Synthesis and formation mechanism of nanoneedles and nanorods of manganese oxide octahedral molecular sieve using an ionic liquid

Single-crystalline cryptomelane-type manganese oxide octahedral molecular sieve (OMS-2) nanoneedles and nanorods were prepared by a solution-phase approach in the presence of an ionic liquid 1-n-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]BF4). [BMIM]BF4 can act as a cosolvent, structure-directing agent, and reducing reagent in the reaction system. Based on the redox reaction of MnCl2 and KMnO4 in the mixed solvents of water and [BMIM]BF4, the formation of OMS-2 nanoneedles followed the rolling mechanism with lamellae as an intermediate. However, the direct reaction of KMnO4 with [BMIM]BF4 resulted in the formation of OMS-2 nanorods with diameters as small as 3-6 nm. The formation mechanism of OMS-2 nanostructures was discussed.     

Sonochemical formation of iron oxide nanoparticles in ionic liquids for magnetic liquid marble

Ionic liquids (ILs)-stabilized iron oxide (Fe(2)O(3)) nanoparticles were synthesized by the ultrasonic decomposition of iron carbonyl precursors in [EMIm][BF(4)] without any stabilizing or capping agents. The Fe(2)O(3) nanoparticles were isolated and characterized by X-ray powder diffraction, transmission electron microscopy and susceptibility measurements. The physicochemical properties of ILs containing magnetic Fe(2)O(3) nanoparticles (denoted as Fe(2)O(3)@[EMIm][BF(4)]), including surface properties, density, viscosity and stability, were investigated in detail and compared with that of [EMIm][BF(4)]. The Fe(2)O(3)@[EMIm][BF(4)] can be directly used as magnetic ionic liquid marble by coating with hydrophobic and unreactive polytetrafluoroethylene (PTFE), for which the effective surface tension was determined by the puddle height method. The resulting magnetic ionic liquid marble can be transported under external magnetic actuation, without detachment of magnetic particles from the marble surface that is usually observed in water marble.     

Use of ionic liquids in the synthesis of nanocrystals and nanorods of semiconducting metal chalcogenides

We have synthesized nanoparticles of hexagonal CdS in the diameter range 3-13 nm by the reaction of cadmium acetate dihydrate with thioacetamide in imidazolium [BMIM]-based ionic liquids. We have obtained three different particle sizes of CdS by changing the anion of the ionic liquid. Addition of trioctylphosphine oxide (TOPO) to the reaction mixture causes greater monodispersity as well as smaller particle size, while addition of ethylenediamine produces nanorods of 7 nm average diameter. Hexagonal ZnS and cubic PbS nanoparticles with average diameters of 3 and 10 nm, respectively, have been prepared by the reaction of the metal acetates with thioacetamide in [BMIM][BF4]. Hexagonal CdSe nanoparticles with an average diameter 12 nm were obtained by the reaction of cadmium acetate dihydrate with dimethylselenourea in [BMIM][BF4]. In this case also we observe the same effect of the addition of TOPO as in the case of CdS. Addition of ethylenediamine to the reaction mixture gives rise to nanorods. ZnSe nanowires with a cubic structures, possible diameters in the range 70-100 nm by the reaction of zinc acetate dihydrate with dimethylselenourea in [BMIM][MeSO4]. The nanostructures obtained are single crystalline in all the cases. Most of the nanostructures show characteristic UV/Vis absorption and photoluminescence emission spectra. The thermodynamically most stable structures are generally produced in the synthesis carried out in ionic liquids.     

Structures of ionic liquids with different anions studied by infrared vibration spectroscopy

We investigated the structures of ionic liquids (1-butyl-3-methylimidazolium iodide [BMIM][I] and 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF4]) and their aqueous mixtures using attenuated total reflection (ATR) infrared absorption and Raman spectroscopy. The ATR spectrum in the CHx (x = 1, 2, 3) vibration region from 2800 to 3200 cm-1 was very different between [BMIM][BF4] and [BMIM][I] even though all the spectral features in this region were from the butyl chain and the imidazolium ring of the same cation. The spectrum did not change appreciably irrespective of the water concentration for [BMIM][BF4], whereas the spectrum from [BMIM][I] showed significant changes as the water concentration was increased, especially in CH-vibration modes from the imidazolium ring. For very diluted solutions both aqueous mixtures of [BMIM][I] and [BMIM][BF4] showed very similar spectra. Mixing of [BMIM][I] with heavy water (D2O) facilitated the isotopic exchange of the proton attached to the most acidic carbon of the imidazolium ring into deuterium from D2O, whereas even prolonged exposure to D2O did not induce any isotopic exchange for [BMIM][BF4]. Raman spectra around 600 cm(-1) indicative of the butyl chain conformation also changed differently as the water concentration was increased between [BMIM][I] and [BMIM][BF4]. These differences are considered to come from the variation in the position of the anion, where I- is expected to be closer to the C(2) hydrogen of the imidazolium cation and interacting more specifically as compared to BF(4-).     

离子液体介质中钌纳米粒子催化苯乙酮及其衍生物的不对称加氢反应

采用水溶性三(间-磺酸钠苯基)膦(TPPTS)作稳定剂, 在离子液体1-丁基-3-甲基-咪唑四氟硼酸盐([BMIM]BF4)或1-丁基-3-甲基-咪唑对甲基苯磺酸盐([BMIM][p-CH3C6H4SO3])介质中用氢气还原RuCl3·3H2O, 得到钌纳米粒子. 将此钌纳米粒子与(1S, 2S)-1,2-二苯基乙二胺(简称(1S, 2S)-DPEN)、KOH在离子液体/异丙醇介质中原位生成一种不对称加氢催化剂, 用于催化苯乙酮及其衍生物的不对称加氢反应. 实验结果表明, 离子液体介质中的纳米钌催化剂体系具有良好的催化活性和对映选择性. 在优化反应条件下, 催化苯乙酮获得了100%的转化率和79.1%的对映选择性. 并且产物经正己烷萃取后, 含有钌纳米粒子的离子液体可以循环使用.     

Determination of an acidic scale in room temperature ionic liquids

The acidity scale of different Br?nsted acids in ionic liquids such as [BMIM][NTf2], [BMIM][BF4], and [BMMIM][BF4] has been investigated by determination of Hammett functions, using a spectrophotometric indicator method. This scale should permit one to correlate the acidity strength of ionic liquid systems with their ability to achieve acid-catalyzed reactions.     

Synthesis of cyano-bridged magnetic nanoparticles using room-temperature ionic liquids

A principally new exploit of ionic liquids as an alternative reaction medium in the synthesis of cyano-bridged coordination-polymer nanoparticles is reported. Stable colloid solutions containing nanoparticles of cyano-bridged molecule-based magnets, M)[Fe(CN)6]2/[RMIM][BF4] (M2+=Ni, Cu, Co) and Fe4[Fe(CN)6]3/[RMIM][BF4] (R=1-butyl (BMIM), 1-decyl (DMIM)), were prepared in the corresponding 1-R-3-methylimidazolium tetrafluoroborate [RMIM][BF4], which acts as both a stabilising agent and a solvent. By varying the length of the N-alkyl chain on the imidazolium cation of [RMIM]+ and the temperature, the growing process can be controlled to produce nanoparticles of different sizes. By studying the magnetic properties of frozen colloids it is shown that the relaxation of magnetisation is strongly influenced by interparticle interactions, which leads to the appearance of spin-glass-like dynamics in these systems.     

用[BMIM][Cu2Cl3]离子液体萃取脱除汽油中的硫化物

以不同的IL（ionic liquid）/油质量比,采用[BMIM][Cu2Cl3]（[BMIM]=1-butyl-3-methylimidazolium）对模型汽油和商品汽油进行单步和多步萃取脱硫实验;并合成几种具有不同阴离子和阳离子结构的离子液体,评价和比较了离子液体对商品汽油的萃取脱硫性能的影响。实验结果表明,具有较好的水稳定性和常温流动性的[BMIM] [Cu2Cl3]离子液体硫容较高,在IL/油质量比为1∶3时,经多步萃取后,油品中的硫质量分数降至20×10-6～30×10-6,累计脱硫率超过95%。汽油中其他组分对脱硫效果影响很小。[BMIM][Cu2Cl3]与汽油形成稳定的两相系统,分离方便。离子液体脱硫能力可以通过四氯化碳反萃取完全恢复。     

Dynamically coated silica monolith with ionic liquids for capillary electrochromatography

An ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF4]) was introduced as dynamic coating of a silica monolithic column for capillary electrochromatography of phenols and nucleoside monophosphates. The run-to-run and column-to-column repeatability of migration time for six phenols were satisfactory on this column with relative standard deviation values less than 0.90 and 4.31%, respectively. Anodic electroosmotic flow (EOF) was observed, which increased with the increase of [BMIM][BF4] concentration within 120 mM and when [BMIM][BF4] concentration was above 120 mM, EOF leveled off due to the saturation of [BMIM][BF4] on the monolith. Efficient separation of phenols and nucleoside monophosphates on this dynamically coated monolithic column was obtained, compared with a dynamically coated fused-silica column and unmodified silica monolithic column. The retention behavior of uncharged phenols is mainly manipulated by hydrophobic interactions due to the presence of butyl groups, and that of nucleoside monophosphates is governed by the electrostatic attraction mechanism based on the interaction between positively charged [BMIM][BF4] moieties and negatively charged phosphate groups. In addition, silica matrix also contributes to the separation resolution.     

Surface tension of binary mixtures of imidazolium and ammonium based ionic liquids with alcohols, or water: cation, anion effect

The surface tensions were measured at atmospheric pressure, with use of a ring tensiometer, of a series of alcoholic solutions of closely related ionic liquids: 1-methyl-3-methylimidazolium methylsulfate, [MMIM][CH3SO4] in alcohol (methanol, or ethanol, or 1-butanol at 298.15 K), 1-butyl-3-methylimidazolium methylsulfate, [BMIM][CH3SO4] in alcohol (methanol, or ethanol, or 1-butanol at 298.15 K), 1-butyl-3-methylimidazolium octylsulfate, [BMIM][OcSO4] in alcohol (methanol, or 1-butanol at 298.15 K) and of 1-hexyloxymethyl-3-methylimidazolium tetrafluoroborate, [C6H(13)OCH2MIM][BF4], 1,3-dihexyloxymethylimidazolium tetrafluoroborate, [(C6H13OCH2)2IM][BF4] in alcohol (methanol, or 1-butanol, or 1-hexanol at 308.15 and 318.5 K) and hexyl(2-hydroxyethyl)dimethylammonium bromide, C6Br in 1-octanol at 298.15 K. The set of ammonium ionic liquids of different cations and anions (C2Br, C2BF4, C2PF6, C2N(CN)2, C3Br, C4Br and C6Br) was chosen to show the influence of small amount of the ammonium ionic liquid on the surface tension of water at 298.15 K. The influence of the cation, or anion alkyl chain length on the properties under study (densities and surface tension) was tested.     

Halo- and azidodediazoniation of arenediazonium tetrafluoroborates with trimethylsilyl halides and trimethylsilyl azide and sandmeyer-type bromodediazoniation with Cu(I)Br in [BMIM][PF6] ionic liquid

Reaction of [ArN(2)][BF(4)] salts immobilized in [BMIM][PF(6)] ionic liquid (IL) with TMSX (X = I, Br) and TMSN(3) represents an efficient method for the preparation of iodo-, bromo-, and azido-derivatives via dediazoniation. The reactions can also be effected starting with ArNH(2) by in situ diazotization with [NO][BF(4)] followed by reaction with TMSX or TMSN(3). Depending on the substituents on the benzenediazonium cation, competing fluorodediazoniation (ArF formation) and hydrodediazoniation (ArH formation) were observed. Dediazoniation with TMSN(3) and with TMSI generally gave the highest chemoselectivity toward ArN(3) and ArI formation. The IL was recycled and reused up to 5 times with no appreciable decrease in the conversions. Multinuclear NMR monitoring of the interaction of [ArN(2)][BF(4)]/TMSX, [BMIM][PF6]/TMSX, and [BMIM][PF(6)]/TMSX/[ArN(2)][BF(4)] indicated that TMSF is formed primarily via [ArN(2)][BF(4)]/TMSX, generating [ArN(2)][X] in situ, which gives ArX on dediazoniation. Competing formation of ArF in Sandmeyer-type bromodediazoniation of [ArN(2)][BF(4)] with Cu(I)Br immobilized in the IL points to significant involvement of heterolytic dediazoniation.     

Sum frequency generation study of the room-temperature ionic liquids/quartz interface

The purpose of this investigation is to study the ionic liquid/quartz interface with sum frequency generation vibrational spectroscopy (SFG). SFG spectroscopy was chosen for this study because of its unique ability to yield vibrational spectra of molecules at an interface. Different polarization combinations are used, which probe different susceptibilities, giving SFG the ability to determine molecular orientation at the interface. The ionic liquids used were 1-butyl-3-methylimidazolium tetrafluoroborate, [BMIM][BF(4)], and 1-butyl-3-methylimidazolium hexafluorophosphate, [BMIM][PF(6)]. To determine the influence of the molecular structure and charge on orientation at the interface, neutral, 1-methylimidazole, and 1-butylimidazole were also studied. Raman spectra and depolarization ratios were obtained for neat samples of 1-methylimidazole, 1-butylimidazole, and 1-butyl-3-methylimidazolium tetrafluoroborate recorded from 2700 to 3300 cm(-1). SFG spectra of the 1-methylimidazole/quartz interface showed both methyl and aromatic C-H vibrations. Orientation calculations determined that the ring of the molecule is tilted 45-68 degrees from normal, with the methyl group oriented 32-35 degrees from normal. The SFG spectra of 1-butylimidazole contain several resonances from the alkyl chain with only one weak resonance from the aromatic ring. Orientation calculations suggest that the ring is lying in the plane of the surface with the methyl group pointing 43-47 degrees from normal. The orientation of the [BMIM][PF(6)] ionic liquid was sensitive to trace amounts of water and had to be evacuated to <3 x 10(-5) Torr for the water to be removed. SFG spectra of both ionic liquids were similar, displaying resonances from the alkyl chain as well as the aromatic ring. Orientation analysis suggests the aromatic ring was tilted 45-90 degrees from normal for [BMIM][BF(4)], while the ring for [BMIM][PF(6)] was tilted 38-58 degrees from normal. This suggests the orientation of the molecule is influenced by the size of the anion.     

Nucleophilicity in ionic liquids. 3. Anion effects on halide nucleophilicity in a series of 1-butyl-3-methylimidazolium ionic liquids

We have continued the study of halide nucleophilicity in ionic liquids, concentrating on the effect of changing the anion ([BF(4)](-), [PF(6)](-), [SbF(6)](-), [OTf](-), and [N(Tf)(2)](-)) when the cation is [bmim](+) (where bmim = 1-butyl-3-methylimidazolium). It was found that the nucleophilicities of all the halides were lower in all of the ionic liquids than in dichloromethane. Changing the anion affected the order of halide nucleophilicity, e.g., in [bmim][BF(4)] the order of nucleophilicity was Cl(-)>Br(-)>I(-) while in [bmim][N(Tf)(2)] the order was Cl(-)相似文献   

Electrophilic chemistry of propargylic alcohols in imidazolium ionic liquids: propargylation of arenes and synthesis of propargylic ethers catalyzed by metallic triflates [Bi(OTf)3, Sc(OTf)3, Yb(OTf)3], TfOH, or B(C6F5)3

Metallic triflates M(OTf)(3) (M = Bi, Sc, Yb), immobilized in imidazolium ionic liquids [BMIM][BF(4)], [BMIM][PF(6)] and [BMIM][OTf] are efficient systems for one-pot reactions of propargylic alcohols 1,3-diphenyl-2-propyn-1-ol Ia, 1-methyl-3-phenyl-2-propyn-1-ol Ib, and 2-pentyn-1-ol Ic, with a wide range of arenes bearing activating substituents, under mild conditions. The [BMIM][PF(6)]/B(C(6)F(5))(3) and [BMIM][PF(6)]/TfOH systems were superior in propargylation with Ib and Ic, while reaction of 3-phenyl-2-propyn-1-ol Id with activated aromatics resulted in the formation of diaryl-propanones instead. Propargylation of anisole with Ib under M(OTf)(3) catalysis is highly para selective, but with TfOH or B(C(6)F(5))(3) as catalyst the ortho isomer was also formed. Steric influence of the propargylic moiety on substrate selectivity is reflected in the lack of ortho propargylation for phenol and ethylbenzene by using propargylic alcohol Ia, and notable formation of the ortho isomer employing alcohol Ib. In the later case para selectivity could be increased by running the reaction at r. t. for 10 h. The Bi(OTf)(3)-catalyzed reaction of 1,3-dimethoxybenzene with Ia led to minor formation of dipropargylated derivative, along with the monopropargyl product. Propargylation of the less reactive arenes (mesitylene, ethylbenzene, toluene), using Sc(OTf)(3) as catalyst, led increasingly to the formation of dipropargylic ethers and propargyl ketones, with no ring propargylation product with toluene. Concomitant formation of dipropargylic ether was also observed in Yb(OTf)(3)-catalyzed propargylation of β-naphthol, whereas propargylation of 2-nitro and 4-nitro-aniline led to N-propargylation. The recycling/reuse of the IL was demonstrated in representative cases with no appreciable decrease in the conversions over 3 cycles. It was also shown that recycled IL could be used to propargylate a different aromatic compound. The efficacy of IL/M(OTf)(3) and IL/TfOH systems for cross-breeding two propargylic alcohols or a propargylic alcohol with a non-propargylic alcohol and/or self-coupling, to form a wide variety of functionalized ethers is also demonstrated.     

The Synthesis of Anatase TiO2 Nanoparticles by Solvothermal Method using Ionic Liquid as Additive

The solvothermal reactions of Ti(OiPr)₄ in alcohol using ionic liquid as additive were investigated. In the presence of [BMIM][Cl], [BMIM][Br], [BMIM][NTf₂], [BMIM][SO₃Me], [BMIM][SO₄Me], or [BMIM][OTf] (BMIM = 1‐Butyl‐3‐methylimidazolium), pure anatase nanoparticles were obtained. The controlled hydrolysis of Ti(OiPr)₄ in the presence of ionic liquids to form titanium oxo clusters plays a key role in the formation of anatase nanostructures, and ionic liquids can be repeatedly used to synthesise anatase nanoparticles. However, in the presence of [BMIM][PF₆], [BMIM]₂[Ti(OH)₆] was obtained by an anion exchange reaction.     

Electrophilic nitration of aromatics in ionic liquid solvents.

Potential utility of a series of 1-ethyl-3-methylimidazolium salts [emim][X] with X = OTf-, CF3COO-, and NO3- as well as [HNEtPri2][CF3COO] (protonated Hünig's base) ionic liquids were explored as solvent for electrophilic nitration of aromatics using a variety of nitrating systems, namely NH4NO3/TFAA, isoamyl nitrate/BF3.Et2O, isoamyl nitrate/TfOH, Cu(NO3)/TFAA, and AgNO3/Tf2O. Among these, NH4NO3/TFAA (with [emim][CF3COO], [emim][NO3]) and isoamyl nitrate/BF3.Et2O, isoamyl nitrate/TfOH (with [emim][OTf]) provided the best overall systems both in terms of nitration efficiency and recycling/reuse of the ionic liquids. For [NO2][BF4] nitration, the commonly used ionic liquids [emim][AlCl4] and [emim][Al2Cl7] are unsuitable, as counterion exchange and arene nitration compete. [Emim][BF4] is ring nitrated with [NO2][BF4] producing [NO2-emim][BF4] salt, which is of limited utility due to its increased viscosity. Nitration in ionic liquids is surveyed using a host of aromatic substrates with varied reactivities. The preparative scope of the ionic liquids was also extended. Counterion dependency of the NMR spectra of the [emim][X] liquids can be used to gauge counterion exchange (metathesis) during nitration. Ionic liquid nitration is a useful alternative to classical nitration routes due to easier product isolation and recovery of the ionic liquid solvent, and because it avoids problems associated with neutralization of large quantities of strong acid.     

GC–MS study of thermochemical conversion of guaifenesin in the presence of 1-butyl-3-methylimidazolium-based ionic liquids

Research on Chemical Intermediates - Thermochemical conversion of guaifenesin was performed in the presence of 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF4] ionic liquid at...     

Lipase-catalyzed glucose fatty acid ester synthesis in ionic liquids

[reaction: see text] Glucose fatty acid ester synthesis with poly(ethylene glycol)-modified Candida antarctica lipase B (CAL-B) was performed in pure 1-butyl-3-methyl imidazolium tetrafluoroborate [BMIM][BF(4)] (30% conversion) and in pure 1-butyl-3-methyl imidazolium hexafluorophosphate [BMIM][PF(6)] (35% conversion). In a solvent system composed of ionic liquid and 40% t-BuOH conversions up to 90% and isolated yields of up to 89% were achieved using fatty acid vinyl esters as acyl donors and commercial CAL-B.     

Salen Mn（Ⅲ）配合物的合成及其在离子液体中对苯乙烯环氧化反应的催化性能

合成了在5,5’位上分别含羟基叔胺基和酯基叔胺基取代基的新型手性水杨醛Schiff碱的Salen Mn（Ⅲ）配合物1～4．在CH2Cl2／H2O反应体系中,以吡啶氮氧化物（PyNO）为助催化剂,NaCl0为氧化剂,考察了配合物1—4对苯乙烯环氧化的催化性能．以氯化-双[3-（叔丁基）-5-（N,N-二（乙醇基）氨基亚甲基）水杨醛]缩（1r,2R）-二苯基乙二胺[N,N’,O,O’]锰（Ⅲ）2和氯化-双[3-（叔丁基）-5-（N,N-二（乙酰乙酯基）氨基亚甲基）水杨醛]缩（1R,2R）-二苯基乙二胺[N,N’,O,O’]锰（11I）4为例,研究了不同的离子液体[BMIM]PF6和[BMIM]BF4对苯乙烯环氧化反应的影响．结果显示,两种离子液体的加入均能使催化剂循环使用,在离子液体[BMIM]PF。中,配合物2和4催化得到的环氧化物ee％值分别为53．2％和55．8％,且催化剂可以重复使用四次,效果好于在离子液体[BMIM]BF4中对苯乙烯的催化的影响．     

Sulfonate-tagged 1,4-diazabutadiene (DAD(S)) ligands and their noble-metal complexes--synthesis, characterization and immobilization in ionic liquids

A series of sulfonate-tagged 1,4-diazabutadiene (DAD(S)) ligands was prepared as salts with typical ionic liquid (IL) cations ([EMIM](+), [BMIM](+), [BMMIM](+), Bu(4)N(+), Bu(3)PMe(+), [Gua-4,4-4,4-4,1](+)). Complexation behaviour of the ligands was investigated by preparing complexes of the types [BMMIM](2)[MCl(2)(DAD(S))] (M = Pd, Pt), [BMMIM][Rh(COD)(DAD(S))] and [BMMIM](2)[Mo(CO)(4)(DAD(S))]. Using UV-Vis spectroscopy, the latter sulfonate-tagged chromophore was shown to be well soluble in the sulfonate IL [BMIM]OTf and completely insoluble in toluene, resulting in perfect immobilization. The crystal structures of [HNEt(3)](2)[2,6-Me(2)-Me-DAD(S)], [BMIM](2)[2,6-Me(2)-Me-DAD(S)], [BMMIM](2)[2,4,6-Me(3)-Me-DAD(S)], [BMMIM](2)[2,6-iPr(2)-Me-DAD(S)] and [HNEt(3)](2)[PdCl(2)(2,6-Me(2)-Me-DAD(S))] were determined. Regarding the diimine fragment, they show geometries similar to the respective non-sulfonated parent compounds.