种子生长法制备Au@Ag核壳纳米粒子

Au@Ag核壳纳米粒子由于具有优异的局部等离子共振性质 (LSPR),近年来引起人们极大的关注,目前,在成像、催化、信息存储、生化传感等领域已经得到了广泛的应用。在制备Au@Ag核壳纳米粒子的方法中,种子生长法的应用最为广泛,因为它可以实现对Ag壳尺寸及形貌的有效控制。本文综述了影响Au@Ag核壳纳米粒子核壳结构尺寸、形貌、Ag壳厚度以及覆盖均匀程度的一些主要因素,包括Au种子的形貌和浓度、AgNO₃浓度、封端剂、还原剂以及其他一些影响因素。研究发现,Au@Ag核壳纳米粒子在表面增强拉曼光谱 (SERS) 方面具有广泛的应用前景。     

Ag/Au纳米粒子的没食子酸还原制备及其共振瑞利散射光谱测定人血清总蛋白

以没食子酸为还原剂和稳定剂,用种子生长法制备出粒径均匀、单分散性和稳定性好、近球形的Ag/Au 核壳纳米粒子.高分辨透射电镜(HRTEM)与 X-射线能量色散光谱仪(EDX)测试表明,在Ag/Au摩尔比为1:1.6时,Au已完全包裹在Ag纳米粒子表面时,平均粒径为25 nm.以此摩尔比制备的Ag/Au核壳纳米粒子为探针...     

Ag_核Au_壳金属复合纳米粒子的制备及表面增强拉曼光谱研究

在已制备好的Ag纳米粒子表面,通过化学还原的方法沉积生长Au包裹层,制备了粒子尺寸为50-70nm的Ag核Au壳复合纳米粒子.通过改变AuCl₄^-量,使Ag_100-xAu_x中Au的含量由x=0变为x=30.用UV-Vis吸收光谱和透射电子显微镜(TEM)对该结构纳米粒子进行了表征,并以对巯基苯胺(PATP)为探针分子进行表面增强拉曼光谱(SERS)研究.表面拉曼光谱表明,该结构的纳米粒子具有比Ag更强的SERS活性,随着Au:Ag比例的逐渐增加,其活性呈现先增大后减小的趋势,其最大增强约为Ag纳米粒子的10倍.     

Au-Ag合金纳米粒子制备及其表面增强拉曼光谱研究

首先采用柠檬酸钠法制得Au-Ag合金纳米种子, 然后采用盐酸羟胺生长法得到不同组成的Au-Ag合金纳米粒子. 在其UV-Vis光谱中只观察到一个位于单金属银和金之间的等离子体共振峰, 表明Au-Ag合金纳米粒子已经形成. TEM结果表明, 合金纳米粒子的粒径约为60 nm, 且颜色均一, 没有明显的核壳结构. 用苯硫酚(TP)作为探针分子研究了合金纳米粒子的表面增强拉曼光谱(SERS). 结果表明, SERS强度与合金纳米粒子的组成和尺寸有关. 当纳米粒子粒径一定时, 除Au25Ag75外, 随着金的增加SERS强度增强. Au25Ag75的粒径比Ag小, 导致SERS强度比Ag低. Au50Ag50和Au75Ag25加入TP分子后, 其聚集方式与Au相似, 等离子体共振峰逐渐靠近1064 nm, 金含量较高时, TP的SERS归于聚集体的等离子体共振增强的贡献.     

Au@Pt纳米粒子催化O2还原反应的电化学研究

以100 nm的Au粒子为核,抗坏血酸为还原剂,H2PtCl6·6H2O为前驱体,合成了Pt包Au核壳结构纳米粒子( Au@ Pt)及其修饰的玻碳(GC)电极(Au@ Pt/GC).采用旋转圆盘电极等常规电化学方法,比较了Au@ Pt/GC和商用碳载铂(Pt/C)修饰的玻碳电极(Pt/C/GC)催化O2还原反应活性及耐甲醇性能,发现Au@ Pt纳米粒子在铂用量很低的情况下,其催化O2还原反应活性仍与商用Pt/C相当,而且还具有优良的耐甲醇性能;其催化O2还原反应机理按O2直接还原成H2O的四电子历程进行.     

不同Pt壳厚度Au_(core)@Pt_(shell)纳米粒子SERS效应

以Au粒子(55nm)为核,抗坏血酸为还原剂,将不同量的Pt沉积在Au核上,制得可控壳层厚度(0.3～6nm)的Pt包Au纳米粒子(Aucore@Ptshell).用紫外-可见吸收光谱、扫描电镜(SEM)、透射电镜(TEM)和电化学循环伏安法等观测Aucore@Ptshell纳米粒子的表面形貌、结构和性能.另以SCN-为探针,考察了Pt壳厚度对Aucore@Ptshell纳米粒子SERS信号的影响.结果表明,SCN-离子的SERS信号强度随Pt壳厚度的增加呈指数衰减,当Pt壳厚度为1.4nm时,Aucore@Ptshel纳米粒子表现出铂良好的电化学性能,又具有较强的SERS活性.     

光催化还原制备Au/Ag核壳结构纳米粒子及其修饰电极的电催化性能

以Keggin结构硅钨杂多酸H4SiW12O40(SiW12)为光催化还原剂,通过光化学还原法制备Au/Ag核壳结构纳米粒子. 透射电子显微镜分析显示,所得纳米粒子粒径为30～40 nm,呈均匀分散的球形颗粒,该制备方法的特点是可以较好的避免单金属纳米粒子的形成. 将Au/Ag核壳纳米粒子修饰到具有PVP膜的玻碳电极表面,得到SiW12-(Au/Ag)-PVP多层膜修饰电极. 该修饰电极在0.5 mol/L H2SO4介质中具有良好的电化学响应,在0～-0.75 V电位范围内,出现了3对归属于SiW12的氧化还原峰,且电极性能稳定,灵敏度高. 对H2O2的电催化还原性能明显优于单金属Ag纳米粒子修饰电极,说明Au核的存在可以很好的改善Ag的电催化性能,Au和Ag之间存在相互协同催化作用.     

磁性Fe_2O_3/Au/Ag复合纳米粒子的制备及其富集作用研究

利用种子生长法制备了磁性Fe2O3/Au/Ag复合纳米粒子,采用UV-vis和SEM对其光学性质以及表面结构的变化进行了表征.通过调节硝酸银的用量,制备了一系列具有不同Ag壳层厚度和表面结构的双金属外壳纳米粒子.以苯硫酚(TP)为探针分子,研究了不同Ag壳厚度的磁性纳米粒子的表面增强拉曼散射(SERS)活性.结果表明其SERS活性与表面结构的改变有关,在同时出现Ag和Au光学性质的Fe2O3/Au/Ag复合纳米粒子表面可观察到最强的SERS效应,这与表面的针孔效应以及Ag和Au之间的耦合增强作用有关.考察了Fe2O3/Au/Ag复合纳米粒子的磁富集作用,并利用SERS原位监测磁富集溶液中低浓度TP的能力,研究结果表明通过磁富集可提高SERS检测限,并且Fe2O3/Au/Ag的磁富集能力较Fe2O3/Au弱,但前者SERS信号较强.     

AucoreCoshell纳米粒子的制备、表征及其表面增强拉曼光谱研究

在乙醇体系中和在制备好的Au纳米粒子表面, 用水合肼还原钴盐制备Co壳, 首次通过化学还原法制得核壳结构的Au-Co纳米粒子, 并通过控制钴盐的投料, 得到不同包裹层厚度的AucoreCoshell纳米粒子. 用扫描电子显微镜(SEM)和电化学循环伏安法(CV)等测试方法对其进行表征, 并用吡啶(Py)作为探针分子研究了其SERS效应.     

Au/Ag核一壳结构复合纳米粒子形成机制的研究

在已制备好的Au纳米粒子表面,通过化学还原的方法沉积生长Ag包覆层,通过 控制Au, Ag的比列,制备了粒度均匀且粒径可控的Au/Ag核-壳结构纳米粒子。利用 UV-vis吸收光谱和透射电子显微镜（TEM）对SAu, Ag摩尔比为1：10的复合纳米粒 子的光学性质和形态进行随时监测,直接观察了核-壳结构纳米粒子的生长过程： 一部分Ag+在Au核表面还原生长,溶液中其余Ag+还原形成银的纳米团簇向粒子表面 的继续沉积生长,壳层增厚。     

Sensoric potential of gold�Csilver core�Cshell nanoparticles

The sensitivities of five different core-shell nanostructures were investigated towards changes in the refractive index of the surrounding medium. The shift of the localized surface plasmon resonance (LSPR) maximum served as a measure of the (respective) sensitivity. Thus, gold-silver core-shell nanoparticles (NPs) were prepared with different shell thicknesses in a two-step chemical process without the use of any (possibly disturbing) surfactants. The measurements were supported by ultramicroscopic images in order to size the resulting core-shell structures. When compared to sensitivities of nanostructures reported in the literature with those of the (roughly spherical) gold-silver core-shell NPs, the latter showed comparable (or even higher) sensitivities than gold nanorods. The experimental finding is supported by theoretical calculation of optical properties of such core-shell NP. Extinction spectra of ideal spherical and deformed core-shell NPs with various core/shell sizes were calculated, and the presence of an optimal silver shell thickness with increased sensitivity was confirmed. This effect is explained by the existence of two overlapping plasmon bands in the NP, which change their relative intensity upon change of refractive index. Results of this research show a possibility of improving LSPR sensor by adding an extra metallic layer of certain thickness.     

A visual photothermal paper sensor for H_2S recognition through rational modulation LSPR wavelength of plasmonics

It is known that the localized surface plasmon resonance(LSPR) wavelength of plasmonics is highly dependent on compositions and geometry of plasmonics as well as the surrounding environments. Here, monodispersed Au@Ag core-shell nanoparticles(Au@Ag NPs) were prepared by carefully optimizing the shell thickness of Au@Ag NPs, and the presence of hydrogen sulfide(H_2 S) would significantly alter the LSPR wavelength. On the basis of this, a photothermal paper sensor for on-site recognition of H_2 S was constructed with a visual detection limit of 12.8 ng/L.     

A visual photothermal paper sensor for H<Subscript>2</Subscript>S recognition through rational modulation LSPR wavelength of plasmonics

It is known that the localized surface plasmon resonance (LSPR) wavelength of plasmonics is highly dependent on compositions and geometry of plasmonics as well as the surrounding environments. Here, monodispersed Au@Ag core-shell nanoparticles (Au@Ag NPs) were prepared by carefully optimizing the shell thickness of Au@Ag NPs, and the presence of hydrogen sulfide (H₂S) would significantly alter the LSPR wavelength. On the basis of this, a photothermal paper sensor for on-site recognition of H₂S was constructed with a visual detection limit of 12.8 ng/L.     

Synthesis of Au@Ag core-shell nanocubes containing varying shaped cores and their localized surface plasmon resonances

We have synthesized Au@Ag core-shell nanocubes containing Au cores with varying shapes and sizes through modified seed-mediated methods. Bromide ions are found to be crucial in the epitaxial growth of Ag atoms onto Au cores and in the formation of the shell's cubic shape. The Au@Ag core-shell nanocubes exhibit very abundant and distinct localized surface plasmon resonance (LSPR) properties, which are core-shape and size-dependent. With the help of theoretical calculation, the physical origin and the resonance mode profile of each LSPR peak are identified and studied. The core-shell nanocrystals with varying shaped cores offer a new rich category for LSPR control through the plasmonic coupling effect between core and shell materials.     

Peak shape analysis of Ag 3d core‐level X‐ray photoelectron spectra of Au@Ag core‐shell nanoparticles using an asymmetric Gaussian–Lorentzian mixed function

This article reports on the peak shape analysis of X‐ray photoelectron spectra of gold‐silver core‐shell (Au@Ag) nanoparticles (NPs) using an asymmetric Gaussian–Lorentzian mixed function. Unlike Ag NPs, Au@Ag NPs have no oxide peak and show asymmetric line shape with a high energy tail in Ag 3d core‐level spectra. A monotonic increase in the Ag 3d binding energy and a decrease in the degree of asymmetry with increasing the Ag shell thickness were observed supporting the occurrence of charge transfer from Au core to Ag shell. Copyright © 2012 John Wiley & Sons, Ltd.     

内部具有可移动金核的中空银纳米颗粒的制备、表征及其表面增强拉曼效应

采用振荡法和种子生长技术制备出核壳结构的Au@SiO2纳米颗粒及夹层结构的Au@SiO2@Ag纳米颗粒, 用HF将Au@SiO2@Ag NPs夹层的SiO2溶解, 得到内部带有粒径为30 nm的可移动金核、壳层厚度约为30 nm的中空银纳米颗粒(Au@air@Ag NPs). 用扫描电子显微镜和透射电子显微镜对所得到的纳米微球的形貌进行了表征, 并以罗丹明B为探针分子研究了Au@air@Ag 纳米颗粒的表面增强拉曼(SERS)效应, 发现Au@air@Ag 纳米颗粒是一种可应用于SERS的理想材料.     

Au/Ag核-壳结构纳米粒子的制备及其SERS效应

随着大量有关表面增强拉曼散射 (SERS)的实验和理论研究的开展 ,金属纳米粒子作为一类重要的 SERS增强介质 ,已引起了人们浓厚的研究兴趣 [1] .而 Au和 Ag作为最常用的活性基底物质 ,更是研究的热点 [2 ,3 ] .最近 ,美国印第安那大学的 Nie等 [4 ] 在单个银纳米粒子上 ,观察到高达 1 0 14 ～ 1 0 15的SERS因子 .同时 ,他们的另外一项工作表明银纳米粒子的形状和大小对 SERS活性有很大影响 [5] .但是 ,由于 Ag溶胶制备的重复性较差 ,且粒度分布不均匀 ,通过控制银颗粒大小而调控 SERS活性是相当困难的[6] .与 Ag相比 ,Au在可见光…     

Green Synthesis of Silver Nanoparticles Using <Emphasis Type="Italic">Commiphora caudata</Emphasis> Leaves Extract and the Study of Bactericidal Efficiency

The present study reports the synthesis of silver nanoparticles (Ag NPs) from silver nitrate solution using leaf extracts of Commiphora caudata. The formation of Ag NPs in the colloidal solution is confirmed by UV–Vis spectroscopy analysis. The identification of biomolecules is analyzed through fourier transform infrared spectroscopy. X-ray diffraction pattern shows that an average particle size of the synthesized nanoparticles are in the range of 40–24 nm. Field emission scanning electron microscopy and transmission electron microscopy confirm the formation Ag NPs in spherical shape. The photoluminescence study of the synthesized Ag NPs interprets the influence of C caudata leaf concentrations on emission behavior. Zeta potential measurement is carried out to determine the stability of synthesized Ag NPs. GC–MS analysis revealed that the C. caudata contained 11 compounds, such as Stigmasterol (24.14 %), Hexacosanoic acid, methyl ester (15.13 %) and 2-bromophenyl morpholine-4-carboxylate (11.71 %). The antibacterial activity of Ag NPs shows that these bio capped Ag NPs have higher inhibitory action for Escherichia coli, Klebsiella pheumoniea, Micrococcus flavus, Pseudomonas aeruginosa, Bacillus subtilis, Bacillus pumilus, Staphylococcus aureus.     

Ag Nanoparticle/Nanofibrillated Cellulose Composite as an Effective and Green Catalyst for Reduction of 4-Nitrophenol

In this work, silver nanoparticles (Ag NPs) prepared through in situ green and facile synthesis by using nanofibrillated cellulose (NFC) hydrogel as support, stabilizer and reducing agent by two different methods. Their catalytic abilities were examined for conversion of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). The structure of as-synthesized composites with different AgNO₃ concentrations were characterized by ultraviolet–visible spectroscopy, field emission scanning electron microscopy, transmission electron microscopy; energy dispersive spectroscopy, Fourier transform infrared spectroscopy and X-ray diffraction. Results show that all nanocomposites demonstrated excellent catalytic activity. Among them, Ag@NFC-2 sample, with spherical and well-dispersed Ag NPs along the nanofiber, produced by the second method having 0.25 M AgNO₃ concentration presented outstanding catalytic efficiency.     

Analytical separation of Au/Ag core/shell nanoparticles by capillary electrophoresis

This paper demonstrates that capillary electrophoresis (CE) can be employed for characterizing the sizes of a series of Au/Ag core/shell nanoparticles (NPs). We effected the CE separation of Au/Ag core/shell NPs using a mixed buffer of sodium dodecyl sulphate (SDS) (40 mM) and 3-(cyclohexylamino)propanesulfonic acid (10 mM) at pH 9.7 and an applied voltage of 20 kV. A linear relationship (R(2)>0.99) existed between the electrophoretic mobilities and the sizes of the Au/Ag core/shell NPs within the diameter range from 25 to 90 nm; the relative standard deviations of these electrophoretic mobilities were <0.9%. From the good correlation between the results obtained by CE and those provided by scanning electron microscopy, we confirmed that this CE method is a valid one for characterizing the sizes of Au/Ag core/shell NP samples. In addition, when the Au/Ag core/shell NPs were separated through CE and detected using an on-line photodiode array detector, this approach allowed the chemical characterization of the NP species. This CE approach should allow the rapid and cost-effective characterization of a number of future nanomaterials.