Polymers as Hydrophobic Adsorbent Surface for Some Surfactants

Polyvinyl alcohol (PVA) and polyacrilic acid (PAA) were used as hydrophobic adsorbent surfaces at 25°C for two nonionic surfactants, namely, tetradecyl polyoxyethylenated monolaurate [La(EO)₁₄] and tetradecyl polyoxyethylenated monooleate [Ol(EO)₁₄], and two anionic surfactants, namely, sodium oleic sulfonate [OlSO₃Na] and sodium dodecyl benzene sulfonate [SDBS]. Surface tension measurements were performed to determine the critical micelle concentration (CMC) and the adsorption isotherms of the tested surfactants. All the tested surfactants display L-shape isotherms except that of OlSO₃Na onto PVA. No adsorption behavior has been shown for the anionic SDBS onto both PVA and PAA. The adsorption data show higher adsorption affinity for all the tested nonionic surfactants onto PAA than onto PVA while the investigated anionic surfactant OlSO₃Na possesses close values of Γ_max. The study reveals that the nature of the polymer surface as adsorbent besides the molecular structure of the surfactant defined the types and mechanisms of adsorption.     

Anionic-nonionic surfactant interaction by nuclear magnetic resonance

Summary The interaction between anionic (sodium dodecyl benzene sulfonate) surfactant and nonionic (Tri and Tetra propylene glycol monomethyl ether) surfactant was studied using nuclear magnetic resonance measurement. It was observed that the addition of sodium dodecyl benzene sulfonate to the solution of nonionic surfactant (Tri and Tetra propylene glycol mono methyl ether) caused an upfield shift of the central protons of the nonionic surfactants. The aromatic protons of sodium-dodecyl benzene sulfonate undergo a very small, almost negligible, downfield shift. The changes in the chemical shift values and the integration values of the polypropylene protons and benzene protons was interpreted in terms of mixed micelle formation with the simultaneous presence of highly fluid mixed micelles of varying compositions.With 2 figures and 2 tables     

乳化工艺对微胶囊型硬脂酸相变材料热性质的影响

以硬脂酸为芯材, 碳酸钙为壁材, 采用原位聚合法制备了微胶囊型相变材料; 通过扫描电子显微镜、 红外光谱及差热-热重分析对其表面形貌和热性质进行了表征; 通过改变乳化剂的种类及用量, 研究了乳化工艺对微胶囊型相变材料表面形貌、 相变温度和包覆率的影响. 实验结果表明, 在选用的3种乳化剂十二烷基苯磺酸钠、 十六烷基三甲基溴化铵和曲拉通X-100中, 十二烷基苯磺酸钠相对效果最好, 乳化剂与芯材最佳质量比为0.5%, 相变温度为112.24 ℃时, 封装率达到92.1%.     

Evaluation of the Stability of Emulsified Ethylene-Propylene-Diene-Monomer Using Novel Technique

The good weathering resistance of ethylene-propylene-diene-monomer (EPDM) as well as its good mechanical properties makes it the preferred elastomer for different commercial applications (as binder for a variety of materials). Emulsified EPDM was prepared by direct emulsifying techniques where the solution of the rubber in hydrocarbon solvent added to different aqueous solution of emulsifiers with vigorous agitation. A larger volume of polymer was reduced into smaller subunits using the mechanical energy of comminuting techniques. After that, the hydrocarbon solvent was removed by distillation. This work studied the influence of different emulsifying systems: ionic such as (dresinate, D, sodium lauryl sulphate, SLS, and sodium dodecyl benzene sulfonate, SDBS) and nonionic such as (cetyl alcohol, CA, and triton, 15-S) on the stability of the latices. The optimum emulsifying systems were investigated by using surface tension, turbidity measurements, sedimentation rate and transmission electron microscope (TEM). It was found that the systems consist of 0.5% dresinate/0.2% cetyl alcohol and 0.5% dresinate/0.2% triton 15-S gave the good storage stability with uniformed particle size ranged between 130–180 nm. These results were confirmed by surface tension which had the lowest values while turbidity had the highest values.     

不同类型表面活性剂与高铁肌红蛋白相互作用

通过UV-Vis吸收光谱、同步荧光光谱、圆二色(CD)光谱等方法对阴离子型表面活性剂——琥珀酸二辛酯磺酸钠(AOT)和十二烷基苯磺酸钠(SDBS)、阳离子型表面活性剂——十六烷基三甲基溴化铵(CTAB)和十二烷基三甲基溴化铵(DTAB)、两性离子型表面活性剂——3-[(3-胆固醇氨丙基)二甲基氨基]-1-丙磺酸(CHAPS)与马心高铁肌红蛋白(metMb)的不同作用机理进行了探讨.结果显示:阴、阳离子型表面活性剂可以与蛋白发生较强烈的作用,且相互作用与表面活性剂的浓度密切相关.AOT和SDBS浓度的升高使得metMb的Soret带发生红移且出现两个新的Q带,伴随着配体金属电荷转移(LMCT)带的消失,蛋白从水合的六配位高自旋复合物(6-cHs)转化成六配位低自旋高铁血红素复合物(6-cLs),低浓度的AOT和SDBS对Tyr和Trp微环境均有影响,能使metMb的二级结构发生变化;而CTAB和DTAB在低浓度时对metMb的血红素中心影响不大,但是对Trp和Tyr的微环境影响很大,高浓度时主要通过静电吸引作用以聚合体形式直接作用于血红素中心,使Soret带发生蓝移,metMb形成五配位高自旋(5-cHs)复合物,血红素从疏水腔中释放出来,metMb的α螺旋含量减少.DTAB由于自身结构的特点,与CTAB作用于蛋白的过程有些区别,形成了一个中间态,但最终也导致血红素的暴露.两性离子型表面活性剂在测定浓度范围内不与metMb发生作用,原因是CHAPS整体呈电中性,其与metMb的阴离子性或者阳离子性位点作用的能力很弱,同时也说明metMb表面带相反电荷的位点相距较远.结果充分证明表面活性剂与蛋白相互作用的方式与表面活性剂的种类、结构及其浓度有关.     

阴离子相转移催化的Friedel-Crafts烷基化反应

提出三种阴离子表面活性剂十二烷基苯磺酸钠、十二烷基磺酸钠、十二烷基硫酸钠作为阴离子相转移催化剂特性。研究了它们在Friedel-Crafts反应中的催化性能,结果表明它们都有良好的催化特性合成了七个化合物, 其中五个为未见文献报导的新化合物, 它们是二苯甲基萘酚和二苯甲基酚类化合物。     

油/水界面表面活性剂的复配协同机制

采用耗散颗粒动力学(DPD)方法模拟了椰油酸二乙醇酰胺(6501)分别与十二烷基-α-烯烃磺酸钠(DAOS)、椰油酰胺丙基二甲基甜菜碱(CAB)和十二烷基苯磺酸钠(SDBS)复配体系中表面活性剂在油/水界面的排布行为, 探讨了盐度及分子结构对单一和复配表面活性剂界面活性的影响, 从界面效率、界面密度和分子排布等角度讨论了油水界面表面活性剂混合体系的复配协同增效机制.     

生物表面活性剂鼠李糖脂及其复配体系界面行为和性质的介观模拟

采用介观模拟耗散颗粒动力学（DPD）方法研究不同结构的鼠李糖脂在油/水界面行为差异和结构对活性的影响,并探讨了其与不同类型表面活性剂如十二烷基硫酸钠（SDS）、十二烷基苯磺酸钠（SDBS）、脂肪醇聚氧乙烯醚（AEO3）复配时体系的界面性质,给出不同结构的鼠李糖脂的行为特点及与常用合成表面活性剂在油/水界面的相互作用规律...     

阴离子表面活性剂存在下吖啶橙—罗丹明B混合体系能量转移研究

本文以吖啶橙和罗丹明Ｂ作为能量转移中的给予体和接受体，分别探讨了不同阴离子表面活性剂对染料问能量转移影响。从染料分子所处微环境变化的角度阐明了分子聚集状态的变化是影响能量转移效率的重要因素。     

阴离子表面活性剂与聚丙烯酰胺间的相互作用

聚集体;阴离子表面活性剂与聚丙烯酰胺间的相互作用     

1-(4-硝基苯基)-3-[4-(苯基偶氮)苯基]-三氮烯-溴化十六烷基三甲铵-阴离子表面活性剂显色反应的研究及应用

在三乙醇胺存在下,１－（４－硝基苯基）－３－［４－（苯基偶氮）苯基］－三氮烯（Ｃａｄｉｏｎ）与溴化十六烷基三甲铵（ＣＴＭＡＢ）和阴离子表面活性剂（ＡＳ）形成红色配合物,其最大吸收位于５５０ｎｍ。改变阴离子表面活性剂十二烷基苯磺酸钠、十二烷基磺酸钠、十二烷基硫酸钠时,有色配合物的表观摩尔吸光系数ε５５０分别为３．０２×１０４、２．１３×１０４、２．９４×１０４（Ｌｍｏｌ－１ｃｍ－１）,阴离子表面活性剂服从比尔定律的范围分别为０～４．１８ｍｇ／Ｌ,０～２．１８ｍｇ／Ｌ,０～３．４６ｍｇ／Ｌ。方法用于测定环境水样中阴离子表面活性剂,结果满意     

High Selective Determination of Anionic Surfactant Using Its Parallel Catalytic Hydrogen Wave

IntroductionAnionicsurfactants (AS)arewidelyusedinhouse holdorindustrialcleaners ,cosmetics ,researchlaborato ries,textiles ,pharmacies ,etc .,solargeamountofASreleasedintotheenvironmentarecausingpollution .There foreitisnecessarytodevelopafast,simpleandcosteffec tivemethodforthedeterminationofAS .Theofficialmeth odsrecommendedforthedeterminationofASarespec trophotometryandpotentialtitration .SpectrophotometricmethodanditsvariationsarebasedonthemeasurementofthecoloredassociatesofASwithposi…     

盐酸氯丙嗪作探针二级散射和倍频散射法测定环境水样中某些阴离子表面活性剂

在pH3.0~5.0的HAc-NaAc缓冲溶液中,盐酸氯丙嗪与十二烷基苯磺酸钠、十二烷基磺酸钠和十二烷基硫酸钠等阴离子表面活性剂反应形成离子缔合物时,仅能引起吸收光谱和荧光光谱的微小变化,但却能导致二级散射(SOS)和倍频散射(FDS)的显著增强。最大SOS峰均在552nm附近,最大FDS峰均在390nm附近。其中SOS法灵敏度更高,它对十二烷基苯磺酸钠、十二烷基硫酸钠和十二烷基磺酸钠的检出限分别为0.047、0.106和0.117mg/L,而其线性范围分别为0.2~12、0.4~15和0.4~20.0mg/L。研究了反应产物的吸收、荧光、SOS和FDS光谱特征、适宜的反应条件及分析化学性质,据此发展了一种用SOS技术灵敏、简便、快速测定阴离子表面活性剂的环境友好型新方法。     

表面活性剂对3-甲基吡啶电氧化制取烟酸的影响

研究了在阳极液中加入不同类型和不同浓度表面活性剂对3-甲基吡啶电氧化的影响. 结果表明, 十六烷基三甲基溴化铵、脂肪醇聚氧乙烯醚硫酸钠、十二烷基苯磺酸钠、十二烷基二甲基甜菜碱和山梨醇酐单硬脂酸酯的胶团对3-甲基吡啶电氧化有明显的促进作用. 实验结果还表明, 在低浓度的硫酸为支持电解质阳极液中加入表面活性剂与不加表面活性剂相比, 3-甲基吡啶电氧化制取烟酸的选择性和电流效率明显提高.     

Surface properties and doxorubicin delivery in mixed systems comprising a natural rosin-based ester tertiary amine and an anionic surfactant

A rosin-based ester tertiary amine salt (RETAS) cationic surfactant was obtained using natural rosin as raw material. GC-MS of RETAS was detailed analyzed. The pH-responsive mechanism of rosin-based ester tertiary amine (RETA) and RETAS was confirmed by applying theoretical calculations about electrostatic potential maps of RETA and RETAS cation using Gaussian software. Mixed system surfactants were obtained by blending RETAS cationic surfactant with sodium dodecyl benzene sulfonate (SDBS) anionic surfactant. The binary mixed surfactant systems of RETAS and SDBS had obvious synergistic effect. The γ_cmc and CMC were 39.40?mN/m and 0.56?mmol/L at the optimum molar fraction of RETAS (α)?=?0.6, respectively. The stability time of emulsion with the optimum mixed system as emulsifier increased to 309?s at α?=?0.6. The emulsifying capacity of RETAS was much better than that of RETA. RETAS had pH-responsive targeted release and the optimum mixed system showed a relatively sustained drug release by using doxorubicin (DOX) as a model drug. These results indicate that RETAS surfactant and mixed system surfactant are both promising for applications in drug delivery and emulsification.     

Adsorption Behavior and Mechanisms of Surfactants by Farmland Soils in Northeast China

The adsorption of two nonionic surfactants polyethylene glycol tert-octylphenyl ether Triton X-100 (TX-100), polyoxyethylene lauryl ether(Brij35) and an anionic surfactant sodium dodecyl benzene sulfonate(SDBS) by two soils(S1, S2) of different natures and their respective organic-matter-extracted samples(S3, S4) were investigated. These adsorption isotherms show different adsorption stages of different types of surfactants by soils. The data fitted Langmuir equation very well. The adsorption maximum capaci...     

Influence of Surfactants on the Microstructure and Performance of PDMS-E Grafted Gelatin Films

Polydimethylsiloxane grafted gelatin (PGG) polymers were prepared from mono-epoxy terminated polydimethylsiloxane (PDMS-E) macromonomer and gelatin, and surfactants were used to enhance the compatibility of the two polymers phases. The influences of surfactants, including sodium dodecyl sulfate (SDS), sodium dodecyl benzene sulfonate (SDBS), dodecyl trimethylammonium bromide (DTBA), and Tritox-100, on the microstructure and performance of polymers films were researched. XPS and FTIR results confirmed that PDMS-E was successfully grafted to gelatin chains. The results of SEM, DSC, TGA and surface contact angle indicated that microstructure of the PGG/SDS film was mainly controlled by the grafting effect on the gelatin matrix, and a tightly cross-linked network structure formed in PGG/SDBS film. However, few changes were present in the DTAB and Tri-100 systems. Surfactants played a crucial role in deciding the detailed microstructure of the grafted gelatin films, and induced the changes of hydrophobicity, flexibility and thermal properties of the polymer films.     

阴离子表面活性剂与非离子水溶性大分子二元体系的临界类胶束聚集数

将对应于γ～lgc双拐点体系第一拐点c₁的N₁定义为第一临界类胶束聚集数[N₁]₁.实验结果表明,[N₁]₁是依赖于表面活性剂结构以及大分子结构的不变量或结构本征值,不随大分子分子量和大分子浓度变化而改变.     

ADSORPTION OF SURFACE-ACTIVE AGENTS FROM AQUEOUS SOLUTION: HYDROPHOBIC SUBSTRATES∗

Isotherms for the adsorption of sodium dodecyl benzene sulfonate, sodium POE (4) nonyl phenol sulfate, and POE (25) nonyl phenol, on the hydrophobic crystalline herbicides atrazine and cyanazine were determined. Anionic surfactants were measured at 5°, 25°, and 50° C; the nonionic surfactant at 25° C only. Low degrees of surface coverage were observed; in only one case (atra-zine/NaDBS) was monolayer coverage approached. On the other hand, adsorption was accompanied by a significant increase in negative zeta potential. Although DLVO calculations suggest that this adsorption should lead to stable aggregates, these are of such size that gravitational effects overpower the DLVO terms.     

Extraction preconcentration with anionic surfactants in acidic solutions

Extraction preconcentration with anionic surfactants in acidic solutions on the basis of the cloud point was studied. Advantages and disadvantages of this method were considered. Conditions of the phase separation of some anionic surfactants (sodium decyl sulfate, sodium dodecyl sulfate, sodium dodecyl sulfonate, and sodium dodecylbenzene sulfonate) in acidic solutions were studied. With the example of pyrene and its derivatives, it was demonstrated that these surfactants can be used for extraction preconcentration. Analytical characteristics of the determination of pyrene and its derivatives in model aqueous solutions by the fluorimetric method in combination with extraction preconcentration with sodium dodecyl sulfate were obtained