Highly Efficient Porous Carbon Electrocatalyst with Controllable N‐Species Content for Selective CO2 Reduction

We report a straightforward strategy to design efficient N doped porous carbon (NPC) electrocatalyst that has a high concentration of easily accessible active sites for the CO₂ reduction reaction (CO₂RR). The NPC with large amounts of active N (pyridinic and graphitic N) and highly porous structure is prepared by using an oxygen‐rich metal–organic framework (Zn‐MOF‐74) precursor. The amount of active N species can be tuned by optimizing the calcination temperature and time. Owing to the large pore sizes, the active sites are well exposed to electrolyte for CO₂RR. The NPC exhibits superior CO₂RR activity with a small onset potential of ?0.35 V and a high faradaic efficiency (FE) of 98.4 % towards CO at ?0.55 V vs. RHE, one of the highest values among NPC‐based CO₂RR electrocatalysts. This work advances an effective and facile way towards highly active and cost‐effective alternatives to noble‐metal CO₂RR electrocatalysts for practical applications.     

Fabricating pyridinic N-B sites in porous carbon as efficient metal-free electrocatalyst in conversion CO2 into CH4

Electrochemical reduction of CO₂ (CO₂RR) to value-added chemicals is an attractive strategy for greenhouse gas mitigation and carbon recycle. Carbon material is one of most promising electrocatalysts but its product selectivity is limited by few modulating approaches for active sites. Herein, the predominant pyridinic N-B sites (accounting for 80% to all N species) are fabricated in hierarchically porous structure of graphene nanoribbons/amorphous carbon. The graphene nanoribbons and porous structure can accelerate electron and ion/gas transport during CO₂RR, respectively. This carbon electrocatalyst exhibits excellent selectivity toward CO₂ reduction to CH₄ with the faradaic efficiency of 68% at −0.50 V vs. RHE. As demonstrated by density functional theory, a proper adsorbed energy of *CO and *CH₂O are generated on the pyridinic N-B site resulting into high CH₄ selectivity. Therefore, this study provides a novel method to modulate active sites of carbon-based electrocatalyst to obtain high CH₄ selectivity.     

In Situ Bismuth Nanosheet Assembly for Highly Selective Electrocatalytic CO2 Reduction to Formate

The reduction of carbon dioxide (CO₂) into value-added fuels using an electrochemical method has been regarded as a compelling sustainable energy conversion technology. However, high-performance electrocatalysts for CO₂ reduction reaction (CO₂RR) with high formate selectivity and good stability need to be improved. Earth-abundant Bi has been demonstrated to be active for CO₂RR to formate. Herein, we fabricated an extremely active and selective bismuth nanosheet (Bi-NSs) assembly via an in situ electrochemical transformation of (BiO)₂CO₃ nanostructures. The as-prepared material exhibits high activity and selectivity for CO₂RR to formate, with nearly 94% faradaic efficiency at −1.03 V (versus reversible hydrogen electrode (vs. RHE)) and stable selectivity (>90%) in a large potential window ranging from −0.83 to −1.18 V (vs. RHE) and excellent durability during 12 h continuous electrolysis. In addition, the Bi-NSs based CO₂RR/methanol oxidation reaction (CO₂RR/MOR) electrolytic system for overall CO₂ splitting was constructed, evidencing the feasibility of its practical implementation.     

Highly Selective CO2 Electroreduction to CH4 by In Situ Generated Cu2O Single-Type Sites on a Conductive MOF: Stabilizing Key Intermediates with Hydrogen Bonding

It is still a great challenge to achieve high selectivity of CH₄ in CO₂ electroreduction reactions (CO₂RR) because of the similar reduction potentials of possible products and the sluggish kinetics for CO₂ activation. Stabilizing key reaction intermediates by single type of active sites supported on porous conductive material is crucial to achieve high selectivity for single product such as CH₄. Here, Cu₂O(111) quantum dots with an average size of 3.5 nm are in situ synthesized on a porous conductive copper-based metal–organic framework (CuHHTP), exhibiting high selectivity of 73 % towards CH₄ with partial current density of 10.8 mA cm⁻² at −1.4 V vs. RHE (reversible hydrogen electrode) in CO₂RR. Operando infrared spectroscopy and DFT calculations reveal that the key intermediates (such as *CH₂O and *OCH₃) involved in the pathway of CH₄ formation are stabilized by the single active Cu₂O(111) and hydrogen bonding, thus generating CH₄ instead of CO.     

Ultra-small Size ZIF-8 Materials for Efficient and Selective Electrocatalytic Reduction of CO2 to CO

Zeolitic Imidazolate Frameworks (ZIFs) are considered as a novel porous material combining high stability in inorganic zeolites with high porosity and organic functionality of MOFs. The cage-like structure selectively and efficiently traps CO₂, which is an indispensable and critical step for Electrocatalytic CO₂ Reduction Reaction (CO₂RR). In this work, ultrasmall ZIF-8 nanomaterials are synthesized by tuning the molar ratio of the feedstock and used as electrocatalysts for the selective reduction of CO₂ to CO. The catalytic activity of the ultra-small size ZIF-8 material for the electrocatalytic reduction of CO₂ can reach satisfactory results with a Faraday efficiency of 91 % for CO and a stability of 12.5 h at a high applied potential of −1.8 V vs. RHE. The investigation can provide a new idea to explore for the design and improvement of catalysts for CO₂RR.     

Waste-yeast biomass as nitrogen/phosphorus sources and carbon template: Environment-friendly synthesis of N,P-Mo2C nanoparticles on porous carbon matrix for efficient hydrogen evolution

Tailor-made advanced electrocatalysts with high active and stable for hydrogen evolution reaction （HER）play a key role in the development of hydrogen economy.Herein,a N,P-co-doped molybdenum carbide confined in porous carbon matrix （N,P-Mo₂C/NPC） with a hierarchical structure is prepared by a resources recovery process.The N,P-Mo₂C/NPC compound exhibits outstanding HER activity with a low overpotential of 84 mV to achieve 10 mA/cm²,and excellent stability in alka...     

Regulating Efficient and Selective Single-atom Catalysts for Electrocatalytic CO2 Reduction

Anchoring transition metal (TM) atoms on suitable substrates to form single-atom catalysts (SACs) is a novel approach to constructing electrocatalysts. Graphdiyne with sp−sp² hybridized carbon atoms and uniformly distributed pores have been considered as a potential carbon material for supporting metal atoms in a variety of catalytic processes. Herein, density functional theory (DFT) calculations were performed to study the single TM atom anchoring on graphdiyne (TM₁−GDY, TM=Sc, Ti, V, Cr, Mn, Co and Cu) as the catalysts for CO₂ reduction. After anchoring metal atoms on GDY, the catalytic activity of TM₁−GDY (TM=Mn, Co and Cu) for CO₂ reduction reaction (CO₂RR) are significantly improved comparing with the pristine GDY. Among the studied TM₁−GDY, Cu₁−GDY shows excellent electrocatalytic activity for CO₂ reduction for which the product is HCOOH and the limiting potential (U_L) is −0.16 V. Mn₁−GDY and Co₁−GDY exhibit superior catalytic selectivity for CO₂ reduction to CH₄ with U_L of −0.62 and −0.34 V, respectively. The hydrogen evolution reaction (HER) by TM₁−GDY (TM=Mn, Co and Cu) occurs on carbon atoms, while the active sites of CO₂RR are the transition metal atoms . The present work is expected to provide a solid theoretical basis for CO₂ conversion into valuable hydrocarbons.     

Isolated Tin(IV) Active Sites for Highly Efficient Electroreduction of CO2 to CH4 in Neutral Aqueous Solution

The development of efficient electrocatalysts with non-copper metal sites for electrochemical CO₂ reduction reactions (eCO₂RR) to hydrocarbons and oxygenates is highly desirable, but still a great challenge. Herein, a stable metal–organic framework (DMA)₄[Sn₂(THO)₂] (Sn-THO, THO⁶⁻ = triphenylene-2,3,6,7,10,11-hexakis(olate), DMA = dimethylammonium) with isolated and distorted octahedral SnO₆²⁻ active sites is reported as an electrocatalyst for eCO₂RR, showing an exceptional performance for eCO₂RR to the CH₄ product rather than the common products formate and CO for reported Sn-based catalysts. The partial current density of CH₄ reaches a high value of 34.5 mA cm⁻², surpassing most reported copper-based and all non-Cu metal-based catalysts. Our experimental and theoretical results revealed that the isolated SnO₆²⁻ active site favors the formation of key *OCOH species to produce CH₄ and can greatly inhibit the formation of *OCHO and *COOH species to produce *HCOOH and *CO, respectively.     

Molecular Evidence for Metallic Cobalt Boosting CO2 Electroreduction on Pyridinic Nitrogen

Nitrogen‐doped carbon materials (N‐C_mat) are emerging as low‐cost metal‐free electrocatalysts for the electrochemical CO₂ reduction reaction (CO₂RR), although the activities are still unsatisfactory and the genuine active site is still under debate. We demonstrate that the CO₂RR to CO preferentially takes place on pyridinic N rather than pyrrolic N using phthalocyanine (Pc) and porphyrin with well‐defined N‐C_mat configurations as molecular model catalysts. Systematic experiments and theoretic calculations further reveal that the CO₂RR performance on pyridinic N can be significantly boosted by electronic modulation from in‐situ‐generated metallic Co nanoparticles. By introducing Co nanoparticles, Co@Pc/C can achieve a Faradaic efficiency of 84 % and CO current density of 28 mA cm^?2 at ?0.9 V, which are 18 and 47 times higher than Pc/C without Co, respectively. These findings provide new insights into the CO₂RR on N‐C_mat, which may guide the exploration of cost‐effective electrocatalysts for efficient CO₂ reduction.     

Self-assembly of single metal sites embedded covalent organic frameworks into multi-dimensional nanostructures for efficient CO2 electroreduction

Morphology-controlled electrocatalysts with the ability of CO₂adsorption/activation, mass transfer, high stability and porosity are much desired in electrochemical CO₂reduction reaction（CO₂RR）. Here, three kinds of multi-dimensional nanostructures（i.e., hollow sphere, nanosheets and nanofibers） have been successfully produced through the modulation of porphyrin-based covalent organic frameworks（COFs）with various modulators. The obtained nanostructures with high-s...     

Breaking K+ Concentration Limit on Cu Nanoneedles for Acidic Electrocatalytic CO2 Reduction to Multi-Carbon Products

Electrocatalytic CO₂ reduction reaction (CO₂RR) to multi-carbon products (C₂₊) in acidic electrolyte is one of the most advanced routes for tackling our current climate and energy crisis. However, the competing hydrogen evolution reaction (HER) and the poor selectivity towards the valuable C₂₊ products are the major obstacles for the upscaling of these technologies. High local potassium ions (K⁺) concentration at the cathode's surface can inhibit proton-diffusion and accelerate the desirable carbon-carbon (C−C) coupling process. However, the solubility limit of potassium salts in bulk solution constrains the maximum achievable K⁺ concentration at the reaction sites and thus the overall acidic CO₂RR performance of most electrocatalysts. In this work, we demonstrate that Cu nanoneedles induce ultrahigh local K⁺ concentrations (4.22 M) – thus breaking the K⁺ solubility limit (3.5 M) – which enables a highly efficient CO₂RR in 3 M KCl at pH=1. As a result, a Faradaic efficiency of 90.69±2.15 % for C₂₊ (FE_C2+) can be achieved at 1400 mA.cm⁻², simultaneous with a single pass carbon efficiency (SPCE) of 25.49±0.82 % at a CO₂ flow rate of 7 sccm.     

Intermediates-induced CO2 Reduction Reaction Activity at Single-Atom M−N2 (M=Fe,Co, Ni) Sites

Single-atom M−N₂ (M=Fe, Co, Ni) catalysts exhibit high activity for CO₂ reduction reaction (CO₂RR). However, the CO₂RR mechanism and the origin of activity at the single-atom sites remain unclear, which hinders the development of single-atom M−N₂ catalysts. Here, using density functional theory calculations, we reveal intermediates-induced CO₂RR activity at the single-atom M−N₂ sites. At the M−N₂ sites, the asymmetric *O*CO configuration tends to split into *CO and *OH intermediates. Intermediates become part of the active moiety to form M−(CO)N₂ or M-(OH)N₂ sites, which optimizes the adsorption of intermediates on the M sites. The maximum free energy differences along the optimal CO₂RR pathway are 0.30, 0.54, and 0.28 eV for Fe−(OH)N₂, Co−(CO)N₂, and Ni−(OH)N₂ sites respectively, which is lower than those of Fe−N₂ (1.03 eV), Co−N₂ (1.24 eV) and Ni−N₂ (0.73 eV) sites. The intermediate modification can shift the d-band center of the spin-up (minority) state downward by regulating the charge distribution at the M sites, leading to less charge being accepted by the intermediates from the M sites. This work provides new insights into the understanding of the activity of single-atom M−N₂ sites.     

Organic molecules involved in Cu-based electrocatalysts for selective CO2 reduction to C2+ products

Electrocatalytic carbon dioxide (CO₂) reduction reaction (CO₂RR) is a promising process to mitigate the environmental issues caused by CO₂, as well as to produce valuable multicarbon (C₂₊) products. Significant progresses have been made to explore highly efficient Cu-based electrocatalysts for CO₂RR in recent years. Adding organic molecules into electrocatalytic systems can tune the CO₂ interaction with the electrocatalysts for CO₂RR, therefore, the final C₂₊ products, which are not solely achieved by inorganic modification. In this review, we will summarize the recent progress of the organic molecules participation in CO₂ electroreduction to C₂₊ products on Cu-based electrocatalysts. The applied organic molecules are reviewed based on the heteroatoms (N and S), with the emphasis on their roles in activity and selectivity toward C₂₊ products. A perspective on the application of organic molecules for efficient and selective CO₂RR has been provided.     

Understanding the Origin of Highly Selective CO2 Electroreduction to CO on Ni,N-doped Carbon Catalysts

Ni,N-doped carbon catalysts have shown promising catalytic performance for CO₂ electroreduction (CO₂R) to CO; this activity has often been attributed to the presence of nitrogen-coordinated, single Ni atom active sites. However, experimentally confirming Ni−N bonding and correlating CO₂ reduction (CO₂R) activity to these species has remained a fundamental challenge. We synthesized polyacrylonitrile-derived Ni,N-doped carbon electrocatalysts (Ni-PACN) with a range of pyrolysis temperatures and Ni loadings and correlated their electrochemical activity with extensive physiochemical characterization to rigorously address the origin of activity in these materials. We found that the CO₂R to CO partial current density increased with increased Ni content before plateauing at 2 wt % which suggests a dispersed Ni active site. These dispersed active sites were investigated by hard and soft X-ray spectroscopy, which revealed that pyrrolic nitrogen ligands selectively bind Ni atoms in a distorted square-planar geometry that strongly resembles the active sites of molecular metal–porphyrin catalysts.     

Copper-Sulfur-Nitrogen Cluster Providing a Local Proton for Efficient Carbon Dioxide Photoreduction

Atomically precise Cu clusters are highly desirable as catalysts for CO₂ reduction reaction (CO₂RR), and they provide an appropriate model platform for elaborating their structure–activity relationship. However, an efficient overall photocatalytic CO₂RR with H₂O using assembled Cu-cluster aggregates as single component photocatalyst has not been reported. Herein, we report a stable crystalline Cu−S−N cluster photocatalyst with local protonated N−H groups (denoted as Cu₆−NH ). The catalyst exhibits suitable photocatalytic redox potentials, high structural stability, active catalytic species, and a narrow band gap, which account for its outstanding photocatalytic CO₂RR performance under visible light, with ≈100 % selectivity for CO evolution. Remarkably, systematic isostructural Cu-cluster control experiments, in situ infrared spectroscopy, and density functional theory calculations revealed that the protonated pyrimidine N atoms in the Cu₆−NH cluster act as a proton relay station, providing a local proton during the photocatalytic CO₂RR. This efficiently lowers the energy barrier for the formation of the *COOH intermediate, which is the rate-limiting step, efficiently enhancing the photocatalytic performance. This work lays the foundation for the development of atomically precise metal-cluster-based photocatalysts.     

Recent advances in carbon-based materials for electrochemical CO2 reduction reaction

The increase of atmospheric CO₂ concentration has caused many environmental issues. Electrochemical CO₂ reduction reaction（CO₂RR） has been considered as a promising strategy to mitigate these challenges. The electrocatalysts with a low overpotential, high Faradaic efficiency, and excellent selectivity are of great significance for the CO₂RR. Carbon-based materials including metal-free carbon catalysts and metal-based carbon catalysts have shown great p...     

Electrochemical Reduction of Carbon Dioxide to Ethanol: An Approach to Transforming Greenhouse Gas to Fuel Source

Converting carbon dioxide (CO₂) into high-value fuels or chemicals is considered as a promising way to utilize CO₂ and alleviate the excessive greenhouse gas emission. Among multiple catalysis approaches, electrochemical reduction of CO₂ to ethanol has an important prospect due to the high energy density and widely applications of ethanol. In recent years, many electrocatalysts for CO₂ reduce reaction (CO₂RR) have shown promising catalytic activity for ethanol production. In this review, we will introduce the recent progress in this field. The basic principles and electrochemical performances of CO₂RR are reviewed at first. Then, several categories of active electrocatalysts for CO₂RR to ethanol are summarized, including the discussion of reaction mechanism and catalytic sites. Finally, several possible strategies are proposed, providing guidance for future design and preparation of high-performance catalysts.     

Electrochemically Driven Cation Exchange Enables the Rational Design of Active CO2 Reduction Electrocatalysts

Metal oxides or sulfides are considered to be one of the most promising CO₂ reduction reaction (CO₂RR) precatalysts, owing to their electrochemical conversion in situ into highly active electrocatalytic species. However, further improvement of the performance requires new tools to gain fine control over the composition of the active species and its structural features [e.g., grain boundaries (GBs) and undercoordinated sites (USs)], directly from a predesigned template material. Herein, we describe a novel electrochemically driven cation exchange (ED‐CE) method that enables the conversion of a predesigned CoS₂ template into a CO₂RR catalyst, Cu₂S. By means of ED‐CE, the final Cu₂S catalyst inherits the original 3 D morphology of CoS₂, and preserves its high density of GBs. Additionally, the catalyst's phase structure, composition, and density of USs were precisely tuned, thus enabling rational design of active CO₂RR sites. The obtained Cu₂S catalyst achieved a CO₂‐to‐formate Faradaic efficiency of over 87 % and a record high activity (among reported Cu‐based catalysts). Hence, this study opens the way for utilization of ED‐CE reactions to design advanced electrocatalysts.     

Cu cluster embedded porous nanofibers for high-performance CO2 electroreduction

Metal-doped carbon materials, as one of the most important electrocatalytic catalysts for CO₂ reduction reaction (CO₂RR), have attracted increasing attention. Herein, a series of Cu cluster embedded highly porous nanofibers have been prepared through the carbonization of electro-spun MOF/PAN nanofibers. The obtained Cu cluster doped porous nanofibers possessed fibrous morphology, high porosity, conductivity, and uniformly dispersed Cu clusters, which could be applied as promising CO₂RR catalysts. Specifically, best of them, MCP-500 exhibited high catalytic performance for CO₂RR, in which the Faradaic efficiency of CO (FE_CO) was as high as 98% at ?0.8 V and maintained above 95% after 10 h continuous electrocatalysis. The high performance might be attributed to the synergistic effect of tremendously layered graphene skeleton and uniformly dispersed Cu clusters that could largely promote the electron conductivity, mass transfer and catalytic activity during the electrocatalytic CO₂RR process. This attempt will provide a new idea to design highly active CO₂RR electrocatalyst.     

Engineering a Copper Single-Atom Electron Bridge to Achieve Efficient Photocatalytic CO2 Conversion

Developing highly efficient and stable photocatalysts for the CO₂ reduction reaction (CO₂RR) remains a great challenge. We designed a Z-Scheme photocatalyst with N−Cu₁−S single-atom electron bridge (denoted as Cu-SAEB), which was used to mediate the CO₂RR. The production of CO and O₂ over Cu-SAEB is as high as 236.0 and 120.1 μmol g⁻¹ h⁻¹ in the absence of sacrificial agents, respectively, outperforming most previously reported photocatalysts. Notably, the as-designed Cu-SAEB is highly stable throughout 30 reaction cycles, totaling 300 h, owing to the strengthened contact interface of Cu-SAEB, and mediated by the N−Cu₁−S atomic structure. Experimental and theoretical calculations indicated that the SAEB greatly promoted the Z-scheme interfacial charge-transport process, thus leading to great enhancement of the photocatalytic CO₂RR of Cu-SAEB. This work represents a promising platform for the development of highly efficient and stable photocatalysts that have potential in CO₂ conversion applications.