三联吡啶钌超分子包合物及其SiO2复合纳米粒的电化学发光信号放大

利用环糊精类物质能够形成超分子包合物的性质,研究了电中性的β-环糊精（β-CD）和负电性的羧甲基-β-环糊精（CM-β-CD）与电化学发光（ECL）活性物质三联吡啶钌（Ru（bpy）₃²⁺）形成超分子包合物的能力及其对ECL的增强作用。结果表明：形成的超分子包合物能够增强Ru（bpy）₃²⁺的ECL,其中CM-β-CD具有更强的增强作用。相对于Ru（bpy）₃²⁺,CM-β-CD增强了1.42倍,而β-CD仅为1.28倍。以制备的表面电荷为负的SiO₂纳米粒为载体,考察了其对Ru（bpy）₃²⁺超分子包合物的吸附能力。结果表明,与Ru（bpy）₃²⁺的CM-β-CD超分子包合物相比,SiO₂纳米粒载体对Ru（bpy）₃²⁺的β-CD 超分子包合物表现出了更强的吸附能力。制备了ECL信号放大能力最强的β-CD-Ru（bpy）₃²⁺超分子包合物的SiO₂复合纳米粒。     

染料敏化TiO2/WO3薄膜电池的光电变色

用光电化学方法研究了染料Ru(П) (4, 4′di COOEt 2, 2′bpy)2 (2, 2′bpy 4, 4′di CONH L tyrosineethylester) (PF6)2 (简写为Ru4)敏化TiO2 纳米结构电极的光电转换过程,同时,在导电玻璃上电沉积得到WO3 薄膜.结果表明,染料敏化的TiO2 多孔膜具有光电转换性能, WO3 薄膜具有良好的电致变色效应,将前者与电沉积得到的WO3 薄膜组成电池,在白光照射下可产生显著的颜色变化,有望用于自供电源的电色灵巧窗(Self poweredsmartwindow).     

DNA介导复合膜中[Ru(bpy)3]2+与Cu(Ⅱ)间光诱导电子转移

由于DNA与[Ru(bpy)₃]2+(bpy=2,2′-联吡啶)及Cu2+间的静电作用,用自铸膜法在铟锡氧化物(ITO)上制备了橙红色[Ru(bpy)₃]2+-DNA-Cu2+复合膜,并应用稳态和暂态荧光光谱、紫外可见光谱、荧光显微镜和扫描电镜对复合膜进行了表征和DNA介导的光诱导电子转移(PET)研究。结果表明,[Ru(bpy)₃]2+-DNA-Cu2+复合膜(摩尔比为10∶20∶1)呈现了明显的吸收特征峰(450 nm)和发射峰(λ_em=595 nm),发光呈单指数衰减,发光寿命为188.6 ns,Cu2+通过DNA介导PET机制猝灭[Ru(bpy)₃]2+发光,猝灭常数为6.94×103 L·mol-1,猝灭速率常数为3.80×1010 L·mol-1·s-1;复合膜中Cu2+摩尔比(10倍)的增大使发射峰蓝移了11 nm,吸收和发射强度衰减至消失,Cu2+通过静态猝灭机制削弱[Ru(bpy)₃]2+发光。此外,对比于溶液和复合膜中Cu2+对[Ru(bpy)₂(tatp)]2+-DNA(tatp=1,4,8,9-四氮三苯)的发光调控,Cu2+仅能因静电作用猝灭复合膜中[Ru(bpy)₃]2+的发光。     

两种钌配合物皮秒发光动力学过程研究

采用稳态发光光谱、瞬态发光动力学测量等手段,对两种钉配合物[Ru(bpy)3](ClO4)2和[Ru(bpy)2 HPIP](ClO4)2的发光性质进行了研究.稳态发光光谱表明[Ru(bpy)2 HPIP](ClO4)2发光明显偏弱;皮秒瞬态发光动力学测量显示[Ru(bpy)2 HPIP](ClO4)2的激发态弛豫过程...     

KCl对含有纳米银的[Ru(bpy)3]2+荧光性能影响

通过吸收光谱、荧光光谱等手段研究了KCl对含有纳米银的金属钌联吡啶配合物([Ru(bpy)3]2 )的荧光性能的影响.结果表明,KCl与纳米银粒子间存在较强的相互作用,这种强的相互作用破坏了[Ru(bpy)3]2 与纳米银粒子间的链状网络结构,形成大颗粒和团聚体.同时,在吸收光谱的长波段处观察到明显的新的吸收带,随着KCl量的增加,新吸收带峰值逐渐红移并展宽.随着KCl量的增加,[Ru(bpy)3]2 荧光强度先猝灭而后逐渐增强,直至达到一个定值.文章从分子间的相互作用、能量传递等方面探讨了KCl对含有纳米银的[Ru(bpy)3]2 荧光性能影响机理.     

聚电解质包覆的铕(Ⅲ)配合物@SiO2荧光纳米粒的合成与性质

以二苯甲酰甲烷(DBM)、邻菲罗琳(phen)和丙烯酸(AA)为配体,制备了铕的配合物Eu(Ⅲ)(DBM)2-(phen)(AA).利用St(o)ber法合成了SiO2纳米粒.通过超声辅助,将脂溶性的强荧光铕配合物吸附到SiO2纳米粒上,再包覆阳离子聚电解质聚二烯丙基二甲基氯化铵(PDAC)和阴离子聚电解质聚丙烯酸(P...     

基于信号增强的电化学发光适配体传感器检测三磷酸腺苷

基于三磷酸腺苷(ATP)适配体与ATP分子作用后可以显著增强电化学发光信号的性能,研究了一种用于ATP含量检测的电化学发光适配体(ECL-aptamer)传感器。通过电沉积方法获得纳米金电极。3′端标记联吡啶钌发光分子的探针DNA通过5′端修饰的巯基自组装到纳米金电极表面,然后与5′端标记二茂铁分子的ATP核酸适配体互补杂交,形成刚性线形的双链DNA,由此构建的传感器产生较弱的电化学发光(ECL)信号。该传感器在ATP溶液中孵化后,由于ATP分子与ATP适配体强的特异性结合,使得适配体分子与探针DNA分子解离,从电极表面脱落进入溶液,此时电极表面的探针DNA在强电解质溶液中可以形成发卡型的茎环结构,产生显著增强的ECL信号。ECL信号强度与ATP浓度的对数值呈线性关系,线性范围为10.0～1.0×10~5 pmol/L,相关系数r=0.995 9,检测限为5.0 pmol/L。该传感器的灵敏度与检测范围高于目前已报道的结果,显示出了ATP检测的应用潜力。     

4种钌配合物室温和低温条件下发光机理的比较研究

以4种钌配合物[Ru(bpy)3]2+,[Ru(bpy)2HPIP]2+,[Ru(dmb)2PIP]2+,[Ru(dmb)2DMNP]2+为研究对象,采用时间分辨的光谱技术分别测量了这4种钌配合物在室温和低温情况下的稳态发光光谱及瞬态发光动力学过程。结果表明,4种样品在低温条件下的发光强度较之室温条件均有所增强,光谱形状有明显变化,瞬态发光寿命也均有延长。分析表明,4种钌配合样品在低温条件下从液态介质固化为刚性介质,电子转移情况发生变化,导致低温发光的光谱形状与室温光谱明显不同。同时速度常数窜越系数kts减小,分子振动和热运动降低,从而提高了磷光量子产率,使得发光增强,寿命也相应延长。     

表面等离子激元双增强β-NaYF4:Er3+上转换研究

用共沉淀法制备了_β-NaYF_4∶Er~(3+)纳米颗粒.通过化学还原法、晶种生长法分别制备银纳米立方颗粒及金纳米棒,并将其掺杂到_β-NaYF_4∶2%Er~(3+)纳米颗粒中形成复合体系,利用表面等离子激元增强效应分别实现_β-NaYF_4∶Er~(3+)上转换发光的激发和发射增强.当银纳米立方颗粒掺杂量为60μL时,上转换发光强度整体增强4.0倍;当金纳米棒掺杂量为60μL时,上转换发光强度整体增强7.8倍.在此基础上,将两种贵金属纳米颗粒同时掺杂到_β-NaYF_4∶Er~(3+)纳米颗粒材料中,实现了该材料上转换发光激发和发射双增强,上转换发光强度增强了16.0倍.     

Cy3标记农药核酸适配体表面增强拉曼光谱法特异性检测痕量啶虫脒

将具有拉曼信号的三氢-吲哚菁类(Cy3)染料分子标记农药核酸适配体(Aptamer)制备成拉曼检测试剂(Cy3-aptamer),对痕量啶虫脒进行了特异性的表面增强拉曼光谱法(SERS)检测研究。考虑到胶体的稳定和聚凝作用原理,采用聚丙烯酸钠作为分散剂,使作为SERS检测基底材料的银溶胶带负电荷,获得了良好的稳定性和分散性。由于聚丙烯酸钠分散的银溶胶为负电平衡体系,测试时需采用聚沉剂,使具有较高稳定性的银纳米颗粒团聚,形成SERS增强热点,从而提高SERS检测信号。以SERS信号较弱的啶虫脒为探针,考察了银溶胶中加入不同聚沉剂(NaCl, KCl, NaOH, HNO_3, H_3PO_4, H_2SO_4, HCl)对SERS信号的影响,实验结果表明, H~+作为阳离子和PO■作为阴离子组成的电解质聚沉剂,对于带有一定负电荷σ~-基团分子,具有较好的拉曼增强效应。且通过紫外可见分光光谱,进一步说明了表面电荷性质对SERS的增强信号起决定作用。又由于Cy3-aptamer磷酸骨架上带有大量负电荷,其SERS信号较小。故选择带丰富正电荷的精胺分子以消除Cy3-aptamer磷酸骨架上的负电荷,使Cy3-aptemer更易吸附于银溶胶表面,使其产生较强的SERS光谱。此外,考察选择了精胺与Cy3-aptamer以及Cy3-aptamer与农药啶虫脒的最佳反应结合时间分别为5和20 min。最后,建立了定量检测农药啶虫脒的方法,并对检测机理进行了探讨。研究表明,农药啶虫脒在适配体银溶胶特效探针上于1 392 cm~(-1)处的SERS特征峰面积与水的OH伸缩振动峰面积组成相对拉曼峰面积强度,其相对强度与啶虫脒浓度的对数具有良好的负线性关系,浓度范围为1×10~(-8)～2.5×10~(-7) mol·L~(-1)。将所建立的特效检测啶虫脒的方法用于实际水样的检测,回收率为97.4%～99.4%。结果表明,所提出的聚丙烯酸钠分散及精胺修饰的银溶胶有利于捕获Cy3-aptamer及其Cy3-aptamer与啶虫脒的反应物,提高了方法的灵敏度与可靠性。     

Fabrication of Ru(bpy)3-titanate nanotube nanocomposite and its application as sensitive solid-state electrochemiluminescence sensor material

A novel and facile method for effective immobilization of Ru(bpy)₃²⁺ within titanate nanotubes (TiNTs) and its application as a sensitive solid-state electrochemiluminescence (ECL) sensor material was studied. The process involved the formation of Ru(bpy)₃²⁺-titanate nanotube nanocomposite (Ru-TiNTs) via electrostatic interactions by mixing TiNTs and Ru(bpy)₃(ClO₄)₂ in aqueous medium. Then Ru-TiNTs were attached to the surface of a Pt electrode to form an ECL sensor. Characterization of Ru(bpy)₃²⁺-titanate nanotube nanocomposite was accomplished by transmission electron microscopy, X-ray photoelectron spectrum, and field emission scanning electron microscope. The electrochemistry and ECL behavior of Ru(bpy)₃²⁺ immobilized on TiNTs were studied with tripropylamine as a coreactant. As-prepared Ru-TiNTs exhibited very good stability and Ru(bpy)₃²⁺ species contained showed excellent ECL behavior. Therefore, the as-prepared Ru(bpy)₃²⁺-titanate nanotube nanocomposite exhibited great promise as new luminescent materials for solid-state ECL detection.     

Potential-modulated electrochemiluminescence of a tris(2,2′-bipyridine)ruthenium(II) / lidocaine system under 430 kHz ultrasound irradiation

The electrochemiluminescence (ECL) of tris(2,2′-bipyridine)ruthenium(II) (Ru(bpy)₃²⁺) in the presence of lidocaine was investigated under ultrasound (US) irradiation. The sonoelectrochemical experiments are conducted by indirect irradiation of ultrasound with a piezoelectric transducer operating at 430 kHz. In a supporting electrolyte at pH 11, the Ru(bpy)₃²⁺/lidocaine system gave weak ECL peaks around +1.2 V and +1.45 V, respectively. The ECL signal at +1.2 V was attributed to redox reactions of the oxidative intermediates of Ru(bpy)₃²⁺ and lidocaine, while the signal at +1.45 V was assumed to be caused by an advanced oxidation process due to the generation of hydroxyl radicals (OH) at the electrode surface. In this study, the potential modulation approach is employed in the study of ECL process upon US irradiations because it can suppress the noise components from sonoluminescence effectly and improve the resolution of ECL-potential profiles. It is found ECL signals were greatly enhanced upon US irradiation at the output power of 30 W, however, the relative intensity of ECL signal at +1.2 V was larger than that obtained with a rotating disk electrode even though the mass transport effect is equilvalent. The experiment results suggest that the chemical effect (i.e., generation of OH) by 430 kHz US becomes remarkable in the electrochemical process. Detailed ECL reaction routes under US are proposed in this study.     

Application of Ru(bpy)3 in control and formation of gold surface nanostructure through oxidation-reduction cycling

It was studied that the nanostructure formed on a gold surface via a simple oxidation-reduction cycles (ORC) in 0.1 M KCl containing Ru(bpy)₃²⁺ with different concentrations. Atomic force microscopy (AFM) and energy-dispersed spectroscopy (EDS) were used to characterize the nanostructure formed on the gold surface. Sweep-step voltammetry and corresponding electroluminescence (ECL) response, in situ electrochemical quartz crystal microbalance (EQCM) measurement were used to monitor the ORC procedure. It was found that the surface structure became more uniform in the presence of Ru(bpy)₃²⁺, and the surface roughness was decreasing with the increasing of Ru(bpy)₃²⁺ concentration, suggesting a simple and effective method to control the formation of nanostructure on the gold surface.     

A solid-state electrochemiluminescence biosensing switch for detection of DNA hybridization based on ferrocene-labeled molecular beacon

A solid-state electrochemiluminescence (ECL) biosensing switch incorporating quenching of ECL of ruthenium(II) tris-(bipyridine) (Ru(bpy)₃²⁺) by ferrocene (Fc) has been successfully developed for DNA hybridization detection. The important issue for this biosensing system is based on the ferrocene-labeled molecular beacon (Fc-MB), i.e. using the special Fc-MB to react with the target DNA and then change its structure, resulting in an ECL intensity change. Under the optimal conditions, the difference of ECL intensity before and after the hybridization reaction (ΔI_ECL) was linearly related to the concentration of the complementary sequence in the range of 10 fM-10 pM and the detection limit was down to 1.0 fM.     

Electrogenerated chemiluminescence quenching of Ru(bpy)3 2+ (bpy=2,2′-bipyridine) in the presence of acetaminophen,salicylic acid and their metabolites

Quenching of Ru(bpy) ₃²⁺ (bpy=2,2′-bipyridine) coreactant electrogenerated chemiluminescence (ECL) has been observed in the presence of acetaminophen, salicylic acid and related complexes. However, no quenching is observed with the acetylsalicylic acid. In most instances, quenching is observed with 100-fold excess of quencher (compared to ECL luminophore) with complete quenching observed between 10,000 and 100,000 fold excess. Fluorescence and UV–vis experiments coupled with bulk electrolysis support the formation of benzoquinone products upon electrochemical oxidation. The mechanism of quenching may involve the interaction of the electrochemically generated benzoquinone species with (i) the ^?Ru(bpy)₃²⁺ excited state or (ii) highly energetic coreactant radicals.     

带-NH2的嘧啶环对钌配合物与DNA相互作用的瞬态发光特性的影响

采用时间分辨的发光光谱技术,分别测量了两种新合成的钌配合物[Ru(bpy)2 (dpbpd(NH2)2)]2 和[Ru(phen)2(dpbpd(NH2)2)]2 与小牛胸腺脱氧核糖核酸(ctDNA)相互作用时的瞬态发光动力学过程,并与以往对[Ru(phen)2dppz]2 等的研究结果进行对比,从而研究带-NH2的嘧啶环对配合物与DNA作用动力学过程的影响.结果表明:这两种含有带-NH2的嘧啶环的钌配合物与DNA相互作用时的发光按双指数规律衰减,发光寿命为几十纳秒,比dppz类钌配合物与DNA作用时的发光衰变寿命(几百纳秒)小一个数量级.归因于嘧啶环上的N和-NH2可能与水分子、DNA的碱基对或磷酸骨架形成氢键,从而加快激发态的无辐射弛豫,削弱发射光强,缩短发光寿命.该结论为进一步研究配合物分子与DNA的相互作用的机理提供了一定的依据.     

基于Ru（bpy）3^2＋印刷电极的电致化学发光传感器的研制

利用丝网印刷技术制备了基于Ru(bpy)23 (钌联吡啶)的印刷电极电致化学发光传感器,这种传感器具有制作简单、成本低、重现性好、对草酸盐的响应范围宽、检测限低等优点。详细研究了电极的制作方法以及发光试剂的固定化。在最优条件下,在pH 6.0的0.2 mol.L-1磷酸盐缓冲液中,利用所研制的ECL传感器测定C2O24-,线性响应范围为3.0×10-7~1.0×0-5mol.L-1,检测限为1.2×10-7mol.L-1(S/N=3)。根据同样的原理也可以用来测定其他的成分,如氨基酸,TprA(三丙胺),NAD(烟酰胺腺嘌呤二核苷酸)等物质。同时应该指出的是如果使用丝网印刷机器进行印刷的话,电极的重现性和稳定性还可以进一步提高。     

钌(Ⅱ)配合物与DNA相互作用的瞬态发光特性

以三种新合成的钌配合物[Ru(bpy)₂(7-CH₃-dppz)]²⁺、[Ru(bpy)₂(7-F-dppz)]²⁺、[Ru(phen)₂(7-F-dppz)]²⁺为研究对象,采用时间分辨的荧光光谱技术分别测量了这三种钌配合物与小牛胸腺DNA相互作用时的瞬态荧光动力学过程。结果表明:[Ru(bpy)₂(7-CH₃-dppz)]²⁺的发光寿命最长(约382 ns),而[Ru(bpy)₂(7-F-dppz)]²⁺的发光寿命最短(约65 ns)。分析表明:钌配合物的发光来源于配合物分子中的电荷转移态到基态的辐射跃迁。通过钌配合物与DNA的相互作用,使得配合物激发态分子的无辐射弛豫几率减小,从而导致发光寿命的增加。配合物的分子与DNA相互作用越强,激发态分子的无辐射弛豫几率越小,发光寿命也越长,最终导致高的发光效率。配合物的分子结构对配合物的分子与DNA的相互作用具有重要的影响。