无溶剂法合成4,6,10,12,16,18,22,24-八羟基-2,8,14,20-四-{(联三-(3-苯基-2,4,8,10-四氧杂螺[5.5]十一烷基))-(4-(2-(4,6,10,12,16,18,22,24-八羟基)杯芳基)苯基)}杯芳烃螺环树形大分子化合物

以对苯二甲醛、丙二腈为原料, 合成对苯二甲醛单缩醛, 再与季戊四醇反应得到了2,4,8,10-四氧杂-2,9-二(4-二氰基乙烯基苯基)螺[5.5]十一烷, 经水解, 与丙二腈反应, 制备了中间体2,4,8,10-四氧杂-2-(4-二氰基乙烯基苯基)-9-(4-甲酰基苯基)螺[5.5]十一烷(3). 用乙酸酐保护的对苯二甲醛单缩醛与间苯二酚反应, 制备了杯芳烯中间体(6). 将化合物6与过量的化合物3反应, 得到中间体7, 经水解后与过量的化合物6反应, 得到了4,6,10,12,16,18,22,24-八羟基-2,8,14,20-四-{(联三-(3-苯基-2,4,8,10-四氧杂螺[5.5]十一烷基))-(4-(2-(4,6,10,12,16,18,22,24-八羟基)杯芳基)苯基)}杯芳烃螺环树形大分子化合物(9). 总收率为12.7%. 产物结构用IR, 1H NMR, 13C NMR, MS 和元素分析进行了表征, 对影响反应的因素进行了讨论.     

含硫环状膦酸酯衍生物的合成及其热性能

以三氯化磷、苯和硫粉为原料,用离子液体法绿色合成了硫代苯基膦酰二氯(3);3与季戊四醇或新戊二醇反应合成了两种新型含硫磷系阻燃剂--2,4,8,10-四氧杂-3,9-二磷杂螺环[5.5]十一烷-3,9-二硫-3,9-二苯(1)或5,5-二甲基-2-苯基-2-硫代-1,3-二氧-2-磷杂环己烷(2).用~1H NMR,IR,DSC和TG对其结构和性能进行了表征.结果表明,1具有良好的成炭性和热稳定性.     

螺环三代树形大分子化合物的合成

以对苯二甲醛单缩醛与季戊四醇反应得到了2,4,8,10-四氧杂-2,9-二(4-二氰基乙烯基苯基)螺[5.5]十一烷(1), 经水解, 再与丙二腈反应, 制备了中间体2,4,8,10-四氧杂-2-(4-二氰基乙烯基苯基)-9-(4-甲酰基苯基)螺[5.5]十一烷(3). 8-(4-氧代环己烷基)-1,4-二氧杂螺[4.5]癸烷经芳构化形成2,6,10-三-(4-氧代环己烷基)-1,2,3,4,5,6,7,8,9,10,11,12-十二氢苯并[l]菲(4), 再与甲醛进行羟醛缩合, 制成了2,6,10-三-(4-羟基-3,3,5,5-四羟甲基环己烷基)-1,2,3,4,5,6,7,8,9,10,11,12-十二氢苯并[l]菲(5), 将5与过量的3反应, 得到了目标树形大分子化合物2,6,10-三-{15-(3,11-二(-4-(3-((9-(4-二氰基乙烯基)苯基)2,4,8,10-四氧杂螺[5.5]十一烷基)))-7-羟基-二螺[5.1.5.3]十六烷基)}-1,2,3,4,5,6,7,8,9,10,11,12-十二氢苯并[l]菲(6), 收率为18.1%. 产品结构经IR, 1H NMR, MS和元素分析进行了表征. 对影响反应的因素进行讨论.     

阻燃中间体3,9-二氯-2,4,8,10-四氧代-3,9-二磷杂螺[5.5]十一烷的合成

以PCl3和季戊四醇为原料合成了中间体3,9$C二氯-2,4,8,10$C四氧代-3,9-二磷杂螺[5.5]十一烷,产率达99.6%.对反应条件进行了优化,最佳反应条件为:PCl3和季戊四醇摩尔比为2.5∶1,反应温度80℃,反应时间1.5h.     

无溶剂法合成杯[4]芳烯星形化合物

以对苯二甲醛、乙酸酐为原料合成对苯二甲醛单缩醛, 接着与间苯二酚反应, 制备了含醛基杯[4]芳烯. 利用季戊四醇与含醛基杯[4]芳烯反应, 进而再与3-[4-(2,5-二氧杂环戊基)苯基]-9-[4-二(甲羰氧基)甲基苯基]-2,4,8,10-四氧杂螺环[5.5]十一烷反应, 合成了杯[4]芳烯星形化合物, 收率为65.2%. 产品结构经 IR, ¹H NMR, MS 和元素分析进行了表征.     

聚缩醛螺胞二醚的合成及结构表征

在I₂催化剂的作用下, 利用苯甲醛与季戊四醇反应, 制备了聚缩醛螺胞二醚的模型化合物3,9-二苯基-2,4,8,10-四氧杂螺[5.5]十一烷(1). 在此基础上, 利用1,3-苯二甲醛与不同摩尔比的季戊四醇合成了化合物1,3-二(2,6-二氧杂-4,4-二羟甲基环己基)苯(2)和2,4,8,10-四氧杂-3,9-二(3'-甲酰基苯基)螺[5.5]十一烷(3). 化合物2与化合物3反应, 制成标题化合物聚缩醛螺胞二醚4, 收率为95.4%. 用FTIR, ¹H NMR对化合物1～4的结构进行了表征. 发现在含有手性轴化合物1, 3, 4的¹H NMR谱中, 4个亚甲基中的8个氢原子裂分为4组双峰, 而不含有手性轴化合物中的4个亚甲基中的8个氢原子不裂分, 是个单峰. 这种不同不是由于化合物中刚性环所致, 而是由于有无手性轴造成的.     

无溶剂、无催化剂有效合成二苯基-2,4-氧杂-8,10-氮杂螺[5.5]十一烷-1,5,9-三酮衍生物

在无溶剂和无催化剂条件下,以芳香醛、2,2-亚丁基-1,3-二噁烷-4,6-二酮或2,2-亚戊基-1,3-二噁烷-4,6-二酮和尿素为原料,经三组分反应合成了12种二苯基-2,4-氧杂-8,10-氮杂螺[5.5]十一烷-1,5,9-三酮衍生物.反应无溶剂污染,反应条件温和,收率为49%~63%.此外,还讨论了反应速度与取代基的关系,探讨了可能的缩合反应机理,并应用~1H NMR、~(13)C NMR、IR及ESI-MS等技术手段确定了产品的结构.     

氧杂三螺环化合物的简便合成

以环酮和季戊四醇为原料,磷钨酸为催化剂,在甲苯中回流分水反应合成了系列氧杂三螺环化合物（3a~3h）,其中5,9,14,17-四氧杂三螺［3.2.2.3¹⁰.2⁷.2⁴］十七烷（3a）和7,11,18,21-氧杂-3,15-二硫杂三螺［5.2.2.5¹².2⁹.2⁶］二十一烷（3f）为新化合物,其结构经¹H NMR, ¹³C NMR和HR-MS(ESI)表征。并以3c的合成为模板反应,对反应条件进行了优化。     

α,β,γ,δ-四-{4-13-(9-(4-(3-(9-(4-(2-(5,5-二酰氧基甲基-1,3-二噁烷基))))苯基-2,4,8,10-四氧杂螺[5.5]十一烷基)))苯基-2,4,8,10-四氧杂螺[5.5]十一烷基]}苯基卟啉星形化合物的合成

以对苯二甲醛、丙二腈、季戊四醇和毗咯为原料,合成了含有螺环结构单元的中间体3-[4-(2,2-二氰基)乙烯基]苯基-9-(4-甲酰基)苯基-2,4,8,10-四氧杂螺[5.5]十一烷(3)和α,β,γ,δ-四-(4-甲酰基苯基)卟啉(4).4与过量的季戊四醇反应,得到α,β,γ,δ-四-{4-[2-(5,5-二羟甲基-1,3-二噁烷基)]}苯基卟啉(5),5与3的反应产物经10%NaOH处理后,再与过量的季戊四醇反应,得到α,β,γ,δ-四-{4-[3-(9-(4-(3-(9-(4-(2-(5,5-二羟甲基-1,3-二噁烷基))))苯基一2,4,8,10.四氧杂螺[5.5]十一烷基)))苯基-2,4,8,10-四氧杂螺[5.5]十一烷基]]苯基卟啉(6),6与乙酐、丙酐、苯甲酰氯反应,得到α,β,γ,δ-四-{4-[3-(9-(4-(3-(9-(4-(2-(5,5-二乙酰氧基甲基-1,3-二噁烷基))))苯基-2,4,8,10-四氧杂螺[5.5]十一烷基)))苯基-2,4,8,10-四氧杂螺[5.5]十一烷基])苯基卟啉(7),α,β,γ,δ-四-{4-[3-(9-(4-(3-(9-(4-(2-(5,5-二丙酰氧基甲基-1,3-二噁烷基))))苯基.2,4,8,10-四氧杂螺[5.5]十一烷基)))苯基-2,4,8,10-四氧杂螺[5.5]十一烷基]}苯基卟啉(8)和α,β,γ,δ-四-{4-[3-(9-(4-(3-(9-(4-(2-(5,5-二苯甲酰氧基甲基-1,3-二噁烷基))))苯基-2,4,8,10-四氧杂螺[5.5]十一烷基)))苯基-2,4,8,10-四氧杂螺[5.5]十一烷基]}苯基卟啉(9)等三种卟啉星形化合物.中间体1～6和星形化合物7～9均进行了IR,1H NMR,MS和元素分析等结构表征.对影响反应的诸因素进行了讨论.     

2,4,8,10-四氧杂-3,9-二磷杂螺环[5.5]十一烷-3,9-二氧-3,9-二取代苯甲醛腙的合成及其阻燃性能

以季戊四醇、三氯氧磷为原料合成了富含酸源(磷)、碳源的氯化螺环磷酸酯(SPDPC),再将其与水合肼、取代苯甲醛反应,合成了系列化合物2,4,8,10-四氧杂-3,9-二磷杂螺环[5.5]十一烷-3,9-二氧-3,9-二取代苯甲醛腙,利用元素分析、FTIR、1H NMR和MS测试技术对其结构进行了表征。目标化合物分子结构对称性高、分子量较大、含较多芳构型碳和磷杂环碳,热重(TG)和差热(DSC)分析结果表明,具有较高的热稳定性。将这些化合物添加于环氧树脂(E-44)中进行水平燃烧实验,当添加质量分数为10%时,样条燃烧长度在10~20 mm之间,均具有很好的自熄效果;同时,LO I达到28.7%左右,有较好的阻燃性能。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.