Highly Efficient Porous Carbon Electrocatalyst with Controllable N‐Species Content for Selective CO2 Reduction

We report a straightforward strategy to design efficient N doped porous carbon (NPC) electrocatalyst that has a high concentration of easily accessible active sites for the CO₂ reduction reaction (CO₂RR). The NPC with large amounts of active N (pyridinic and graphitic N) and highly porous structure is prepared by using an oxygen‐rich metal–organic framework (Zn‐MOF‐74) precursor. The amount of active N species can be tuned by optimizing the calcination temperature and time. Owing to the large pore sizes, the active sites are well exposed to electrolyte for CO₂RR. The NPC exhibits superior CO₂RR activity with a small onset potential of ?0.35 V and a high faradaic efficiency (FE) of 98.4 % towards CO at ?0.55 V vs. RHE, one of the highest values among NPC‐based CO₂RR electrocatalysts. This work advances an effective and facile way towards highly active and cost‐effective alternatives to noble‐metal CO₂RR electrocatalysts for practical applications.     

Electrochemical Conversion of CO2 to Syngas with Controllable CO/H2 Ratios over Co and Ni Single‐Atom Catalysts

The electrochemical CO₂ reduction reaction (CO₂RR) to yield synthesis gas (syngas, CO and H₂) has been considered as a promising method to realize the net reduction in CO₂ emission. However, it is challenging to balance the CO₂RR activity and the CO/H₂ ratio. To address this issue, nitrogen‐doped carbon supported single‐atom catalysts are designed as electrocatalysts to produce syngas from CO₂RR. While Co and Ni single‐atom catalysts are selective in producing H₂ and CO, respectively, electrocatalysts containing both Co and Ni show a high syngas evolution (total current >74 mA cm^?2) with CO/H₂ ratios (0.23–2.26) that are suitable for typical downstream thermochemical reactions. Density functional theory calculations provide insights into the key intermediates on Co and Ni single‐atom configurations for the H₂ and CO evolution. The results present a useful case on how non‐precious transition metal species can maintain high CO₂RR activity with tunable CO/H₂ ratios.     

Highly Efficient Porous Carbon Electrocatalyst with Controllable N-Species Content for Selective CO2 Reduction

We report a straightforward strategy to design efficient N doped porous carbon (NPC) electrocatalyst that has a high concentration of easily accessible active sites for the CO₂ reduction reaction (CO₂RR). The NPC with large amounts of active N (pyridinic and graphitic N) and highly porous structure is prepared by using an oxygen-rich metal–organic framework (Zn-MOF-74) precursor. The amount of active N species can be tuned by optimizing the calcination temperature and time. Owing to the large pore sizes, the active sites are well exposed to electrolyte for CO₂RR. The NPC exhibits superior CO₂RR activity with a small onset potential of −0.35 V and a high faradaic efficiency (FE) of 98.4 % towards CO at −0.55 V vs. RHE, one of the highest values among NPC-based CO₂RR electrocatalysts. This work advances an effective and facile way towards highly active and cost-effective alternatives to noble-metal CO₂RR electrocatalysts for practical applications.     

Electrochemical Conversion of CO2 to Syngas with Controllable CO/H2 Ratios over Co and Ni Single-Atom Catalysts

The electrochemical CO₂ reduction reaction (CO₂RR) to yield synthesis gas (syngas, CO and H₂) has been considered as a promising method to realize the net reduction in CO₂ emission. However, it is challenging to balance the CO₂RR activity and the CO/H₂ ratio. To address this issue, nitrogen-doped carbon supported single-atom catalysts are designed as electrocatalysts to produce syngas from CO₂RR. While Co and Ni single-atom catalysts are selective in producing H₂ and CO, respectively, electrocatalysts containing both Co and Ni show a high syngas evolution (total current >74 mA cm⁻²) with CO/H₂ ratios (0.23–2.26) that are suitable for typical downstream thermochemical reactions. Density functional theory calculations provide insights into the key intermediates on Co and Ni single-atom configurations for the H₂ and CO evolution. The results present a useful case on how non-precious transition metal species can maintain high CO₂RR activity with tunable CO/H₂ ratios.     

Fabricating pyridinic N-B sites in porous carbon as efficient metal-free electrocatalyst in conversion CO2 into CH4

Electrochemical reduction of CO₂ (CO₂RR) to value-added chemicals is an attractive strategy for greenhouse gas mitigation and carbon recycle. Carbon material is one of most promising electrocatalysts but its product selectivity is limited by few modulating approaches for active sites. Herein, the predominant pyridinic N-B sites (accounting for 80% to all N species) are fabricated in hierarchically porous structure of graphene nanoribbons/amorphous carbon. The graphene nanoribbons and porous structure can accelerate electron and ion/gas transport during CO₂RR, respectively. This carbon electrocatalyst exhibits excellent selectivity toward CO₂ reduction to CH₄ with the faradaic efficiency of 68% at −0.50 V vs. RHE. As demonstrated by density functional theory, a proper adsorbed energy of *CO and *CH₂O are generated on the pyridinic N-B site resulting into high CH₄ selectivity. Therefore, this study provides a novel method to modulate active sites of carbon-based electrocatalyst to obtain high CH₄ selectivity.     

Aqueous CO2 Reduction with High Efficiency Using α‐Co(OH)2‐Supported Atomic Ir Electrocatalysts

Electrochemical reduction of CO₂ into energy‐dense chemical feedstock and fuels provides an attractive pathway to sustainable energy storage and artificial carbon cycle. Herein, we report the first work to use atomic Ir electrocatalyst for CO₂ reduction. By using α‐Co(OH)₂ as the support, the faradaic efficiency of CO could reach 97.6 % with a turnover frequency (TOF) of 38290 h^?1 in aqueous electrolyte, which is the highest TOF up to date. The electrochemical active area is 23.4‐times higher than Ir nanoparticles (2 nm), which is highly conductive and favors electron transfer from CO₂ to its radical anion (CO₂^.?). Moreover, the more efficient stabilization of CO₂^.? intermediate and easy charge transfer makes the atomic Ir electrocatalyst facilitate CO production. Hence, α‐Co(OH)₂‐supported atomic Ir electrocatalysts show enhanced CO₂ activity and stability.     

Catalytic Reduction of CN−, CO,and CO2 by Nitrogenase Cofactors in Lanthanide‐Driven Reactions

Nitrogenase cofactors can be extracted into an organic solvent to catalyze the reduction of cyanide (CN^?), carbon monoxide (CO), and carbon dioxide (CO₂) without using adenosine triphosphate (ATP), when samarium(II) iodide (SmI₂) and 2,6‐lutidinium triflate (Lut‐H) are employed as a reductant and a proton source, respectively. Driven by SmI₂, the cofactors catalytically reduce CN^? or CO to C₁–C₄ hydrocarbons, and CO₂ to CO and C₁–C₃ hydrocarbons. The C? C coupling from CO₂ indicates a unique Fischer–Tropsch‐like reaction with an atypical carbonaceous substrate, whereas the catalytic turnover of CN^?, CO, and CO₂ by isolated cofactors suggests the possibility to develop nitrogenase‐based electrocatalysts for the production of hydrocarbons from these carbon‐containing compounds.     

Catalytic Reduction of CN−, CO,and CO2 by Nitrogenase Cofactors in Lanthanide‐Driven Reactions

Nitrogenase cofactors can be extracted into an organic solvent to catalyze the reduction of cyanide (CN⁻), carbon monoxide (CO), and carbon dioxide (CO₂) without using adenosine triphosphate (ATP), when samarium(II) iodide (SmI₂) and 2,6‐lutidinium triflate (Lut‐H) are employed as a reductant and a proton source, respectively. Driven by SmI₂, the cofactors catalytically reduce CN⁻ or CO to C₁–C₄ hydrocarbons, and CO₂ to CO and C₁–C₃ hydrocarbons. The C C coupling from CO₂ indicates a unique Fischer–Tropsch‐like reaction with an atypical carbonaceous substrate, whereas the catalytic turnover of CN⁻, CO, and CO₂ by isolated cofactors suggests the possibility to develop nitrogenase‐based electrocatalysts for the production of hydrocarbons from these carbon‐containing compounds.     

Regulation of Coordination Number over Single Co Sites: Triggering the Efficient Electroreduction of CO2

The design of active, selective, and stable CO₂ reduction electrocatalysts is still challenging. A series of atomically dispersed Co catalysts with different nitrogen coordination numbers were prepared and their CO₂ electroreduction catalytic performance was explored. The best catalyst, atomically dispersed Co with two‐coordinate nitrogen atoms, achieves both high selectivity and superior activity with 94 % CO formation Faradaic efficiency and a current density of 18.1 mA cm^?2 at an overpotential of 520 mV. The CO formation turnover frequency reaches a record value of 18 200 h^?1, surpassing most reported metal‐based catalysts under comparable conditions. Our experimental and theoretical results demonstrate that lower a coordination number facilitates activation of CO₂ to the CO₂^.? intermediate and hence enhances CO₂ electroreduction activity.     

Bipyridine‐Assisted Assembly of Au Nanoparticles on Cu Nanowires To Enhance the Electrochemical Reduction of CO2

We report a new strategy to prepare a composite catalyst for highly efficient electrochemical CO₂ reduction reaction (CO₂RR). The composite catalyst is made by anchoring Au nanoparticles on Cu nanowires via 4,4′‐bipyridine (bipy). The Au‐bipy‐Cu composite catalyzes the CO₂RR in 0.1 m KHCO₃ with a total Faradaic efficiency (FE) reaching 90.6 % at ?0.9 V to provide C‐products, among which CH₃CHO (25 % FE) dominates the liquid product (HCOO^?, CH₃CHO, and CH₃COO^?) distribution (75 %). The enhanced CO₂RR catalysis demonstrated by Au‐bipy‐Cu originates from its synergistic Au (CO₂ to CO) and Cu (CO to C‐products) catalysis which is further promoted by bipy. The Au‐bipy‐Cu composite represents a new catalyst system for effective CO₂RR conversion to C‐products.     

Accelerated Transfer and Spillover of Carbon Monoxide through Tandem Catalysis for Kinetics-boosted Ethylene Electrosynthesis

Cu-based catalysts have been widely applied in electroreduction of carbon dioxide (CO₂ER) to produce multicarbon (C₂₊) feedstocks (e.g., C₂H₄). However, the high energy barriers for CO₂ activation on the Cu surface is a challenge for a high catalytic efficiency and product selectivity. Herein, we developed an in situ *CO generation and spillover strategy by engineering single Ni atoms on a pyridinic N-enriched carbon support with a sodalite (SOD) topology (Ni-SOD/NC) that acted as a donor to feed adjacent Cu nanoparticles (NPs) with *CO intermediate. As a result, a high C₂H₄ selectivity of 62.5 % and an industrial-level current density of 160 mA cm⁻² at a low potential of −0.72 V were achieved. Our studies revealed that the isolated NiN₃ active sites with adjacent pyridinic N species facilitated the *CO desorption and the massive *CO intermediate released from Ni-SOD/NC then overflowed to Cu NPs surface to enrich the *CO coverage for improving the selectivity of CO₂ER to C₂H₄.     

Organic molecules involved in Cu-based electrocatalysts for selective CO2 reduction to C2+ products

Electrocatalytic carbon dioxide (CO₂) reduction reaction (CO₂RR) is a promising process to mitigate the environmental issues caused by CO₂, as well as to produce valuable multicarbon (C₂₊) products. Significant progresses have been made to explore highly efficient Cu-based electrocatalysts for CO₂RR in recent years. Adding organic molecules into electrocatalytic systems can tune the CO₂ interaction with the electrocatalysts for CO₂RR, therefore, the final C₂₊ products, which are not solely achieved by inorganic modification. In this review, we will summarize the recent progress of the organic molecules participation in CO₂ electroreduction to C₂₊ products on Cu-based electrocatalysts. The applied organic molecules are reviewed based on the heteroatoms (N and S), with the emphasis on their roles in activity and selectivity toward C₂₊ products. A perspective on the application of organic molecules for efficient and selective CO₂RR has been provided.     

Thiol‐Assisted Synthesis of Carbon‐Supported Metal Nanoparticles for Efficient Electrocatalytic CO2 Reduction

The typical preparation route of carbon‐supported metallic catalyst is complex and uneconomical. Herein, we reported a thiol‐assisted one‐pot method by using 3‐mercaptopropionic acid (MPA) to synthesize carbon‐supported metal nanoparticles catalysts for efficient electrocatalytic reduction of carbon dioxide (CO₂RR). We found that the synthesized Au?MPA/C catalyst achieves a maximum CO faradaic efficiency (FE) of 96.2% with its partial current density of ?11.4 mA/cm², which is much higher than that over Au foil or MPA‐free carbon‐supported Au (Au/C). The performance improvement in CO₂RR over the catalyst is probably derived from the good dispersion of Au nanoparticles and the surface modification of the catalyst caused by the specific interaction between Au nanoparticles and MPA. This thiol‐assisted method can be also extended to synthesize Ag?MPA/C with enhanced CO₂RR performance.     

Boosting CO2 Electroreduction on N,P‐Co‐doped Carbon Aerogels

Electroreduction of CO₂ to CO powered by renewable electricity is a possible alternative to synthesizing CO from fossil fuel. However, it is very hard to achieve high current density at high faradaic efficiency (FE). Here, the first use of N,P‐co‐doped carbon aerogels (NPCA) to boost CO₂ reduction to CO is presented. The FE of CO could reach 99.1 % with a partial current density of ?143.6 mA cm^?2, which is one of the highest current densities to date. NPCA has higher electrochemical active area and overall electronic conductivity than that of N‐ or P‐doped carbon aerogels, which favors electron transfer from CO₂ to its radical anion or other key intermediates. By control experiments and theoretical calculations, it is found that the pyridinic N was very active for CO₂ reduction to CO, and co‐doping of P with N hinder the hydrogen evolution reaction (HER) significantly, and thus the both current density and FE are very high.     

Elucidating the Electrocatalytic CO2 Reduction Reaction over a Model Single‐Atom Nickel Catalyst

Designing effective electrocatalysts for the carbon dioxide reduction reaction (CO₂RR) is an appealing approach to tackling the challenges posed by rising CO₂ levels and realizing a closed carbon cycle. However, fundamental understanding of the complicated CO₂RR mechanism in CO₂ electrocatalysis is still lacking because model systems are limited. We have designed a model nickel single‐atom catalyst (Ni SAC) with a uniform structure and well‐defined Ni‐N₄ moiety on a conductive carbon support with which to explore the electrochemical CO₂RR. Operando X‐ray absorption near‐edge structure spectroscopy, Raman spectroscopy, and near‐ambient X‐ray photoelectron spectroscopy, revealed that Ni⁺ in the Ni SAC was highly active for CO₂ activation, and functioned as an authentic catalytically active site for the CO₂RR. Furthermore, through combination with a kinetics study, the rate‐determining step of the CO₂RR was determined to be *CO₂^?+H⁺→*COOH. This study tackles the four challenges faced by the CO₂RR; namely, activity, selectivity, stability, and dynamics.     

Efficient Fe‐Co‐N‐C Electrocatalyst Towards Oxygen Reduction Derived from a Cationic CoII‐based Metal–Organic Framework Modified by Anion‐Exchange with Potassium Ferricyanide

Fe‐Co‐N‐C electrocatalysts have proven superior to their counterparts (e.g. Fe‐N‐C or Co‐N‐C) for the oxygen reduction reaction (ORR). Herein, we report on a unique strategy to prepare Fe‐Co‐N‐C?x (x refers to the pyrolysis temperature) electrocatalysts which involves anion‐exchange of [Fe(CN)₆]^3? into a cationic Co^II‐based metal‐organic framework precursor prior to heat treatment. Fe‐Co‐N‐C‐900 exhibits an optimal ORR catalytic performance in an alkaline electrolyte with an onset potential (E_onset: 0.97 V) and half‐wave potential (E_1/2: 0.86 V) comparable to that of commercial Pt/C (E_onset=1.02 V; E_1/2=0.88 V), which outperforms the corresponding Co‐N‐C‐900 sample (E_onset=0.92 V; E_1/2=0.84 V) derived from the same MOF precursor without anion‐exchange modification. This is the first example of Fe‐Co‐N‐C electrocatalysts fabricated from a cationic Co^II‐based MOF precursor that dopes the Fe element via anion‐exchange, and our current work provides a new entrance towards MOF‐derived transition‐metal (e.g. Fe or Co) and nitrogen‐codoped carbon electrocatalysts with excellent ORR activity.     

Tailoring Copper Nanocrystals towards C2 Products in Electrochemical CO2 Reduction

Favoring the CO₂ reduction reaction (CO2RR) over the hydrogen evolution reaction and controlling the selectivity towards multicarbon products are currently major scientific challenges in sustainable energy research. It is known that the morphology of the catalyst can modulate catalytic activity and selectivity, yet this remains a relatively underexplored area in electrochemical CO₂ reduction. Here, we exploit the material tunability afforded by colloidal chemistry to establish unambiguous structure/property relations between Cu nanocrystals and their behavior as electrocatalysts for CO₂ reduction. Our study reveals a non‐monotonic size‐dependence of the selectivity in cube‐shaped copper nanocrystals. Among 24 nm, 44 nm and 63 nm cubes tested, the cubes with 44 nm edge length exhibited the highest selectivity towards CO2RR (80 %) and faradaic efficiency for ethylene (41 %). Statistical analysis of the surface atom density suggests the key role played by edge sites in CO2RR.     

Metal‐Doped Nitrogenated Carbon as an Efficient Catalyst for Direct CO2 Electroreduction to CO and Hydrocarbons

This study explores the kinetics, mechanism, and active sites of the CO₂ electroreduction reaction (CO2RR) to syngas and hydrocarbons on a class of functionalized solid carbon‐based catalysts. Commercial carbon blacks were functionalized with nitrogen and Fe and/or Mn ions using pyrolysis and acid leaching. The resulting solid powder catalysts were found to be active and highly CO selective electrocatalysts in the electroreduction of CO₂ to CO/H₂ mixtures outperforming a low‐area polycrystalline gold benchmark. Unspecific with respect to the nature of the metal, CO production is believed to occur on nitrogen functionalities in competition with hydrogen evolution. Evidence is provided that sufficiently strong interaction between CO and the metal enables the protonation of CO and the formation of hydrocarbons. Our results highlight a promising new class of low‐cost, abundant electrocatalysts for synthetic fuel production from CO₂.     

Azafullerene C59N–Phthalocyanine Dyad: Synthesis,Characterisation and Photoinduced Electron Transfer

The synthesis of a new azafullerene C₅₉N–phthalocyanine (Pc) dyad is described. The key step for the synthesis of the C₅₉N–Pc dyad was the formation of the C₅₉N‐based carboxylic acid, which was smoothly condensed with hydroxy‐modified Pc. The structure of the C₅₉N–Pc dyad was verified by ¹H and ¹³C NMR spectroscopy, IR spectroscopy, UV/Vis spectroscopy and MS measurements. The photophysical and electrochemical properties of the C₅₉N–Pc dyad were investigated in both polar and non‐polar solvents by steady state and time‐resolved photoluminescence and absorption spectroscopy, as well as by cyclic voltammetry. Different relaxation pathways for the photoexcited C₅₉N–Pc dyad, as a result of changing the solvent polarity, were found, thus giving rise to energy‐transfer phenomena in non‐polar toluene and charge‐transfer processes in polar benzonitrile. Finally, the detailed quenching mechanisms were evaluated and compared with that of a C₆₀–Pc dyad, which revealed that the different excited‐state energies and reduction potentials of the two fullerene spheres (i.e. C₅₉N vs. C₆₀) strongly diverged in the deactivation pathways of the excited states of the corresponding phthalocyanine dyads.     

Breaking K+ Concentration Limit on Cu Nanoneedles for Acidic Electrocatalytic CO2 Reduction to Multi-Carbon Products

Electrocatalytic CO₂ reduction reaction (CO₂RR) to multi-carbon products (C₂₊) in acidic electrolyte is one of the most advanced routes for tackling our current climate and energy crisis. However, the competing hydrogen evolution reaction (HER) and the poor selectivity towards the valuable C₂₊ products are the major obstacles for the upscaling of these technologies. High local potassium ions (K⁺) concentration at the cathode's surface can inhibit proton-diffusion and accelerate the desirable carbon-carbon (C−C) coupling process. However, the solubility limit of potassium salts in bulk solution constrains the maximum achievable K⁺ concentration at the reaction sites and thus the overall acidic CO₂RR performance of most electrocatalysts. In this work, we demonstrate that Cu nanoneedles induce ultrahigh local K⁺ concentrations (4.22 M) – thus breaking the K⁺ solubility limit (3.5 M) – which enables a highly efficient CO₂RR in 3 M KCl at pH=1. As a result, a Faradaic efficiency of 90.69±2.15 % for C₂₊ (FE_C2+) can be achieved at 1400 mA.cm⁻², simultaneous with a single pass carbon efficiency (SPCE) of 25.49±0.82 % at a CO₂ flow rate of 7 sccm.