Synergistic interactions between zwitterionic surfactants derived from olive oil and an anionic surfactant

Abstract

The surface properties of the mixtures of zwitterionic surfactants derived from olive oil (carboxylbetaine-OCB and sulfobetaine-OSB) and anionic surfactant-sodium dodecylbenzene sulfonate (SDBS) at different mole fractions were investigated by surface tension measurement. The influences of the addition of inorganic salts (NaCl, MgCl₂) on the surface activities in OCB/SDBS and OSB/SDBS systems were also studied. The result shows that the two mixed systems possess lower CMC values and higher surface activities over all mole fractions studied than their individual components. Meanwhile, the noticeable synergistic interactions of OCB/SDBS and OSB/SDBS were determined by the micelle interaction parameter (β^m) according to regular solution theory. It is observed that the mixed OCB/SDBS system at α_OCB?=?0.6 and the mixed OSB/SDBS system at α_OSB?=?0.6 exhibit the strongest synergism. In addition, the binary surfactant mixtures performed better surface activities upon addition of inorganic salts and the different valence state of mental ions of the inorganic salts had different surface ability effect on the mixed system: Mg²⁺?>?Na⁺.     

Synthesis,self-assembly,and pH-responsive drug release of PHMEMA-PEG-PHMEMA ABA triblock copolymers

Abstract

A series of tertiary amine containing PHMEMA-PEG-PHMEMA ABA triblock copolymers were synthesized by atom transfer radical polymerization (ATRP) using bromine-capped poly(ethylene glycol) (Br-PEG-Br) and 2-(hexamethyleneimino)ethyl methacrylate (HMEMA) as macro-initiator and monomers, respectively. The chemical structures and molecular weights of triblock copolymers were characterized by ¹H NMR and gel permeation chromatography (GPC). The self-assembly behaviors of copolymers in different pH conditions were studied by dynamic light scattering (DLS) and transmission electron microscopy (TEM). Triblock copolymers self-assembled into micelles in water (pH 7.4) and the micelles disassembled at acidic pH (pH 5.0). Anticancer drug doxorubicin (DOX) was used as a drug model and physically encapsulated into polymeric micelles. The drug release of DOX-loaded polymeric micelles was pH-responsive; the drug-loaded micelles that had higher contents of tertiary amine in polymer pendant groups showed faster release speed. In addition, the drug-loaded micelles showed excellent inhibition efficacy against HeLa cells in vitro.     

Film-forming microgels for pH-triggered capture and release

The pH-responsive behavior for a series of lightly cross-linked, sterically stabilized poly(tertiary amine methacrylate)-based latexes adsorbed onto mica and silica was investigated using in situ tapping mode AFM at room temperature. The adsorbed layer structure was primarily determined by the glass transition temperature, T(g), of the latex: poly[2-(diethylamino)ethyl methacrylate]-based particles coalesced to form relatively featureless uniform thin films, whereas the higher T(g) poly[2-(diisopropylamino)ethyl methacrylate] latexes retained their original particulate character. Adsorption was enhanced by using a cationic poly[2-(dimethylamino)ethyl methacrylate] steric stabilizer, rather than a nonionic poly(ethylene glycol)-based stabilizer, since the former led to stronger electrostatic binding to the oppositely charged substrate. Both types of adsorbed latexes acquired cationic microgel character and swelled appreciably at low pH, even those that had coalesced to form films. Fluorescence spectroscopy was used to study the capture of a model hydrophobic probe, pyrene, by these adsorbed latex layers followed by its subsequent release by lowering the solution pH. The repeated capture and release of pyrene through several pH cycles was also demonstrated. Since these poly(tertiary amine methacrylate) latexes are readily prepared by aqueous emulsion polymerization and adsorption occurs spontaneously from aqueous solution, this may constitute an attractive route for the surface modification of silica, mica and other oxides.     

A novel pH-responsive controlled release system based on mesoporous silica coated with hydroxyapatite

With well bioactive and nontoxic, hydroxyapatite (HAp) was employed to seal the nanopores of mesoporous silica (MCM-41) to realize the pH-responsive controlled release. First, MCM-41 was modified with cationic polymer, poly-(diallyldimethylammoniumchloride) (PA). And after the addition of Ca²⁺/PO₄ ^3?, HAp precipitation can take place based on the cationic sites derived from PA. It is a simple and effective way to obtain HAp coating MCM-41 system (MHAs). The structure of the system was characterized by X-ray diffraction, scanning electron microscope, transmission electron microscope, N₂ adsorption–desorption and so on. Metformin hydrochloride was used as the model drug, and the drug release performance and the release kinetics of the system were investigated in detail. Because of the degradation of HAp under acid condition, the drug loading MHAs showed a well pH-sensitive controlled release behavior. From above investigation, MHAs is a promising platform to construct a pH-responsive controlled drug delivery system, especially for some low pH tissues, such as inflammatory and tumor.     

Self-Aggregation of Cationic Dimeric and Anionic Monomeric Surfactants with Nonionic Surfactant in Aqueous Medium

Spectrofluorometric measurements have been used to elaborate the self-aggregation of mixture of anioinic, sodium dodecylbenzenesulfonate (SDBS), and cationic gemini, alkanediyl-α, ω-bis (tetradecyldimethylammonium bromide) (14-4-14) with nonionic surfactant, polyoxyethylene 10 cetyl ether (Brij-56). The critical micelle concentration (cmc) of the binary mixtures has been investigated. Application of the regular solution theory (RST) to the experimental data yield the interaction parameter at mixed micelles (β), indicate an attractive interaction and reflect the synergistic behavior in both Brij-56/SDBS and Brij-56/14-4-14 systems. The micelle aggregation number (N _agg) was measured using a steady state fluorescence quenching method. The N _agg values of the mixed surfactant system were larger than those of pure components. The micropolarity of various combinations and the binding constants (K _sv) were determined from the ratio of intensity of peaks (I ₁/I ₃) of pyrene fluorescence emission spectrum and its quenching, respectively.     

表面活性剂对驱油聚合物界面剪切流变性质的影响

利用双锥法研究了表面活性剂十二烷基苯磺酸钠(SDBS)和十六烷基三甲基溴化铵(CTAB)对油田现场用部分水解聚丙烯酰胺(PHPAM)和疏水改性聚丙烯酰胺(HMPAM)溶液的界面剪切流变性质的影响,实验结果表明:HMPAM分子通过疏水作用形成界面网络结构,界面剪切复合模量明显高于PHPAM.SDBS和CTAB通过疏水相互作用与HMPAM分子中的疏水嵌段形成聚集体,破坏界面网络结构,剪切模量随表面活性剂浓度增大明显降低.同时,界面膜从粘性膜向弹性膜转变.低SDBS浓度时,少量SDBS分子与PHPAM形成混合吸附膜,界面膜强度略有升高;SDBS浓度较高时,界面层中PHPAM分子被顶替,吸附膜强度开始减弱.阳离子表面活性剂CTAB通过静电相互作用中和PHPAM分子的负电性,造成聚合物链的部分卷曲,从而降低界面膜强度.弛豫实验结果证实了表面活性剂破坏HMPAM网络结构的机理.     

The toxicosis and detoxifcation of anionic/cationic surfactants targeted to bovine serum albumin

By using the techniques of resonance light scattering (RLS) and absorption spectra, we studied the toxicosis and detoxifcation mechanism of anionic surfactant SDBS and cationic surfactant CTMAB targeted to bovine serum albumin (BSA). Small quantity of CTMAB combines with SDBS-BSA complex to form SDBS-BSA-CTMAB complex and the IRLS of system enhanced greatly. With the cumulation of quantity, CTMAB captures SDBS from SDBS-BSA complex by electrostatic attraction and CTMAB-SDBS complex forms, meanwhile BSA automatically frees, which is corresponding to the toxicosis and detoxifcation process. Absorption experiment validates that SDBS induces the denaturalization of BSA and CTMAB facilitates the refolding of this protein.     

Silicone nanocapsules templated inside the membranes of catanionic vesicles

A simple and effective way to synthesize hollow silicone resin particles of controlled diameter is presented. The synthesis utilizes catanionic vesicles as templates for the polycondensation/polymerization processes of 1,3,5,7-tetramethylcyclotetrasiloxane (D4H) within their membranes. Two different surfactant systems were used to form the vesicular templates: mixtures of dodecyltrimethylammonium bromide (DTAB) and sodium dodecylbenzenesulfonate (SDBS) in the cationic (the DTAB/SDBS system) or anionic (the SDBS/DTAB system) rich region of the phase diagram. The templates obtained from these surfactant mixtures form spontaneously unilamellar vesicles in aqueous solution. The vesicular templates swell upon addition of D4H, thus increasing their size. The silicone resin was obtained in acid- or base-catalyzed polycondensation and ring-opening polymerization processes of D4H. In the case of the DTAB/SDBS system the formation of a densely cross-linked silicone material with SiO3/2 units allowed the nanocapsules to retain the vesicular shape after removal of the template, whereas in the SDBS/DTAB system, the polymer produces capsules which are too smooth to support surfactant lysis. The morphology of the silicone nanocapsules was analyzed using transmission electron microscopy (TEM) and, in some cases, atomic force microscopy (AFM). TEM and AFM reveal discrete hollow particles with a small amount of linked or aggregated hollow silica shells.     

Dendrimer-like supramolecular nanovalves based on polypseudorotaxane and mesoporous silica-coated magnetic graphene oxide: a potential pH-sensitive anticancer drug carrier

In the present research, two types of drug carriers based on mesoporous silica-coated magnetic graphene oxide, Fe₃O₄@GO@mSiO₂, were synthesised and the pH-responsive behaviour for doxorubicin release was investigated. One type of the carrier was dendrimer-like multi ethylene amine grafted on Fe₃O₄@GO@mSiO₂ and the other was dendrimer-like supramolecular polypseudorotaxane. Herein, α-cyclodextrin was used in the structure of supramolecular nanoparticles as a gatekeeper to inhibit the drug from escaping at neutral pH (the pH of healthy tissue). The drug release profile showed that the supramolecular nanocarrier was more sensitive to the pH changes. The content of drug release was about 100% at pH 5.5 (endosomal pH) during 48 h; but it was zero at pH 7.4. Also, the dendrimer structure facilitated the triggered release of doxorubicin.     

Binary Coalescence of Water Drops in Organic Media in Presence of Ionic Surfactants and Salts

Binary coalescence of water drops in o‐xylene and toluene, and ethylene glycol drops in toluene were studied in this work. The effects of cationic and anionic surfactants on coalescence time were studied. Cetyl trimethyl ammonium bromide (CTAB) and cetyl pyridinium bromide (CPyBr) were used as cationic surfactants. Sodium dodecyl benzene sulfonate (SDBS) was used as the anionic surfactant. The effects of salts (NaCl and CaCl₂) containing monovalent and divalent ions on coalescence were investigated. The coalescence time was found to follow distributions in each of these experiments. The minimum and maximum values of the distributions were largely different. The stochastic model developed earlier by us was used to fit the distributions. The effects of the physical properties of the system (such as density, size of the drops, interfacial tension, and surface excess of adsorbed surfactant) on the model parameters were discussed.     

pH and thermo responsive aliphatic tertiary amine chromophore hyperbranched poly(amino ether ester)s from oxa-Michael addition polymerization

In this research, we developed a novel and facile strategy to prepare aliphatic tertiary amine chromophore hyperbranched poly(amino ether ester)s with pH and thermo responsiveness via phosphazene base (t-BuP₂) catalyzed oxa-Michael addition polymerization of triethanolamine with ethylene glycol diacrylate at room temperature. UV–vis and fluorescence analyses results showed that the tertiary amine at branching point for hyperbranched poly(amino ether ester)s is very important to retain strong blue fluorescence of tertiary amine chromophore. Moreover, the hyperbranched poly(amino ether ester)s exhibit an aggregation caused quenching (ACQ) fluorescence, solvent induced red-shifted emission, molecular weight, and temperature dependent emission characters. More interestingly, the hyperbranched poly(amino ether ester)s show extreme acid induced quenching fluorescence phenomenon, and also display good water solubility, specific recognition of Fe³⁺ ion, low cytotoxicity, and bright cell imaging, which could serve as a microenvironment-responding fluorescent probe for application in chemical sensing, cell imaging, drug delivery, or disease diagnostics. This research provides a versatile method for the preparation of stimuli-responsive aliphatic tertiary amine chromophore polymers, and supplies ideas for researchers to explore other unconventional fluorescent polymers for application.     

Polychlorinated Biphenyls-contaminated Soil Washing with Mixed Surfactants Enhanced by Electrokinetics

On the basis of comparing the adsorption loss of different surfactants[single nonionic surfactant sorbitanmonooleatepolyoxyethylene ether(Tween 80), anionic surfactant sodium dodecyl benzene sulfonate(SDBS), and mixed surfactants Tween 80/SDBS(3:2), Tween 80/SDBS(4:1)] and their performance in the enhancement of polychlorinated biphenyls(PCBs) desorption from soil, the impact of electric field intensity on the desorption of PCBs and the transport of surfactants in washing resulted solution were investigated in this study. With regard to the remediation cost, 1000 mg/L mixed Tween 80/SDBS(3:2) was recognized as an optimum concentration in the remediation of PCBs-contaminated soil, because Tween 80/SDBS(3:2) had the highest washing capacity and relatively low adsorption loss onto soil. Electrokinetics can enhance the washing efficiency of PCBs-contaminated soil by Tween 80/SDBS(3:2) effectively and safely at an electric field intensity of 1.5 V/cm for 10 d, for the desorption of PCBs was 1.57 times more than that without electrokinetics, and the most of organic residue in washing resulted solution was removed in an electrical field to avoid the possible secondary contamination risk.     

Test of Hofmeister-like series of anionic headgroups: clouding and micellar growth

Phenomenon of clouding in charged micellar solutions is a fairly recent addition to conventional phenomenon shown by aqueous nonionic micelles. In this paper, we have tested a Hofmeister-like ordering of charged headgroups in the context of cloud point (CP) and micellar growth. For this purpose, we have used various combinations of surfactant (sodium dodecyl sulfate, SDS; sodium dodecylbenzene sulfonate, SDBS; sodium salts of α-sulfonato myristic acid methyl ester, MES; and α-sulfonato palmitic acid methyl ester, PES) and tetra-n-butylammonium bromide (TBAB). Different surfactant concentrations and TBAB concentrations are used and CP measurements have been performed. CP values were found in the order SDBS?<?SDS?<?PES?<?MES for the same concentration of surfactant and TBAB. This order has been discussed in the light of water affinities of interacting ionic species (i.e., surfactant headgroup and TBA⁺ counterion). The ordering was found similar for the case of micellar growth studied by dynamic light scattering (DLS). A bimodal distribution of aggregate size was found that transforms to giant aggregates at CP. The micelles of roughly 10-nm size convert to aggregates of 1 μm. The study has a few novelties: (1) headgroup dependence of CP, (2) micellar growth on heating, and (3) confirmation of Hofmeister-like series of headgroup.     

A spectrophotometric flow procedure for the determination of cationic surfactants in natural waters using a solenoid micro-pump for fluid propulsion

An automatic flow-analysis procedure for spectrophotometric determination of cationic surfactants in surface water using a solenoid micro-pump for propelling solutions of reagents and sample is described. The proposed method is based on a ternary formation complex between chromazurol S, the Fe(III) ion, and the cationic surfactant. The flow network comprised four solenoid micro-pumps controlled by a microcomputer, which performed the sampling step by loading a reaction coil with sample and reagent solutions and displacing the sample zone through the analytical path. The system is simple, easy to operate, and very flexible, with sufficient sensitivity to determine cationic surfactants in water without any pre-concentration or separation step. After determining the best operational conditions, favourable features such as a linear response between 0.34 and 10.2?mg?L^?1 of surfactant (R?=?0.999), a relative standard deviation of 0.6% (n?=?11) for a sample containing 3.4?mg?L^?1 of surfactant, a detection limit of 0.035?mg?L^?1 of surfactant, and a sampling throughput of 72 determinations per hour were achieved. The system was used to determine cationic surfactant in river-water samples, and recovery values between 91 and 106% were achieved.     

Photochemical control of molecular assembly formation in a catanionic surfactant system

Photochemical control of vesicle disintegration and reformation in aqueous solution was examined using a mixture of 4-butylazobenzene-4'-(oxyethyl)trimethylammonium bromide (AZTMA) as the photoresponsive cationic surfactant and sodium dodecylbenzenesulfonate (SDBS) as the anionic surfactant. Spontaneous vesicle formation was found in a wide-ranging composition of the trans-AZTMA/SDBS system. AZTMA molecules constituting vesicles underwent reversible trans-cis photoisomerization when irradiated with ultraviolet and visible light. Transmission electron microscopy observations using the freeze-fracture technique (FF-TEM) showed that UV light irradiation caused the vesicles to disintegrate into coarse aggregates and visible light irradiation stimulated the reformation of vesicles (normal control). A detailed investigation of the phase state and the effects of UV and visible light irradiation on the AZTMA/SDBS system with the use of electroconductivity, dynamic/static light scattering, and surface tension measurements and FF-TEM observations revealed that in the AZTMA-rich composition (AZTMA/SDBS 9:1) a micellar solution before light irradiation became a vesicular solution after UV light irradiation and visible light irradiation allowed the return to a micellar solution (reverse control). Thus, we could photochemically control the disintegration (normal control) and reformation (reverse control) of vesicles in the same system.     

Uptake and release of anionic surfactant into and from cationic core-shell microgel particles

Core-shell microgel particles, in the colloidal size range, have been prepared and characterized, where the core and the shell are both copolymers, based on N-isopropylacrylamide, but where the core and shell contain different pH-responsive groups having widely separated acid dissociation constants (pKa). The core contains vinylpyridine (VP), which has a pKa value of 4.92, and the shell contains 2-(dimethylamino)ethyl methacrylate (DMAEM), which has a pKa value of 8.4. The dispersion properties, and the uptake and release of an anionic surfactant, sodium dodecylbenzenesulfonate (SDBS), have been studied for both the core and the core-shell microgel particles as a function of pH changes. Both the core and the core-shell particles have been shown to swell as the pH decreases over the range from 7 to 3. However, despite the large differences in the pKa values of the VP and DMEAM groups, no distinct steps in the swelling ratio-pH curve for the core-shell particles were observed, and it is postulated that the boundary between the core and shell regions may be somewhat extended, rather than sharp. The uptake of the anionic surfactant SDBS has been shown to depend on two distinct attractive interactions between the surfactant molecules and the microgel particles: electrostatic and hydrophobic. A reasonable correlation between the minimum in the particle diameter, for both the core and the core-shell particles, and the point of charge neutralization, in the presence of SDBS, has been established.     

新型季铵型阳离子表面活性剂的合成及性能

以环氧大豆油为基本原料合成了一种季铵型阳离子表面活性剂,通过红外光谱和核磁共振氢谱对其结构进行了表征,并对其表面张力和临界胶束浓度进行了测定.     

pH响应型纳米药物载体的释药机制及性能研究进展

pH响应型纳米载体因具有智能的酸敏或碱敏释药性能,已成为当前一类重要的多功能纳米载体,并得到了研究人员的广泛关注。特别是酸敏性纳米载体,可用于肿瘤弱酸微环境的药物控释,因而对药物的定点释放和癌症的靶向治疗等生物医学应用发挥了积极作用。本文综述了近年来各类pH响应型纳米载体的典型合成方法,系统地介绍了共价键、分子间作用力以及物理结构变化3种方式引发的pH响应释药机制。深入阐述了pH响应型纳米载体的载药性能、体外释药性能、体外细胞毒性、体内抗癌性能及体内分布性能,并详细列举了近年来pH响应型纳米载体的各类实验参数,进而为pH响应型纳米载体的深入研究提供了方法学的借鉴和性能参考。     

Liquid crystal-forming aqueous hydroxypropyl cellulose solutions: Effects of surfactants on the turbidity and shear viscosity

The effects of type and concentration of surfactant on the turbidity and viscometric behavior for dilute and concentrated aqueous hydroxypropyl cellulose (HPC) solutions were examined. Two anionic surfactants, sodium dodecyl benzene sulfonate (SDBS) and sodium dodecyl sulfate (SDS), caused the cloud point of the dilute system to increase, but a nonionic and two cationic surfactants did not do so markedly. The transmittance for the dilute system increased with surfactant. The transmittance and viscometric behavior for the concentrated system were strongly dependent on the phase of the system: In the single-phase (isotropic and anisotropic), the transmittance and viscosity increased with SDBS, but, in the biphasic region, the behaviors were not as simple. An attempt was made to explain the transmittance and viscometric behavior in the single-phase on the basis of the change in apparent molecular weight and in order of HPC molecules. The phase transformation appeared to become less sensitive to temperature with SDBS. © 1993 John Wiley & Sons, Inc.     

阴/阳离子表面活性剂复配体系的中相微乳液研究

阴离子表面活性剂双-2-乙基己基磺化琥珀酸钠(简称AOT), 和阳离子表面活性剂十六烷基三甲基溴代铵(简称CTAB), 在有醇、正辛烷、盐水存在的情况下,能形成多相微乳液。本文系统地研究了阴/阳离子表面活性剂配比、醇的种类、醇的浓度对该体系的中相微乳液的形成及特性的影响, 得到了中相微乳液的特性参数(最佳含盐量S^*, 最佳中相微乳液体积V^*, 界面张力r~E、盐宽△S等)。这些性质对与阴/阳离子表面活性剂复配体系, 三次采油及日用化工上的应用开发具有重要意义。最后还开展单独阴离子表面活性剂体系和阴/阳离子表面活性剂复配体系进行了比较, 得到一些有价值规律, 并从理论上进行了探讨。