邻甲酚在类水滑石、焙烧及改性类水滑石上的吸附

用液相非稳态共沉淀法制备了Mg-Al 类水滑石(HTlc); Mg-Al HTlc 于450 ℃下焙烧得焙烧类水滑石(CHTlc); 采用结构重建法由CHTlc 制备了十二烷基硫酸根(DS－)插层(改性)类水滑石(DS·HTlc). 研究了邻甲酚在Mg-Al HTlc,CHTlc 和DS·HTlc 上的吸附行为: 邻甲酚在Mg-Al HTlc, CHTlc 和DS·HTlc 上的吸附动力学和等温式均分别符合准二级动力学方程和Freundlich 方程, 且吸附速率和吸附量大小均依次为: DS·HTlc>>CHTlc>HTlc; 在初始pH＝5.00～13.00 范围内, 邻甲酚在HTlc 和CHTlc 上的吸附量随pH 值的增加先增加后减小, 随温度的增加而增加, 邻甲酚在DS·HTlc 的吸附量随pH 值和温度的增加而降低; 邻甲酚在HTlc, CHTlc 和DS·HTlc 上的吸附量均随电解质(NaCl)浓度的增加而增加, 探讨了吸附机理. 研究结果表明, DS·HTlc 有望成为一种新型的高效酚类有机污染物处理剂.     

肼类衍生物在五元唑类杂环合成中的应用进展

简要概述了肼类衍生物的结构及反应活性,总结了近十年来肼类衍生物分别在合成五元唑类杂环如吡唑、噻唑、1,3,4-噁二唑、1,3,4-噻二唑以及三唑类化合物,及其相关的稠杂环如吡唑并某环、s-三唑[3,4-b][1,3,4]-噻二唑、s-三唑[3,4-b][1,3,4]-噻二嗪,以及含有1,2,4-三唑的稠杂环化合物等合成中的应用进展.     

类吗啡类拮抗物的结构与抑食活性的3D-QSAR研究

用比较力场分析研究了3,4-二甲基-4-(3-羟基苯基)哌啶及其衍生物类吗啡拮抗物的结构与抑食活性的关系,考察了网格结构和探针原子的影响.结果表明,立体效应和静电作用场是描述其抑食活性和进行结构性能关系研究的最重要的结构参数.     

哒嗪核苷类的研究进展

众所周知,许多嘧啶的核苷类化合物都有较强的生理活性,其中5-氟脲苷是有效的抗癌药。而哒嗪和嘧啶在结构上具有同分异构关系,因此,对于哒嗪核苷类化合物的合成及其生     

吸附在活性炭上的二氧六环类固相和类液相性质的NMR研究

物理吸附在活性炭上的有机分子的性质,一直是人们感兴趣的问题。近年来,人们开始用NMR梯度场和核弛豫的方法,研究活性炭上吸附分子的扩散运动和分子交换运动.由于吸附分子在活性炭上处于不同的状态,其核弛豫表现出快、慢两个过程。通过拟合磁化矢量随时间变化的曲线,可以得到不同状态分子的百分含量。本文采用核弛豫的方法,研究活性炭的表面酸性基团及孔径对被吸附的二氧六环(DO)类固相和类液相形成的影响.并对不同吸附量下,DO在活性炭上的吸附行为进行讨论。     

有机磷酸酯类中毒与肟类解毒剂

有机磷进入人体后与乙酰胆碱酯酶结合，形成磷酰化ＣＨＥ，使ＣＨＥ失去水解乙酰胆碱的能力，导致乙酰胆碱在体内的聚集，引起一系列中毒症状，甚至死亡。     

吲哚类生物碱的合成研究进展

吲哚类生物碱是具有吲哚分子骨架的一类化合物,具有多种良好的生理活性。文章综述了近年来新发现吲哚类生物碱的合成研究进展,介绍了(-)-Arboricine,(±)-cis-Trikentrin A,(-)-Corynantheidol等化合物的合成方法。     

无机类分子性铁磁体的设计

分子性铁磁体的设计及合成是当今化学界的热点课题之一，无机类分子性铁磁体是一类重要的分子性铁磁体。本文论述这类分子性磁体的设计途径以及最新研究进展。     

HPLC法对鱼肉中3种四环素类和5种氟喹诺酮类兽药残留的同时测定

建立了水产品中四环素类和氟喹诺酮类兽药多残留同时检测的高效液相色谱分析方法。样品经甲醇-水（体积比2：8,pH5．3）提取,C18固相萃取小柱净化,以甲醇-丙二酸＋氯化镁水溶液作流动相,梯度洗脱,紫外检测器检测。对样品前处理和色谱分析条件进行了优化,8种抗生素（土霉素、四环素、金霉素、沙拉沙星、恩诺沙星、达氟沙星、环丙沙星、单诺沙星）在0．1～10mg／L范围内线性关系良好。方法的检出限（S／N=3）为0．011～0．051mg／kg,定量下限（S／N=10）为0．035～0．17mg／kg,平均加标回收率为81％～96％,相对标准偏差（RSD）为2．5％～10．5％。该方法适用于水产品中抗生素多残留的测定。     

毛细管电泳法同时分析茶黄素类和儿茶素类化合物

为了建立一种快速、准确、简便的同时分析茶黄素类和儿茶素类化合物的毛细管电泳方法以满足茶黄素体外氧化制备过程监测和茶多酚酶促氧化动力学研究的需要,研究了毛细管电泳同时分析4种茶黄素类和6种儿茶素类化合物的最佳分析条件,并将建立的方法进行应用评价。结果表明:以含有200 mmol/L H3BO3(pH 7.7)、10 mmol/L KH2PO4、9 mmol/L β-环糊精和27.5%乙腈为电泳介质,在电压25 kV、柱温30 ℃下分离和200 nm波长处检测,可在8 min内将10种待测组分全部分离,且各组分的浓度与峰面积呈良好的线性关系,相关系数r为0.9907～0.9998,检测限为0.39～0.88 μg/mL,各组分的加标回收率为91.5%～113.5%,相对标准偏差小于5%。     

各种孔结构活性炭吸附苯、环己烷、正戊烷和正己烷的~1H和~(13)C NMR研究

~1H和~(13)C NMR研究证明被吸附在不同孔结构活性炭中的烃类以毛细管凝聚和吸附在固体表面两种状态存在。链状烷烃平铺地吸附在固体表面。被吸附烃与活性炭表面酸性基团的质子交换在弛豫过程中起着重要作用。     

吸附在活性炭上的苯和环己烷的NMR弛豫研究

被吸附分子的NMR弛豫测量可以提供该分子的运动和吸附状态等信息。近来证明,多孔固体中被吸附物的自旋晶格弛豫的测量(T_1)是孔径大小和孔结构分析及多孔物质渗透性能测量的有力工具这是基于靠孔壁近的分子比远离固体表面的分子自旋晶格弛豫     

几种典型国产活性炭吸附各种烃类的NMR研究——Ⅱ. 苯、环己烷、正戊烷和正己烷吸附的1H NMR研究

活性炭吸附苯、环己烷、正戊烷和正已烷的测量表明, 在同一种活性炭中各烃的饱和吸附体积相同, 四种烃的吸附量与其摩尔体积成反比。同一种被吸附物在不同活性炭中的吸附量与各活性炭的比孔容和孔径分布有关。活性炭的比孔容大, 且孔径小于3.0 nm的微孔比例大时, 其吸附和解吸容量也大。这些体系的~1H NMR研究进一步证实了孔径小于3.0 nm的微孔中发生毛细管凝聚, 导致吸附和解吸的容量增大。被吸附分子的自旋晶格弛豫时间几乎不随被吸附物的种类而异。他们与活性炭表面上酸性基团总量有较好的曲线关系。     

Monte Carlo Calculations of Polymer Adsorption at the Entrance of Cylindrical Pores in Flat Adsorbing Surfaces

The influence of surface interactions on the conformation of flexible polymers partially confined inside narrow cylindrical pores in a flat surface is studied above the critical adsorption energy in a good solvent. We use a static configurational bias computational sampling method to calculate the adsorption free energy and the radius of gyration components parallel and perpendicular to the pore axis as a function of the polymer center of mass position at different degrees of confinement. We find strong free‐energy minima just in front of the pore entry for all degrees of confinement studied. At the location of the free‐energy minimum, polymers are partially adsorbed inside the pore and on the outer solid surface and adopt “drawing pin”‐like conformations. A distinct maximum in the average loop length at the pore entry indicates that the polymer bridges the pore entry of small pores.     

热致相分离技术制备聚氨酯多孔膜的条件控制

采用自制的模具 ,利用热致相分离 (TIPS)的原理制备了聚氨酯 (PU)多孔膜 ,并重点研究了聚合物浓度对多孔膜的表面形貌、孔度大小、孔隙率和透湿率的影响 .在不同的聚合物浓度条件下制备的PU多孔膜的共同特征是底面 (与成膜平台接触面 )光滑平整 ,孔洞尺寸较小 ,为纳米级 ;而表面 (与空气接触的自由面 )的形貌结构较为复杂 ,但都有明显的孔洞出现 ,且孔洞的尺度大于底面 ,在微米级以上 .聚氨酯 1,4 二氧六环 (DO)形成的是上临界共溶温度 (UCST)体系 ,在发生相分离后底面与表面粗化时间的不同是导致形貌结构差异的主要原因 .改变冷台温度或调整DO H2 O的比例也会对PU多孔膜的孔度大小和形貌结构产生明显的影响     

Hierarchically porous carbon membranes derived from PAN and their selective adsorption of organic dyes

Porous carbon membranes were favorably fabricated through the pyrolysis of polyacrylonitrile(PAN) precursors, which were prepared with a template-free technique-thermally induced phase separation. These carbon membranes possess hierarchical pores, including cellular macropores across the whole membranes and much small pores in the matrix as well as on the pore walls. Nitrogen adsorption indicates micropores(1.47 and 1.84 nm) and mesopores(2.21 nm) exist inside the carbon membranes, resulting in their specific surface area as large as 1062 m2/g. The carbon membranes were used to adsorb organic dyes(methyl orange, Congo red, and rhodamine B) from aqueous solutions based on their advantages of hierarchical pore structures and large specific surface area. It is particularly noteworthy that the membranes present a selective adsorption towards methyl orange, whose molecular size(1.2 nm) is smaller than those of Congo red(2.3 nm) and rhodamine B(1.8 nm). This attractive result can be attributed to the steric structure matching between the molecular size and the pore size, rather than electrostatic attraction. Furthermore, the used carbon membranes can be easily regenerated by hydrochloric acid, and their recovery adsorption ratio maintains above 90% even in the third cycle. This work may provide a new route for carbon-based adsorbents with hierarchical pores via a template-free approach, which could be promisingly applied to selectively remove dye contaminants in aqueous effluents.     

Molecular dynamics simulation studies of the conformation and lateral mobility of a charged adsorbate biomolecule: implications for estimating the critical value of the radius of a pore in porous media

The conformations, the values of the lateral transport coefficient of a charged biomolecule (desmopressin) in the adsorbed layer and in the liquid layers above the adsorbed layer, the potential energies of the interaction between the biomolecules located in different liquid layers with the charged solid surface and with the biomolecules in the adsorbed layer, the potential energies of the interaction between water molecules in the hydration layers surrounding the conformations of the biomolecules in different layers, as well as the structure and number of hydration layers between the different conformations of desmopressin, were determined by molecular dynamics simulation studies. The results show that the lateral mobility of the adsorbed desmopressin is approximately equal to zero and the value of the lateral transport coefficient of the biomolecule in the liquid layers located above the adsorbed layer increases as the distance of the liquid layer from the charged solid surface increases. But the values of the lateral transport coefficient of the biomolecule in the liquid layers above the adsorbed layer are lower in magnitude than the value of the transport coefficient of desmopressin along the direction normal to the charged solid surface in the liquid phase located above the vacant charged sites of the solid surface, and these differences in the values of the transport coefficients have important implications with respect to the replenishment of the biomolecules in the inner parts of a channel (pore), the overall rate of adsorption, and the form of the constitutive equations that would have to be used in macroscopic models to describe the mechanisms of mass transfer and adsorption in the pores of adsorbent media. Furthermore, a novel method is presented in this work that utilizes the information about the sizes of the conformations of the biomolecule in the adsorbed layer and in the liquid layers above the adsorbed layer along the direction that is normal to the charged solid surface, as well as the number and size of the hydration layers along the same direction, and could be used to estimate the value of the lower bound of the linear characteristic dimension of a pore (i.e., pore radius) in porous adsorbent media (e.g., porous adsorbent particles; skeletons of porous monoliths) in order to realize effective transport and overall adsorption rate.     

Anomalous chemical shifts of organic molecules adsorbed on spherical carbon adsorbents

The adsorption of simple organic molecules on synthetic carbon adsorbents of the SCA brand, thermovacuum treated at 2273 K, was studied by the PMR method. It was found that adsorbed molecules appear in the PMR spectra in the form of one or several signals, shifted toward strong magnetic fields in comparison with the proton signal of molecules in the condensed phase. The strongest shielding effect on the part of the surface of the material is experienced by adsorbent molecules in the SCA micropores. It was shown that the chemical shift does not depend on the nature of the adsorbed molecules and is apparently determined by the site of coordination in the interplanar gap of the graphitized portions of the carbon material. It is suggested that the anomalous values of the chemical shift of the protons of the adsorbed molecules are due to the influence of ring currents of the graphitized surface.Translated from Teoreticheskaya Éksperimental'naya Khimiya, Vol. 28, No. 1, pp. 80–85, January–February, 1992.