Analytical Study on Propagation Dynamics of Optical Beam in Parity-Time Symmetric Optical Couplers

We present exact analytical solutions to parity-time(P T) symmetric optical system describing light transport in P T-symmetric optical couplers. We show that light intensity oscillates periodically between two waveguides for unbroken P T-symmetric phase, whereas light always leaves the system from the waveguide experiencing gain when light is initially input at either waveguide experiencing gain or waveguide experiencing loss for broken P T-symmetric phase. These analytical results agree with the recent experimental observation reported by Ru¨ter et al. [Nat. Phys.6(2010) 192]. Besides, we present a scheme for manipulating P T symmetry by applying a periodic modulation. Our results provide an efficient way to control light propagation in periodically modulated P T-symmetric system by tuning the modulation amplitude and frequency.     

谐振腔马赫-曾德尔干涉集成光波导陀螺

研究了光学环形腔中的单方向传输光在光学谐振腔中传输的情况，在系统旋转角速率变化时光束会产生频移，在此基础上，设计出一种具有谐振腔马赫-曾德尔干涉集成光波导陀螺结构，可以方便地检测出系统旋转角速率与方向，其检测精度与光波导谐振腔的品质无关。和萨尼亚克集成光波导陀螺相比较，性能价格比有进一步提高的潜力。     

一种高品质中空金属光波导

讨论了高品质中空金属光波导的工作原理及其制作工艺，制备了以金和银作为波导材料的中空波导管，并对空芯以及充入不同透明液体的液芯波导的透光特性进行了测试，结果表明：与中空介质波导相比，中空金属波导具有光传输损耗低，透过率对波导弯曲与失调不甚敏感等优点；而液芯金属波导的透光效率与透明材料的折射系数无关。文中描述了在特定波段内“中空光纤”的原理，并报道了Ｈｅ－Ｎｅ和ＣＯ２激光在中空金壁波导传输的实验结果。     

Optical waveguides structured with photoaligning polymers

We present a novel fast fabrication method for making optical waveguides by using a photoaligning and a liquid-crystal polymer. A difference in the refractive indices in the core and cladding regions is achieved by use of polarized UV light to align the polymer chains differently. A refractive-index difference of Deltan = 0.07 was achieved. The propagation loss in a channel waveguide is 4 dB/cm at a wavelength of 1.55 microm. The fabrication method has only a few processing steps and yields short fabrication times. The waveguide structures offer possibilities for generating devices with new applications related to the polarization of the guided light.     

基于亚毫米尺度金属包覆波导的脉冲展宽

利用自由空间耦合技术,用超短脉冲激发亚毫米尺度对称金属包覆波导中的超高阶导模,提出一种脉冲展宽的新方法。由于超高阶导模的强色散性质,经过短距离的传输,即可使脉冲宽度迅速展宽。理论分析表明,1 ps的光脉冲在光波导中传输毫米量级距离后,脉冲展宽因子可达到1000倍。     

High-Contrast Imaging of Nano-Channels Using Reflection Near-Field Scanning Optical Microscope Enhanced by Optical Interference

We demonstrated a contrast enhancement in a near-field scanning optical microscope (NSOM) by optical interference with an aperture probe in reflection (illumination-collection) mode operation. We observed a NiO film deposited on a sapphire substrate and clearly visualized 2-nm-deep nano-channel structures on the surface of the film. The reflection NSOM enhanced by optical interference is quite a promising instrument for high-resolution optical detection and estimation of low-contrast nanostructures.     

左手介质椭圆光波导基模传播特性

在椭圆柱坐标系中,采用分离变量方法,得出了左手介质椭圆光波导本征方程的近似解,通过数值计算,分析了椭圆波导偏心率、左手介质的电容率、磁导率对椭圆光波导基模传播特性的影响,并将左介质光波导与右手介质光波导基模特性进行对比,得出左手介质光波导的基模特性与右手介质光波导基模特性差别不大的结论.     

基于二维光子晶体点缺陷可调谐光功率分配器

在二维矩形阵列结构硅光子晶体中去除中间一排硅柱形成线波导,在线波导右侧引入点缺陷。利用时域有限差分法(FDTD)模拟仿真以及数值分析研究线波导中光耦合特性,计算出两个通道的分光比,发现改变光子晶体的温度可以明显改变这两个通道的光功率比。基于此结构,提出了一种新的光功率分配器,可以获得大范围的光功率比值,从1∶1～90∶1都可以通过改变光子晶体的温度来实现,并且当温度从0℃～200℃就可以实现这一功能,最后设计了一款三通道可调谐光功率分配器,通过调节两个点缺陷区域内温度来实现光功率的分配。     

Reducing Background Light Interaction in Near-Field Optical Microscopy Using Lateral and Vertical Probe-Dithering

We investigate the effectiveness of differential detection, which is a combination of probe-dithering and synchronous detection, in discriminating near-field light interaction from background light interaction in apertureless near-field optical microscopy (NSOM). The lateral differential NSOM with a photocantilever is more effective than the vertical differential detection, which does not always provide sufficient discrimination. The V-dithering-based lateral differential detection provides apertureless NSOM that can image the optical coupling between sample and probe dipoles, which is an interaction through near-field light.This paper was originally presented at the 5th International Conference on NEAR FIELD OPTICS and RELATED TECHNOLOGIES (NFO-5), which was held on December 6–10, 1998 at Coganoi Bay Hotel, Shirahama, Japan, in cooperation with the Japan Society of Applied Physics and Mombusho Grant-in Aid for Scientific Research on Priority Areas “Near-field Nano-optics” Project, sponsored by Japan Society for the Promotion of Science.     

Self-Absorption Effect in the Spatial Resolved Spectra of CdS Nano-Ribbon Optical Waveguide Observed by Near-Field Spectroscopy

Scanning near-field optical microscopy (SNOM) and spectroscopy were used to study the light emission characteristics of CdS nano-ribbon optical waveguide. A continuous red-shift of photoluminescence (PL) spectra of such nano-ribbons with the increase of the light propagation distance was observed. Near-field optical images indicate that CdS nano-ribbon can work well as an optical waveguide. Quantitative calculation was made to demonstrate the PL attenuation with long propagation distance (typically several hundreds μm). The red shift is attributed to self-absorption, which means re-absorption and re-emission among energy-valleys with different energies of conduction bands. Our results draw attention to the spectral characteristics of nano-ribbon optical waveguides, which are as important as intensity to the stability and veracity of information transmission.     

All Optical Light Deflection and Displacement Using Nonlinear Slab Waveguide

The possibility of all optical control of light deflection and displacement through a planar nonlinear waveguide has been discussed in this article. In this scheme a strong command beam controls the propagation characteristics of a weak signal beam in a nonlinear waveguide. Employing variational approach, we have established a set of coupled nonlinear equations for the displacement of the center of gravity, beam size, deflection angle, and beam divergence of the signal beam. These equations have been solved numerically to confirm the possibility of all optical control of deflection and displacement of a signal beam by a command beam.     

Lateral Waveguiding Properties of VCSELs for Integrated Optical Monitoring

We have investigated experimentally the optical behaviour of a Vertical-Cavity Surface-Emitting Lasers (VCSEL) when it is used as a lateral waveguide. This provides a better understanding of the mechanisms involved in VCSEL optical power monitoring by integrated lateral detection. The lateral optical spectra as well as the waveguide transmission spectrum have been measured. Their analysis and comparison demonstrate that the lateral signal is mostly coming from the spontaneous emission escaping laterally from the VCSEL and that light is filtered during the propagation and detection processes. This allows us to explain previous results obtained in two different configurations of lateral detection. These results are useful to optimize the lateral detection performances for concrete applications in monitoring or telemetry systems.     

Beam Steering Type of 1 : 4 Optical Switch Using Thermo-Optic Effect

We propose a beam steering type optical switch employing a phase shifter. It consists of collimating waveguide mirrors, an arrayed-waveguide which has deep trenches incorporating polymer materials, and input/output waveguides. The incident light is guided to the front mirror, where it is then collimated, and input to the arrayed waveguide. The number of trenches filled with polymer linearly increases in order. The refractive index of the polymer can be controlled with temperature, and the propagation direction of the output light from the arrayed waveguide can also be controlled. A switch with 15 waveguides in the array has been fabricated. The chip size is about 2:5 × 9:0 mm², the insertion loss is 10 dB, and the extinction ratio is about 10–13 dB.     

数码照相法测量离子交换平面光波导损耗特性

利用数码相机对离子交换平面玻璃光波导传输线进行数字成像,根据传输线上的光强分布拟合出光强传输衰减曲线,计算出波导的传输损耗.对光波导进行退火处理,研究了波导退火前后的传输损耗特性.退火后0阶模式下传输损耗由2.148 9 dB·cm－1降为0.746 0 dB·cm－1.结果表明,波导的传输损耗是随着模阶数的增加而递增,适当的退火处理明显改善了离子交换波导的质量.     

亚波长金属波导的光传播和干涉特性研究

利用时域有限差分方法研究了亚波长金属波导TE波的传播特性和基于异常透射现象的干涉特性.对各种参量对驻波特性的影响及两列波导间的耦合特性进行了分析.研究发现,TE波在波导中传播时存在截止宽度,如果波导宽度小于截止宽度,TE波在波导中不能传播;如果波导宽度大于截止宽度,TE波的传播距离将随波导宽度变大而突然增加.当波导宽度达到或大于半波长时,TE波可以在波导中正常传播.金属波导的截止宽度与金属的吸收系数成正比.此外,由于光在亚波长金属波导透射时的异常透射现象,在亚波长金属波导中产生了TE波的干涉现象,能形成驻波.     

Design and Evaluation of an N:N Optical Coupler Using an Integrated Waveguide Mirror

We proposed and fabricated an N:N optical coupler using an integrated waveguide mirror. Optical circuits can be miniaturized with small bending by reflecting mirrors. The parabolic curve was applied to the mirror shape because it was necessary to collimate the reflected beam so as to distribute the input light to the output waveguides. We fabricated the 8:8 optical coupler using silica waveguide. The chip size was about 7mm x 15mm. The excess loss of the device was about 8 dB larger than simulation results calculated using beam propagation method. The dependence on the wavelength and polarization was about 0.4 and 0.15 dB, respectively. The excess loss was mainly attributed to the mirror tilt and will be reduced by optimizing the etching conditions to decrease the mirror tilt angle.     

用于光互连的聚硅氧烷波导弯曲损耗

研究了用于光互连的聚硅氧烷多模光波导直接弯曲时弯曲损耗与圆弧曲率半径的关系。用Marcuse的直波导近似法理论计算了其弯曲损耗,理论计算表明弯曲损耗随模阶数的增加而变大,随半径的减少而变大;光在波导中传输时,总弯曲损耗出现阶跃式变化,并且曲率半径大于4 mm时,波导的弯曲损耗小于1dB/cm。用BeamPROP仿真软件仿真了5、10、20mm三种曲率半径下的传输光场情况。利用数字化散射法测量了其弯曲损耗,实验结果显示曲率半径在5～6mm时弯曲损耗值在0.55～0.8dB/cm之间,考虑所制备的聚硅氧烷直波导固有的传输损耗,实验值与理论值基本相符。     

扫描近场光学显微镜的光耦合偶极子模型

为了研究扫描近场光学显微镜中探针和粗糙样品表面的耦合相互作用,提出了一种光耦合偶极子模型.在该模型中,探针和样品突起都由光极化偶极子表示,在准静态电磁场近似的情况下样品表面的诱导极化效应由影像偶极子表示,应用偶极子辐射理论可以得到系统的自洽场方程.此模型提供了一种直观分析扫描近场光学显微镜中探针和样品相互作用机理的方法.在此基础上,进一步讨论了金属样品的近场成像特点和其特有的局域光学共振现象.数值结果表明：不同于一般的介质样品,金属样品的近场图像与入射光频率直接相关,改变入射光的频率,获得的样品近场图像的形状和对比度都会发生变化.特别是当入射光频率处于样品极化共振范围内时,金属纳米粒子的极化率会出现光极化共振,这样就可以获得样品粒子的最大有效尺寸,为提高系统的分辨率提供了一条重要途径.     

Optical amplification in Er/Yb silicate slot waveguide

Active slot waveguides were fabricated by embedding low-index Er/Yb silicate material in high-index silicon. A 1.7 dB signal enhancement at 1.53 μm in a 6 mm-long slot waveguide was observed through 1476 nm pumping. The peak Er emission cross-section is determined as 7.53×10(-21) cm2 and the excited Er ion fraction is 0.17. Our experiment shows that the defects in upper c-Si of Si-on-insulator (SOI) and deposited α-Si distorts photoluminescence spectrum and prevents further optical amplification. This negative effect can be partly corrected through annealing treatment, which allows better propagation of the pump light, therefore, stronger excitation in the sandwiched Er/Yb silicate. The defects also affect the 1.53 μm decay curve and are the dominant lifetime reduction mechanism in the active slot waveguide.     

基于平板波导的小型红外光栅光谱仪光学设计

为实现红外光谱仪器的小型化,通过分析现有小型光谱仪,提出了一种基于平板波导的小型红外光栅光谱仪的设计方法。平板波导光谱仪的小型化原理与一般的微小型光谱仪不同。在平板波导光谱仪中,光束被限制在一层薄薄的平板波导介质中传播,看起来像是整个光学系统被压扁了。在垂直于平板波导的方向上光学元件的尺寸可以做到很小,从而显著减小光学系统的尺寸。该系统的设计可分为Czerny-Turner结构设计、波导结构设计。先根据像差理论设计Czerny-Turner结构,目标是保证光谱分辨率及校正像差;然后根据几何光学理论设计波导结构,包括平板波导和两个柱面透镜,目标是压缩光束并校正像散;最后将它们输入Zemax软件中进行综合优化,以获得最优的光学系统。据此方法设计了一个平板波导红外光栅光谱仪,工作波段为8~12 μm,数值孔径为0.22,采用线阵探测器。通过Zemax软件对结果进行分析和评价,表明仪器光学系统的尺寸为130 mm×125 mm×20 mm,工作波段内光谱分辨率达到80 nm,满足设计指标要求。证明了该优化设计方法是可行的,所得系统尺寸小、性能高。