分子烙印手性固定相分离过程热力学研究

考察了温度对分子烙印固定相手性分离的影响,计算了手性分离过程中的热力学参数.结果表明,分子烙印手性固定相的分离过程为焓控制过程.随着温度的升高,样品的容量因子降低,手性选择因子α减小.样品与分子烙印固定相的作用力包括非特异作用力和特异作用力,只有特异作用力的差值才是手性分离的本质.分子烙印产生的空穴对热力学参数有较大的影响,烙印分子与烙印空穴的匹配性最好,烙印空穴对烙印分子的结合在能量和构型上都是有利的.     

利用分子烙印手性固定相串联柱同时拆分两对对映体

采用复合功能单体制备了苯甲氧羰基－Ｌ－丝氨酸（Ｎ－Ｃｂｚ－Ｌ－Ｓｅｒ）和苯甲氧羰基－Ｌ－丙氨酸（Ｎ－Ｃｂｚ－Ｌ－Ａｌａ）烙印的分子烙印手性固定相。采用柱串联的方法,一次进样手性分离了苯甲氧羰基－ＤＬ－丝氨酸（Ｎ－Ｃｂｚ－ＤＬ－Ｓｅｒ）和苯甲氧羰基－ＤＬ－丙氨酸（Ｎ－Ｃｂｚ－ＤＬ－Ａｌａ）两对对映体,显示了分子烙印手性固定相在多对对映体同时手性分离的发展潜力。     

复合碱性功能单体分子烙印手性固定相

采用丙烯酰胺+2-乙烯基吡啶的复合碱性功能单体体系制备了氨基酸衍生物分子烙印高效液相色谱手性固定相。在优化了功能单体与烙印分子的比例条件下对于烙印分子及其结构相似的对映体具有良好的手性分离能力。考察了烙印分子的化学基团对手性分离的影响,发现氢键作用力和较强的离子作用力在手性分离过程中均有贡献。     

分子烙印聚合物的结构表征及手性拆分中的热力学研究

考察了一系列分子烙印聚合物的热稳定性和孔结构,探讨了孔结构与手性选择性的关系。计算了手性分离过程中的某些热力学参数的变化,发现分子烙印聚合物上的手性分离是一个焓控制的过程,热力学参数的变化同烙印分子的结构有关。     

功能单体对分子烙印手性固定相手性拆分能力的影响

系统考察了功能单体对非共价分子烙印手性固定相手性分离能力的影响,发现在非共价分子烙印手性固定相的制备中,功能单体与烙印分子之间存在着匹配性。丙烯酰胺可以与氨基酸衍生物的酰胺基团形成较强的氢键作用,碱性功能单体2-乙烯基吡啶则与其羧基形成较离子作用,两者的协同作用使复合功能单体丙烯酰胺+2-乙烯基吡啶对于氨基酸衍生物具有良好的烙印效果。竞争溶剂乙酸对样品与分子固定相间的非共价作用力有较大的影响,增加流动相中的竞争溶剂乙酸的含量,将减弱分子手性固定相与样品的酰胺键和羧基的氢键及离子作用,导致对样品的容量因子、手性选择性α及分离度f/g的减小。     

L-扁桃酸金属配位分子烙印聚合物的手性分离能力

以CuⅡ-[N-(4-vinylbenzyl)]im inod iacetic ac id为功能单体、三甲氧基丙烷三甲基丙烯酸酯为交联剂、甲醇为聚合溶剂,制备了L-扁桃酸的金属配位分子烙印聚合物。用它作为色谱固定相,系统考察了流动相的pH、甲醇含量以及缓冲溶液的浓度对其手性分离能力的影响。在中性或弱碱性(pH 7~9)流动相条件下,L-扁桃酸的金属配位分子烙印聚合物对D,L-扁桃酸的手性分离效果最好;其手性分离能力随流动相中甲醇含量和缓冲溶液浓度的增大而增强。本研究的工作为在极性溶剂中制备高选择性的分子烙印聚合物提供了实践支持。     

复合作用分子烙印手性色谱固定相

采用复合作用力，以Ｎ－ｔｅｒｔ－Ｂｕｔｏｘｙ－Ｃｒｂｏｎｙｌ－Ｌ－Ｔｒｙｐｔｏｐｈａｎ的烙印分子合成了一种对Ｎ－ｔ－Ｂｏｃ－ＤＬ－Ｔｒｙｐｔｏｐｈａｎ具有良好手性拆分作用的高效液相色谱固定相，并初步研究了其拆分其机理。     

三元交联剂分子烙印手性固定相

采用２－乙烯基吡啶＋丙烯酰胺复合功能单体,以三甲氧基丙烷三甲基丙烯酸酯为三元交联剂制备了苯甲氧羰基－Ｌ－色氨酸烙印手性固定相,并与二元交联剂烙印相同氨基酸衍生物的情况进行了对比,发现三元交联剂在较小的用量下就可使分子烙印聚合物达到足够的交联度,实现烙印分子对映体的基线分离。     

分子烙印聚合物固定相分离咖啡因和茶碱的研究

分子烙印是一种新兴的分子识别技术,利用该技术可制备对烙印分子具有“预定”识别能力的高分子聚合物,即分子烙印聚合物（MIP）,从而可以对性质和组成相近的组如对映体等进行分离^[1,2],咖啡因与茶碱的分子烙印聚合物的制备以及二者分析已有报道^[3-9],但存在两种完全相反的结论。一种观点认为,即使以咖啡因为烙印分子,所制备的聚合物对咖啡因分子的选择性吸附能力也小于茶碱^[3-6]。而另一种观点则认为,在一定条件下,如以咖啡因分子为烙印分子的烙印聚合物对咖啡因分子具有更强的吸附能力^[7-9]。本文分别采用茶碱和咖啡因作为烙印分子,以甲基丙烯酸等为功能单体,在不同条件下制备了多种非共价型分子烙印聚合物,并系统地考察了其作 为HPLC固定相对咖啡因和茶碱的分离能力,同时也对烙印分子应具备的条件加以探讨。     

分子烙印技术的应用与最新进展

分子烙印技术是合成对模板分子具有特定识别能力的聚合物的技术。在第一届分子烙印技术国际会议报告文集的基础上对117篇文献进行了综述。总结了最近分子烙印技术在对映体或立体异构体分离、固相萃取、化学传感器和模拟生物传感器及催化生物反应工程方面取得的成绩和存在的问题。扼要介绍了在分子烙印技术发展过程中出现的新方法、新用途，指明了分子烙印技术的发展趋势。     

Scalemic and racemic imprinting with a chiral crosslinker

The development of molecularly imprinted chiral stationary phases has traditionally been limited by the need for a chiral pure template. Paradoxically, availability of a chiral pure template largely defeats the purpose of developing a chiral stationary phase. To solve this paradox, imprinting of scalemic and racemic template mixtures was investigated using both chiral (N-α-bismethacryloyl-l-alanine) and achiral (N,O-bisacrylamide ethanolamine) crosslinkers. Imprinting of scalemic mixtures provided polymers capable of partial separation of Boc-tyrosine enantiomers with virtually the same results when using either the chiral or achiral crosslinker. However, the chiral crosslinker was required for chiral differentiation by the racemic imprinted polymers which were evaluated in both batch rebinding and chromatographic modes. Batch rebinding analysis revealed intersecting binding isotherms for the L- and D-Boc-tyrosine, indicating bias for the D or L enantiomer is concentration dependent. Partial chromatographic separation was achieved by the racemic imprinted polymers providing variable D or L bias in equal probability over multiple replicates of polymer synthesis. Correlation of enantiomer bias with the batch rebinding results and optimization of HPLC parameters are discussed.     

Chiral electrochemical recognition by very thin molecularly imprinted sol-gel films

Thin films with enantioselective properties for electrochemically active chiral probes were developed. Enantioselectivity was accomplished via molecular imprinting. The films were fabricated through the sol-gel technique and were spin-coated on ITO electrodes. The chiral selectivity recognition was detected using two enantiomer pairs: D- and L-3,4-dihydroxyphenylalanine (D- and L-dopa) and (R)- and (S)-N,N'-dimethylferrocenylethylamine [(R)-Fc and (S)-Fc]. A defined chiral cavity was obtained by selection of functional monomers that interact with the template molecule, followed by its removal. Chiral selection properties were measured by cyclic voltammetry and square wave voltammetry. For both template molecules, very good chiral recognition was revealed by electrochemical measurement. The nonspecific adsorption measured for reference nonimprinted films was negligible (less than 5%). Dopa imprinted films revealed both high sensitivity, by the detection of 1 nM (0.2 ppb) concentration, and excellent selectivity, when challenged with a series of catechol derivatives. Fc-imprinted films were able to detect ca. 2 ppm of the target molecule, with very good enantioselectivity and low nonspecific adsorption. To our knowledge, this is the first report of successful molecular imprinting of a ferrocene derivative.     

Chromatographic characterization of molecularly imprinted polymers binding the herbicide 2,4,5-trichlorophenoxyacetic acid

Two polymers binding the herbicide 2,4,5-trichlorophenoxyacetic acid (2,4,5-T) were prepared by utilising the technique of the non-covalent molecular imprinting polymerisation in an aqueous medium. The polymers obtained were packed in HPLC columns and the effects of the mobile phase composition on the retention of the imprinting molecule and the selectivity of the stationary phases towards several analogous structures were studied by liquid chromatography. The columns showed a good level of selectivity towards the template and strictly related molecules. It was found that the molecular recognition mechanism acting on the columns was dependent on a combination of ion pair and hydrophobic interactions.     

萘普生分子印迹拆分及亲和吸附平衡常数的测定

分子印迹 (Molecular imprinting)是一种新的、很有发展潜力的分离技术 [1～ 3 ] .该技术已成功地用于氨基酸、糖类及其衍生物和药物的手性分离 .萘普生是一种重要的非甾体消炎、解热和镇痛药 ,为了减少给药量和对人体产生的毒副作用 ,必须对其进行手性拆分 . Mosbach等 [4 ] 曾以 4-乙烯基吡啶为功能单体 ,利用分子印迹对外消旋萘普生进行了手性拆分 ,但 4-乙烯基吡啶使用前需经过减压蒸馏 ,使用不便 . Haginaka等 [5～ 7] 也采用 4-乙烯基吡啶为功能单体 ,以 (S) -萘普生为模板制得了均一粒径的分子印迹介质 .尽管分子印迹分离技术发展…     

Efficient Separation of Hydrophobic Molecules by Molecularly Imprinted Cyclodextrin Polymers

Cyclodextrins were cross-linked with toluene 2,4-diisocyanate in dimethyl sufoxide in the presence of hydrophobic biomolecules as templates, and the imprinted polymers were applied to the stationary phases of high performance liquid chromatography. Molecular imprinting efficiently promoted the binding-affinity and substrate-selectivity towards the template molecule, compared with the control polymers prepared in their absence. When cholesterol (template molecule) was complexed with cyclodextrins prior to the polymerization, for example, the imprinted polymer retained cholesterol more strongly than other steroids. Upon the polymerization without a template molecule, the binding towards steroids was much weaker. Besides steroids, imprinting was effective for various hydrophobic and rigid template molecules. Since binding of the guest molecule was based on inclusion complex formation with cyclodextrins, separation could be achieved in the solvents containing water. These polymeric receptors are also applicable to selective recognition of biologically important molecules or removal of toxic molecules from aqueous media. Thus, imprinting of cyclodextrins is useful for the preparation of synthetic tailor-made receptors for various kinds of hydrophobic guest molecules.     

Simultaneous Chiral Separation Using a Combinatorial Molecular Imprinting Phase

Molecular imprinting is a technology by which specific recognition sites can be producedby using a template molecule in the polymerization procedure. In recent years,molecular imprinting has become an important approach for the preparation of chiralstationary phase with predetermined selectivity'-'. So far, the commonly atilizedfunctional monomers include methacrylic acid', acrylamide' and 4-vinylpyridine',combined functional monomers such as methacrylic acid 2-vinylpyridine'-' andacrylamide…     

Imprinted chiral stationary phases in high-performance liquid chromatography

Polymers imprinted with chiral templates offer a new generation of tailor-made chiral stationary phases (CSPs) with predictable selectivities. This review summarizes the present state of the art of molecular imprinting to generate tailor-made CSPs and provides an overview of the main factors involved in the manufacturing process that are crucial to the chromatographic performance of the phases.