地球化学模拟在高放废物地质处置中的应用与发展

随着核能事业的发展,高放废物的处理和处置问题日益突出.其中,研究高放废物在环境介质中的吸附、扩散和迁移行为是获取放射性核素对周围环境和人群健康影响的基础参数的最重要和最直接的途径.近年来,人们利用已有的实验数据及核素的基础热力学和动力学数据,附以相应的数学模型,建立了一些地球化学模拟软件,用于分析核素在地质介质中可能发生的连续性和长期性变化.目前,国内外常用的地球化学模拟软件有十多种.本文从热力学平衡计算原理、种态分布计算方法和表面配位模型假设等几个方面对地球化学模拟软件进行了简要介绍,对近年来地球化学模拟软件在核素种态分布计算和表面配位模型模拟两方面的应用进行了举例分析,并以Ca-U-CO3配合物为例,说明完备的热力学数据对地球化学模拟软件发展的重要性,以期促进我国地球化学模型的应用和发展.     

X射线吸收谱学在锕系环境放射化学中的应用

锕系环境放射化学对于核废料尤其是高放废物的安全处理和处置至关重要,同步辐射技术尤其是X射线吸收谱学在解析锕系元素在不同介质表面的配位结构方面可以发挥关键作用,对于理解锕系元素在环境介质中的迁移转化行为意义重大.本文综述了近年来国内外利用X射线吸收谱学研究锕系元素环境化学方面的最新进展,主要包括锕系核素在不同地质条件下的迁移和转化以及微生物对核素迁移的影响等方面.     

从高放废液中去除锕系元素的TRPO 流程发展三十年

放射性废物,尤其是高放废物的妥善处理处置是各国政府和民众非常重视的一个问题,也是影响核能可持续发展的关键因素之一。高放废液是后处理Purex流程排放出来的废液,它集中了乏燃料中95%以上的放射性,其中α放射性核素的存在决定了需要将其处置在地质处置库中与生物圈隔离10万年以上。“分离-嬗变”方法处理高放废液可以有效缩减地质处置库与生物圈隔离的时限。TRPO具有良好的物性、辐照稳定性和对三价、四价和六价锕系元素良好的萃取选择性。基于此,我国提出了从高放废液中分离锕系元素的TRPO流程。多次热验证实验和中间规模冷台架实验结果证明TRPO流程处理我国生产堆高放废液,可完全实现高放废液的非α化。TRPO流程具有我国自主知识产权,在我国生产堆高放废液和动力堆高放废液处理中都具有良好的应有前景。     

极低放射性废物填埋场土壤理化指标的测定

如何安全、经济、妥善地处理和处置核废物,成为核工业可持续发展所面临的重要问题之一[1~4]。目前,退役过程中产生的极低放废物的常用处置方法是就近选址进行填埋处置。那么填埋场场址地段的地球化学特征直接决定填埋场的安全性、可靠性[5]。以铀为例,在酸性条件下以UO22 形式存在,而pH值大于7时,会形成U2O52 ,UO2(OH)2,UO2(OH) 等水解聚合产物,使得铀既有吸附和交换作用,又有沉淀作用,会加速U的吸附[6,7]。同样,核素的化学形态同样也会受到氧化还原反应的影响。因此,查明极低放废物填埋场场址地段土壤理化性质,可为了解核素在土壤介…     

Fe（Ⅱ）-矿物对亚硒酸的还原作用

79Se是核反应过程中产生的长半衰期（T1/2=2.95×105年）裂片产物核素,具有化学和辐射双重毒性,是高放废物地质处置中重点关注的几个放射性核素之一.硒的溶液化学性质比较特殊,以高价态形式存在的硒酸和亚硒酸,几乎不受溶解度控制,并难以被黏土或花岗岩等处置库围岩介质所吸附,迁移性极强,而当其以低价态（0、–I、–II）形式存在时,易形成固体沉淀.因此将高价态的硒还原生成沉淀是阻滞79Se迁移的最主要方式.从另一方面讲,Fe（II）-矿物是自然界中普遍存在的具有还原性的物质.本文对近年来国内外在Fe（II）-矿物还原亚硒酸方面开展的研究工作进行了一个回顾,并从热力学的角度,对这些矿物还原亚硒酸的可行性及控制产物生成的因素进行了分析.     

放射性核素迁移研究的现状与进展

本文介绍了放射性核素迁移研究的方法、影响核素迁移的一些因素及一些重要核素迁移研究的现状与进展,对存在的一些问题及今后的发展方向进行了讨论。     

高校化学实验教学中产生的化学废物的回收及处理

针对高校化学实验教学中产生的不能直接排放的废物、废液,在大量工作的基础上归纳总结出对部分实验室化学废物的回收和处理方法,并有针对性地提出相应的长效运行措施。     

关于高校实验室化学废物的处置现状及其改进的思考

随着国家对高等教育和科研投入的增加,高校和科研院所在教学和科研水平方面得到极大的提升,但同时实验室化学废物量呈现爆炸式增长,由此带来的安全隐患和污染代价也同比例增加,已成为目前困扰高校发展的巨大难题。实验室化学废物社会处置能力的缺失或不足以及相关法律法规的不健全是制约这一问题解决的根本。本文结合国内实验室化学废物现状、境外实验室化学废物处置可资借鉴的经验,从科研实验室化学废物处置相关法律法规入手,提出一系列有关制度建设方案及危废处理方案的思考,为实验室化学废物处理建言献策。     

反应堆退役石墨中36Cl的分析

在反应堆退役中,为有效开展放射性石墨的处理,需对石墨中放射性核素进行测量。~(36)Cl是石墨中一种重要的放射性核素,其半衰期长、环境中易迁移,无法直接测量其活度。为建立满足反应堆退役石墨中~(36)Cl分析的方法,本文将堆退役石墨样品完全溶解后,再通过共沉淀和离子交换去除干扰核素,获得~(36)Cl待测液,然后用液闪测量~(36)Cl的活度。当石墨样品量为0.2g时,该方法的化学回收率为88.7%,最低可探测活度为67mBq·g~(-1),对主要干扰核素有较高的去除能力。该方法可用于反应堆退役石墨中~(36)Cl的分析。     

人造岩石固wx 包容锕系核素废物

研究了富钙钛锆石型和富烧绿石型两种人造岩石固化体包容锕系核素的配方设计和固化产品的鉴定评价,包括物理性能、抗浸出性能和耐辐照性能。采用了X射线衍射(XRD)、扫描电镜/能谱分析(SEM/EDS)和透射电镜/能谱分析(TEM/EDS)研究了矿相组合、元素分布和矿相化学组成等。研究表明,富钙钛锆石和富烧绿石型人造岩石都能很好地固化包容锕系核素废物。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.