新型树枝状分子3,5-二[3,5-二(4-羧基苯甲氧基)苯甲氧基]苯甲醇的合成

采用收敛法,以对氰基苄溴和3,5-二羟基苯甲醇为原料,依次合成了端基为腈基的芳醚树枝状分子3,5-二(4-腈基苯甲氧基)苯甲醇(4)和3,5-二[3,5-二(4-腈基苯甲氧基)苯甲氧基]苯甲醇(6);4与6分别经水解制得以羧基为端基的新型芳基苄醚树枝状分子3,5-二(4-羧基苯甲氧基)苯甲醇和3,5-二[3,5-二(4-羧基苯甲氧基)苯甲氧基]苯甲醇,其结构经UV-Vis,1H NMR,IR,MS和元素分析表征.     

Studies on mesoionic compounds,II. The solvent effect on the electronic absorption spectra of mesoionic 2,3-diaryl-2H-tetrazolium-5-thiolate derivatives

The electronic absorption spectra of 2,3-di(2-fluorophenyl)-, 2,3-di(4-fluorophenyl)-, 2,3-di-(2-chlorophenyl)-, 2,3-di(2-methylphenyl)-, 2,3-di(4-methylphenyl)- and 2,3-di(2-methoxyphenyl)-2H-tetrazolium-5-thiolates have been measured in pure and mixed solvents. They were found to exhibit three characteristic absorption bands at 480-380 nm, near 250 and near 210; the longest wavenlength band of which was assigned to an n → π* transition.     

Novel synthesis of cis-3,5-disubstituted morpholine derivatives

1-tert-Butyl-2-(allyloxymethyl)aziridine has been transformed for the first time diastereoselectively into cis-3,5-di(bromomethyl)-4-tert-butylmorpholine via an electrophile-induced ring closure using bromine in dichloromethane. The latter morpholine has been used as a substrate for the synthesis of the corresponding 3,5-di(methoxymethyl)morpholine and 3,5-di(cyanomethyl)morpholine upon nucleophilic displacement of both bromo atoms. Further evaluation of this protocol toward the synthesis of 4-arylmethyl- and 4-alkylmethyl-3,5-di(bromomethyl)morpholines showed that the premised cyclization of the corresponding 2-(allyloxymethyl)aziridines into 3,5-di(bromomethyl)morpholines only proceeded well for the N-neopentylmorpholine, which was subsequently transformed into a 3-oxa-7-thia-9-azabicyclo[3.3.1]nonane derivative. Also, in some other cases, the desired 3,5-di(bromomethyl)morpholines were isolated in low yields and transformed into the corresponding 3,5-di(cyanomethyl)morpholines.     

Synthesis of Poly（p-phenyleneethynylene）s with Crosslinkable End or Side Groups and Its Solid State Structure and Optical Properties Before and after Crosslinking

Two crosslinkable poly(p-phenyleneethynylene)s(PPEs): poly[2,5-di(2'-ethyl-hexyloxy)-1,4-phenylenee-thynylene] with end-capped vinyl(PPE1) and poly[2,5-di(allyloxy)-1,4-phenyleneethynylene-2,5-di(2'-ethyl-hexyloxy)-1,4-phenyleneethynylene](PPE2) were synthesized. Via the thermal addition reactions of vinyl end groups of PPE1 and allyloxy side groups of PPE2, crosslinked polymers C-PPE1 and C-PPE2 were obtained, respectively. The two polymers were characterized by wide-angle X-ray diffraction(WXRD), ultravio...     

Synthesis of porphyrin nitrogen mustards with potential anti-tumor activities in chemotherapy and photodynamic therapy

2,7,12,18-Tetramethyl-13,17-di[3′-N, N-di(2″-chloroethyl)aminopropyl]porphin and its 3,8-di(1′-alkyloxyethyl)-analogous or porphyrin-nitrogen mustards were synthesized for the first time. Their structures were determined by spectroscopies and elemental analyses. Most of the compounds possess both the chemotherapeutic and photodynamic effects on tumor and deserve further investigation.     

新型苝酰亚胺衍生物的合成及其光学性能

以3,4,9,10-苝四酸二酐为原料,设计并合成了三个新型的苝酰亚胺衍生物———N,N’-二(1-戊基己基)-3,4,9,10-苝四羧酸二酰亚胺,N,N’-二(1-戊基己基)-1,6,7,12-四(对叔丁基苯氧基)-3,4,9,10-苝四羧酸二酰亚胺和N,N’-二(4-六氟异丙醇基苯基)-1,6,7,12-四(对叔丁基苯氧基)-3,4,9,10-苝四羧酸二酰亚胺,其结构经1H NMR和MS表征。用UV-Vis和荧光光谱研究了他们的光学性质。     

Preparation,characterization and reactions of novel vicinal dibenzotriazol-1-yl derivatives of benzotriazole and glyoxal

A variety of novel 1,2-disubstituted-1,2-di(benzotriazol-1-yl)ethane and 1,2-di(benzotriazol-1-yl)ethylene derivatives were prepared from the adduct of benzotriazole and glyoxal.     

Synthesis of conjugated 2 and 2,5-(ethenyl) and (ethynyl)phenylethynyl thiophenes: fluorescence properties

Nano conjugated thienylethenyl and thienylethynyl compounds with controlled structure and dimensions have been efficiently prepared, by heterocoupling reaction between 1,4-(thienylethynyl)phenylacetylene (or thienylethenyl)phenylacetylene and 2- or 2,5-dihalothiophene. Conjugated 1,4-di(2-thienylethynylphenyl)- (or 2-thienylethenylphenyl)-1,3-butadiyne were obtained by the homocoupling of the terminal acetylenes in excellent yield. The end-capped (N,N-dimethylaminophenyl)- and [3,5-di(trimethylsilylethynyl)-1-ethynyl]-2,5-di(phenylethynyl)_nthiophene were obtained by the heterocoupling between the corresponding terminal acetylene and 2,5-di(iodo)thiophene, catalyzed by the bis(triphenylphosphine)palladium and cuprous iodide system in excellent yield.     

The improvement of π-conjugation by the lateral benzene of anthracene and naphthalene

The 1,4-diarylnaphthalenes, 1,4-diarylanthracenes, and 9,10-diarylanthracenes containing the different side arenes, including phenyl, 2-thienyl, and 2-furyl groups, were synthesized to study the influence of structures on π-conjugation. According to photophysics and computation, the smaller dihedral angles and the lateral benzene of anthracene would increase the π-conjugation in some cases. Compared to 1,4-diarylnaphthalenes, 1,4-di(thien-2-yl)anthracene, 1,4-di(fur-2-yl)anthracene, and 9,10-di(fur-2-yl)anthracene displayed better π-conjugation in both of the ground and fluorescing excited states, but 9,10-di(thien-2-yl)anthracene only showed better π-conjugation in the fluorescing excited state.     

新型对称烷基咪唑离子液体介质中酶催化合成l-乙酸薄荷酯

设计合成三种新型对称烷基咪唑六氟磷酸盐离子液体——1,3-二正丁基咪唑六氟磷酸盐([DnBIM][PF6]), 1,3-二异丁基咪唑六氟磷酸盐([DiBIM][PF6])和1,3-二仲丁基咪唑六氟磷酸盐([DsBIM][PF6]). 以脂肪酶pseudomonas cepacia催化l-薄荷醇和乙酸酐的酯化过程为模型反应, 分别考察不同介质中酶的活性、反应性和稳定性, 结果表明作为反应介质三种新型离子液体均优于经典离子液体1-正丁基-3-甲基咪唑六氟磷酸盐和有机溶剂正己烷. 在三种新的离子液体中, [DiBIM][PF6]具有最好的亲生物性而被选择作为模型反应介质. 此外, 影响l-薄荷醇转化率的各种因素(包括反应温度、底物投料比、离子液体用量和含水量)及酶的重复利用性也被详细研究. 在最佳反应条件下, l-薄荷醇转化率达到97.4%, 酶促反应速度、平衡转化率和半衰期分别是正己烷中的12.7, 4.6和15.1倍. 脂肪酶重复使用10次后催化活性没有明显减少. 由于三种新型离子液体互为同分异构体, 以上事实还表明除憎水性和亲核性以外离子液体的空间构型也是影响酶行为的一个重要因素.     

多胺配体及其配合物的合成与热力学性质研究

合成并表征了5个多胺配体N，N′-二(1，10-菲罗啉-2-亚甲基)-1，2-乙二胺(L1)，1，7-二(1，10-菲罗啉-2-亚甲基)-1，4，7-三氮杂庚烷(L2)，1，10-二(1，10-菲罗啉-2-亚甲基)-1，4，7，10-四氮杂癸烷(L3)，1，13-二(1，10-菲罗啉-2-亚甲基)-1，4，7，10，13-五氮杂十三烷(L4)，N，N′-二(1,10-菲罗啉-2-亚甲基)-1，3-丙二胺(L5)。利用pH电位滴定法在25.0 ± 0.1 ℃时测定了这5个配体的质子化常数及其与Co(Ⅱ)，Ni(Ⅱ)，Cu(Ⅱ)和Zn(Ⅱ)形成配合物的稳定常数，并且试图解释了这5个系列配合物的差异。     

Radiation Aging of Cross-Linked Poly(Methyl Methacrylates)

Radiation aging of poly(methyl methacrylate) and copolymers of methyl methacrylate with trans-1,2-di(methacryloxy)cyclohexane, 3,4-di(methacryloxy)sulfolane, and 9,10-di(methacryloxymethyl)anthracene was studied.     

矩形多环芳烃的合成

本文用3,4-二苯基-2,5-二(3,5-二溴苯基)环戊二烯酮(4a)与二苯乙炔(5a)通过Diels-Alder环加成反应得到1,2,4,5-四苯基-3,6-二(3,5-二溴苯基)苯(6a)。化合物6a通过经典的Suzuki偶联反应得到1,2,4,5-四苯基-3,6-二(3,5-二(4-十二烷基噻吩))苯基苯(8a),再利用Fe Cl3作为氧化剂发生Scholl氧化脱氢关环反应,得到目标化合物1a。采用类似合成方法,得到目标化合物1b。化合物的结构均通过1H NMR和MALDI-TOF MS表征,并对其光谱特征、热性能及电学性能进行了初步研究。     

Halofluorination of 1,2-difluoro-1,2-di(p-tolyl)ethene, 1,2,3,4-tetrafluoro-1,4-di(p-tolyl) butadiene and its nonfluorinated parent compounds

The reactions of (E)-1,2-difluoro-1,2-di (p-tolyl) ethene (1) with N-bromo- or N-chlorosuccinimide gave mainly the expected halofluorination products 1-bromo-1,2-di(p-tolyl)-1,2,2-trifluoroethane (2) or 1-chloro-1,2-di(p-tolyl)-1,2,2-trifluoroethane (4), respectively. As a side reaction halogenation of the double bond has been obtained. With (E,E)-1,4-di(p-tolyl)-1,2,3,4-tetrafluorobuta-1,3-diene (6) under the same conditions the products of 1,2- and 1,4-addition or its consecutive hydrolysis products were isolated. (E)-Stilbene (19) on bromofluorination gave solely erythro-1-bromo-2-fluoro-1,2-diphenylethane (20), while with 1,4-diphenylbuta-1,3-diene (17) mainly higher molecular weight products were formed.     

The reaction of β-lactam carbenes with 3,6-dipyridyltetrazines: switch of reaction pathways by 2-pyridyl and 4-pyridyl substituents of tetrazines

The reactions of β-lactam carbenes with both 3,6-di(2-pyridyl)tetrazine and 3,6-di(4-pyridyl)tetrazine were studied. It was found that β-lactam carbenes reacted with 3,6-di(2-pyridyl)tetrazine to produce 5-triazolo[1,5-a]pyridylpyrrol-2-ones in good yields, while with 3,6-di(4-pyridyl)tetrazine, they afforded pyrido[c]cyclopenta[b]pyrrol-2-ones in moderate yields. Both reactions were proposed to follow cascade mechanisms containing a 3,6a-dipyridylpyrrolo[3,2-c]pyrazol-5-one intermediate. The different pathways of the transformation of pyrrolo[3,2-c]pyrazol-5-ones were switched by the 2- and 4-pyridyl substituents. This work not only provided a simple and efficient strategy for the construction of novel triazolo[1,5-a]pyridine and pyrido[c]cyclopenta[b]pyrrole derivatives, respectively, but also revealed two different thermal transformation patterns of 3H-pyrazole compounds.     

Reductive cleavage of dichalcogenide bonds

Electrochemical reduction of 1,2-di(2,4,6-triphenylpyridinium-l)ethane, 1,4-di(2,4,6-triphenylpyridinium-1)butane, 1,6-di(2,4,6-triphenylpyridinium-l)hexane, 1,4-di(N-methyl-4,6-diphenylpyridinium-2)benzene, and 2,7-di(N-methyl-4,6-diphenylpyridinium-2)fluorene in solutions of DMF and MeCN in the potential range from−0.8 to −1.7 V (SCE) was studied by CV. The successive formation of stable radical cations, biradicals, and dianions was investigated by semiempirical MO calculations at the PM3 level.     

Coupling and Cyclization of Sydnone Compounds

Cyclization were occurred via the coupling reactions of some mercuric chloride derivatives of sydnone with LiPdCl₃-CuCl₂. A unique six-membered ring, 3,3′-ethylene-4,4′-bissydnone, was obtained by the cyclization reation of 1,2-di[3-(4-chloromercuric)sydnonyl]ethane. However, the seven-membered 3,3′-trimethylene-4,4′-bissydnone and 1,3-di[3-(4-chloro)sydnonyl]-propane were obtained from the corresponding mercuric chlroide of sydnone. Onyl substitution reaction took place when 4,4′-di[3-(4-chloromercuric)sydnonyl]biphenyl, 4,4′-di[3-(4-chloromercuric)sydnonyl]benzene, di(p-[3-(4-chloromercuric)sydnonyl]-phenyl}methane and, di(p-[3-(4-chloromercuric)sydnonyl]phenyl]ether were treated using the same process.     

Interaction of (z)-4-bromo-1,3-di(2-thienyl)- 2-buten-1-one with amines,synthesis of di(2-thienyl)azolo[<Emphasis Type="Italic">a</Emphasis>]pyridines

(Z)-4-Bromo-1,3-di(2-thienyl)-2-buten-1-one was obtained by the bromination of 1,3-di(2-thienyl)-2-buten-1-one by NBS in anhydrous CCl₄. The starting butanone was obtained by the condensation of 1-(2-thienyl)-1-ethanone by the action of SOCl₂. The reaction of (Z)-4-bromo-1,3-di(2-thienyl)-2-buten-1-one with tertiary amines such as Et₃N, pyridine, 1-alkyl-1,3-diazole, 1-alkylbenzimidazole, and 1-alkyl-1,2,4-triazole leads to quaternary salts. The azolium salts cyclize by the action of base to give di(2-thienyl)azolo[a]pyridinium derivatives. 3-Methyl-6,8-di(2-thienyl)[1,3]thiazolo[3,2-a]pyridin-4-ium and 2,4-di(2-thienyl)pyrido[2,1-b]benzothiazol-10-ium bromides were obtained by the same procedure but without separating the intermediate quaternary salts.     

Synthesis of substituted disulfonyl-containing polycyclic azines with the bridgehead nitrogen atom. Effects of the structure of 3-substituted pyridinium ylides on the regioselectivity of their reactions with <Emphasis Type="Italic">E</Emphasis>-1,2-di(alkylsulfonyl)-1,2-dichloroethenes

Heating the substituted pyridinium and isoquinolinium salts with E-1,2-di(alkylsulfonyl)-1,2-dichloroethenes in either chloroform or acetone in the presence of three-fold excess of Et₃N gave high yields of substituted 1,2-di(alkylsulfonyl)indolizines and 1,2-di(alkylsulfonyl) pyrrolo[2,1-a]isoquinolines, respectively. Effects of the structure of 3-substituted pyridinium ylides on the regioselectivity of their reaction with E-1,2-di(alkylsulfonyl)-1,2-dichloroethenes were revealed. It was shown that the presence of electron-releasing and electron-withdrawing substituents in the pyridinium ylide favors the formation of 8-substituted and 6-substituted 1,2-(dialkylsulfonyl)indolizines, respectively.     

Photocurrent generation in multilayer organic-inorganic thin films with cascade energy architectures

Zirconium organobisphosphonate multilayer thin films of viologen derivatives were grown on copper dithiolate multilayers of 5,15-di(p-thiolphenyl)-10,20-di(p-tolyl)porphyrin (POR) and 5,15-di(p-thiolphenyl)-10,20-di(p-tolyl)porphyrinzinc (ZOR) on a variety of substrates (e.g. Au, SiO(2)), using solution depositions methods. The multilayer structures were studied by atomic force microscopy, UV-vis spectroscopy, and ellipsometry. In the case of copper dithiolate thin films, layer-by-layer lamellar growth with low surface roughness resulted, while higher surface roughness was observed in the growth of Zr viologen bisphosphonate films. Gold electrodes modified with zirconium bisphosphonate multilayers of viologen on top of copper dithiolate multilayers of porphyrin derivatives (ZOR or POR) were photoelectroactive and produced efficient and stable photocurrents using visible light. By arranging the zinc-porphyrin (ZOR) and the free base porphyrin (POR) donors in an energetically favorable fashion, according to their redox potentials and optical energy gaps, the photoinduced charge separation was improved, and higher photocurrent quantum yields ( approximately 4%) and fill factor ( approximately 50%) of the photoelectrode were achieved.