碳酸氢铵与氯化钇反应及结晶产物的组成和晶相类型

The relationships of crystal type, crystallization speed, purity, grain size and shape of rare earth carbonate with precipitation and crystallization conditions are very important for the production of rare earth carbonate with high efficiency, high quality and low cost. It is necessary for us for further understand the crystallization process mechanism and the factors effect on the crystallization. In the present paper, the crystallization characteristic, composition and crystal phase type of yttrium carbonates or ammonium yttrium carbonates precipitated from yttrium chloride solution using ammonium bicarbonate as precipitant were determined by chemical analysis, X-ray powder diffraction and the pH situ-determination. It was found that the crystal phase type was dominated by the feed molar ratio of ammonium bicarbonate to yttrium chloride, and the crystallization speed and the crystal composition were also influenced by temperature, feed manner and aging period etc. When precipitating and aging under lower temperature, crystallization is easy to take place in the high feed molar ratio zone, and when increasing tempera-ture, crystallization will take place both in lower and higher feed molar ratio zones. The results show that spherical yttrium carbonate with tengerite type crystal phase can be formed within the temperature 30～70℃ when feed molar ratio of ammonium bicarbonate to yttrium chloride is less than 4, and that a rhombus flake crystal, which possesses the composition of ammonium yttrium quasi-double carbonate and a new XRD pattern, is formed when the feed molar ratio is over 4. Their compositions can be represented as (NH₄)_aY(CO₃)_b(OH)_c·nH₂O, a< 1, 1< b< 2, c=3+a-2b. A fine crystal of ammonium yttrium double carbonate with the formula of (NH₄)Y(CO₃)₂·H₂O can also be obtained as using an enough amount of ammonium bicarbonate and aging enough time.     

镧石型碳酸钕的形成及晶种对结晶的促进作用

The characteristics of pH value variation during aging process of amorphous neodymium carbonate formed by three different feeding manners have been investigated. The promotion action of seeding on the crystallization of neodymium carbonate is discussed. X-ray diffraction pattern and the elemental analysis results show that neodymium carbonate can transfer from amorphous to crystalline normal neodymium carbonate Nd₂(CO₃)₃·8H₂O with lanthanide structure at room temperature. Its crystallization activity zone lies in lower feeding ratio area expressed by n_NH4HCO3/n_NdCl3 between 2～3. The existing of seeds can shorten crystalline time, from more than 15 h without seed to 2 h with seeds under normal feeding manner. And the spontaneity nucleation time can be shortened further when feeding with multi-steps normal manner. However, whether multi-steps normal or synchronously and continuously feeding manner, the precipitate formed can transfer to crystalline neodymium carbonate directly under seeding. At the same time, it is observed that the variation of pH value reduces with the decrease of feeding amount and the shortening of aging period, indicating that with synchronously and continuously feeding manner can not only realize fast crystallization, but also control pH value within a narrow range, which is beneficial for the producing of neodymium carbonate crystal with narrow-distributed particle size and monitoring of its crystallization process.     

结晶碳酸钕的水热合成、外观形貌及其组成

Crystalline neodymium carbonates were prepared by treating the amorphous precipitate formed from the reaction between neodymium chloride and ammonium bicarbonate under hydrothermal condition. Their composition, morphology and crystal phase were identified by means of elemental analysis, SEM and XRD. It was found that Nd₂(CO₃)₃·2.5H₂O with tengerite-type structure and sheet morphology was obtained when the feed molar ratio(FMR=n_(NH4)2CO2/n_NdCl3)was 2 or 1.8 and hydrothermally treated at 150 ℃ for 12h. However, orthogonal NdOHCO₃ particles agglomerated with long rod crystals were formed when lowering FMR to 1.5 under the same hydrothermal condition. Phase transformation from tengerite-type Nd₂(CO₃)₃·2.5H₂O to orthogonal NdOHCO₃ was occurred when increasing hydrothermal temperature or prolonging hydrothermal time, which is beneficial to the preparation of neodymium hydroxyl-carbonate with neodymium oxide content higher than 70%.     

含氟体系中DDR型分子筛的合成

DDR (Deca-dodecasil 3R) zeolite was synthesized hydrothermally in fluoride medium. The effects of synthesis conditions including the amount of KF, different fluoride sources and seeds on crystallization of DDR zeolite were investigated. The as-synthesized DDR zeolite samples were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). The results demonstrated that DDR crystallization was strongly affected by n_KF/n_SiO2, fluoride sources and seeds. Pure DDR zeolite could be successfully obtained in n_KF/n_SiO2 range of 0.5～1 after 9 days of hydrothermal synthesis. The synthesis time was reduced to 1 day by adding small amount of seeds with yield approaching 100%.     

PVP为模板控制合成球形碳酸钙

Spherical calcium carbonate was prepared by the reaction of sodium carbonate with calcium chloride at the presence of a protein-like molecule， polyvinylpyrrolidone， as the template. The products were characterized by elemental analyses， XRD， SEM， and TG-DSC respectively. The effects of polyvinylpyrrolidone on the crystal form and morphology of the as-prepared CaCO₃ were investigated. It was found that the aggregative shape of the produced calcium carbonate crystalline could be well controlled by adjusting the concentration of the polyvinylpyrrolidone template. This may be of important meanings to the biomimetic synthesis of novel inorganic materials.     

Miscibility and isothermal crystallization of poly(L-lactide) and poly(trimethylene carbonate) blends

Miscibility, isothermal crystallization kinetics, and morphology of poly(L-lactide)/poly(trimethylene carbonate)(PLLA/PTMC) crystalline/amorphous blends were studied by differential scanning calorimetry(DSC) and optical microscopy(OM). The heterogeneity of OM images and an unchanged glass transition temperature showed that PLLA was immiscible with PTMC. During isothermal crystallization, the crystallization rate of PLLA improved when the PTMC content was low(≤ 20%). However, when the PTMC content was high(≥ 30%), the crystallization rate decreased significantly. The reason of these nonlinear changes in crystal kinetics was analyzed according to the nucleation and growth process by virtue of a microscope heating stage. The isothermal crystallization morphologies of the blends were also studied by polarized optical microscopy and the results confirmed the conclusions obtained from crystallization kinetics.     

Crystalline Morphology and Crystallization Kinetics of Melt-miscible Crystalline/Crystalline Polymer Blends of Poly（vinylidene fluoride） and Poly（butylene succinate-co-24mol% hexamethylene succinate）

Poly（vinylidene fluoride） （PVDF） and poly（butylene succinate-co-24 mol% hexamethylene succinate） （PBHS）, both crystalline polymers, formed melt-miscible crystalline/crystalline polymer blends. Both the characteristic diffraction peaks and nonisothermal melt crystallization peak of each component were found in the blends, indicating that PVDF and PBHS crystallized separately. The crystalline morphology and crystallization kinetics of each component were studied under different crystallization conditions for the PVDF/PBHS blends. Both the spherulitic growth rates and overall isothermal melt crystallization rates of blended PVDF decreased with increasing the PBHS composition and were lower than those of neat PVDF, when the crystallization temperature was above the melting point of PBHS component. The crystallization mechanism of neat and blended PVDF remained unchanged, despite changes of blend composition and crystallization temperature. The crystallization kinetics and crystalline morphology of neat and blended PBHS were further studied, when the crystallization temperature was below the melting point of PBHS component. Relative to neat PBHS, the overall crystallization rates of the blended PBHS first increased and then decreased with increasing the PVDF content in the blends, indicating that the preexisting PVDF crystals may show different effects on the nucleation and crystal growth of PBHS component in the crystalline/crystalline polymer blends.     

掺钇锆酸锶-TiO2复合光催化剂的制备及性能研究

SrZrO₃ particles were prepared by a co-precipitation method and Sr(Zr_1-xY_x)O_3-δ -TiO₂ composite particles were then synthesized by Sr(Zr_1-xY_x)O_3-δ and titanium dioxide. The composite particles were characterized by XRD, SEM, FTIR and TG-DTA techniques. The photocatalytic degradation of methylene blue (MB) in aqueous solution was used as a probe reaction to evaluate the photocatalytic activity of the composite particles. The effect of the preparation method for SrZrO₃, doping content of yttrium and TiO₂ amount in the composite particles on the photocatalytic activity of composite particles was also discussed. The results show that the methylene blue solution could be completely degraded by Sr(Zr_1-xY_x)O_3-δ -TiO₂ composite particles under UV-light or visible light irradiation. The photocatalytic activity of composite particles was higher than that of pure TiO₂. The fast recombination of photogenerated electrons and holes were restrained by the heterojunction formed in composite particles. The particle of SrZrO₃ prepared by co-precipitation was small, and the photocatalytic activity of composite particles prepared from this kind of SrZrO₃ was higher than that of particles prepared by solid sintering method. The best doping content of yttrium is 5%. The optimal content of TiO₂ in composite particles is 90wt%, 70wt%, respectively under UV-light and visible light irradiation, the degradation rates of MB are 98.8% and 93.5% , respectively after 50 min irradiation.     

球形Gd2O3∶Eu纳米发光材料的制备

Spherical nanometer Gd₂O₃∶Eu luminescent materials were prepared by homogeneous precipitation method, and the properties were studied also. TG, FTIR and XRD analysis showed that the precursor was carbonate, the cubic Gd₂O₃was obtained after calcination. TEM photographs indicated that the samples were spherical and well dispersed with nanometer and submicrometer size of 200～300 nm which is the nanoparticles’ aggregate. The mechanics of agglomerating growth is also discussed. ED photograph showed that the particle was crystalline. The PL analysis exhibited that CTB band of nanometer Gd₂O₃∶Eu was of 17 nm red shift to bulk materials, and the emission peak was broadened due to the surface and interface effect of nanocrystals.     

反相微乳液法合成SrTiO3纳米棒

SrTiO₃ nanorods were synthesized in cetanyl trimethyl ammonium bromide (CTAB) reverse microemulsion containing CTAB, n-hexanol, n-octane and water with Ba(OH)₂ as reactants. The effects of different conditions such as ω₀ [ω₀=n_H2O/ n_CTAB], aging time and the concentration of reactants on the formation of the nanorods were studied. Transmission electron microscope (TEM), electron diffraction (ED) and X-ray diffraction(XRD)were used to characterize the morphology and the structure of the synthesized nanorods. The results show that SrTiO₃ nanorods with a length of 260～2 000 nm and a diameter of 50～100 nm belonging to single crystal are single cubic system. The molar ratio of Sr to Ti of products is 1.0 as determinded by ICP.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

解决能源问题的新途径——光解水制氢的研究

面对日益枯竭的能源危机,氢能是一种洁净、最有前景的替代能源。目前在各种制氢的方法中光催化分解水制氢的研究最多,光解水过程中催化剂最关键,本文对利用太阳能光解水的途径、提高光催化反应效率以及光催化剂的开发研究进行了综述。     

黄酮化合物的合成研究进展

黄酮化合物是一类具有多种生物活性的天然产物,其经典的合成方法主要为查耳酮路线和β-丙二酮路线.近年来出现了许多新技术、新方法.本文介绍了2'-羟基查尔酮的氧化关环法、黄烷酮氧化法、改进的Baker-Venkataraman法及其他合成黄酮化合物的方法.