膜/液界面浓度极化现象的介电解析

对由强、弱荷电膜和溶液构成的膜／液非均匀体系，在10－107Hz频率范围进行了介电测量，在直流偏压下，该体系显示了二个显著的介电弛豫．利用具有电导率分布相，即浓度极化相的介电理论对强行电的离子交换膜的结果进行了介电解析，从实验上测得的介电参数求出了反映膜／液界面浓度极化层构造的参数，讨论了该体系产生介电弛像的原因、说明了介电理论的合理性，并提出了膜／液界面体系产生介电弛豫现象的可能机理．     

自组装膜技术在电分析化学中的研究与应用

本文对自组膜（ＳＡＭｓ）在电分析化学中的研究和应用进行了比较全面的综述。ＳＡＭｓ是单分子膜化学修饰电极发展的最高形式，本文着重阐述了硫醇／金单分子层自组膜在微电极、生物电化学和生物传感器、液相色谱电化学、电催化、光谱电化学等电分析化学研究领域中的应用，并进行了展望。     

压电-红外光谱-电化学联用技术研究邻氨基苯酚聚合过程及其膜的性质

建立了一种现场压电传感-红外反射光谱-电化学三维联用技术,并应用该技术现场监测了聚邻氨基苯酚在金电极上的沉积过程,研究了邻氨基苯酚的电氧化和电聚合性质以及聚邻氨基苯酚聚合膜在酸性介质中的电化学性质,同步获取并讨论了聚合膜质量、离子掺杂行为和聚合膜的化学结构变化等信息。结果表明,该技术有望广泛用于多种电极表面过程研究。     

冠醚修饰的固体支撑双层类脂膜的形成及性能研究

用饱和了胆固醇和饰用冠醚的角鲨烷／氯仿溶液作成膜液，制备了冠醚修饰的固体支撑双层类脂分子膜。重点考察了成膜物种及技术对膜稳定性及电特生影响。其膜电势随接触水相中的变化呈现Ｎｅｒｎｓｔ响应，线性范围１０＾－４－１０＾－１ｍｏｌ／Ｌ。     

金属核心/高聚物膜复合悬浮相电流变流体材料

针对电流变流体悬浮相材料的开发与研究,根据介质极化原理,设计开发了金属核心/高聚物膜复合悬浮相电流变流体材料,在乳液聚合与微胶囊包覆技术的基础上,制备出了金属核心/高聚物膜复合颗粒.并对这种金属核心/高聚物膜复合颗粒的电流变流体性能进行了测试与研究.从理论和实验上都说明了金属核心/高聚物膜复合悬浮相材料在改善电流变流体力学性能及稳定性方面具有潜力,是可以进一步提高与改进的电流变流体材料.     

聚酰亚胺LB膜研究进展

聚酰亚胺（ＰＩ）是一种高性能聚合物材料，通过Ｌａｎｇｍｕｉｒ－Ｂｌｏｄｇｅｔｔ膜（ＬＢ膜）技术实现ＰＩ分子排列的有序化，可以使ＰＩ的某些性能更充分体出现来，详细总结了ＰＩＬＢ膜的制备方法，对其在气体分离，光敏性，液晶取向，介电以及光电导等方面性质的研究现状进行了较为全面的综合，对ＰＩＬＢ的研究和应用前景作了简要展望。     

纳米金属多层膜与多层纳米线的电化学制备及其表征

分别采用单槽法和双槽法电沉积Cu/Co多层膜.研究了两种电沉积方法制备多层膜的工艺条件,利用电化学方法、XRD和SEM对多层膜进行表征,并对Cu/Co多层膜的巨磁阻性能进行了测试. 采用电沉积多层膜的方法，以多孔铝阳极氧化膜（AAO）为模板,在纳米孔内沉积Cu/Co多层线,采用TEM对多层纳米线进行了表征.     

环取代基对金属化聚苯胺衍生物膜修饰电极性能的影响

通过比较聚2，5－二甲氧基苯胺（PDMAn）、聚邻甲基苯胺（POT）和聚间氯苯胺（PmClAn）膜修饰电极的氧化还原电位、沉积在这3种聚合物上的铂微粒的表面形态与晶面取向以及异丙醇在分散Pt微粒的聚苯胺膜修饰电极上的氧化行为，从电子效应和立体效应探讨了聚合物电化学性质与环取代基的关系以及不同聚合基质对Pt沉积机理和有催化性能的影响,结果表明，在硫酸溶液中PDMAn膜修饰电极的氧化还原电位最负、POT次之、PmClAn最正，Pt在PDMAn和POT膜上的电沉积机理与在PmClAn膜上的不同，聚合物膜上沉积的Pt微粒呈现（200)晶面择优取向，其中POT膜上择优取向度最大，PDMAn次之，Pm-ClAn最小，异丙醇在金属化聚合物膜电极上的氧化电位取决于聚苯胺的本质，在POT膜修饰电极上异丙醇的电氧化主要发生在POT的活性电位区，而在PDMAn与PmClAn膜上的电氧化则主要发生在Pt上的氧化电位区，说明聚合物膜不仅作为Pt微粒的分散介质，而且本身有产生催化作用。     

铂微粒弥散的聚2，5－二甲氧基苯胺膜电极在甲醇电氧化中的催化行为

研究了电化学方法制备的铂微粒弥散的聚２，５－二甲氧基苯胺膜电极对甲醇电氧化的催化行为以及影响催化活性的主要因素。以ＸＰＳ、ＳＥＭ表征了这种电极材料的表面结构，结果表明，在酸性介质中，该膜电极对甲醇电氧化有高的催化活性和稳定性。     

铂微粒弥散的聚2,5—二甲氧基苯胺膜电极在甲醇电氧化中的催经行为

研究了电化学方法制备的铂微粒弥散的聚２，５－二甲氧基苯胺膜电极对甲醇电氧化的摧化行为以及影响催化活性的主要因素，以ＸＰＳ、ＳＥＭ表征了这种电极材料的表面结构。结果表明，在酸性介质中，该膜电极对甲醇电氧化有高的催化活性和稳定性。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.