接枝共聚物氯化聚乙烯—苯乙烯对聚苯乙烯的共混改性

用氯化聚乙烯接枝苯乙烯共聚物（ＣＰＥ－ｇ－Ｓｔ）和氯化聚乙烯（ＣＰＥ）对聚苯乙烯（ＰＳ）进行共混改性。当ＣＰＥ含量为２５％时，用ＣＰＥ－ｇＳｔ改性的共混物的冲击强度为１８．５ｋＪ．ｍ＾－＾２，是用ＣＰＥ改性的共混物冲击强度的２．１倍；其拉伸强度不低于３４ＭＰａ。     

酞侧基聚芳醚砜／聚苯硫醚共混物的形态与力学性能

酞侧基聚芳醚砜（ＰＥＳ－Ｃ）与聚苯硫醚（ＰＰＳ）具有部分相容性，虽然ＰＰＳ的强度和韧性均低于ＰＥＳ－，但ＰＰＳ含量为２％～１０％的ＰＥＳ－Ｃ／ＰＰＳ共混物在保持ＰＥＳ－Ｃ原有强度，断裂伸长率的同时，模量略增，冲击强度有很大幅度提高，熔融指数亦蛔。     

等规聚苯乙烯的合成及其结晶性能

用负载型钛系催化剂ＭｇＣｌ_２／ＴｉＣＬ_４，ＮｄＣｌ_３／ＡｌＥｔ_３（ＳＮ－１催化剂）在甲苯溶剂中进行苯乙烯的定向聚合，单体转化率。催化效率和产物的等规度随单体浓度增大先是提高，达到最大值后，逐渐下降，等规度最高可达９８％．产物的分子量则随单体浓度增大而增大．ＤＳＣ测定表明，产物中的无规物（ａＰＳ）有利于等规聚苯乙烯（ｉＰＳ）结晶，但对结晶的熔点有降低作用．向产物加入更多的ａＰＳ则由于稀释效应而使ｉＰＳ的结晶度线性下降．在聚乙烯（ＰＥ）／ｉＰＳ共混物中，ＰＥ含量对ｉＰＳ的结晶度无显著影响；但在聚碳酸酯（ＰＣ）／ｉＰＳ共混物中，ＰＣ含量对ｉＰＳ的结晶度影响较复杂．     

高密度聚乙烯与乙烯丙烯辛烯－1共聚物共混体系的相容性

用ＤＳＣ和ＷＡＸＤ方法研究了高密度聚乙烯／聚（乙烯丙烯辛烯－１）（ＨＤＰＥ／ＥＰＯ）共混体系的结晶性能。共混物的ＤＳＣ曲线皆呈单峰，表明共混体系形成了共晶。晶胞参数ａ及结晶度随共混物组成而变，进一步证明ＨＤＰＥ／ＥＰＯ共混体系的相容性．     

PC/ABS及PC/ABS/PE-g-MAH共混体系相容性的研究

研究了聚碳酸酯与ＡＢＳ（ＰＣ／ＡＢＳ）及ＰＣ／ＡＢＳ与马来酸酐接枝聚乙烯共聚物（ＰＣ／ＡＢＳ／ＰＥ－ｇ－ＭＡＨ）共混体系的力学性能和应力开裂性能。用ＤＳＣ和ＳＥＭ研究了共混体系的相容性。结果表明：ＡＢＳ的加入能提高ＰＣ的冲击强度,ＡＢＳ的含量及品种影响ＰＣ／ＡＢＳ合金的力学性能,ＡＢＳ能提高ＰＣ的耐溶剂应力开裂性能。ＰＣ／ＡＢＳ／ＰＥ－ｇ－ＭＡＨ共混体系的力学性能和相容性优于ＰＣ／ＡＢＳ共混体系,     

苯乙烯－乙烯共聚物的合成及其结构性能的研究

用负载型钛系催化剂ＭｇＣｌ_２／ＴｉＣｌ_４，ＮｄＣｌ_３／ＡｌＥｔ_３（ＳＮ－１催化剂）制备出组份比例变化的苯乙烯－乙烯共聚产物．共聚产物通过溶剂萃取分离、~１３Ｃ－ＮＭＲ、ＩＲ、动态粘弹谱进行表征，并初步进行了与聚苯乙烯（ａＰＳ）共混作用的研究．结果表明，ＳＮ－１催化剂能有效地催化苯乙烯与乙烯共聚合．共聚产物为含有均聚聚苯乙烯的共聚物复合物，其中的２５ｍｏｌ％的苯乙烯参加了共聚．共聚产物与ａＰＳ共混可明显提高ａＰＳ的冲击强度和断裂伸长率．     

热致液晶PEI与PES—C共混物的研究

通过熔融共混,制备不同配比（２．５／９７．５－７５／２５）的ＰＥＩ／ＰＥＳ－Ｃ共混物,使用ＷＡＸＤ、ＤＳＣ、锥板流变仪、力学性能测试、ＳＥＭ等方法对共混物进行了研究。共混后强度、模量均有提高,在高剪切速率下,共混物的粘度有所降低。扫描电镜照片显示,共混物具有“皮芯”结构。     

聚丙撑碳酸酯增韧环氧树脂的研究

研究了聚丙撑碳酸酯（ＰＰＣ）对环氧树脂（ＥＰ）的改性作用、加入２０～３０Ｐｈｒ的ＰＰＣ，环氧树脂力学性能可以大幅度提高，粘接剪切强度为１２３３ＭＰａ，冲击强度为１６．７８ｋＪ／ｍ２；而纯环氧树脂固化物，其剪切强度为９．３６ＭＰａ，冲击强度为９．９９ｋＪ／ｍ２。ＳＥＭ和ＤＳＣ观测表明ＰＰＣ／ＥＰ体系呈两相结构。     

界面相互作用对尼龙6／聚乙烯共混物形态结构和流变行为的影响

利用扫描电子显微镜和动态力学分析仪研究了马来酸酐熔融接枝聚乙烯（ＰＥ－ｇ－ＭＡ）对尼龙６／聚乙烯（ＰＡ６／ＰＥ）共混物形态结构和动态力学行为的影响．结果表明，ＰＥ－ｇ－ＭＡ使ＰＡ６／ＰＥ共混物中ＰＡｅ的玻璃化转变峰向低温例偏移，这主要归因于ＰＥ－ｇ－ＭＡ改善了ＰＡ６和ＰＥ二者的相容性；但随着ＰＥ分散相中ＰＥ－ｇ－ＭＡ所占比重的增加，ＰＥ－ｇ－ＭＡ与ＰＡ６之间界面化学键合密度增大，使得ＰＡ６的玻璃化转变温度反而提高．同时，利用平行板流交仪研究了ＰＥ－ｇ－ＭＡ对ＰＡ６／ＰＥ共混物熔体流变行为的影响．ＰＥ－ｇ－ＭＡ使共混物熔体粘度和动态储能模量增大，这应归因于ＰＡ６／ＰＥ－ｇ－ＭＡ之间在熔融共混过程中的界面化学键合．     

高密度聚乙烯与乙烯丙烯辛烯—1共聚物共混体系的相容性

用ＤＳＣ和ＷＡＸＤ方法研究了高密度聚乙烯／聚（乙烯丙烯辛烯－１）（ＨＤＰＥ／ＥＰＯ）共混体系的结晶性能。共混物的ＤＳＣ曲线皆呈单峰，表明共混体系形成了共晶。晶胞参数ａ及结晶度随共混物组成而变，进一步证明ＨＤＰＥ／ＥＰＯ共混体系的相容性。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.