Controlled growth of well-aligned ZnO nanorod array using a novel solution method

A simple method of synthesizing nanomaterials and the ability to control the size and position of them are crucial for fabricating nanodevices. In this work, we developed a novel ammonia aqueous solution method for growing well-aligned ZnO nanorod arrays on a silicon substrate. For ZnO nanorod growth, a thin zinc metal seed layer was deposited on a silicon substrate by thermal evaporation. Uniform ZnO nanorods were grown on the zinc-coated silicon substrate in aqueous solution containing zinc nitrate and ammonia water. The growth temperature was as low as 60-90 degrees C and a 4-in. wafer size scale up was possible. The morphology of a zinc metal seed layer, pH, growth temperature, and concentration of zinc salt in aqueous solution were important parameters to determine growth characteristics such as average diameters and lengths of ZnO nanorods. We could demonstrate the discrete controlled growth of ZnO nanorods using sequential, tailored growth steps. By combining our novel solution method and general photolithography, we selectively grew ZnO nanorod arrays on a patterned silicon substrate. Our concepts on controlled ZnO nanorod growth using a simple solution method would be applicable for various nanodevice fabrications.     

Synthesis and Characterization of ZnO Nanowires

Zinc oxide is a wide bandgap (3.37 eV) semiconductor with a hexagonal wurtzite crystal structure. ZnO prepared in nanowire form may be used as a nanosized ultraviolet light-emitting source. In this study, ZnO nanowires were prepared by vapor-phase transport of Zn vapor onto gold-coated silicon substrates in a tube furnace heated to 900 ?C. Gold serves as a catalyst to capture Zn vapor during nanowire growth. Size control of ZnO nanowires has been achieved by varying the gold film thickness…     

Effects of substrates and seed layers on solution growing ZnO nanorods

Oriented ZnO nanorods were fabricated in a two-step approach, including the synthesis of seed layer on different substrates and the growth of ZnO nanorods in aqueous solutions of zinc nitrate and hexamethylenetetramine at low temperature. The effects of seed layer synthesized by different methods, sol–gel method and electrochemical deposition method, on the orientation and morphologies of ZnO nanorods were compared in detail. The optimal parameters for the growth of highly oriented ZnO nanorod arrays were found and the forming mechanism was also disclosed. Furthermore, as an application of the ZnO nanorod film, dye-sensitized solar cells based on it were successfully fabricated. The cell performances of ZnO nanorods grown on ED-ZnO seed layer deposited at −700 mV were higher than those with SG-ZnO seed layer due to good nanostructure.     

取向Zn1-xMgxO纳米线阵列的制备及光学特性

采用化学气相沉积(CVD)法, 以高纯ZnO、Mg和活性C混合粉末为原料, 在Si(111)衬底上制备了不同配比的取向Zn1-xMgxO纳米线阵列. 用X射线衍射仪(XRD), 扫描电镜(SEM), 能量色散X射线分析(EDAX)及光致发光(PL)光谱分析仪对样品的晶体结构、形貌、成分组成和光致发光特性进行了分析. 用霍尔效应测量系统测试了不同配比样品的载流子浓度. 实验发现, 当Zn1-xMgxO纳米线阵列中Mg原子相对Zn原子摩尔比x值较小时(x<0.29), XRD衍射谱中只有ZnO晶体标准衍射峰, 没有MgO晶体衍射峰, 说明此时制备的Zn1-xMgxO纳米线样品晶格结构以ZnO纤锌矿结构为主, Mg原子只是作为替位或填隙原子分布在ZnO晶体中. 但当样品中x>0.53时, ZnO与MgO的特征衍射峰同时出现在样品的衍射谱图中, 说明随原料中Mg原子摩尔比的增加, 制备的Zn1-xMgxO纳米阵列样品中ZnO纤锌矿结构与MgO岩盐结构同时存在, 样品呈现多晶体结构形式. 实验还对比了制备的纯ZnO与不同配比的Zn1-xMgxO纳米线阵列的光致发光光谱和载流子浓度, 发现随Mg含量的增加, Zn1-xMgxO阵列紫光发光峰出现了较明显的蓝移现象, 同时, 测试结果也表明, 随Mg含量的增加, Zn1-xMgxO阵列的紫光和绿光峰发光强度都有所减弱, 样品的载流子浓度也随之下降. 文章对实验结果进行了分析和探讨.     

Low-temperature growth of ZnO nanorods by chemical bath deposition

Aligned ZnO nanorod arrays were synthesized using a chemical bath deposition method at normal atmospheric pressure without any metal catalyst. A simple two-step process was developed for growing ZnO nanorods on a PET substrate at 90-95 degrees C. The ZnO seed precursor was prepared by a sol-gel reaction. ZnO nanorod arrays were fabricated on ZnO-seed-coated substrate. The ZnO seeds were indispensable for the aligned growth of ZnO nanorods. The ZnO nanorods had a length of 400-500 nm and a diameter of 25-50 nm. HR-TEM and XRD analysis confirmed that the ZnO nanorod is a single crystal with a wurtzite structure and its growth direction is [0001] (the c-axis). Photoluminescence measurements of ZnO nanorods revealed an intense ultraviolet peak at 378.3 nm (3.27 eV) at room temperature.     

采用高分子自组装ZnO纳米线及其形成机理

介绍了一种能在各种晶面的硅衬底上制备垂直于衬底取向生长的ZnO纳米线阵列的新方法. 该法采用高分子络合和低温氧化烧结反应, 以聚乙烯醇(PVA)高分子材料作为自组装络合载体来控制晶体成核和生长. 首先通过PVA侧链上均匀分布的极性基团羟基(—OH)与锌盐溶液中的Zn²⁺离子发生络合作用, 然后滴加氨水调节络合溶液pH值为8.5±0.1, 使络离子Zn²⁺转变为Zn(OH)₂, 再将硅片浸入此溶液中, 从而在硅衬底表面得到较均匀的Zn(OH)₂纳米点, 随后在125 ℃左右Zn(OH)₂纳米点通过热分解转化为ZnO纳米点, 其后在420 ℃烧结过程中衬底上的ZnO纳米点在PVA高分子网络骨架对其直径的限域下逐渐取向生长成ZnO纳米线, 并且烧结初期PVA碳化形成的碳通过碳热还原ZnO为Zn, 再在氧气氛中氧化为ZnO的方式在纳米线顶端形成了催化活性点, 促进了纳米线顶端ZnO的吸收. 烧结后碳逐渐氧化被完全去除. 采用场发射扫描电镜(FE-SEM)、透射电镜(TEM, HR-TEM)和X射线衍射(XRD)对纳米线的分析结果表明, ZnO纳米线在硅衬底上分布均匀, 具有六方纤锌矿结构, 并且大多沿[0001]方向择优取向生长, 直径为20～80 nm, 长度可从0.5至几微米. 提出了聚合物控制ZnO结晶和形貌的网络骨架限域模型以解释纳米线的生长行为.     

Large-scale fabrication of tower-like, flower-like, and tube-like ZnO arrays by a simple chemical solution route

Large-scale arrayed ZnO crystals with a series of novel morphologies, including tower-like, flower-like, and tube-like samples, have been successfully fabricated by a simple aqueous solution route. The morphology and orientation of the obtained ZnO crystal arrays can be conveniently tailored by changing the reactants and experimental conditions. For example, the tower-like ZnO crystal arrays were obtained in a reaction solution system including zinc salt, ammonia, ammonium salt, and thiourea, and the orientation of these tower-like crystals could be controlled by the contents of these reactants. Flower-like ZnO arrays were obtained at lower temperatures, and tube-like ZnO arrays were obtained by ultrasonic pretreatment of the reaction system. The growth mechanism of the tower-like and tube-like ZnO crystals was investigated by FESEM. The results show that tower-like crystals grow layer by layer, while tube-like crystals grow from active nanowires. Ultrasonic pretreatment is proved to be effective in promoting the formation of active nuclei, which have important effects on the formation of the tube-like ZnO crystals. In addition, large-scale arrays of these ZnO crystals can be successfully synthesized onto various substrates such as amorphous glass, crystalline quartz, and PET. This implies this chemical method has a wide application in the fabrication of nano-/microscale devices.     

Sn掺杂ZnO纳米针的结构及其生长机制(英文)

利用包括磁控溅射和热氧化的两步法在Si(111)衬底上制备了Sn掺杂ZnO纳米针.首先用磁控溅射法在Si(111)衬底上制备Sn:Zn薄膜,然后在650℃的Ar气氛中对薄膜进行热氧化,制备出Sn掺杂ZnO纳米针.样品的结构、成分和光学性质采用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、高分辨透射电子显微镜(HRTEM)、能量散射X射线(EDX)谱和光致发光(PL)光谱等技术手段进行分析.结果表明,制备的样品为具有六方纤锌矿结构的单晶Sn掺杂ZnO纳米针,Sn掺杂量为2.5%(x,原子比),底部和头部直径分别为200-500 nm和40 nm,长度为1-3μm,结晶质量较高.室温光致发光光谱显示紫外发光峰比纯ZnO的发光峰稍有蓝移,这可归因于能谱分析中探测到的Sn的影响.基于本实验的实际条件,简单探讨了Sn掺杂ZnO纳米针的生长机制.     

电沉积种子层化学控制生长氧化锌纳米棒和纳米管

采用水溶液法在电沉积的ZnO种子层上制备了高度取向的ZnO纳米棒阵列,并通过碱溶液化学腐蚀法获得了ZnO纳米管。对ZnO纳米棒和纳米管的溶液生长和腐蚀过程进行了分析。结果表明,种子层的结构和性能对ZnO纳米棒有着重要的影响,在-700 mV电位下沉积的种子层薄膜均匀性好,生长的纳米棒密度大、与基底垂直性好;碱溶液对纳米棒的腐蚀具有选择性,通过控制腐蚀液的浓度和时间,可获得中空的ZnO纳米管。     

Enhanced nucleation, growth rate, and dopant incorporation in ZnO nanowires

Pure and Co-doped ZnO nanowire arrays were grown on polished silicon substrates with high rates via an electrochemical technique. A negative potential applied to the substrate not only enhances the nucleation density on polished substrates more than 4 orders of magnitude but also increases the growth rate by 35 times over that obtained in the absence of the potential. Furthermore, incorporation of metallic dopants in ZnO nanowires was demonstrated in the low-temperature process. This fast growth technique provides a route to fabrication of low-cost highly oriented ZnO nanowires on polished substrate for industrial applications.     

Zn基片上ZnO及ZnS/ZnO复合纳米阵列的液相合成及发光性质

采用温和的溶液路线在Zn基片上合成了单晶态的ZnO纳米棒阵列、 纳米片阵列和ZnS/ZnO复合双层纳米棒阵列. 使用X射线粉末衍射仪、 扫描电子显微镜、 高分辨透射电子显微镜、 X射线光电子能谱仪等对产物的组成、 结构及形貌进行了表征. 讨论了表面活性剂在液相合成中对产物形貌的调控作用. 通过室温发射光谱的测定, 研究了所得纳米阵列材料的发光性质.     

高度取向ZnO单晶亚微米棒阵列的制备与表征

通过低温压热的方法,在经过预先处理长满晶核的SnO2导电玻璃基底上制备出具有高度取向的ZnO亚微米棒阵列.用扫描电子显微镜(SEM)、选区电子衍射(SAED)及X射线粉末衍射(XRD),对制备出的ZnO亚微米棒的结构和形貌进行了表征.SEM测试结果表明,ZnO亚微米棒是六方型的,近乎垂直地长在基底上,棒的直径为400～500 nm,长度约为2 μm. SAED和XRD结果表明,ZnO亚微米棒为单晶,属于六方晶系,并且沿[001]方向择优取向生长.     

Chemical bath deposition of ZnO nanowires at near-neutral pH conditions without hexamethylenetetramine (HMTA): understanding the role of HMTA in ZnO nanowire growth

Chemical bath deposition (CBD) is an inexpensive and reproducible method for depositing ZnO nanowire arrays over large areas. The aqueous Zn(NO(3))(2)-hexamethylenetetramine (HMTA) chemistry is one of the most common CBD chemistries for ZnO nanowire synthesis, but some details of the reaction mechanism are still not well-understood. Here, we report the use of in situ attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy to study HMTA adsorption from aqueous solutions onto ZnO nanoparticle films and show that HMTA does not adsorb on ZnO. This result refutes earlier claims that the anisotropic morphology arises from HMTA adsorbing onto and capping the ZnO {10 1 0} faces. We conclude that the role of HMTA in the CBD of ZnO nanowires is only to control the saturation index of ZnO. Furthermore, we demonstrate the first deposition of ZnO nanowire arrays at 90 °C and near-neutral pH conditions without HMTA. Nanowires were grown using the pH buffer 2-(N-morpholino)ethanesulfonic acid (MES) and continuous titratation with KOH to maintain the same pH conditions where growth with HMTA occurs. This semi-batch synthetic method opens many new opportunities to tailor the ZnO morphology and properties by independently controlling temperature and pH.     

ZnO纳米棒阵列的同步法制备及其PL性能研究

在较低温度下，采用化学法在Zn片和玻璃片上同步制备了ZnO纳米棒阵列。利用XRD、FESEM和HRTEM对样品进行了表征，并且通过光致发光谱研究了阵列的光致发光(PL)性能。结果表明，ZnO纳米棒阵列较为致密、取向性较好。纳米棒为六方纤锌矿相，沿c轴生长，平均直径约为60 nm。同步法制备的2种ZnO纳米棒阵列均具有较好的紫外和橙红色发光性能，但发光特性却存在一定差异，这可能主要是由于2种阵列中纳米棒的缺陷含量不同所致。     

Growth mechanism, photoluminescence, and field-emission properties of ZnO nanoneedle arrays

ZnO nanoneedle arrays have been grown on a large scale with a chemical vapor deposition method at 680 degrees C. Zn powder and O(2) gas are employed as source materials, and catalyst-free Si plates are used as substrates. Energy-dispersive X-ray and X-ray diffraction analyses show that the nanoneedles are almost pure ZnO and preferentially aligned in the c-axis direction of the wurtzite structure. The growth mechanism of ZnO nanoneedle arrays is discussed with the thermodynamic theory and concluded to be the result of the co-effect of the surface tension and diffusion. Photoluminescence spectrum of the as-grown products shows a strong emission band centering at about 484 nm, which originates from oxygen vacancies. Field-emission examination exhibits that the ZnO nanoneedle arrays have a turn-on voltage at about 5.3 V/microm.     

Hydrothermal growth of well-aligned ZnO nanorod arrays: Dependence of morphology and alignment ordering upon preparing conditions

Well-aligned ZnO nanorod arrays were prepared on substrates by hydrothermal growth under different conditions. The effect of preparing conditions on the deposition of ZnO nanorods was systematically studied by scanning electron microscopy, X-ray diffraction and photoluminescence spectroscopy. It is demonstrated that the growth conditions such as pre-treatment of the substrates, growth temperature, deposition time and the concentration of the precursors have great influence on the morphology and the alignment ordering of ZnO nanorod arrays. Pre-treatment of substrates, including dispersion of ZnO nanoparticles and subsequent annealing, not only plays a main role in governing the rod diameter, but also greatly improves the rod orientation. Although the rod diameter and its distribution are mainly determined by pre-coated ZnO nanoparticles, they can also be monitored to some extent by changing the concentration of the precursors. The growth temperature has a little influence on the orientation of nanorods but it has great impact on their aspect ratio and the photoluminescent property. Kinetic studies show that the growth of ZnO nanorods contains two distinct step: a fast steps within the first hour, in which the nanorods tend to be short and wide, and a slow step, in which long rods with high aspect ratio are obtained.     

Effect of seed layer on the growth and the consequent gas sensing characteristics of ZnO nanorod arrays using aqueous chemical growth

The ZnO nanorod arrays are grown on the sol–gel-derived seed layer through aqueous chemical growth, and then assembled as gas sensors for detecting carbon monoxide (CO). It is found that the structural and photoluminescent properties of the ZnO nanorod arrays are different as they are grown on seed layers annealed at different temperature (300–700 °C), which is ascribed to distinct growth kinetics of nanorods on the annealed seed layer. Moreover, the correlation between the exposed surface area and the defect density of those ZnO nanorod arrays points out the intrinsic (interior) defects can dominate the green emission instead of surface defects in the present study. Furthermore, the quantities of chemisorbed oxygen on ZnO nanorod arrays can be estimated through XPS analysis. Consequently, the influence of intrinsic defects and chemisorbed oxygen on the electrical properties and gas sensitivities of ZnO nanorod arrays has been clearly elucidated. It is demonstrated that the more adsorbed oxygen and an appropriate amount of intrinsic defects is advantageous to obtain superior CO gas sensitivity for ZnO nanorod arrays.     

Ti基ZnO纳米棒阵列的制备及其光催化性能研究

采用两电极体系中恒电流电沉积在Ti基底上制得较均一的ZnO纳米棒阵列,利用SEM和XRD观察表征样品,研究Zn(NO₃)₂浓度及电流密度对ZnO纳米棒阵列微观形貌的影响. 以甲基橙为目标降解物,考察该电极光催化性能. 结果表明,Zn(NO₃)₂浓度和电流密度对纳米棒阵列的形貌有显著影响;与ITO玻璃等其他基底相比,在Ti基底上也可沉积较好均一取向的ZnO纳米棒阵列;紫外灯照射下,ZnO/Ti电极对甲基橙（10 mg·L^-1）模拟印染废水降解2.5 h,降解率达到83.3%,光催化活性较佳;无光照时ZnO纳米棒的降解率仅7%.     

Anisotropic wet etched silicon substrates for reoriented and selective growth of ZnO nanowires and enhanced hydrophobicity

Herein we report the fabrication of ZnO nanowires on anisotropic wet etched silicon substrates by selective hydrothermal growth. <100> oriented silicon wafers were first patterned by anisotropic wet etch with a KOH solution, resulting in V-shaped stripes of different periods. Then, a thin layer of gold was deposited and annealed to promote the hydrothermal growth of ZnO nanowires. It was found that the growth rate of ZnO nanowires on <111> surfaces was much higher than that on <100> surfaces. As a first application of such micro- and nanostructured surfaces, we show enhanced wetting properties by measuring the contact angle of water droplets on the samples obtained under different patterning and growth conditions. Our results also demonstrated the possibility of tuning the contact angle of the sample in the range between 115° and 155°, by changing either the pattern of the silicon template or the hydrothermal growth conditions.     

Optimization of processing parameters on the controlled growth of ZnO nanorod arrays for the performance improvement of solid-state dye-sensitized solar cells

High-transparency and high quality ZnO nanorod arrays were grown on the ITO substrates by a two-step chemical bath deposition (CBD) method. The effects of processing parameters including reaction temperature (25-95 °C) and solution concentration (0.01-0.1 M) on the crystal growth, alignment, optical and electrical properties were systematically investigated. It has been found that these process parameters are critical for the growth, orientation and aspect ratio of the nanorod arrays, showing different structural and optical properties. Experimental results reveal that the hexagonal ZnO nanorod arrays prepared under reaction temperature of 95 °C and solution concentration of 0.03 M possess highest aspect ratio of ∼21, and show the well-aligned orientation and optimum optical properties. Moreover the ZnO nanorod arrays based heterojunction electrodes and the solid-state dye-sensitized solar cells (SS-DSSCs) were fabricated with an improved optoelectrical performance.