymeric films involving LbL assembly are reviewed. The functions of such films that are relevant to their micrometer thickness are discussed.     

Smoothing of Fast Assembled Layer-by-layer Films by Adjusting Assembly Conditions

To prepare layer-by-layer(LbL) multilayers in time-efficient manners by the dipping method is highly appealing. However, the fast LbL assembly produces multilayers with high surface roughness. In our attempt to smooth the surface morphologies of LbL multilayers obtained by fast assembly(5 s dipping), we studied the influence of the assembly conditions on the surface morphologies. The study shows that by properly adjusting the assembly conditions, such as washing duration, water annealing period, and drying with nitrogen flow, LbL multilayers with enhanced surface smoothness could be obtained through fast LbL assembly.     

聚合物复合物层层组装膜

层层组装是一种基于物质交替沉积而制备复合膜的方法,可以实现膜的结构和组成的精确调控.聚合物复合物是基于各种分子间弱相互作用力而形成的超分子聚集体,其种类包括聚阳离子-聚阴离子复合物、聚电解质-有机小分子复合物、中性聚合物-聚合物复合物以及聚合物-无机杂化复合物等.在本文中,以作者的研究结果为基础,阐明聚合物复合物的层层组装是一种方便、快捷的功能复合膜的构筑方法,具有如下优点:(1)聚合物复合物大的尺度可以实现聚合物复合物层层组装膜的快速构筑;(2)聚合物复合物的结构在组装溶液中和成膜后都容易调控,方便聚合物复合物层层组装膜结构的精细调控.(3)聚合物复合物层层组装膜可以构筑非复合的聚合物层层组装所不能获得的膜结构及功能.     

Fabrication of novel multilayered thin films based on inclusion complex formation between amylose derivatives and guest polymers

Novel types of layer-by-layer (LbL) assembly films were successfully fabricated onto a solid substrate through the inclusion complex formation between partially 2,3- O-methylated amyloses (MAs) and polytetrahydrofuran (PTHF). The formation of the LbL assembly films was confirmed by quartz crystal microbalance (QCM) analysis, atomic force microscopy (AFM) observation, and X-ray diffraction (XRD) measurement. The film formation was significantly affected by the methylation degree of amylose. When MAs with 8 and 20% methylation were used as hosts, the formation of LbL assembly films with PTHF was clearly observed. On the other hand, MAs with more than 33% methylation barely formed LbL assembly films with PTHF.     

聚合物层状组装膜

介绍了近几年来我们研究组在层状组装膜的构筑以及功能化研究方面取得的一些最新进展.包括结合表面溶胶-凝胶技术与静电层状组装技术,实现了二阶非线性基团在层状组装多层膜中的非对称排列,制备了具有二阶非线性效应的膜材料;采用室温压印技术,发展了一种简便、经济和具有普适性的层状组装聚合物膜图案化方法;以轻度交联的聚合物微凝胶为构筑基元,制备了具有高负载量的聚合物层状组装膜;发展了一种基于离子剥离技术的层状组装自支持膜制备方法;基于层状组装技术,制备了具有超疏水和抗反射功能的涂层.     

表面印迹交替层状组装薄膜

在简要概述非常规交替层状组装这一进展后,重点总结了如何利用非常规交替层状组装以实现表面印迹膜的制备.模板分子与聚电解质在溶液中组装形成超分子复合物,然后以此超分子复合物为构筑基元,与感光性高分子,如重氮树脂,通过常规交替层状组装形成聚合物多层膜.利用聚合物多层膜之间的光化学反应形成稳定的多层膜,然后去除模板分子得到分子...     

Layer‐by‐Layer Assembly: Recent Progress from Layered Assemblies to Layered Nanoarchitectonics

As an emerging concept for the development of new materials with nanoscale features, nanoarchitectonics has received significant recent attention. Among the various approaches that have been developed in this area, the fixed‐direction construction of functional materials, such as layered fabrication, offers a helpful starting point to demonstrate the huge potential of nanoarchitectonics. In particular, the combination of nanoarchitectonics with layer‐by‐layer (LbL) assembly and a large degree of freedom in component availability and technical applicability would offer significant benefits to the fabrication of functional materials. In this Minireview, recent progress in LbL assembly is briefly summarized. After introducing the basics of LbL assembly, recent advances in LbL research are discussed, categorized according to physical, chemical, and biological innovations, along with the fabrication of hierarchical structures. Examples of LbL assemblies with graphene oxide are also described to demonstrate the broad applicability of LbL assembly, even with a fixed material.     

Tunable morphologies of polymer capsules templated from cuprous oxide particles for control over cell association

Over the past two decades,layer-by-layer(LbL) assembly of micro/nanocapsules has been of interest for the investigation of bio-nano interactions to explore bio-applications,such as drug delivery.The choice of an appropriate template that can be easily dissolved under mild conditions is one of the challenges for the assembly of LbL capsules.Herein,we report the engineering of LbL capsules with tunable morphologies using cuprous oxide(Cu_2O) particles as templates.Cu_2O particles with cubic,tetradecahedral or spherical morphologies were synthesized via hydrothermal processes,which can be dissolved under mild condition(e.g.,sodium thiosulfate solution).The influence of capsule morphologies on cell association was investigated,which indicates that LbL capsules with cubic geometry promoted cell association up to 4 and 9-fold than tetradecahedral and spherical capsules,respectively.The reported method provides a new avenue for the assembly of LbL capsules with different morphologies,which has the potential for better understanding of biological interactions of LbL capsules.     

pH-controlled exponential and linear growing modes of layer-by-layer assemblies of star polyelectrolytes

We report the unique layer-by-layer (LbL) assembly behavior of pH-sensitive star-shaped polyelectrolytes with both linear and exponential growth modes controlled by star architecture and assembly conditions. Cationic poly[2-(dimethylamino)ethyl methacrylate] and anionic poly(acrylic acid) stars were synthesized via "core-first" atom-transfer radical polymerization (ATRP) based on multifunctional initiators, in addition to their linear analogues. We demonstrated the LbL growth behavior as a function of deposition pH (ranging from 5 to 7), number of layers (up to 30 bilayers), and the method of assembly (dip- vs spin-assisted LbL). The spin-assisted LbL assembly makes it possible to render smoother and thinner LbL films with parameters controlled by the shear rate and pH conditions. In contrast, for dip-assisted LbL assembly, the pH-dependent exponential growth was observed for both linear and star polyelectrolytes. In the case of linear/linear pair, the exponential buildup was accompanied with a notable surface segregation which resulted in dramatic surface nonuniformity, "wormlike" heterogeneous morphology, and dramatic surface roughening. In contrast, star/linear and star/star LbL films showed very uniform and smooth surface morphology (roughness below 2.0 nm on the scale of 10 μm × 10 μm) with much larger thickness reaching up to 1.0 μm for 30 bilayers and rich optical interference effects. Star polyelectrolytes with partially screened charges and high mobility caused by compact branched architecture appear to facilitate fast diffusion and exponential buildup of LbL films. We suggest that the fast buildup prevents long-range lateral diffusion of polyelectrolyte star components, hinders large-scale microphase separation, and thus leads to unique thick, smooth, uniform, transparent, and colorful LbL films from star polyelectrolytes in contrast to mostly heterogeneous films from traditional linear counterparts.