季铵盐型表面活性剂的合成及物化性能测定

从脂肪酸和N-(2-羟乙基)乙二胺开始,经过咪唑啉中间体,合成了12种未见文献报道的新化合物,其中3种为具有不同类型特性基团的新型两性表面活性剂、3种为新型阳离子表面活性剂,并测定了它们的物化性能。     

1,2-二甲基咪唑啉的合成及表征

对1,2-二甲基咪唑啉的合成进行了详细研究. 以甲胺水溶液和2-溴乙胺氢溴酸盐(1)为原料进行反应, 在两种原料物质的量之比为5∶1, 缓缓回流12 h的条件下, 得到N-甲基乙二胺(2), N-甲基乙二胺经过乙酸化得到N-甲基-N,N′-二乙酰基乙二胺(3), 然后, N-甲基-N,N′-二乙酰基乙二胺和氧化钙在高温下关环得到1,2-二甲基咪唑啉(4). 并对所得到的产物1,2-二甲基咪唑啉经元素分析, 1H NMR, IR和GC-MS得到了表征.     

以螺吡喃衍生物原位合成的席夫碱配体的铜配合物的制备及表征

在Cu2+存在条件下,利用N-羟乙基-3,3-二甲基-6-硝基吲哚啉螺吡喃分别与乙二胺分子或1,3-丙二胺分子(1,3-diamino-propane,1,3-DAP)发生原位反应,得到了席夫碱配体双-((2-(甲基亚胺甲基)-4-硝基苯酚))阴离子(L1)或2-((3-胺基丙基亚胺)-甲基)-4-硝基苯酚阴离子(L2...     

甲基取代的甲酸态的四氢叶酸辅酶模型的合成及其取代碳单元转移反应

以乙二胺和乙酰胺为原料,经4步反应合成了碘化1,2-二甲基-3-间(或对)-硝基苯磺酰基咪唑啉(2a,2b),以2a和2b作为甲基取代的甲酸态四氢叶酸辅酶模型,同单亲核中心的氮亲核体(对甲苯胺,对甲氧基苯胺等)和碳亲核体(丙二腈)反应得到次乙基单元(CH₃-C>)转移的中间体产物;与双亲核中心的亲核体(邻苯二胺,邻氨基酚)反应得到次乙基单元完全转移的产物。     

苯并咪唑开环反应研究

本课题组曾首次报道过咪唑啉的还原开环反应[1],2-烷基-2-咪唑啉在硼氢化钠作用下生成开环产物--乙二胺衍生物.通过对这一新反应的研究,提出了通过咪唑啉制备N-取代乙二胺、N,N-二取代乙二胺、4-取代二亚乙基三胺等乙二胺衍生物简便的新合成方法.在此基础上,我们对苯并咪唑衍生物进行了类似的反应研究,希望通过其开环反应制备N-取代邻苯二胺、N,N'-多取代邻苯二胺衍生物.     

表面活性剂与油相动态界面张力影响因素研究

对不同类型表面活性剂烷基糖苷(APG1214)、咪唑啉(IAS)、十二烷基苯磺酸钠(SDBS)、烷基酚醚羧酸盐(ss-231)的油水动态界面张力进行了研究。在60℃,5 000 r·min-1条件下,考察了表面活性剂的浓度、表面活性剂的结构、正构烷烃碳数以及原油中活性物质对形成低界面张力影响。实验结果表明:表面活性剂亲水基的亲水性越强,亲水基之间排斥力越小,使得在油水界面排布的密度越大,降低界面张力的效果会更好;当表面活性剂疏水碳链与烷烃碳链相似时,降低界面张力的效果会更明显;无碱体系中原油中的活性物质可在油水界面上形成粘弹性界面膜,这种界面膜的形成减少了表面活性剂分子在界面的吸附,使界面张力升高。     

链型氮氧杂醇酚胺多齿配体Cu(Ⅱ)和Zn(Ⅱ)配合物催化NA酯水解研究

在 2 5± 0 .1℃ ,I(KNO3) =0 .1 0 mol/ L ,p H=6 .5～ 9(5 0 mmol/ L缓冲溶液 )条件下 ,用分光光度法测定了含醇羟基和酚羟基链型氮氧杂配体 N,N -二 -(2 -羟乙基 ) -乙二胺 (L1)和 N-(2 -羟基苄基 ) -3-氨基 -1 -丙醇 (HL2 )的 Cu( )配合物及 N -(2 -羟乙基 ) -N -(2 -羟基苄基 ) -乙二胺 (HL3)和 N -(2 -羟乙基 ) -二乙三胺(L4 )的 Zn( )配合物催化对硝基苯酚乙酸酯 (NA)水解动力学 ,得到了 NA酯催化水解二级反应速率常数k C.结果表明 ,在中性 p H值附近生成的配位烷氧负离子 Cu( )…… - OR和 Zn( )…… - OR均为很好的亲核试剂 .配合物对 NA酯水解有亲核试剂进攻和金属离子作为 L ewis酸活化底物的双重催化作用 ,k C 值可分别达到 6 .72× 1 0 - 2 ,0 .1 2 6 ,4.5 5× 1 0 - 2 和 7.6 6× 1 0 - 2 mol- 1·L· s- 1.     

流动条件下两种不同亲水基团咪唑啉型缓蚀剂的缓蚀性能

选择了两种含有不同亲水基团的咪唑啉型缓蚀剂, 即1-胺乙基-2-十一烷基咪唑啉(AEI-11)和1-羟乙基-2-十一烷基咪唑啉(HEI-11), 分别在静态及动态条件下,采用失重法、极化曲线法、电化学阻抗谱法研究了上述缓蚀剂对N80钢在CO2饱和的3%(w)NaCl溶液中的缓蚀性能. 研究结果表明, 无论在静态和动态条件下, HEI-11均表现出更佳的缓蚀性能, 即咪唑啉型缓蚀剂的缓蚀性能与亲水基团的极性成正比; 在流动条件为5 m·s-1时, 缓蚀剂的缓蚀效率显著降低. 为了进一步研究缓蚀剂的缓蚀性能与其结构的关系, 运用量子化学法计算了缓蚀剂的EHOMO(最高占有分子轨道)、ELUMO(最低空分子轨道), 结果表明缓蚀剂的缓蚀效率与EHOMO成正比, 与ELUMO及ELUMO与EHOMO的差值驻E成反比.     

酸性离子液体催化合成N-氰乙基-N-羟乙基苯胺

N-氰乙基-N-羟乙基苯胺是一种具有广泛用途的染料中间体,针对传统合成方法中的缺陷,以1-丁基-3-甲基咪唑硫酸氢盐([BMIM]HSO 4)为催化剂,丙烯腈和N-羟乙基苯胺为原料,建立了N-氰乙基-N-羟乙基苯胺的绿色合成新工艺。系统考察了离子液体种类、离子液体用量、底物比例等因素的影响规律,结果表明,[BMIM]HSO 4用量为0.8 mmol,n(N-羟乙基苯胺)∶[KG-*3/5]n(丙烯腈)=1∶[KG-*3/5]1.2,反应温度为90℃,反应时间为12 h时,N-氰乙基-N-羟乙基苯胺产率最高(89%),离子液体循环使用5次后,催化活性基本保持不变。     

咪唑类含能离子液体的合成及性能研究

以N-甲基咪唑、1,2-二甲基咪唑和2-氯乙醇为原料,经季铵化、硝化和复分解反应,合成了一系列咪唑类含能离子液体.通过紫外可见光谱、红外光谱、质谱、核磁共振和元素分析等对结构进行了表征.研究了其在常用有机溶剂中的溶解性,结果表明所合成的咪唑类含能离子液体在极性溶剂中具有良好的溶解性.采用热重分析法和差示扫描量热法研究了其热性能,结果表明所合成的含能离子液体具有良好的热稳定性,其中N-硝酰氧乙基咪唑硝酸盐的分解温度均在160℃左右,而N-羟乙基咪唑离子盐的分解温度均超过了190℃.差示扫描量热技术(DSC)实验表明,1-(2-硝酰氧乙基)-3-甲基咪唑硝酸盐和N-羟乙基咪唑类离子盐在二次升温过程中均发生了玻璃化转变,表现出了离子液体的特有性质.采用Kamlet-Jacobs方程估算了合成的含能离子液体的爆速和爆压等爆轰参数.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.