Spherical Zn2SiO4:Eu@SiO2 phosphor particles in core-shell structure: Synthesis and characterization

Spherical SiO₂ particles have been coated with Zn₂SiO₄:Eu³⁺ phosphor layers by a Pechini sol-gel process. The microstructure and luminescent properties of the obtained Zn₂SiO₄:Eu³⁺@SiO₂ particles were well characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), photoluminescence (PL) spectra, and lifetime. The results demonstrate that the Zn₂SiO₄:Eu³⁺@SiO₂ particles, which have regular and uniform spherical morphology, emitted an intensive red light emission at 613 nm under excitation at 395 nm. Besides, the effects of the Eu³⁺ concentration, annealing temperature and charge compensators of Li⁺ ions on the PL emission intensities were investigated in detail.     

Prepare high efficiency Mn-doped Zn2SiO4 green phosphors in air using nano-particles

In this study, nano-scale precursors of ZnO, SiO₂, and MnO₂ powders were used to prepare mixtures with the compositions of 2ZnO+SiO₂+X mol% MnO₂ (X=MnO₂/2ZnO, abbreviated as Zn₂SiO₄-X-MnO₂), where 2≤X≤5. The mixed Zn₂SiO₄-X-MnO₂ mixtures were calcined from 900 to 1300 °C in air in order to synthesize Zn₂SiO₄:Mn²⁺ green phosphors. The X-ray diffraction patterns of Zn₂SiO₄-X-MnO₂ particles indicated that ZnO was present in the 900 °C-calcined Zn₂SiO₄-X-MnO₂ phosphors, but not in particles calcined at temperatures of 1000 °C and higher. However, the unapparent secondary phase of ZnMnO₃ was found in the 1200 and 1300 °C-calcined Zn₂SiO₄-5-MnO₂ compositions. The luminescent characteristics of Zn₂SiO₄-X-Mn²⁺ phosphors were compared with that of a commercial product (Nichia Corp., Japan). The photoluminescence (PL) intensity of 1200 °C-calcined Zn₂SiO₄-4-MnO₂ phosphors was higher and the decay times of all synthesized Zn₂SiO₄-X-MnO₂ phosphors were longer than those of the commercial product.     

Degradation of Y2SiO5:Ce phosphor powders

The degradation of the cathodoluminescence (CL) intensity of cerium-doped yttrium silicate (Y₂SiO₅:Ce) phosphor powders was investigated for possible application in low voltage field emission displays (FEDs). Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS) and CL spectroscopy were used to monitor changes in the surface chemical composition and luminous efficiency of commercially available Y₂SiO₅:Ce phosphor powders. The degradation of the CL intensity for the powders is consistent with a well-known electron-stimulated surface chemical reaction (ESSCR) model. It was shown with XPS and CL that the electron stimulated reaction led to the formation of a luminescent silicon dioxide (SiO₂) layer on the surface of the Y₂SiO₅:Ce phosphor powder. XPS also indicated that the Ce concentration in the surface layer increased during the degradation process and the formation of CeO₂ and CeH₃ were also part of the degradation process. The CL intensity first decreased until about 300 C cm⁻² and then increased due to an extra peak arising at a wavelength of 650 nm.     

A facile synthesis of monodisperse CoFe2O4/SiO2 nanoparticles

Aminated-CoFe₂O₄/SiO₂ magnetic nanoparticles (NPs) were prepared from primary silica particles using modified StÖber method. By optimizing the preparation conditions, monodisperse CoFe₂O₄/SiO₂ NPs with high amino groups’ density were obtained, which is necessary for enzyme immobilization. TEM confirm that the sample is a core/shell structure. These aminated-CoFe₂O₄/SiO₂ NPs have narrow size distributions with a mean size of about 60 nm. Moreover, the aminated-CoFe₂O₄/SiO₂ NPs can be easily dispersed in aqueous medium. The experimental results also show that the NPs have superparamagnetism, indicating that the aminated-CoFe₂O₄/SiO₂ NPs can be used as an effective carrier for the enzyme immobilization.     

Preparation and characterization of Zn2SiO4: Mn phosphors with hydrothermal methods

Mn²⁺-doped Zn₂SiO₄ phosphors had been prepared by hydrothermal method in stainless-steel autoclaves. Effects of synthesized methods, reaction temperature, ambience of heat treatment on the structure and the luminescence properties of this silicate were studied with X-ray diffraction apparatus (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM) and fluorescence spectrum. Results show that Zn₂SiO₄ nanocrystalline can be obtained by hydrothermal method at relatively low temperatures. The absorption pattern shows an absorption edge at about 380 nm originated from ZnO crystals and two absorption bands at about 215 and 260 nm. Mn²⁺-doped Zn₂SiO₄ has a luminescence band with the wavelength at about 522 nm under 255 nm excitation, and the luminescent intensity increases after being heat treated.     

Enhanced photoluminescence properties of Zn2SiO4:Mn co-activated with Y/Li under VUV excitation

A series of green phosphors Zn_1.92−2xY_xLi_xSiO₄:0.08Mn²⁺ (0≤x≤0.03) were prepared by solid-state synthesis method. Phase and lattice parameters of the synthesized phosphors were characterized by powder X-ray diffractometer (XRD) and the co-doped effects of Y³⁺/Li⁺ upon emission intensity and decay time were investigated under 147 nm excitation. The results indicate that the co-doping of Y³⁺/Li⁺ has favorable influence on the photoluminescence properties of Zn₂SiO₄:Mn²⁺, and the optimal photoluminescence intensity of Zn_1.90Y_0.01Li_0.01SiO₄:0.08Mn²⁺ is 103% of that of commercial phosphor when the doping concentration of Y³⁺/Li⁺ is 0.01 mol. Additionally, the decay time of phosphor is much shortened and the decay time of Zn_1.90Y_0.01Li_0.01SiO₄:0.08Mn²⁺ is 3.39 ms, shorter by 1.83 ms than that of commercial product after Y³⁺/Li⁺ co-doping.     

XPS investigation of diffusion of two-layer ZrO2/SiO2 and SiO2/ZrO2 sol–gel films

Two-layer ZrO₂/SiO₂ and SiO₂/ZrO₂ films were deposited on K9 glass substrates by sol–gel dip coating method. X-ray photoelectron spectroscopy (XPS) technique was used to investigate the diffusion of ZrO₂/SiO₂ and SiO₂/ZrO₂ films. To explain the difference of diffusion between ZrO₂/SiO₂ and SiO₂/ZrO₂ films, porous ratio and surface morphology of monolayer SiO₂ and ZrO₂ films were analyzed by using ellipsometry and atomic force microscopy (AFM). We found that for the ZrO₂/SiO₂ films there was a diffusion layer with a certain thickness and the atomic concentrations of Si and Zr changed rapidly; for the SiO₂/ZrO₂ films, the atomic concentrations of Si and Zr changed relatively slowly, and the ZrO₂ layer had diffused through the entire SiO₂ layer. The difference of diffusion between ZrO₂/SiO₂ and SiO₂/ZrO₂ films was influenced by the microstructure of SiO₂ and ZrO₂.     

XPS analysis for degraded Y2SiO5:Ce phosphor thin films

X-ray photoelectron spectroscopy (XPS) results were obtained for standard Y₂SiO₅:Ce phosphor powders as well as undegraded and 144 h electron degraded Y₂SiO₅:Ce pulsed laser deposited (PLD) thin films. The two Ce 3d peaks positioned at 877.9 ± 0.3 and 882.0 ± 0.2 eV are correlated with the two different sites occupied by Ce in the Y₂SiO₅ matrix. Ce replaced the Y in the two different sites with coordination numbers of 9 and 7. The two Ce 3d XPS peaks obtained during the thin film analysis were also correlated with the luminescent mechanism of the broad band emission spectra of the Y₂SiO₅:Ce X₁ phase. These two different sites are responsible for the two main sets of cathodoluminescent (CL) and photoluminescence (PL) peaks situated at wavelengths of 418 and 496 nm. A 144 h electron degradation study on the Y₂SiO₅:Ce thin film yielded an increase in the CL intensity with a second broad emission peak emerging between 600 and 700 nm. XPS analysis showed the presence of SiO₂ on the surface that formed during prolonged electron bombardment. The electron stimulated surface chemical reaction (ESSCR) model is used to explain the formation of this luminescent SiO₂ layer.     

Low voltage electron induced cathodoluminescence degradation and surface characterization of Sr3(PO4)2:Tb phosphor

Tb³⁺-doped Sr₃(PO₄)₂ phosphor was prepared by a sol-gel combustion method. A trigonal structure having Sr and O atoms occupying two different lattice sites were obtained. Scanning Auger nanoprobe was used to analyze the morphology of the particles. Photoluminescence (PL) and cathodoluminescence (CL) properties of Sr₃(PO₄)₂:Tb powder phosphors were evaluated and compared. In addition, the CL intensity degradation of Sr₃(PO₄)₂:Tb was evaluated when the powders were irradiated with a beam of electrons in a vacuum chamber maintained at an O₂ pressure of 1 × 10⁻⁶ Torr or a background pressure of 1 × 10⁻⁸ Torr O₂. The surface chemical composition of the degraded powders, analyzed by X-ray photoelectron spectroscopy (XPS), suggests that new compounds (metal oxides) of strontium and phosphorous were formed on the surface. It is most likely that these compounds contributed to the CL intensity degradation of the Sr₃(PO₄)₂:Tb phosphors. The CL properties and possible mechanism by which the new metal oxides were formed on the surface due to a prolonged electron beam irradiation are discussed.     

Structural phase transition behaviour of ZnaSb3 and its substitutional compounds （Zn0.98M0.02）4Sb3 （M = Al,Ga and In） at low temperatures

Structural phase transitions of Zn4Sb3 and its substitutional compounds (Zn0.98M0.02)4Sb3 (M = Al, Ga and In) are investigated by electrical transport measurement and differential scanning calorimetry below room temperature. The results indicate that both β→α and α→α′ phase transitions of Zn4Sb3 are reversible and exothermic processes, which may be explained as that both the transitions originate from the ordering of the disordered interstitial Zn and vacancies in regular sizes. The derived activation energies of β→α and α→α′ phase transition processes for Zn4Sb3 are E1 = 3.9 eV and E2 = 4.1 eV, respectively. Although no remarkable influence on activation energy E2 is observed after Al doping, Al substitution for Zn causes E1 to increase to 4.6 eV, implying its suppression of βα transition to a great extent. Moreover, it is found that both βα and αα′ transitions are completely prohibited by substitution of either In or Ga for Zn in Zn4Sb3. The underlying mechanisms for these phenomena are discussed.     

Facile fabrication of Zn/Zn5(OH)8Cl2·H2O flower-like nanostructure on the surface of Zn coated with poly (N-methyl pyrrole)

Zn/Zn₅(OH)₈Cl₂·H₂O flower-like nanostructures was electrodeposited on the coated Zn with poly (N-methyl pyrrole) in 0.1 M Zn (NO₃)₂ and 0.1 M KCl solution. The morphology and the structure of the Zn/Zn₅(OH)₈Cl₂·H₂O were characterized by Field Emission Scanning Electron Microscopy (FESEM), Fourier transform infrared (FT-IR) spectroscopy and X-ray diffraction analysis (XRD). The FT-IR results showed special peaks at 908 and 728 cm⁻¹ related to Zn₅(OH)₈Cl₂·H₂O. The FESEM results indicated that Zn/Zn₅(OH)₈Cl₂·H₂O consists of a flower-like nanostructure and these flower-shaped structures contain many shaped nanopetals with the thickness of 27.8 nm. The XRD result confirmed that the major phase of electrodeposited product in 0.1 M KCl as supporting electrolyte was Zn₅(OH)₈Cl₂·H₂O. The ability of PMPy to create a thin film and the existence of several pores in its matrix act as a mold for the growth of Zn/Zn₅(OH)₈Cl₂·H₂O flower-like nanostructure. The trapping of Cl⁻ and OH⁻ within pores can be considered as the reason for the formation of flowerlike Zn/Zn₅(OH)₈Cl₂·H₂O nanostructures in 0.1 M KCl.     

Immobilization of glucose oxidase using CoFe2O4/SiO2 nanoparticles as carrier

Aminated-CoFe₂O₄/SiO₂ magnetic nanoparticles (NPs) were prepared from primary silica particles using modified StÖber method. Glucose oxidase (GOD) was immobilized on CoFe₂O₄/SiO₂ NPs via cross-linking with glutaraldehyde (GA). The optimal immobilization condition was achieved with 1% (v/v) GA, cross-linking time of 3 h, solution pH of 7.0 and 0.4 mg GOD (in 3.0 mg carrier). The immobilized GOD showed maximal catalytic activity at pH 6.5 and 40 °C. After immobilization, the GOD exhibited improved thermal, storage and operation stability. The immobilized GOD still maintained 80% of its initial activity after the incubation at 50 °C for 25 min, whereas free enzyme had only 20% of initial activity after the same incubation. After kept at 4 °C for 28 days, the immobilized and free enzyme retained 87% and 40% of initial activity, respectively. The immobilized GOD maintained approximately 57% of initial activity after reused 7 times. The K_M (Michaelis-Menten constant) values for immobilized GOD and free GOD were 14.6 mM and 27.1 mM, respectively.     

Synthesis and characterization of monodisperse spherical core-shell structured SiO2@Y3Al5O12:Ce3+/Tb3+ phosphors for field emission displays

Nanocrystalline Y₃Al₅O₁₂: Ce³⁺/Tb³⁺ (average crystalline size 30 nm) phosphor layers were coated on non-aggregated, monodisperse and spherical SiO₂ particles by the sol-gel method, resulting in the formation of core-shell structured SiO₂@Y₃Al₅O₁₂:Ce³⁺/Tb³⁺ particles. X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, photoluminescence, cathodoluminescence spectra, as well as lifetimes were utilized to characterize the core-shell structured SiO₂@Y₃Al₅O₁₂:Ce³⁺/Tb³⁺ phosphor particles. The obtained core-shell structured phosphors consist of well-dispersed submicron spherical particles with a narrow size distribution. The thickness of the Y₃Al₅O₁₂:Ce³⁺/Tb³⁺ shells on the SiO₂ cores (average size about 500 nm, crystalline size about 30 nm) could be easily tailored by varying the number of deposition cycles (100 nm for four deposition cycles). Under the excitation of ultraviolet and low-voltage electron beams (1–3 kV), the core-shell SiO₂@Y₃Al₅O₁₂:Ce³⁺/Tb³⁺ particles show strong yellow-green and green emission corresponding to the 5d–4f emission of Ce³⁺ and ⁵D₄–⁷F _J (J = 6, 5, 4, 3) emission of Tb³⁺, respectively. These phosphors may have potential application in field emission displays.     

磁控共溅射法制备的Zn2GeO4多晶薄膜结构及其光致发光研究

用射频磁控共溅射方法在不同温度的单晶硅基片上生长薄膜,然后在800℃真空环境下对薄膜进行退火处理,成功获得了结晶状态良好的Zn₂GeO₄多晶薄膜.利用X射线衍射(XRD),X射线光电子能谱(XPS)和原子力显微镜(AFM)对薄膜进行了结构、成分和形貌分析,研究了基片温度对三者的影响. 结果显示,当基片温度升高到400℃以上时,薄膜中的Zn₂GeO₄晶粒在(220)方向上显示出了明显的择优取向. 当基片温度在500—600℃范围内,有利于GeO₂结晶相的形成. XPS显示薄膜中存在着Zn₂GeO₄,GeO₂,GeO,ZnO四种化合态. 同时,随着基片温度的升高,晶粒尺寸增大且薄膜表面趋于平整. 薄膜的光致发光在绿光带存在中心波长为530和550nm两个峰,应该归因于主体材料Zn₂GeO₄中两个不同的Ge²⁺的发光中心. 关键词： 射频磁控溅射 2GeO₄')" href="#">Zn₂GeO₄ 荧光体     

Luminescence properties of Mn doped Zn2SiO4 phosphor films synthesized by combustion CVD

Zn₂SiO₄:Mn²⁺ phosphor films were successfully prepared by a novel combustion chemical vapor deposition (CCVD) method. In the CCVD process, a flammable solution, containing precursor materials, is atomized and sprayed through a specially designed nozzle and ignited to form a combustion flame. This enables crystallized films to be directly deposited onto a substrate in open-atmosphere with no post deposition heat treatment. SEM images indicated that the film deposited at 1200 °C consisted of densely packed particles with a fine grain size of several 100 nm. Strong Photoluminescence (PL) and cathodoluminescence (CL) intensities were observed with Zn₂SiO₄:Mn²⁺ samples deposited at a substrate temperature of 1200 °C exhibiting the best crystallinity and highest luminescence. The optimum doping level for films deposited using CCVD was found to be ∼4 mol% Mn²⁺ of starting concentration, with a maximum CL luminescence equivalent to 53% of the luminescence measured from a commercial powder phosphor. A relatively fast CL decay with life time about 0.6-0.7 ms was also observed from these films.     

Fine structure in the low temperature luminescence of Zn2SiO4:Mn and Mg4Ta2O9:Mn

The luminescence of powder samples of the well-known green-emitting Zn₂SiO₄:Mn and the red-emitting Mg₄Ta₂O₉:Mn phosphor shows a considerable fine structure at 4° K in appropriately prepared samples containing a sufficiently low Mn concentration. For (Zn_1-xMn_x)₂SiO₄ (0.0005?x?0.05) two sharp lines were found which are interpreted as due to zero phonon transitions between the ⁴T₁ and ⁶A₁ levels of Mn²⁺ ions on the two crystallographically different zinc sites. The remaining structure is ascribed to vibronic sidebands. The decay times of the luminescence bands associated with the two sites differ; they are 12 and 15 ms for the high and low energy bands respectively. The experimental results of Vlam are confirmed by our data. In addition some (Zn_1-yBe_y)₂SiO₄:Mn (0.025? y ?1) samples were investigated. In Mg₄Ta₂O₉:Mn two zero phonon lines could be identified, indicating that in this material Mn²⁺ is distributed over two inequivalent Mg sites. Most of the phonon replicas were found at intervals of 15 meV. Raman scattering experiments showed that this energy corresponds to one of the lattice vibrations. The decay time of this luminescence band is 1.0 ms.     

Preparation and characterization of novel Pd/SiO2 and Ca-Pd/SiO2 egg-shell catalysts with porous hollow silica

Novel egg-shell structured monometallic Pd/SiO₂ and bimetallic Ca-Pd/SiO₂ catalysts were prepared by an impregnation method using porous hollow silica (PHS) as the support and PdCl₂ and Ca(NO₃)₂·4H₂O as the precursors. It was found from transmission electron microscope (TEM), scanning electron microscope (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD) that Pd was loaded on PHS with a particle size of 5-12 nm in Pd/SiO₂ samples and the Pd particle size in Ca-Pd/SiO₂ was smaller than that in Pd/SiO₂ since Ca could prevent Pd particles from aggregating. X-ray photoelectron spectroscopy (XPS) analyses exhibited that Pd 3d_5/2 binding energies of Pd/SiO₂ and Ca-Pd/SiO₂ were 0.2 and 0.9 eV lower than that of bulk Pd, respectively, as a result of the shift of the electron cloud from Pd to oxygen in Pd/SiO₂ and to both oxygen and Ca in Ca-Pd/SiO₂. The activity of Ca-Pd/SiO₂ egg-shell catalyst for CO hydrogenation and the selectivity to methanol, with a value of 36.50 mmol_CO mol⁻¹_Pd s⁻¹ and 100%, respectively, were much higher than those of the catalysts prepared with traditional silica gel as the support, owing to the porous core-shell structure of the PHS support.     

Highly efficient transparent Zn2SiO4:Mn phosphor film on quartz glass

Highly efficient transparent Zn₂SiO₄:Mn²⁺ film phosphors on quartz substrates were deposited by the thermal diffusion of sputtered ZnO:Mn film. They show a textured structure with some preferred orientations. Our film phosphor shows, for the best photoluminescence (PL) brightness, a green PL brightness of about 20% of a commercial Zn₂SiO₄:Mn²⁺ powder phosphor screen. The film shows a high transmittance of more than 10% at the red-color region. The excellence in PL brightness and transmittance can be explained in terms of the textured crystal growth with a continuous gradient of Zn₂SiO₄: Mn²⁺ crystals.     

Hydrothermal synthesis and optical characteristics of Eu in Zn2SnO4 nanocrystals

Zn₂SnO₄:Eu³⁺ nanocrystals were one-step synthesized by hydrothermal method for the first time. All the products were systematically characterized by powder X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), electron probe X-ray microanalyzer (EPMA), photoluminescence (PL) and photoluminescent excitation (PLE). The characteristic peak of Eu³⁺-doped in Zn₂SnO₄ nanocrystals was also detected. The luminescent properties of blank and Eu³⁺-doped Zn₂SnO₄ nanocrystals were reported.     

Preparation and characterization of amine-functionalized SiO2/TiO2 films for formaldehyde degradation

This paper investigated the gaseous formaldehyde degradation by the amine-functionalized SiO₂/TiO₂ photocatalytic films for improving indoor air quality. The films were synthesized via the co-condensation reaction of methyltrimethoxysilane (MTMOS) and 3-aminopropyltrimethoxysilane (APTMS). The physicochemical properties of prepared photocatalysts were characterized with N₂ adsorption/desorption isotherms measurement, X-ray diffraction (XRD) and Fourier Transform Infrared spectroscopy (FT/IR). The effect of amine-functional groups and the ratio of MTMOS/APTMS precursors on the formaldehyde adsorption and photocatalytic degradation were investigated. The results showed that the formaldehyde adsorption and photocatalytic degradation of the APTMS-functionalized SiO₂/TiO₂ film was higher than that of SiO₂/TiO₂ film due to the surface adsorption on amine sites and the relatively high of the specific surface area of the APTMS-functionalized SiO₂/TiO₂ film (15 times higher than SiO₂/TiO₂). The enhancement of the formaldehyde degradation of the film can be attributed to the synergetic effect of adsorption and subsequent photocatalytic decomposition. The repeatability of photocatalytic film was also tested and the degradation efficiency was 91.0% of initial efficiency after seven cycles.