广州秋季灰霾和正常天气PM2.5中水溶性离子特征

为了探讨细粒子(PM2.5)在灰霾天气下水溶性离子的组分特征,2007年秋季在广州万顷沙连续一个月采集了大气PM2.5样品,分析了SO42-,NO3-,NH4+,Cl-,Na+,K+,Ca2+,C2O42-,F-,NO2-和HCOO-11种水溶性离子含量.结果显示,正常天气和灰霾天气PM2.5总水性离子质量浓度分别为3...     

2,4-二硝基苯肼衍生-高效液相色谱测定大气细粒子中二羰基类化合物

以2,4-二硝基苯肼作为衍生化试剂,采用高效液相色谱法定量检测了大气细粒子(PM2.5)中二羰基类化合物。以乙二醛和甲基乙二醛为目标化合物,对二羰基类化合物采样条件(采集时间,流速等)、样品处理及分析条件进行了优化。研究表明,利用3mL衍生化溶液(含0.25mmol/LHCl和30μL饱和DNPH-乙腈溶液)和3mL乙腈可有效提取滤膜上的二羰基类化合物;本方法在滤膜采样12h内的采样及洗脱效果较好。利用此方法对上海市宝山区上海大学和崇明东平国家森林公园大气细粒子(PM2.5)中二羰基化合物进行了检测。     

复杂样品的固相微萃取-直接质谱分析技术研究进展

常压离子化质谱分析技术由于具有无需样品预处理、操作简单、分析效率高等特点,现已在复杂样品的快速分析方面发挥了重要作用。但是,该技术在质谱分析时将样品基质和待测化合物同时进行电离,样品基质对目标化合物的质谱分析造成了严重干扰。为了解决这一问题,在质谱直接分析前先采用固相微萃取技术对复杂样品中的目标化合物进行富集或基质去除,可极大地提高待测化合物的质谱分析灵敏度。该文着重综述了近几年发展起来可直接与常压电离源相联用或可原位电离目标化合物的固相微萃取技术,介绍了它们的原理及在复杂样品分析领域的应用,展望了固相微萃取-直接质谱分析技术的发展趋势。     

La-Ca-Ni-O体系900 ℃下的相关系

系统研究了空气氛中900℃下La-Ca-Ni-O准三元氧化物体系的相关系，给出了该温度截面上整个体系的相区分布。该体系中存在La2-xCaxNiO4(0≤x≤0．37)固溶区，固溶区内所有的样品均为四方晶胞，晶胞体积和相应的晶胞参数都随样品中Ca含量的增加而连续减小。在该温度截面上没有其他新物相生成，对以往文献报道的“La2CaOx”结构和组成进行了表征，证明该化合物并非是La-Ca-O二元体系中的化合物，而很可能是相应的碱式碳酸盐。     

N-芳磺酰基硝基苯乙酰胺的设计、合成及抑制大豆种子萌发活性的研究

为发现新型的、高活性的脱落酸功能类似物，本文以硝基苯磺酰胺化合物（PM4）为先导，通过活性亚结构拼接原理设计、合成了19个N-芳磺酰基硝基苯乙酰胺（3a~3s）。所有化合物都经过核磁共振和高分辨质谱（ESI）的确证。种子发芽试验表明：浓度为25 μmol/L时，3i、 3k、 3l和3n 4个化合物的抑芽活性与先导PM4相当，并且发现目标化合物中R为3-取代时，其抑制活性高于2-取代和4-取代。此外，分子对接试验结果表明：3l与受体之间的相互作用强于3p。本研究为发现新型功能类似物提供了重要的借鉴价值。     

固相萃取-高效液相色谱-质谱联用法同时测定食品中9种人工合成甜味剂

建立了固相萃取-高效液相色谱-串联质谱快速检测食品中安赛蜜、糖精钠、甜蜜素、三氯蔗糖、阿斯巴甜、阿力甜、纽甜、甘素及新橙皮甙二氢查尔酮等9种人工合成甜味剂的方法。样品中的甜味剂经三乙胺缓冲溶液（pH 4.5）提取，采用亲水亲脂平衡填料固相萃取柱净化，经Phenomenex Knietex^® F5色谱柱（100 mm×2.1 mm，2.6 μm）分离，以0.1%（v/v）甲酸-5 mmol/L甲酸铵溶液和甲醇为流动相，进行梯度洗脱，以电喷雾离子源正负离子切换多反应监测（MRM）模式进行质谱检测。采用内标法定量，进一步降低样品基质效应的影响。结果表明：本方法在去除样品基质干扰方面取得良好效果，9种甜味剂的检出限和定量限分别在2~30 μg/L和6~100 μg/L之间，在各自的线性范围内线性关系良好（相关系数r²>0.999）。9种甜味剂空白样品在3个水平下的加标回收率在86.3%~106.3%之间，相对标准偏差（RSD）在1.2%~5.9%之间。本方法快捷、高效、准确可靠，可用于复杂食品基质中9种人工合成甜味剂的快速检测。     

阴离子交换色谱-积分脉冲安培法测定人体尿液中的异黄蝶呤

蝶呤类化合物是细胞代谢过程中的重要辅助因素,可以作为多种疾病早期诊断的标志物.其中,新蝶呤的研究较为深入,临床上已经作为肿瘤标志物用于肺癌~([1])等癌症的诊断,而其它蝶呤类化合物的研究和应用相对较少.目前,蝶呤类化合物的检测主要采用高效液相色谱法~([2]).近年来,高效阴离子交换色谱-积分脉冲安培法(HPAEC-IPAD)已成为测定糖类化合物和氨基酸的较好的分析方法,已经应用于液体调味品~([3])等样品的分析测定.本研究建立了高效阴离子交换色谱-积分脉冲安培法测定人体尿液中异黄蝶呤的分析方法,并将固相萃取技术应用于样品前处理,成功地将大量干扰物质去除.     

在线固相萃取-超高效液相色谱-串联质谱法测定乳制品中双酚A等4种内分泌干扰物

建立了乳制品中三氯生、三氯卡班、双酚A和壬基酚4种内分泌干扰物的在线固相萃取超高压液相色谱-串联质谱(On-line SPE LC-MS/MS)检测方法。液态乳制品或奶粉样品中加入乙酸缓冲液,目标物经β-葡糖醛酸苷肽酶/芳基磺酸酯酶酶解后,用乙腈提取,冷冻离心10 min后,取上清液,用水稀释,在线固相萃取串联质谱法测定。样品溶液经Xbridge C8柱富集,BEH C18色谱柱分离,甲醇和水梯度洗脱,三重四极杆质谱电喷雾负离子模式下采集数据,同位素内标法定量。4种目标化合物的线性范围为0.005~5.0μg/L,相关系数R2>0.99;方法的定量限为0.03~1.0μg/kg,3个添加水平的平均加标回收率为80.2％~106.7％, RSD<15％。本方法快速、简单、灵敏度高,适用于乳制品中4种内分泌干扰物的同时检测。应用本方法对原料乳和北京市售液奶样品进行了分析,结果表明,壬基酚的检出率最高。     

通过式固相萃取-液相色谱-四极杆/静电场轨道阱高分辨质谱快速筛查鱼肉中全氟化合物及其前体物质

采用通过式固相萃取技术去除样品基质中脂肪和磷脂等杂质干扰,利用液相色谱-四极杆/静电场轨道阱高分辨质谱( LC-Q Exactuve Orbutrap MS)的同时定性定量功能,建立了鱼肉中18种全氟化合物( Perfluoru-nated compounds, PFCs)及其21种前体物质的同时分析方法。样品经90%乙腈溶液提取,Oasus PRuME HLB通过式固相萃取柱净化,C18色谱柱分离,同时在液相色谱系统混合器和进样器之间串联一根延迟色谱柱,去除液相色谱系统的背景干扰;质谱数据采集使用Q Exactuve高分辨质谱的Full MS/dd-MS2监测模式,以Full MS一级质谱全扫描提取母离子精确质量数所得的色谱峰面积进行定量,以保留时间和dd-MS2数据依赖子离子扫描所得的二级子离子质谱图进行定性确证。39种目标物的精确质量数偏差不大于3×10-6,浓度与母离子峰面积的线性关系良好,相关系数≥0.99,检出限为0.02~0.50μg/kg。基质加标回收率在61.7%~122%之间,相对标准偏差(RSD)为6.9%~18.8%。本方法实现了18种PFCs及其21种前体物质的同时确证和测定,拓展了生物基质中全氟化合物的检测种类,而且前处理方法更为简化、部分化合物的灵敏度比文献报道方法提高约一个数量级,为全氟化合物前体物质的生物转化研究提供了高效的技术基础。     

复合掺杂氧化物La0.5Sr0.5CoO2.91的性能和稳定性

采用固相反应法和柠檬酸-硝酸盐溶胶-凝胶低温自蔓延燃烧法（简称柠檬酸法）合成了La0.5Sr0.5CoO2．91（LSC）复合氧化物。借助XRD和SEM对不同制备方法合成粉体的晶体结构和晶粒形貌进行了研究。结果表明：固相反应法可制得均一钙钛矿结构的LSC氧化物，柠檬酸法除制得LSC氧化物外，还有LaSrCoO4相的生成。柠檬酸-硝酸盐溶胶-凝胶低温自蔓延燃烧法合成粉体的粒度相对较小。为研究以Ce0．9Gd0.1O1．95（GDC）为电解质的固体氧化物燃料电池阴极材料的性能，将LSC粉体与GDC粉体按6：4（质量比）制备了固体氧化物燃料电池（SOFC）的阴极片。在空气气氛下使用直流四探针法研究了烧结样品300～800℃的电导率，发现由柠檬酸法得到粉体制备的阴极片的电导率值较高。将制备的样品置于马弗炉中800℃条件下烧结800h，比较失效前后电导率的变化情况，并借助XRD，SEM等测试手段分析样品电导率变化的原因。分析发现，失效后两种样品的电导率值都有所降低，且样品中都有新相生成，晶体形貌有较大的变化。     

Experimental choices for the determination of carbonyl compounds in air

The analysis of carbonyls in ambient air has received a great deal of scientific attention with the advancement of analytical techniques and increased demand for the build-up of its data base. In this review article, we have attempted to provide some insight into the relative performance of different instrumental approaches available for the analysis of ambient carbonyls with a major emphasis on high performance liquid chromatographic and gas chromatographic methods. Reported in several international standard procedures, derivatization of carbonyls with 2,4-dinitrophenylhydrazine (2,4-DNPH) with either an impinger or cartridges is the most commonly used method of HPLC detection. In this respect, a number of alternative hydrazine reagents have also been discussed for use with HPLC. In contrast, GC methods based on the combined application of adsorptive enrichment on solid sorbents and thermal desorption are examined with regard to their suitability for carbonyl analysis in air. Particular emphasis has been directed towards the advantages and drawbacks of these different instrumental techniques for ambient carbonyls. Based on this comparative approach, we discuss the suitability for each method for carbonyl analysis.     

An optimized method for the determination of volatile and semi-volatile aldehydes and ketones in ambient particulate matter

A method has been developed to measure aldehydes and ketones associated with atmospheric particles. Carbonyl compounds from particulate material collected on Teflon-coated glass-fiber filters were simultaneously extracted and derivatized with an appropriate 2,4-dinitrophenylhydrazine (2,4-DNPH) solution. The efficiency of this procedure utilizing various 2,4-DNPH concentrations and solvent compositions was studied for 13 carbonyl compounds of atmospheric importance. These include formaldehyde, acetaldehyde, acetone, dicarbonyls such as glyoxal and methylglyoxal, and biogenic carbonyls such as pinonaldehyde and nopinone. An extraction solution containing 3 × 10^?2 M 2,4-DNPH, in 60% acetonitrile/40% water, and pH 3 was most efficient in extracting and derivatizing these aldehydes and ketones (83-100% recovery). Improved sample enrichment and 2,4-DNPH purification methods were developed that afforded detection limits of 0.009-5.6 ng m^?3. The relative standard deviation for replicate analyses were 1.9-10.1%. Carbonyl compounds in ambient particulate samples were quantified during a recent field study. Median values for nine carbonyl species ranged from 0.01-33.9 ng m^?3 during the study.     

改进的固相萃取-高效液相色谱法测定土壤中15种醛酮类化合物北大核心CSCD

建立了改进的固相萃取-高效液相色谱法测定土壤中甲醛、乙醛、丙烯醛、丙酮、丙醛、丁烯醛、丁醛、苯甲醛、异戊醛、正戊醛、邻-甲基苯甲醛、间-甲基苯甲醛、对-甲基苯甲醛、正己醛和2,5-二甲基苯甲醛等15种醛酮类化合物的分析方法。利用乙腈对土壤进行超声提取,样品提取液与2,4-二硝基苯肼(2,4-DNPH)进行衍生化反应,生成稳定的腙类化合物;随后利用装有亲水亲脂平衡的N-乙烯基吡咯烷酮/二乙烯基苯共聚物填料的固相萃取小柱(Welchrom^(■)BRP)对衍生后的溶液进行净化;采用Ultimate^(■)XB-C_(18)色谱柱(250 mm×4.6 mm,5μm)进行分离,以乙腈-水(65∶35,v/v)为流动相进行等度洗脱,于波长360 nm处进行检测,利用外标法对土壤中15种醛酮类化合物进行定量。该方法改进了环境标准HJ 997-2018《土壤和沉积物醛、酮类化合物的测定高效液相色谱法》中试样的处理方法,优化后得到土壤的最佳提取条件,即:提取溶剂为乙腈,提取温度为30℃,提取时间为10 min。结果表明:采用BRP小柱的净化效果明显优于普通硅胶基质C_(18)小柱,15种醛酮类化合物在各自的范围内线性关系良好,线性相关系数均在0.996以上;平均加标回收率为84.6%~115.9%,相对标准偏差(RSD)为0.2%~5.1%;检出限为0.02~0.06 mg/L。该方法简便,灵敏度高,准确性好,适用于HJ 997-2018中规定的土壤和沉积物中15种醛酮类化合物的准确定量分析,为研究土壤中醛酮类化合物的残留状况和环境行为提供了可靠的技术支持。     

Influences of sampling volume and sample concentration on the analysis of atmospheric carbonyls by 2,4-dinitrophenylhydrazine cartridge

In this study, the analytical bias involved in the application of the 2,4-dinitrophenylhydrazine (2,4-DNPH)-coated cartridge sampling method was investigated for the analysis of five atmospheric carbonyl species (i.e., acetaldehyde, propionaldehyde, butyraldehyde, isovaleraldehyde, and valeraldehyde). In order to evaluate the potential bias of the sampling technique, a series of the laboratory experiments were conducted to cover a wide range of volumes (1–20 L) and concentration levels (approximately 100–2000 ppb in case of acetaldehyde). The results of these experiments were then evaluated in terms of the recovery rate (RR) for each carbonyl species. The detection properties of these carbonyls were clearly distinguished between light and heavy species in terms of RR and its relative standard error (R.S.E.). It also indicates that the studied analytical approach can yield the most reliable pattern for light carbonyls, especially acetaldehyde. When these experimental results were tested further by a two-factor analysis of variance (ANOVA), the analysis based on the cartridge sampling method is affected more sensitively by the concentration levels of samples rather than the sampling volume.     

A New HPLC Method to Determine Carbonyl Compounds in Air

In this paper,a new HPLC method was established to determine the earbonyl compounds in air.As the absorbent,2,4-dinitrophenylhydrazint(2,4-DNPH)reaeted with earbonyls specifieally,which form the corresponding 2,4-dinitrophenylhydrazones,then analyzed by HPLC.The chromatographic conditions,the recovery rate,stability of samples,reagent blank,sampling efficiency were all studied systematically.The results showed that this established method had high sensitivity and good selectivity compared with other analytical methods,and it can detemine ten earbonyl compounds in air in 26 min simultancously.     

Determination of gaseous carbonyl compounds by their pentafluorophenyl hydrazones with gas chromatography/mass spectrometry

A sensitive and reliable method has been developed for the simultaneous determination of 20 airborne carbonyl compounds in the C₁-C₁₀ range. The carbonyls were collected onto solid sorbent coated with pentafluorophenyl hydrazine (PFPH), followed by solvent extraction and gas chromatographic (GC)/mass spectrometric (MS) analysis of the PFPH derivatives. The sorbent is packed into two separate sections in a glass sampling tube. The two-section design allows convenient checking of collection efficiency and breakthrough. The sampling tube, with a coating amount of 971 nmol PFPH per 100 mg Tenax TA and operated at a sampling flow rate of 80 mL min⁻¹, collects the 20 carbonyls with efficiencies above 95%. Hexane extracts the collected carbonyls in their PFPH derivatives in the sampling tube with better than 95% extraction efficiency. It is necessary to let the sampling tube sit at ambient temperature for 3 days before solvent extraction to ensure complete derivatization of the carbonyls. The limits of detection (LODs) of the tested carbonyls are in the range of 3.7-11.6 ng per sample. The method has been field-tested both in ambient environment and in an indoor environment from burning mosquito-repellent incense. Eighteen carbonyls were detected in the ambient air samples with the exception of o-tolualdehyde and m-tolualdehyde, while all the 20 target carbonyls were found in the incense smoke. Compare field test with classical DNPH-HPLC/UV method, good agreement exited between the two methods for lower molecular carbonyls but PFPH method is found to be a better analytical method for determination of high molecular weight carbonyls.     

GC/ITMS measurement of carbonyls and multifunctional carbonyls in PM2.5 particles emitted from motor vehicles.

A method was developed and tested to identify and quantitate carbonyls and multifunctional carbonyls in fine particulate matter (PM2.5; <2.5 microm aerodynamic diameter). The method relies on ultrasonic extraction of particulate matter on filters at -8 degrees C; derivatization with O-(2,3,4,5,6-pentafluorobenzyl) hydroxylamine (PFBHA), and PFBHA along with bis (trimethylsilyl) trifluoroacetamide (BSTFA); and detection of the derivatives by gas chromatography/ion trap mass spectrometry. Ultrasonic extraction of model compounds from enriched particles was affected by solvent polarity (water > methylene chloride > toluene-isopropanol (2 + 1, v/v). Water provided the highest recovery for dihydroxy acetone, pyruvic acid, and hydroxy acetone, compared to methylene chloride, and toluene-isopropanol. Lowering the ultrasonication bath temperature from 0 degrees to -8 degrees C improved the recoveries of the less water soluble and more volatile species-methacrolein, methyl vinyl ketone, 2,3-butanedione, and tolualdehyde. The power of the method was demonstrated by identification and quantitation of carbonyls and multifunctional carbonyls in sample extracts of fine particulate matter (PM2.5) collected in the Caldecott tunnel, CA. The identities of crotonaldehyde, 2,3-butanedione, glyoxal, 9H-fluoren-9-one, glycolaldehyde, glyoxylic acid, levulinic acid, and 3-hydroxybenzaldehyde were confirmed by comparing the relative retention time and mass spectra of the analyte in the sample extract with an authentic standard. Quantitation of crotonaldehyde, glyoxal, 2,3-butanedione, glyoxylic acid, and levulinic acid was accomplished. This is the first report of glyoxylic acid, levulinic acid, and 3-hydroxybenzaldheyde in PM2.5 particles sampled in a roadway tunnel. It is also the first report of a C10 carbonyl with the molecular formula of C10H16O2, a hydroxy carbonyl with the molecular formula of C17H21NO2, and a hydroxy or dihydroxy carbonyl with the molecular formula of C16H14O2 or C9H10O3. The high-molecular weight hydroxy carbonyls, which were found only in the heavy-duty (diesel) bore, may be tracers of diesel emissions in air.     

Development of a broad selective molecularly imprinted polymers-based solid phase extraction of contraceptive drug levonorgestrel from water samples

A broad selective molecularly imprinted polymers-based solid phase extraction (MISPE) for levonorgestrel (LNG) from water samples was developed. Using LNG as a template molecule, acrylamide (AA) as functional monomer, ethylene glycol dimethacrylate (EGDMA) as linking agent and bulk polymerisation as a synthetic method, the molecularly imprinted polymers (MIPs) were synthesised and characterised. The MIPs displayed a high specific rebinding for LNG with the imprinting factor of 3.71. The Scatchard analysis showed that there was at least one class of binding site for LNG formed in the MIPs with the dissociation constant of 8.046?µg?mL^?1. The results of selectivity testing indicated that the MIPs also exhibited high cross-reactivity with structurally related compounds (estrone, methylprednisolone and ethinyl estradiol), but no recognition with non-structurally related compound (indomethacin), suggesting that the MIPs could be used as a broad recognition absorbent. MISPE column was prepared by packing MIPs particles into a common SPE cartridge. The MISPE extraction conditions including loading, washing and eluting solutions were carefully optimised. Water samples spiked with LNG were extracted by MISPE column and detected by high-performance liquid chromatography. The recoveries were found to be 79.97?～?132.79% with relative standard deviations (RSD) of 1.92?～?10.43%, indicating the feasibility of the prepared MIPs for LNG extraction.     

Evaluation of silica gel cartridges coated in situ with acidified 2,4-dinitrophenylhydrazine for sampling aldehydes and ketones in air

A procedure for coating in situ silica gel in prepacked cartridges with 2,4-dinitrophenylhydrazine (DNPH) acidified with hydrochloric acid is described. The coated cartridge was compared with a validated DNPH impinger method for sampling organic carbonyl compounds (aldehydes and ketones) in diluted automotive exhaust emissions and in ambient air for subsequent analysis of the DNPH derivatives by high performance liquid chromatography. Qualitative and quantitative data are presented that show that the two sampling devices are equivalent. The coated cartridge is ideal for long-term sampling of carbonyls at sub to low parts-per-billion level in ambient air or for short-term sampling of carbonyls at low ppb to parts-per-million level in diluted automotive exhaust emissions. An unknown degradation product of acrolein has been tentatively identified as x-acrolein. The disappearance of acrolein in the analytical sample matrix correlates quantitatively almost on a mole for mole basis with the growth of x-acrolein. The sum of the concentration of acrolein and x-acrolein appears to be invariant with time.     

分子印迹固相萃取-超高效液相色谱-串联质谱法测定鸡肉中9种氟喹诺酮药物残留

建立了分子印迹固相萃取（MISPE）-超高效液相色谱-串联质谱（UPLC-MS/MS）同时测定鸡肉中9种氟喹诺酮药物残留的分析方法。样品经均质处理后,采用磷酸盐缓冲液提取,提取液经MISPE柱净化后,采用BEH C₁₈柱分离,以乙腈-0.1%（v/v）甲酸水溶液为流动相,梯度洗脱,采用电喷雾正离子多反应监测模式,外标法定量。考察了MISPE柱对9种氟喹诺酮药物的吸附特异性;9种药物在0.25~100 μg/L范围内线性关系良好,相关系数（r）>0.9965;检出限和定量限分别为0.08 μg/kg和0.25 μg/kg;在0.25、2.5、5.0 μg/kg添加水平下,9种药物的回收率为65.8%~112.2%,批内、批间RSD分别为0.6%~13.5%和0.5%~14.9%;MISPE的最大柱容量为464.7~932.4 μg/L。该方法灵敏度好、操作简单、快速。