两亲性四硫富瓦烯衍生物的合成及其性质研究

二-(1,3-二硫环戊烯-2-硫酮-4,5-二硫)合锌酸四乙基铵盐(Zincate盐)分别与溴代十四烷和溴代十八烷在乙腈中回流,合成相应的1,3-二硫环戊烯-2-硫酮2a和2b.以亚磷酸三乙酯为偶联剂,其分别和4,5-二氰基乙硫基-1,3-二硫环戊烯-2-酮(3)发生交叉偶合反应合成四硫富瓦烯(TTF)衍生物4a和4b.在氢氧化铯的存在下,4a和4b分别与2-碘乙氧基乙醇反应生成含羟基的四硫富瓦烯(TTF)衍生物5a和5b.以三乙胺为缚酸剂,其与对甲基苯磺酰氯反应,生成含活化羟基的TTF衍生物6a和6b.在氢氧化钠的存在下,6a和6b分别与巯基噻二唑反应生成含有疏水长链烷烃和亲水醚键连接的噻二唑两亲性TTF衍生物7a～7d,并对其进行了1H NMR,13C NMR,IR,MS的表征以及初步电化学行为和Langrnuir-Blodgett膜性能研究.     

含吡啶基四硫富瓦烯衍生物的合成、 结构和电化学性质

在乙酰乙酸乙酯和氧化亚铜共同催化下, 二-(1,3-二硫环戊烯-2-硫酮-4,5-二硫)合锌酸四乙基铵盐分别与2-碘吡啶(1a)、 3-碘吡啶(1b)和4-碘吡啶(1c)反应, 制得硫酮化合物2,3-二(2-吡啶硫基)-1,3-二硫环戊烯-2-硫酮(2a)、 2,3-二(3-吡啶硫基)-1,3-二硫环戊烯-2-硫酮(2b)和2,3-二(4-吡啶硫基)-1,3-二硫环戊烯-2-硫酮(2c). 在醋酸汞催化下, 硫酮化合物2a, 2b和2c分别被氧化为2,3-二(2-吡啶硫基)-1,3-二硫环戊烯-2-酮(3a)、 2,3-二(3-吡啶硫基)-1,3-二硫环戊烯-2-酮(3b)和2,3-二(4-吡啶硫基)-1,3-二硫环戊烯-2-酮(3c). 以亚磷酸三乙酯为偶联剂, 氧酮化合物3a, 3b和3c分别发生自偶联反应生成2,3,6,7-四(2-吡啶硫基)四硫富瓦烯(4a)、 2,3,6,7-四(3-吡啶硫基)四硫富瓦烯(4b)和2,3,6,7-四(4-吡啶硫基)四硫富瓦烯(4c). 采用核磁共振波谱(NMR)、 傅里叶变换红外光谱(FTIR)和质谱(MS)分析了所合成化合物的结构和组成, 通过X射线衍射分析确认了吡啶基四硫富瓦烯衍生物4b和4c的晶体结构. 循环伏安法研究结果表明, 化合物4a, 4b和4c呈现准可逆的两电子转移过程, 结合量子化学计算, 分析了不同位置取代的吡啶基对四硫富瓦烯电化学电势的影响.     

含噻吩和吡啶基的插烯式四硫富瓦烯衍生物的合成、结构和电化学性质

在亚磷酸三乙酯催化作用下,2,3-二(2-吡啶硫基)-1,3-二硫环戊烯-2-硫酮(1)分别与2-噻吩甲醛(2a)和3-噻吩甲醛(2b)发生成烯偶联反应,生成二硫富瓦烯化合物[2-(2-噻吩)亚基-1,3-二硫环戊烯-4,5-二硫基]双邻吡啶(3a)和[2-(3-噻吩)亚基-1,3-二硫环戊烯-4,5-二硫基]双邻吡啶(3b);含噻吩和吡啶基的二硫富瓦烯化合物3a和3b分别经过单质碘诱导氧化偶联反应和硫代亚硫酸钠还原反应,得到含噻吩和吡啶基的插烯式四硫富瓦烯化合物1,2-双(4,5-二邻吡啶硫代-1,3-二硫环戊烯-2-亚基)-1,2-双(2-噻吩基)乙烷(4a)和1,2-双(4,5-二邻吡啶硫代-1,3-二硫环戊烯-2-亚基)-1,2-双(3-噻吩基)乙烷(4b).利用核磁共振波谱(NMR)、傅里叶变换红外光谱(FTIR)和质谱(MS)方法对插烯式四硫富瓦烯衍生物(4a和4b)分别进行了表征,同时采用X射线单晶衍射法分析确证了化合物3a,3b,4a和4b的晶体结构.循环伏安法研究结果表明,化合物4a和4b呈现准可逆的两电子转移行为.结合量子化学理论计算,探讨了噻吩基的位置差异对化合物4a和4b电化学电位的影响.     

新型exTTF衍生物的合成及其与四氯对苯醌的电子转移

以9,10-二蒽醌和1,3-二硫代环戊烯-2-硫酮(1和3)为原料,利用亚磷酸三乙酯为偶联剂的Wittig交叉偶合反应合成exTTF化合物9-(4,5-二氰乙基硫基-1,3-二硫代环戊烯-2-亚甲基)-10-[(4,5-亚乙基硫基)-1,3-二硫代环戊烯-2-亚甲基]-9,10-二氢蒽(4).在氢氧化铯存在下,化合物4与2-氯乙氧基乙醇反应得到exTTF化合物9-[4-氰乙基硫基-5-(2-(2-羟乙氧基)乙基硫基-1,3-二硫代环戊烯-2-亚甲基)]-10-[(4,5-亚乙基硫基)-1,3-二硫代环戊烯-2-亚甲基]-9,10-二氢蒽(5).利用Mitsunobu反应,在偶氮二甲酸二乙酯和三苯基膦催化下,化合物5与对硝基苯酚反应得到exTTF化合物9-{4-氰乙基硫基-5-[2-(2-对硝基苯氧乙氧基)乙基硫基]-1,3-二硫代环戊烯-2-亚甲基}-10-[(4,5-亚乙基硫基)-1,3-二硫代环戊烯-2-亚甲基]-9,10-二氢蒽(6).同时,X射线衍射分析了exTTF化合物4的晶体结构.循环伏安法研究表明化合物6呈现准可逆的两电子转移过程.利用紫外光谱法研究了exTTF化合物6与四氯对苯醌分子间的电子转移行为.结果表明,非氧化性金属阳离子Sc3+,Al3+和Pb2+可以有效促进电子供体6与电子接受体四氯对苯醌的分子间的电子转移行为.     

新型非对称四硫富瓦烯环状冠醚衍生物的合成及其对碱金属离子的响应性能

在Cs OH的CH3OH/DMF溶液中,4,5-二(氰乙硫基)乙二硫撑四硫富瓦烯(1a),4,5-二(氰乙硫基)甲基乙二硫撑四硫富瓦烯(1b),4,5-二(氰乙硫基)丙二硫撑四硫富瓦烯(1c)和4,5-二(氰乙硫基)苯基四硫富瓦烯(2)分别与五(乙二醇醚)二-对甲苯磺酸盐经偶联反应合成了4个新型的非对称四硫富瓦烯环状冠醚衍生物(3a~3c和4),其结构经1H NMR,~(13)C NMR,ESI-MS和元素分析表征。用循环伏安法研究了3a~3c和4对碱金属离子(Na+,Li+,K+和Rb+)的响应性能。结果表明:2,3-二硫-(3',6',9',12'-四氧冠醚)-6,7-丙二硫代四硫富瓦烯(3c)和2,3-二硫-(3',6',9',12'-四氧冠醚)-6,7-苯基四硫富瓦烯(4)对Na+响应较明显,其△E1/21分别为30 m V和45 m V。     

烷硫基四硫富瓦烯的合成及其性质的研究

分别以 1 ,3,4 ,6-四硫代戊搭烯 -2 ,5-二酮和 4 ,5-二 ( 2′-氰基乙硫基 ) -1 ,3-二硫杂环戊烯 -2 -酮为原料 ,经偶联、醇解、烃化制得四甲硫基四硫富瓦烯和四乙硫基四硫富瓦烯。对两种方法制得产物的产率存在较大差别提出了合理的解释 ,并讨论了 2种四硫富瓦烯衍生物的循环伏安图及有关电化学性质。     

5H-[1,2,4]三嗪并[5,6-b]吲哚-3-硫醇类化合物的简便合成

报道了以2-甲(乙)基苯胺1a,1b为原料经Sandmeyer反应得到7-甲(乙)基靛红2a,2b;再以环境友好的聚乙二醇-400为溶剂,N-溴代丁二酰亚胺(NBS)为绿色溴代试剂对2a,2b进行5位溴代,得到5-溴-7-甲(乙)基靛红3a,3b;2a,2b,3a,3b进一步氮烃基化得到1-烃基-7-甲(乙)基靛红4a~4j和1-烃基-5-溴-7-甲(乙)基靛红5a~5j.2a,2b,3a,3b,4a~4j,5a~5j分别与硫代氨基脲,在以二氧六环为溶剂,碳酸钾存在的条件下回流反应,简便地合成了24种5H-[1,2,4]三嗪并[5,6-b]吲哚-3-硫醇类杂环化合物6a~6x.大部分化合物未见文献报道,其结构经红外光谱、质谱、核磁氢谱(碳谱)和元素分析确认.     

烷硫基甲硫富瓦烯的合成及其性质的研究

分别以1,3,4,6－四硫代戊搭烯－2,5－二酮和4,5－二（2′-氰基乙硫基）－1,3－二硫杂环戊烯－2－酮为原料,经偶联、醇解、烃化制得四甲硫基甲硫富瓦烯和四乙硫基四硫富瓦烯。对两种方法制得产物的产率存在较大差别提出了合理的解释,并讨论了2种四硫富瓦烯衍生物的循环伏安图及有关电化学性质。     

2-甲基-3-双取代基-4,5-二氢异噁唑衍生物的合成及其拆分

3-(1′,2′-二-O-环己叉二氧乙基)异噁唑啉盐(2)与MeMgBr(或在二异丙基胺和正丁基锂存在下与乙酸乙酯)进行亲核加成反应合成了2,3-二甲基-3-(1′,2′-二-O-环己叉二氧乙基)-4,5-二氢异噁唑(3)[或2-甲基-3-(乙氧羰甲基)-3-(1′,2′-二-O-环己叉二氧乙基)-4,5-二氢异噁唑(4)]。3和4经MPLC拆分得到了非对映体3a,3b,4a和4b,其结构经1HNMR,13C-NMR,IR和元素分析表征。     

1-[3′-(4"-甲氧基苯基)-5′-甲基异噁唑-4′-甲酰基]-4-芳基氨基硫脲及其衍生物的合成

以3,5-二取代异噁唑-4-甲酰肼为基本原料制备关键中间体1-(3-对甲氧基苯基-5-甲基异噁唑-4-基)-4-芳基氨基硫脲(3a～3c);3在不同条件下经关环反应制得含有3,5-二取代异噁唑的2-芳氨基噻二唑(4a～4c),2-芳氨基噁二唑(5a～5c)和3-[3′-(4"-甲氧基苯基)-5′-甲基-异噁唑4′-基)-4-芳基-1,2,4-三唑-5-硫酮(6a～6c);6与碘甲(乙)烷反应合成了4-芳基-5-[3′-(4″-甲氧基苯基)-5′-甲基异噁唑-4′-基]-3-甲(乙)硫基-1,2,4-三唑(7a～8c),其结构经1H NMR,IR,MS和元素分析表征,其中4,5,7和8未见文献报道.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.