Synthetic Co50Pt50/Ru/CoFe hard–soft trilayer in spin valves

The influence of deposition power and seedlayer on the properties of hard magnet Co₅₀Pt₅₀ was studied. Co₅₀Pt₅₀(/Co₉₀Fe₁₀)/Ru/Co₉₀Fe₁₀ trilayer was used as pining/pinned layer in spin valves. The influences of different hard layer, soft layer and free layer on exchange bias, interlayer coupling, and magnetoresistance (MR) ratio were studied. Weak antiferromagnetic interlayer coupling was obtained by adjusting the thickness of hard and soft layers. MR of a spin valve with structure Cr2/CoFe0.5/CoPt4/CoFe0.5/Ru0.8/CoFe2.2/Cu2.05/CoFe2.6/Cu1.1/Ta1 reached 10.68% (unit in nm), which is comparable to those of IrMn-based synthetic spin valves. The increment of the coercivity of the free layer is mainly due to the static magnetic interaction between the hard layer and the free layer.     

O2 plasma oxidation effect on magnetic properties of spin valves

The use of nano-oxide to improve the performance of spin valves has been extensively studied. But most of the investigations so far have been carried out on different samples. This may make some of the conclusions drawn from the experiments inconsistent because of the fluctuation in deposition conditions and device structures. In this work, the effect of nano-oxide on the properties of spin valves has been investigated through post-growth oxidation of the same sample in oxygen plasma for different rf powers and durations. The sample investigated was a bottom spin valve with the structure Si/SiO₂/Ta/NiFe/IrMn/CoFe/Cu/CoFe/Ta. A relative increase of 20% and 12% was obtained in the giant magnetoresistance (GMR) ratio of as-deposited and annealed samples, respectively. It was found that, at a fixed rf power, there is a peak of the GMR ratio as the oxidation time increases. A higher peak value of the GMR ratio was obtained for lower rf power, although the required oxidation time is longer. This result can be well understood by considering both the enhanced specularity at the insulator/metal interface and the loss of magnetic effective thickness of the free layer by the oxidation. Magnetic parameters such as the interlayer coupling field (H₀) and the coercivity of the free layer (H_cf) were also greatly influenced by the oxidation process. When only the Ta layer was oxidized, H₀ increases very slightly, and H_cf increases with the oxidation time. However, when the CoFe free layer was oxidized, a significant increase was found for H₀, and H_cf changes to decreasing. These results can be explained based on the Néel and RKKY coupling models. Received: 25 October 2001 / Accepted: 21 December 2001 / Published online: 3 June 2002     

Effect of Ta buffer and NiFe seed layers on pulsed-DC magnetron sputtered Ir20Mn80/Co90Fe10 exchange bias

A systematic investigation has been done on the correlation between texture, grain size evolution and magnetic properties in Ta/Ni₈₁Fe₁₉/Ir₂₀Mn₈₀/Co₉₀Fe₁₀/Ta exchange bias in dependence of Ta buffer and NiFe seed layer thickness in the range of 2-10 nm, deposited by pulsed DC magnetron sputtering technique. A strong dependence of 〈1 1 1〉 texture on the Ta/NiFe thicknesses was found, where the reducing and increasing texture was correlated with exchange bias field and unidirectional anisotropy energy constant at both NiFe/IrMn and IrMn/CoFe interfaces. However, a direct correlation between average grain size in IrMn and H_ex and H_c was not observed. L1₂ phase IrMn₃ could be formed by thickness optimization of Ta/NiFe layers by deposition at room temperature, for which the maximum exchange coupling parameters were achieved. We conclude finally that the coercivity is mainly influenced by texture induced interfacial effects at NiFe/IrMn/CoFe interfaces developing with Ta/NiFe thicknesses.     

Influence of temperature on thermal relaxation of exchange bias field in CoFe/Cu/CoFe/IrMn spin valve

A multilayered spin valve film with a structure of Ta(5 nm)/Co_(75)Fe_(25)(5 nm)/Cu(2.5 nm)/Co_(75)Fe_(25)(5 nm)/Ir_(20)Mn_(80)(12 nm)/Ta(8 nm) is prepared by the high-vacuum direct current(DC) magnetron sputtering. The effect of temperature on the spin valve structure and the magnetic properties are studied by x-ray diffraction(XRD), atomic force microscopy(AFM), and vibrating sample magnetometry. The effect of temperature on the exchange bias field thermomagnetic properties of multilayered spin valve is studied by the residence time of samples in a reverse saturation field. The results show that as the temperature increases, the Ir Mn(111) texture weakens, surface/interface roughness increases, and the exchange bias field decreases. Below 200℃, the exchange bias field decreases with the residence time increasing, and at the beginning of the negative saturation field, the exchange bias field Hex decreases first quickly and then slowly gradually. When the temperature is greater than 200℃, the exchange bias field is unchanged with the residence time increasing.     

一种非连续纳米氧化层自旋阀的显微结构研究

利用高分辨电子显微学方法(HREM)研究了纳米氧化层镜面反射自旋阀多层结构Ta(35nm)Ni80Fe20(2nm)Ir17Mn83(6nm)Co90Fe10(15nm)NOL1Co90Fe10(2nm)Cu(22nm)Co90Fe10(15nm)NOL2Ta(3nm).该自旋阀的巨磁电阻(GMR)效应高达15%,较无此镜面反射纳米氧化层(NOL)的自旋阀提高近1倍,同时交换偏置场亦有所增强.高分辨显微结构分析表明,介于钉扎层与被钉扎层之间的氧化层(NOL1)并未完全氧化,即除氧化过程生成的CoFe氧化物 关键词： 自旋阀 纳米氧化层 高分辨电子显微学 巨磁电阻效应     

Controlled fabrication of nano-scale double barrier magnetic tunnel junctions using focused ion beam milling method

The controlled fabrication method for nano-scale double barrier magnetic tunnel junctions (DBMTJs) with the layer structure of Ta(5)/Cu(10)/Ni₇₉Fe₂₁(5)/Ir₂₂Mn₇₈(12)/Co₆₀Fe₂₀B₂₀(4)/Al(1)–oxide/Co₆₀Fe₂₀B₂₀(6)/Al(1)–oxide/Co₆₀Fe₂₀B₂₀(4)/Ir₂₂Mn₇₈(12)/Ni₇₉Fe₂₁(5)/Ta(5) (thickness unit: nm) was used. This method involved depositing thin multi-layer stacks by sputtering system, and depositing a Pt nano-pillar using a focused ion beam which acted both as a top contact and as an etching mask. The advantages of this process over the traditional process using e-beam and optical lithography in that it involve only few processing steps, e.g. it does not involve any lift-off steps. In order to evaluate the nanofabrication techniques, the DBMTJs with the dimensions of 200 nm×400 nm, 200 nm×200 nm nano-scale were prepared and their R–H, I–V characteristics were measured.     

高磁电阻磁性隧道结的几种微制备方法研究

利用金属掩模法优化了制备磁性隧道结的实验和工艺条件，金属掩模的狭缝宽度为100 μm. 采用4 nm厚的Co₇₅Fe₂₅为铁磁电极和10或08 nm厚的铝氧化物 为势垒膜， 直接制备出了室温隧穿磁电阻（TMR）为30%—48％的磁性隧道结，其结构为Ta(5 nm)/Cu(25 nm)/Ni₇₉Fe₂₁(5 nm)/Ir₂₂Mn₇₈(10 nm)/ Co₇₅Fe₂₅ (4 nm)/Al(08 nm)-O/Co₇₅Fe₂₅(4 nm)/Ni₇₉Fe ₂₁(20 nm)/Ta(5 nm).同时，利用刻槽打孔法和去胶掀离法两种光刻技术并结合Ar离子束刻蚀及化学反应刻 蚀，制备出面积在4 μm×8 μm—20 μm×40 μm、具有室温高TMR和低电阻的高质量磁性 隧道结.300 ℃ 退火前后其室温TMR可分别达到22% 和50%.研究结果表明，采用光刻中的刻 槽打孔或去胶掀离工艺方法制备的小尺寸磁性隧道结，可用于研制磁动态随机存储器和磁读 出头及其他传感器件的磁敏单元. 关键词： 磁性隧道结 隧穿磁电阻 金属掩模法 光刻法     

Pt插层对铁磁/反铁磁界面交换耦合的影响

在铁磁层(FM)/反铁磁层(FeMn)耦合体系中插入Pt 插层或对靠近FM/FeMn界面处的FeMn掺杂Pt元素,研究了体系的交换偏置场 H_ex及矫顽力H_c随Pt插层深度 d_Pt与Pt掺杂层厚度t_PtFeMn的变化关系. 实验结果表明,引入Pt插层后NiFe/FeMn(d_Pt)/Pt/FeMn体系的未补偿磁矩(UCS)的数量得到很大的提高,从而对H_ex与H_c 起到增强的作用; 同时, 从实验结果可以推测FeMn层内部UCS的分布深度约为1.3 nm. 另外,对靠近FM/FeMn界面处的FeMn掺杂Pt元素,发现掺入Pt元素后体系的H_ex 得到有效增强, 这是因为掺入Pt元素后体系UCS的数量也得到很大的提高.     

X-ray photoelectron spectroscopy study of magnetic films

Ta/NiO_x/Ni₈₁Fe₁₉/Ta films were prepared by rf reactive and dc magnetron sputtering. The exchange coupling field H_ex and the coercivity H_c of NiO_x/Ni₈₁Fe₁₉ as a function of the ratio of Ar to O₂ during the deposition process were studied. The composition and the chemical states in the interface region of NiO_x/NiFe were also investigated using X-ray photoelectron spectroscopy (XPS) and the peak decomposition technique. The results show that the ratio of Ar to O₂ has a great effect on the chemical states of nickel in NiO_x films. The exchange coupling field H_ex and the coercivity H_c of Ta/NiO_x/Ni₈₁Fe₁₉/Ta are thus seriously affected. XPS is shown to be a powerful tool for characterizing magnetic films. Received: 18 July 2001 / Accepted: 21 December 2001 / Published online: 3 June 2002 RID="*" ID="*"Corresponding author. Fax: +86-010/6232-7283, E-mail: guanghua_yu@263.net     

Magnetic,structural and electrical properties of ordered and disordered Co50Fe50 films

Co₅₀Fe₅₀ films with thickness varying from 100 to 500 Å were deposited on a glass substrate by sputtering process, respectively. Two kinds of CoFe films were studied: one was the as-deposited film, and the other the annealed film. The annealing procedure was to keep the films at 400 °C for 5 h in a vacuum of 5×10⁻⁶ mbar. From the X-ray study, we find that the as-deposited film prefers the CoFe(1 1 0) orientation. Moreover, the body-centered cubic (bcc) CoFe(1 1 0) line is split into two peaks: one corresponding to the ordered body-centered tetragonal (bct) phase, and the other, the disordered bcc phase. After annealing, the peak intensity of the ordered bct phase becomes much stronger, while that of the disordered bcc phase disappears. The annealing has also caused the ordered CoFe(2 0 0) line to appear. When the amount of the ordered bct phase in Co₅₀Fe₅₀ is increased, the saturation magnetization (M_s) and coercivity (H_c) become larger, but the electrical resistivity (ρ) decreases. From the temperature coefficient of resistance (TCR) measurement, we learn that the bct grains in the CoFe film start to grow at temperature 82 °C.     

Influence of Interface Structure of Co/Cu （100） Superlattices on Electronic Structure and Giant Magnetoresistance

Electronic structures and magnetoresistance （MR） of Co3 Cu5 and Co3 Cur models as well as their interface atom exchange models Co2 CuCoCu4 and Co2 CuCoCu6 are investigated by the tlrst-principles pseudopotential planewave method based on density functional theory. Charge transfer, magnetic moment, density of states, spin asymmetry factor, and MR ratio are discussed. The results show that the values of charge transfer and spin asymmetry factor at the Fermi level of Co layers are closely related to the neighbouring background of the Co layer. The Co layer with two sides adjacent to the Cu layer would transfer more charge to the Cu layer than other neighbouring background and have the largest spin asymmetry factor at the Fermi level. The Co layer with two neighbouring Co layers （interior Co） would gain a little charge and have the smallest spin asymmetry factor at the Fermi level. Two-current model is used to evaluate the MR ratio of Co2CuCoCu4 （Co2CuCoCu6） to be larger than that of Co3 Cu5 （Co3 CUT）, which can be explained by the charge transfer and spin asymmetry factor.     

Inverse TMR in a nominally symmetric CoFe/AlOx/CoFe junction induced by interfacial Fe3O4 investigated by STEM-EELS

We have found inverse tunneling magnetoresistance (TMR) with a non-symmetric bias voltage dependence in a nominally symmetric Si (001)/Ag/CoFe/AlO_x/CoFe/IrMn/Ag magnetic tunnel junction after field cooling. The O K edge fine structure extracted from electron energy loss spectroscopy spectrum images taken at the interfaces of junctions with inverse TMR shows a thin, discontinuous Fe₃O₄ layer at the CoFe/AlO_x interfaces. The Fe L_2,3 edge core level shifts are also consistent with those of Fe₃O₄. We find no Fe₃O₄ layer in junctions with normal TMR. We believe this Fe₃O₄ layer is responsible for the inverse TMR.     

High temperature magnetoresistance in (Co,CoFe and NiFe)/Cu/CoFe/IrMn spin-valves

The MR characteristics of temperature variations ranging from room temperature to 570 K for IrMn spin-valves which consist of free layer Co, CoFe and NiFe were studied. Co-SV had the highest MR value in all temperature ranges among them and even at 510 K the MR ratio held more than half of room temperature value. Whereas CoFe-SV had a slightly higher MR than NiFe-SV below 450 K, above 450 K CoFe-SV showed a lower MR ratio than NiFe-SV. MR loops of large coercivity such as CoFe free magnetic layer collapsed in the lower elevated temperature compared to NiFe and Co. Small coercivity of the free magnetic layer would be preferable to spin-valves.     

Annealing effect of NiO/Co90Fe10 thin films: From bilayer to nanocomposite

Exchange-biased bilayers are widely used in the pinned layers of spintronic devices. While magnetic field annealing (MFA) was routinely engaged during the fabrication of these devices, the annealing effect of NiO/CoFe bilayers is not yet reported. In this paper, the transition from NiO/Co₉₀Fe₁₀ bilayer to nanocomposite single layer was observed through rapid thermal annealing at different temperatures under magnetic field. The as-deposited and low-temperature (<623 K) annealed samples had rock salt (NiO) and face center cubic (Co₉₀Fe₁₀) structures. On the other hand, annealing at 623 K and 673 K resulted in nanocomposite single layers composed of oxides (matrix) and alloys (precipitate), due to grain boundary oxidization and strong interdiffusion in the NiO/CoFe and CoFe/SiO₂ interfaces. The structural transition was accompanied by the reduction of grain sizes, re-ordering of crystallites, incensement of roughness, and reduction of Ni²⁺. When measured at room temperature, the bilayers exhibited soft magnetism with small room-temperature coercivity. The nanocomposite layers exhibited an enhanced coercivity due to the changes in the magnetization reversal mechanism by pinning from the oxides. At 10 K, the increased antiferromagnetic anisotropy in the NiO resulted in enhanced coercivity and exchange bias in the bilayers. The nanocomposites exhibited weaker exchange bias compared with the bilayers due to frustrated interfacial spins. This investigation on how the magnetic properties of exchange-biased bilayers are influenced by magnetic RTA provides insights into controlling the magnetization reversal properties of thin films.     

Superlattice CoCrPt/Ru/CoFe structure fabricated by pulsed laser deposition

The synthetic antiferromagnets (SAF) have been used in spin-valve sensor in data storage industry [1]. We report a new hard/Ru/soft sandwich structure (SHBL) fabricated by pulsed lased deposition to replace current single layer structure for information recording application. SHBL consists of two magnetic layers separated by thin nonmagnetic layers, typically with Ru layers of 0.7-1.2 nm, through which antiferromagnetic coupling is induced. Varying the relative thickness of the magnetic layers, the spacer layers, and the type of magnetic materials can alter magnetic properties of CoCrPt/Ru/CoFe superlattice. The coercivity H_c and grain size of magnetic layer is also dependent on the laser fluence. High laser fluence results in both small grain size and high H_c. The observed phenomena are related to high quenching and deposition rates during PLD at high fluence, resulting in more pronounced phase segregation.     

Dual behaviors of magnetic CoxFe1−x (0≤x≤1) nanowires embedded in nanoporous with different diameters

Co_xFe_1−x nanowire arrays with various diameters and different composition were fabricated by ac electrodeposition using porous alumina template. Coercivity along the easy axis reaches to a maximum at 2330 Oe, for Co_xFe_1−x nanowires containing about 40 at% Co. The crystalline structure of the nanowires was concentration-independent and shows a bcc structure. The critical diameter for transition from coherent rotation to curling mode is 35 nm for CoFe containing less than 40 at% Co while it is 30 nm for those with more than 40 at% Co. Optimizing the magnetic properties of CoFe with different Co content was seen to be dependent on the diameter of nanowires. For 25 nm diameter, the optimum was shown below 50 at% Co while it was seen above 50 at% for nanowires with 50 nm diameter. The angular dependence of the coercivity with nanowires diameter were also studied.     

Magnetic Behaviour and Heating Effect of Fe3O4 Ferrofluids Composed of Monodisperse Nanoparticles

Fe3O4 ferrofluids containing monodisperse Fe3O4 nanoparticles with different diameters of 8, 12, 16 and 18nm are prepared by using high-temperature solution phase reaction. The particles have single crystal structures with narrow size distributions. At room temperature, the 8-nm ferrofluid shows superparamagnetic behaviour, whereas the others display hysteresis properties and the coercivity increases with the increasing particle size. The spin glass-like behaviour and cusps near 190K are observed on all ferrofluids according to the temperature variation of field-cooled （FC） and zero-field-cooled （ZFC） magnetization measurements. The cusps are found to be associated with the freezing point of the solvent. As a comparison, the ferrofluids are dried and the FC and ZFC magnetization curves of powdery samples are also investigated. It is found that the blocking temperatures for the powdery samples are higher than those for their corresponding ferrofluids. Moreover, the size dependent heating effect of the ferrofluids is also investigated in ac magnetic field with a frequency of 55 kHz and amplitude of 200 Oe.     

Antiferromagnet IrMn thickness dependence in exchange-biased perpendicular magnetic anisotropy based on CoFe/Pt/CoFe/[IrMn(tIrMn)] multilayers

The effect of the antiferromagnetic IrMn thickness upon the magnetic properties of CoFe/Pt/CoFe/[IrMn(t_IrMn)] multilayers is studied. An oscillatory interlayer coupling (IEC) has been shown in pinned CoFe/Pt(t_Pt)/CoFe/IrMn multilayers with perpendicular anisotropy. The period of oscillation corresponds to about 2 monolayers of Pt. The oscillatory behavior of IEC depends on the nonmagnetic metallic Pt thickness and is thought to be related to the antiferromagnetic ordering induced by the IrMn layer. From the extraordinary Hall voltage amplitude (EHA) curves as function of IrMn thickness, we report that the oscillation dependence of IEC for the [CoFe/Pt/CoFe] multilayer system induced by IrMn with spacer-layer thickness is a important features of perpendicular exchange biased system.     

双合成反铁磁结构及其对自旋阀巨磁电阻效应的影响

用直流磁控溅射方法制备了双合成反铁磁结构Co₉₀Fe₁₀(5 nm)/Ru(x nm)/Co₉₀Fe₁₀(3 nm)/Ru(y nm)/Co₉₀Fe₁₀(5 nm)(x=0.45,0.45,1.00; y=0.45,1.00,1.00)的系列样品,并对样品的性能及其作为钉扎层对自旋阀巨磁电阻(GMR)效应的影响进行了研究 关键词： 双合成反铁磁 自旋阀 巨磁电阻