有机电致显色材料

本文介绍有机电致显色材料的研究进展,并简要讨论电致显色器的结构设计。按材料结构可大致分为氧化还原化合物,金属螯合物和导电聚合物三类。     

导电聚合物的电化学制备和电化学性质研究——中国科学院有机固体重点实验室导电聚合物电化学研究工作简介(I)

简要介绍本研究组自上世纪80年代以来在导电聚合物的电化学制备和电化学性质研究中取得的一些主要成果,包括吡咯电化学聚合条件的影响、电化学聚合反应机理及其反应动力学、导电聚吡咯的两种掺杂结构及其两步电化学氧化还原过程和电化学过氧化的机理、导电聚苯胺的电化学性质、导电聚合物稳定性的电化学解释等等.     

导电聚合物的电化学制备和电化学性质研究--中国科学院有机固体重点实验室导电聚合物电化学研究工作简介(Ⅰ)

简要介绍本研究组自上世纪80年代以来在导电聚合物的电化学制备和电化学性质研究中取得的一些主要成果,包括吡咯电化学聚合条件的影响、电化学聚合反应机理及其反应动力学、导电聚吡咯的两种掺杂结构及其两步电化学氧化还原过程和电化学过氧化的机理、导电聚苯胺的电化学性质、导电聚合物稳定性的电化学解释等等．     

聚丁基噻吩的合成及性能

用化学聚合方法合成了聚丁基噻吩导电材料,并研究了不同的聚合条件对聚合物性能的影响。聚丁基噻吩导电材料具有较好的稳定性和加工性,其掺杂态的导电率可达到10s/cm。     

导电聚合物

导电聚合物是20世纪70年代发展起来的一个研究领域,因其诱人的应用前景受到广泛重视,本文介绍了导电聚合物的发展和发展历史,综述了导电聚合物的结构和掺杂特征,制造方法,电导和电化学特性及其本征态共轭聚合物的光电特性,对导电聚合物当前的研究热点和应用前景进行了讨论。     

过渡金属一取代Keggin结构钼磷酸盐掺杂的聚吡咯的制备、表征与导电性研究

０引言有机高分子－多酸导电聚合物是８０年代末兴起的一类新型有机－无机杂化材料。由于它兼有无机组分和有机聚合物基块的性能，并能衍生出新的导电性、光学性、耐摩擦、力学性能、功能梯度等，它现已成为材料科学和化学科学研究的前沿课题之一犤１犦。多酸是一类含有氧桥的多核配合物，具有强酸性、强氧化性、优良的催化活性、光致变色、电致变色性及高质子导电性等，可作为构建有机－无机杂化材料的基块犤２，３犦。聚吡咯是一类有机高分子，其合成简便、空气稳定性好、易于掺杂，通过掺杂可形成高电导率的高分子材料。若将多酸掺杂聚吡…     

导电聚合物基电致变色器件的研究进展

导电聚合物作为电致变色活性材料是目前最有应用前景的智能材料之一。本文概述了电致变色器件的基本结构和导电聚合物的电致变色机理,着重介绍了多种导电聚合物基电致变色器件的特点、组成及制备,并展望了未来电致变色器件的发展及应用趋势。     

导电性聚西佛碱的研究——Ⅱ.含硫聚西佛碱的掺杂及掺杂材料性能

共轭型含硫聚西佛碱是一新颖聚合物,本征导电率为3.4×10~(-11)S/cm,当该聚合物以碘、溴、五氯化锑和萘钠等掺杂后,导电性可进一步提高。碘掺杂该聚合物后导电性可达10~(-3)S/cm,且具有良好的耐候稳定性和高掺杂度特点。研究了掺杂材料的耐温性及各种试制对其导电性的影响。     

聚并苯二次电池的研究

聚乙炔在电解质中能进行电化学可逆的离子掺杂和脱掺杂,以聚乙炔膜作为电极的活性物质,用PVDF、LiClO_4-PC薄膜作为电解质,制作了可充式全塑电池,但由于聚乙炔在空气中稳定性差,电池的放电性能还不理想,目前,除聚苯胺电池在日本已有商品外,其它几种聚合物电池还都处于实验室研究开发阶段,用聚并苯半导体材料分别为正负极制做的全塑电池,自放电小,循环寿命可达3000次,是有实用价值的聚合物二次电池之一,前文对酚醛树脂的热解过程、产物结构、电学性质及导电机制等进行了研究,本文研究了用聚并苯材料做锂二次电池的正极活性物质、高氯酸锂(溶解在碳酸丙烯酯中,1 mol/L)为电解质的二次电池性能。     

从导电聚吡咯到共轭聚合物光伏材料——我在中科院化学所30年共轭高分子研究历程

本文简要回顾了本人在中科院化学所30年的研究历程,重点介绍了在共轭高分子(包括导电聚吡咯电化学、聚合物发光电化学池(LEC)和共轭聚合物给体光伏材料)方面的研究成果。在导电聚吡咯电化学方面,对导电聚吡咯的电化学制备和电化学性质进行了深入研究,阐明了各种电化学聚合条件对制备的导电聚吡咯电导和力学强度等的影响,发现电解液溶剂给电子性(Donor number)对吡咯电化学聚合制备的导电聚吡咯电导的影响:溶剂Donor number越小制备的导电聚吡咯电导越高;使用非离子表面活性剂添加剂在水溶液中制备出表面非常光滑和高力学强度的导电聚吡咯薄膜;对于吡咯电化学聚合提出了电解液阴离子参与的阳离子自由基聚合机理,并推到出吡咯电化学聚合反应的动力学方程;发现在NaNO3水溶液中电化学聚合制备的导电聚吡咯除存在主链氧化、对阴离子掺杂结构外,还存在质子酸掺杂结构;阐明了导电聚吡咯在水溶液中电化学还原和再氧化的机理及其电化学过程的可逆性和稳定性,以及导电聚吡咯在有机电解液中特殊的第一次还原和再氧化的机理。在LEC方面,通过交流阻抗法确认了LEC的电化学掺杂机理和p-i-n结构,合成了多种适用于LEC的主链带离子导电单元的兼具离子导电性的发光嵌段共聚物,避免了LEC活性层中存在的发光聚合物和离子导电聚合物的分相问题;使用离子液体作为电解质制备了室温准冷冻p-i-n结LEC,改善了LEC的电致发光性能。在共轭聚合物给体光伏材料方面,我们提出了通过共轭侧链来拓宽聚合物吸收和提高空穴迁移率的分子设计思想,设计和合成了一系列带共轭侧链的二维共轭聚噻吩衍生物以及基于二噻吩取代苯并二噻吩的窄带隙高效二维共轭聚合物给体光伏材料。我们使用烷硫基取代进一步降低了这类二维共轭聚合物的HOMO能级从而进一步提高了其光伏性能。最后介绍了本组二维共轭聚合物给体光伏材料在非富勒烯聚合物太阳能电池方面的最新研究进展。     

高能球磨法固相掺杂制备樟脑磺酸掺杂聚苯胺

通过高能球磨方法引发樟脑磺酸(CSA)对本征态聚苯胺(PANI)的固相掺杂反应, 制备了樟脑磺酸掺杂聚苯胺(PANI-CSA)粉末. 采用SEM, XRD, FT-IR等分析方法对所得的PANI-CSA进行了形貌和结构表征, 采用四点探针法对电导率进行了测定. FT-IR图谱的变化反映了聚苯胺的质子化过程, 而XRD谱图表明, 聚苯胺分子链在外力诱导下形成了有利于电荷传导的取向排列. 系统地研究了球磨时间对掺杂率和电导率的影响规律. 结果表明, 固相掺杂具有较高的掺杂速率, 其电导率和掺杂率均随球磨时间先增大后减小, 其最高电导率可达到3.25 S/cm, 对应掺杂率为0.31.     

The effects of oxygen co‐doping on structural,magnetic and optical properties of Mn‐doped GaN

The GaMnN and GaMnN: O films were obtained by annealing at different NH₃ flow rates. When the NH₃ flow rate was decreased to 20 sccm, the oxygen was co‐doped into GaMnN film and substituted the few host atoms, which were confirmed by the X‐ray Photoelectron Spectra. Moreover, the oxygen co‐doping in GaMnN film drastically enhanced the gain of the ferromagnetic (FM) state but oxygen as shallow donor in GaN offers little carriers. Hence, the enhanced FM state is not due to increase of carrier concentration. On optical properties, the oxygen co‐doping in GaMnN film will suppress the blue luminescence centered near 2.8 eV and make a blue shift of the photoluminescence spectra. Copyright © 2013 John Wiley & Sons, Ltd.     

Research on synthesis and conductivity of ferrocenyl Schiff base and its salt

Ferrocenyl Schiff base was synthesized through the condensation of ferrocenecarboxaldehyde and p‐phenylenediamine under neutral conditions, and then a new interesting category of organometallic charge transfer complex was obtained by the doping of ferrocenyl Schiff base with Fe³⁺, Al³⁺ and Ti³⁺ salts. The effects of the dosage of doping agent and doping temperature on the room‐temperature electric conductivity of samples were discussed; in addition, the temperature dependence of the electric conductivity of samples was studied, their structures and compositions were characterized by ¹H‐NMR spectra, infrared spectra, ultraviolet spectra and an electron probe X‐ray microanalyser. The results showed that the electric conductivity of sample can increase 4–5 orders of magnitude after doping with a metallic salt, and the electric conductivity has a positive temperature coefficient effect. The electrical activation energies of the complexes in the range 0.09–1.54 eV were calculated from Arrhenius plots, indicating their favourable semiconducting behaviour. Copyright © 2006 John Wiley & Sons, Ltd.     

Mo掺杂对纳米TiO2结构和活性的影响

利用Mo6 的掺杂在TiO2中引入缺陷,从而扩大TiO2催化剂的光谱响应范围。运用UV-Vis、XRD、XPS、TG-DTA等测试技术考察了钼离子掺杂浓度对于TiO2光催化剂吸收光谱范围、晶型、晶胞和晶粒的影响,分析了钼进入TiO2品格的方式、价态和掺杂催化剂在热处理过程中发生的物理和化学变化。以亚甲蓝溶液的光催化降解为模型反应,考察了掺杂量对这种新型光催化剂的光催化活性的影响。结果表明,Mo6 可进入TiO2晶格中形成杂质缺陷,引起TiO2品格膨胀,Mo6 的掺杂量影响TiO2晶粒尺寸和晶相转化。Mo6 掺杂的质量分数为4．5％时,样品的吸收带边可达460 nm,对40 mg/L亚甲蓝反应2 h的降解率为58．3％,矿化率为52．5%。而Mo6 的掺杂质量分数为3．0％和6．0％时,形成的TiO2晶粒尺寸较小,TiO2晶粒中锐钛矿相与金红石相的比例接近4:1时,对亚甲蓝降解率分别为56．6％和52．0％,矿化率分别为49．2％和44．2％。     

Comparative studies of solid‐state synthesized poly(o‐methoxyaniline) and poly (o‐toluidine)

Poly(o‐methoxyaniline) (POMA) and poly(o‐toluidine) (POT) salts doped with different acids (methanesulphonic acid (MeSA), trifluoroacetic acid (TFA), and hydrochloric acid (HCl)) were synthesized by using solid‐state polymerization method. The polymers were characterized by Fourier transform infrared (FTIR) spectra, ultraviolet–visible (UV–Vis) spectrometry, X‐ray diffraction (XRD), cyclic voltammetry (CV), and conductivity measurements. Transmission electron microscopy (TEM) was done to study the morphologies of POMA and POT salts. The FTIR and UV‐Vis absorption spectra revealed that the reduced phase was predominant in POMA salts, and the pernigraniline phase was predominant in POT salts. It was found that POMA salts displayed higher doping level and conductivity. In contrast, POT salts were lower at doping levels and conductivity. In accordance with these results, the electrochemical activity was also found to be lower in POT salts. The XRD patterns showed that the POMA salts displayed higher crystallinity than POT salts. The results from TEM revealed that the morphologies of POMA salts were different from those of POT salts. Copyright © 2008 John Wiley & Sons, Ltd.     

ZIF-67衍生的离子掺杂材料制备及电催化性能研究进展

钴基沸石咪唑酯骨架材料(ZIFs)结构和功能的多样化使其在电化学领域得到了广泛应用。然而,ZIF-67的低固有电导率和容易自聚集的性质,通常会导致高过电位。因此,有必要通过其他离子掺杂进行优化,以提高ZIF-67衍生物的电催化性能。本文概述了ZIF-67的合成及其析氧性能,总结了常见的通过离子掺杂提高ZIF-67析氧性能的方法,并梳理了其在催化电解水析氧方面的应用。最后对ZIF-67及其衍生物的发展方向和前景进行展望,为今后的研究提供参考。     

Thermochemical investigation of Zr doping in LiNi8/12Co2/12Mn2/12O2 based on phase equilibria simulation

The doping behavior of Zr in LiNi_8/12Co_2/12Mn_2/12O₂ (LNCM) is investigated by a simulation of the phase equilibria for the Li-(M^*,Zr)-O system (M^* = Ni, Co, Mn) based on first-principles calculations followed by a thermochemical post-analysis of the resultant phase diagrams. The results indicate that the stable state at the synthetically stoichiometric composition of LNCM with Zr is a mixture of undoped LNCM with a Li₂ZrO₃ secondary phase; doping of Zr in the LNCM crystal is not thermodynamically favored. The energies of various states comprising LNCM supercells with defects, secondary phases, and Zr doping are examined, and the equilibrium doping concentration of Zr is calculated by considering the entire LNCM:Zr crystal as a statistical combination of these states. The doping concentration of Zr in the LNCM crystal is calculated to be very low, which enables balanced control between doping and coating, as recently reported through experimentation. The dopability of Zr is expected to increase with the depletion of O₂ supply during the heating of a system with a precisely controlled Li to M^* ratio, but this behavior is affected by the formation of defects, especially by M^* substitution for Li.     

光谱烧孔材料苯并卟啉锌配合物的电化学及现场光谱电化学特性

在CH₂Cl₂、THF及DMSO中研究了系列光谱烧孔材料苯并卟啉锌配合物的电化学及光谱电化学特性,给出不同结构的苯并卟啉锌配合物的氧化还原电位及相应氧化还原态的光谱,结合光谱数据和氢化还原电位数值估算了与光化学光谱烧孔过程密切相关的分子激发态氧化还原电位。     

单斜层状结构锂离子电池正极材料LiYxMn1-xO2的合成及电化学性能

以Na2CO3 、(CH3CO2)2Mn•4H2O、Y2O3和CH3COOLi•2H2O为原料,采用高温固相法经过2次灼烧和水热离子交换法得到一系列钇掺杂的LiMn1-xYxO2 (x=0.01,0.02,0.03,0.05) 化合物。通过XRD、XPS、循环伏安及恒电流充放电测试,研究了钇掺杂离子对合成正极材料结构及电化学性能的影响。X射线衍射测试结果表明,所得产物均具有单斜层状结构。循环伏安及恒电流充放电测试结果表明,合适的钇掺杂可以起到扩展锂离子脱嵌通道和稳定骨架结构的作用, 钇离子的引入可以部分取代原有的三价锰离子, 由于钇离子的离子半径较三价锰离子大, 因此稀土掺杂锰酸锂材料的晶胞参数比未掺杂材料大, 在一定程度上扩充了锂离子迁移的三维通道, 更有利于锂离子的嵌入与脱嵌,提高单斜层状LiMnO2 材料的电化学循环可逆性及循环稳定性。通过对所得化合物进行了钇掺杂量及电化学性能的研究,得到性能比较优良的LiY0.021Mn0.979O2化合物,其首次放电比容量为125.7 mA·h/g,100次循环以后,放电比容量达212.1 mA·h/g,远高于未掺杂材料的放电容量138 mA·h/g。交流阻抗测试结果表明, Y3+的掺入能降低材料的电化学反应阻抗和提高材料中Li+的扩散能力。     

Structural,optical and photoelectron spectroscopic studies of nano/micro ZnO:Cd rods synthesized via sol-gel route

Thin films of cadmium doped zinc oxide rod like microstructure have been synthesized by a very simple sol-gel dip coating technique. Sols were prepared from hydrated zinc oxide precursor and 2-methoxyethanol solvent with monoethanolamine as a sol stabilizer. XRD pattern confirmed the hexagonal wurtzite structure of the deposited ZnO films. Surface morphologies of the films have been studied by a scanning electron microscope and an atomic force microscope, which confirmed that the films are composed of densely packed randomly oriented nano/submicron rods with diameter in the range 300–400 nm having various lengths. We proposed a possible growth mechanism for this rodlike structure. X-ray photoelectron spectroscopic study was used to determine the binding energies and the Zn 2p3/2, Cd 3d5 and O 1s peaks in the XPS spectra were located at 1021.08 eV, 404.6 eV and 529.8 eV respectively, which confirmed the Cd doping in ZnO. Cadmium content in the film was estimated both from energy dispersive X-ray analysis and XPS measurement. Band gap energy determined from optical transmittance spectra systematically varied from 3.28 eV to 3.15 eV for 0% to 5.6% of Cd doping. Urbach parameter determined from the band tail of the transmittance spectra showed that it increased with doping percentage and this parameter for a fixed cadmium doping level decreased with increase of temperature.