以喹啉为耦合单元双自由基体系的理论研究

设计用4种自由基自旋中心连接在耦合单元喹啉的不同位置上的双自由基体系,用AM1-CI方法计算的结果表明:双自由基连接的位置不同对体系耦合作用的影响符合双自由基之间磁性耦合的拓扑规则,即共轭体系中,两个自由基之间以偶数个C(或N)原子耦合,体系具有低自旋基态,表现反铁磁耦合;两个自由基之间以奇数个C(或N)原子耦合,体系具有高自旋基态,表现铁磁耦合.当双自由基连接在喹啉的相邻奇数个C或N原子位置时,体系具有高自旋基态,表现铁磁耦合.     

双自由基间苯体系铁磁分子设计

采用量子化学从头算UHF方法对不同组成的双自由基及其异构体进行了系统比较,进而对系列双自由基体系的基态自旋耦合规律进行了研究,并讨论了具有空间位阻的顺反异构现象对双自由基自旋耦合的影响。对以双自由基为基础的有机铁磁体的合成具有指导意义。     

邻、间、对-二甲氧基亚甲基苯及衍生物双自由基体系的自旋耦 合规律

采用量子化学abinitio法对具有甲氧基的碳、氧双自由基邻、间、对二甲氧基亚甲基苯及衍生物体系基态自旋耦合规律进行研究,得到非平面共轭体系中自由基之间磁性耦合的拓朴规则:共轭体系中,两个自由基之间以偶数个碳原子耦合,则有效交换积分J~i~j<0,体系具有低自旋基态;两个自由基之间以奇数个碳原子耦合,则J~i~j>0,体系具有高自旋基态。自由基性质对自旋耦合的影响较大,正离子自由基间磁性耦合能力较强,这些结论为有机磁性材料的分子设计与实验合成提供了理论依据。     

构型与构象对苯双自由基体系基态自旋多重度及其稳定性的影响

利用AM1-CI方法计算了构象对邻、间、对二取代苯双自由基体系基态自旋多重度及其稳定性的影响. 结果表明单 - 三重态能量差(△ES－T)和部分占据分子轨道的能量劈裂(△EPOMO)随自由基与苯环间的二面角而变化. 当二面角接近90°时, 分子具有平面或近平面构象时强的铁磁或反铁磁耦合单元, 由于具有近简并的高自旋和低自旋基态, 而变成弱的反铁磁或铁磁耦合单元. 由此提出为获得具有稳定高自旋基态的高自旋分子, 实验上应尽量避免选用强烈扭曲的邻、对苯分子构象.     

对嘧啶的邻、间、对位双自由基体系的自旋耦合规律的研究

采用量子化学abinitio法和密度泛函方法对不同取代位置的嘧啶自旋耦合规律进行研究 .两种方法比较 ,用UHF方法计算导致自旋污染严重 ,而用UB3LYP方法计算 ,自旋污染则减少了许多 .计算结果得到了双自由基之间磁性耦合的拓扑规则 :共轭体系中 ,两个自由基之间以偶数个碳 (或氮 )原子耦合 ,则有效交换积分Jij<0 ,体系具有低自旋基态 ,表现为反铁磁耦合 ;两个自由基之间以奇数个碳 (或氮 )原子耦合 ,则有效交换积分Jij>0 ,体系具有高自旋基态 ,表现为铁磁耦合 .自由基性质和铁磁耦合单元的不同位置对自旋耦合的影响较大 ,这些结论为有机磁性材料的分子设计与实验合成提供了理论依据 .     

构象对同位乙烯双自由基体系基态自旋多重度及其稳定性影响的理论研究

用DFT,CASSCF和QCISD(T)方法6-31G^*基组计算了构象对同位二取代乙烯双自由基体系基态自旋多重度及其稳定性的影响.结果表明,用DFT或CASSCF方法计算的单、三重态的能量差随自由基与乙烯间的二面角增加成不规则变化;用QCISD(T)方法计算的单、三重态的能量差随二面角的增加而逐渐降低,并呈规律性变化,说明QCISD(T)方法用于计算分子的磁性是可信的.对于同位二取代乙烯双自由基体系,无论双自由基旋转,还是单自由基旋转,高自旋基态稳定性随自由基与乙烯间二面角的增加而降低,只是降低的幅度不同,当二面角接近90°时,同位乙烯由具有平面或近似平面构象时强的铁磁耦合单元变成接近垂直平面构象时弱的反铁磁耦合单元或弱的铁磁耦合单元.     

有机双自由基体系的磁性偶合规律

采用量子化学从头算UHF方法对系列有机双自由基体系的基态自旋耦合规律进行研究, 进一步证实了自由基之间在共轭体系中出现铁磁性耦合的拓扑规则,统一了关于自由基耦合规律的几种解释, 为有机磁性材料的实验合成提供了理论指导。     

有机双自由基体系的磁性偶合规律

采用量子化学从头算UHF方法对系列有机双自由基体系的基态自旋耦合规律进行研究, 进一步证实了自由基之间在共轭体系中出现铁磁性耦合的拓扑规则,统一了关于自由基耦合规律的几种解释, 为有机磁性材料的实验合成提供了理论指导。     

卟啉双荧光行为的初步研究

采用基态吸收光谱及荧光光谱研究了5,10,15,20-四对溴苯基锌卟啉(ZnTPPBr)的双荧光行为, 并分别通过它与C₆₀及二茂铁(Fc)的双分子荧光猝灭反应, 发现S2态荧光猝灭行为可部分转移并保留在S₁态中, 从而影响S₁态的荧光猝灭规律. 这个结果与 化学诱导动态电子极化(CIDEP)中前体所产生的自由基对或三重态的自旋极化会转移并保留在产物中的现象类似, 并为研究寿命短, 荧光量子产率低的高级激发态提供了一种新的思路.     

多核过渡金属配合物自旋阻挫的理论研究

区别于双核配合物，自旋阻挫是多核配合物重要的磁现象之一．在分子磁体系中，自旋阻挫引起体系基态的多变和简并以及可能的基态自旋中间值等特征．简要地介绍多核配合物磁耦合竞争自旋阻挫的理论研究进展．     

Ethanol loading in an inductively coupled plasma

Changes to the fundamental and analytical parameters of a plasma have been investigated when ethanol has been added to aqueous or organic solutions. Excitation temperature, electron number density, and intensity of the H(alpha) line increased when ethanol has been added to aqueous solutions, while an electron density decrease and signal reduction have been found when ethanol has been added to xylene. The sensitivity has been improved for all ethanol concentrations when water has been the solvent, but the reverse has been found for xylene solutions.     

Phase structure of silanol-modified ethylene-vinyl acetate copolymers

For (ethylene-vinyl acetate copolymer)-tetraethoxysilane and (ethylene-vinyl acetate copolymer)-polydimethylsiloxane systems, the solubility of components has been studied in a wide range of temperatures and compositions. Phase diagrams have been constructed, pair interaction parameters have been calculated, and diffusion coefficients and activation energies of diffusion have been estimated. The temperature and concentration ranges of a change in solubility related to chemical interactions between the components have been revealed, and the structure of the modified copolymers has been studied. On the basis of the kinetic data on the movement of isoconcentration planes in diffusion zones of component mixing, time intervals corresponding to the onset of the chemical reaction between the components have been determined and the apparent activation energies of the process have been computed. Complex-shaped binodal and boundary curves have been interpreted within the framework of the classical Flory-Huggins theory.     

Overpressured thin-layer chromatography

The properties, apparatus and applications of overpressured thin-layer chromatography (OPTLC) have been reviewed. In the Introduction planar chromatography has been briefly characterized, with particular attention to TLC. The general properties of OPTLC and methods of development of chromatograms in this technique have been then given. The construction of chambers and equipment for OPTLC has been described, paying attention to two-dimensional columns. The properties of chambers for OPTLC have been characterized considering the flow of eluent, sorbent-eluent interactions and the efficiency of various systems. OPTLC, TLC and HPTLC have been compared and also a comparison between OPTLC with a constant (linear) eluent flow-rate and with a decreasing eluent flow-rate has been made. Analytical applications of OPTLC have been described and examples of separations of mixtures have been given.     

Facile synthesis methodology and characterization studies of silica-decorated hybridized anisotropic nanotubes and nanosheets

Carbonaceous nanomaterials and their derivatives have been inspired tremendous enthusiasm in the scientific community. They have been excogitated as the encouraging attributes and the qualified dispersed phase to develop multi-functional composites. Particularly, graphene and carbon nanotube (anisotropic fillers) have gained substantial research interest owing to their promising characteristics. This highlights an innovative technique to synthesize hybridized nanotube and nanosheet. Initially, parent materials have been synthesized: The pristine CNT has been modified by acid mixture solution, and reduced graphene oxide has been prepared by chemical reduction method. Henceforth, the self-assembly in situ sol–gel technique has been endorsed here. The synthesized nanohybrids have been characterized by different spectroscopic techniques: FTIR, Raman, UV, and XPS to confirm the attachment of multifunctionalities; meanwhile, the composition and stability have been investigated from XRD and TGA plots. The magnitude of surface charge and particle size distribution have been evaluated for the parent and hybridized products; further, morphology of all the samples has been authenticated from FESEM and TEM.     

Electron microtomography: A new method for studying the spatial structure of catalysts

The spatial arrangement of active component (Pt) particles on the surface of a support (Sibunit globule) has been studied by bright-field electron tomography. A tomographic attachment for a standard specimen holder and tomographic grids have been designed. The tomographic procedure has been refined, and adequate tilt series alignment and tomographic reconstruction algorithms have been chosen. The 3D distribution of the active component in the catalyst grain has been studied: particles hidden in micropores have been directly observed, and the size of the pores connecting internal cavities with the exterior has been estimated.     

Ethanol loading in an inductively coupled plasma

Changes to the fundamental and analytical parameters of a plasma have been investigated when ethanol has been added to aqueous or organic solutions. Excitation temperature, electron number density, and intensity of the H line increased when ethanol has been added to aqueous solutions, while an electron density decrease and signal reduction have been found when ethanol has been added to xylene. The sensitivity has been improved for all ethanol concentrations when water has been the solvent, but the reverse has been found for xylene solutions.     

Action of trypsin on a nucleoprotein from sturgeon gonads

A nucleoprotein has been isolated from the gonads of the Caspian sturgeon and its composition has been determined. It has been shown that it contains 55% of DNA, 2% of RNA, 36% of protamines, and about 7% of nonprotamine proteins of nonbasic nature. The nucleoprotein has been hydrolyzed with trypsin, and the amino acid compositions of some hydrolysis products have been studied. On the basis of the results obtained, the hypothesis has been put forward of a possible linkage of the DNA with the basic proteins. It has been shown that protamines react with the DNA through the basic amino acid residues located at various regions of their molecules.     

Kinetics and mechanism of the production of higher olefins from stearic acid in the presence of an alumina-supported nickel sulfide catalyst

A nickel sulfide catalyst which efficient in the decarbonylation of fatty acids to olefins and dienes has been obtained for the first time by treating alumina-supported nickel sulfate with hydrogen, and its properties have been studied. In its presence, the olefin selectivity of the reaction can exceed 90%. The kinetics of stearic acid deoxygenation to heptadecenes has been investigated, a kinetic model has been constructed, and a mechanism has been proposed for the reaction over this catalyst. Olefin oligomerization is the dominant side reaction. Kinetic evidence for the catalytic inhibition of oligomerization by nickel hydrides formed on the catalyst has been obtained. The compositions of active site–reactant adsorption complexes have been discussed.     

Structural defects in poly(vinylchloride)—III. Degradation of vinyl chloride-phenylacetylene copolymers in solution

Vinylchloride-phenylacetylene copolymers have been prepared and characterized. A known amount of defined defect sites, viz. double bonds, has been introduced into the main chain of the polymer. Thermal degradation behaviour of the copolymers has been studied in trichlorobenzene solution. A strong dependence of the kinetics of dehydrochlorination and polyene formation on the defect concentration has been found. Rate constants and activation parameters have been determined. The effects of different structures have been compared.     

On temperature- and space-dimension dependent matter agglomerations in a mature growing stage

Model matter agglomerations, with temperature as leading control parameter, have been considered, and some of their characteristics have been studied. The primary interest has been focused on the grain volume fluctuations, the magnitude of which readily differentiates between two commonly encountered types of matter agglomeration/aggregation processes, observed roughly for high- and low-density matter organizations. The two distinguished types of matter arrangements have been described through the (entropic) potential driving the system. The impact of the potential type on the character of matter agglomeration has been studied, preferentially for (low-density) matter aggregation for which a logarithmic measure of its speed has been proposed. A common matter diffusion as well as mechanical relaxation picture, emerging during the mature growing stage, has been drawn using a phenomenological line of argumentation. Applications, mostly towards obtaining soft agglomerates or so-called jammed materials, have been mentioned.