Ni原子活化氨分子理论研究

在UB3LYP/6-311＋＋G(3df,3pd)水平下, 详细研究了Ni活化NH₃分子的单重态和三重态势能面, 并用分子中的原子量子理论(Quantum Theory of Atom-in-Molecular, QTAIM)计算了势能面上所有驻点的性质. 计算结果表明, 单重态势能面有两条反应途径, 而三重态势能面仅有一条反应途径. 第一个N—H断开的活化能较低, 为99.96 kJ/mol, 活化自由能为100.86 kJ/mol,在常温下就可以进行; 第二个N—H键断裂所需能量高达200 kJ/mol, 不容易进行. 在合适温度下, Ni可以活化NH₃得到三重态HNiNH₂, 这表明Ni可以作为活化NH₃分子的良好催化剂.     

丁醇醛和丁醇酸热解形成CO和CO2机理的密度泛函理论研究

采用密度泛函理论方法B3LYP/cc-pVTZ,对模型化合物2,3,4-羟基丁醛的脱羰基和2,3,4-羟基丁酸的脱羧基反应机理进行了量子化学理论研究。对两种模型化合物分别设计了三种热解反应途径,计算了不同温度下各热解反应途径的标准热力学及动力学参数。计算结果表明,纤维素热解过程中CO₂和CO的逸出分别与脱羧基和脱羰基反应相对应,脱羧基和脱羰基反应均为分子内氢原子转移的协同过程。脱羰基反应是吸热反应,而脱羧基反应是放热反应。饱和丁醇醛的脱羰基反应反应能垒为288.8 kJ/mol,脱水后的不饱和烯醇醛的脱羰基反应能垒增大;饱和丁醇酸的脱羧基反应能垒较高,为303.4 kJ/mol,脱水后的不饱和烯醇酸的脱羧基反应能垒明显减小,这说明脱水有利于CO₂的生成。     

纤维素热解形成左旋葡聚糖机理的理论研究

采用密度泛函理论UB3LYP/6-31G(d)方法,对模型化合物纤维二糖热解反应机理进行了量子化学理论计算研究。设计了三种可能的热解反应途径,对各种反应的反应物、产物、中间体和过渡态的结构进行了能量梯度全优化,计算了不同温度下热解反应的标准热力学和动力学参数。计算结果表明,糖苷键均裂而形成两个自由基中间体IM₁a和IM₁b,吸收热量为321.26kJ/mol,中间体IM₁a经过渡态TS₁a进一步形成左旋葡聚糖P₁,反应势垒为202.72kJ/mol;与分步反应相比,纤维二糖经过渡态TS₂协同反应直接形成左旋葡聚糖P₁和吡喃葡萄糖P₂的反应势垒低于分步反应的总势垒,其反应势垒为377.54kJ/mol;H⁺的加入有利于糖苷键的断裂,断裂形成的中间体IM₃很难进一步反应形成左旋葡聚糖。     

DFT方法研究酸性沸石上苯与乙烯烷基化反应的机理

采用B3LYP/6-31G*水平计算来研究酸性沸石上苯与乙烯的烷基化反应历程,从生成能和反应活化能角度分析并讨论了苯与乙烯的反应机理.选取4T簇模型模拟分子筛的酸性位,使用密度泛函理论对烷基化反应三种不同的反应机理(两个联合反应机理和一个分步反应机理)进行计算分析.结果表明,在联合反应机理中,乙烯的质子化和苯与乙烯间C-C键的形成同时发生;分步反应机理中,首先形成一个稳定的乙醇盐中间物种,然后与苯分子反应形成乙苯.联合机理速控步骤的活化能约为160kJ/mol,分步机理速控步骤的活化能为190.24kJ/mol,因此,酸性沸石上苯与乙烯烷基化反应机理主要以联合机理为主,但分步机理与其有一定程度的竞争。     

丁二酸脱水制备丁二酸酐的微观反应机理研究

丁二酸脱水法是工业生产丁二酸酐的方法之一. 用量子化学密度泛函理论(DFT)对该反应的微观机理进行了详细研究, 得到了该反应的微观过程. 根据计算和分析可知: 丁二酸脱水制备丁二酸酐的微观反应途径为IM1→TS1→IM2→TS2→IM3→TS3→P＋H₂O, 在反应过程中IM3为氢键复合物, 整个反应的速控步为IM3→TS3→P＋H₂O, 其所需活化能为167.17 kJ/mol.     

吡喃葡萄糖热解机理的量子化学理论研究

采用密度泛函理论方法 B3LYP/6-31G++(d,p),对纤维素的一个循环单体β-D-吡喃葡萄糖的热解反应机理进行了量子化学理论研究。设计了四种可能的热解反应途径,对各种反应的反应物、产物、中间体和过渡态的结构进行了能量梯度全优化,计算了各热解反应途径的标准动力学参数。计算结果表明,反应路径1中速控步的活化能为297.02 kJ.mol,反应路径2中速控步的活化能为284.49 kJ.mol,与反应路径3,4相比,反应路径1,2的反应能垒更低,是主要的热解反应通道,乙醇醛、1-羟基-2-丙酮、5-羟甲基糠醛、CO等小分子产物是热解的主要产物。这与相关实验结果分析是一致的。     

ClONO2与Cl(2P3/2)的反应机理

在密度泛函理论B3LYP/6-31G^*水平上,研究了ClONO₂+Cl(²P_3/2)Cl₂+NO₃和ClONO₂+Cl(²P_3/2)ClO+ClONO(cis)及ClONO₂+Cl(²P_3/2)ClOCl+NO₂的反应机理.计算得到各可能反应途径的过渡态,并经过内禀反应坐标(IRC)分析加以证实.反应ClONO₂+Cl(²P_3/2)Cl₂+NO₃反应活化能垒最低,为4.5kJ/mol,是反应主通道.     

左旋葡聚糖热解机理的密度泛函理论研究

采用密度泛函理论B3LYP/6-31++G(d,p)方法,对纤维素热解的主要产物左旋葡聚糖的热解反应机理进行了理论计算分析,设计了四种可能的热解反应途径, 对各种反应的反应物、产物和过渡态的结构进行了能量梯度全优化。计算结果表明,左旋葡聚糖开环成链状中间体时,首先,左旋葡聚糖中的两个半缩醛键C(1)-O(7)和C(6)-O(8)断裂,经过渡态TS₁形成中间体IM₁,同时,C(6)-O(7)结合成键使C(5)-C(6)-O(7)形成环状结构,该反应的能垒较高,为296.53 kJ/mol,然后IM₁经过渡态TS₂转变为中间体IM₂,该反应的能垒为234.09 kJ/mol;对IM₂设计了四条可能的反应路径,反应路径2和3能垒较低,是IM₂最可能的热解反应途径;在反应路径1和4中都包含了脱羰基反应,其反应能垒较高,不易发生。     

CH3SH与H2O2气相反应机理的理论研究

采用密度泛函理论的B3LYP方法, 在6-311＋G(d,p)基组水平上研究了CH₃SH与H₂O₂的微观反应机理, 全参数优化了反应势能面上各驻点的几何构型, 振动分析和内禀反应坐标(IRC)分析结果证实了中间体和过渡态的真实性, 计算所得的键鞍点电荷密度的变化情况也确认了反应过程. 结果表明, 反应共分三大步进行, 包含两条反应通道, 第二步由IM1到CH₃SO₂H的反应为决速步骤, 其中的第一条通道是主要反应通道, 相应活化能为157.3和109.7 kJ/mol.     

木质素模化物紫丁香酚热解机理的量子化学研究

采用密度泛函理论方法B3LYP/6-31G++(d,p),对木质素模化物紫丁香酚的热解反应机理进行了量子化学理论研究。提出了三种可能的热解反应途径,对各种反应的反应物、产物、中间体和过渡态的结构进行了能量梯度全优化。计算了各热解反应途径的标准动力学参数,分析了各种主要热解产物的形成演化机理。键离解能计算结果表明,紫丁香酚中CH₃-O键的键离解能最小,各种键离解能的大小顺序为CH₃-O < O-H < CH₃O-C_aromatic < CH₂-H < HO-C_aromatic < C_aromatic-H。在反应路径(1)中,主要热解产物是3-甲氧基邻苯二酚,其形成反应的总能垒为366.6 kJ/mol;在反应路径(2)中主要热解产物是2-甲氧基-6-甲基苯酚,其形成反应的总能垒为474.8 kJ/mol;在反应路径(3)中形成邻甲氧基苯酚的总能垒很低,为21.4 kJ/mol,这表明,在连接甲氧基的碳原子上加氢后能够有效地降低木质素芳环模化物紫丁香酚去甲氧基反应的反应能垒。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.