纳滤膜的研究进展

纳滤膜是一种新型分离膜,其截流分子量介于反渗透膜和超滤膜之间,且对无机盐有一定的截流率。国内外纳滤膜制备方法有L-S相转化法、复合法、荷电化法和无机改性等。纳滤膜研究中存在着膜通量小、膜制作成本较高及抗污染性差等问题,因此选择和制备纳滤膜的材料,优化纳滤技术水处理工艺设计,提高纳滤性能,降低制膜成本,减轻膜污染等已成为当今科学研究的重要课题。     

混合基质水处理膜:材料、制备与性能

以反渗透、纳滤为代表的膜技术已广泛应用于海水和苦咸水脱盐等水处理过程。通过将纳米颗粒添加到传统复合膜基质中,可以制备具有高分离性能和耐污染性的新型膜材料。混合基质膜结合了无机材料及有机聚合物各自的优点,是新型水处理膜材料的发展方向。本文综述了添加无机纳米颗粒的混合基质反渗透、纳滤及正渗透膜的研究进展,详细讨论了不同类型纳米材料的性质和功能,分析了表面有机改性对改善纳米材料分散性以及与聚合物基质相容性的作用,探讨了纳米材料添加方式和膜制备方法对膜结构和性能的影响。在此基础上,进一步探究了混合基质膜的成膜及分离机理,归纳了目前研究中存在的主要问题,并对未来水处理膜材料的研发方向提出了建议。     

共轭微孔聚合物膜的制备策略及其分离应用

降低工业分离过程的能耗为缓解全球能源紧缺问题提供了有效途径. 相比传统工业分离技术, 膜分离技术能耗低、经济效益高, 开发高效的膜材料是提升膜分离性能的重要手段. 共轭微孔聚合物(CMP)膜具有刚性永久超微孔道、高孔隙率、孔结构及化学环境可调控、交联骨架稳定性好等优势, 在分离领域具有良好的应用前景. 概述了近年来CMP膜的制备方法并简要对比了其优缺点, 阐述了CMP膜在气体分离、有机溶剂纳滤、离子筛分和手性分离等领域的分离机理和研究进展, 为开发新型具有良好分离性能的CMP膜材料提供研究思路.     

聚电解质层层自组装纳滤膜*

层层自组装技术能够方便地对膜的微观结构和组成进行调控,已在制备复合型纳滤膜方面取得了迅速的发展。本文综述了近年来用于聚电解质层层自组装纳滤膜的制备方法,种类以及影响因素。介绍了静态层层交替沉积、压力驱动自组装和电场强化自组装等三种制备方法;归纳了均聚型、共聚型和有机/无机杂化型等三类用于层层自组装纳滤膜的聚电解质的特点;讨论了聚电解质的荷电性、电荷密度和电离程度等因素对其自组装膜分离性能的影响。总结了聚电解质自组装纳滤膜在水处理和有机溶剂中物质的分离等方面的应用。同时,对提高聚电解质自组装纳滤膜的组装效率,分离性能和发展方向提出了设想和建议。     

基于“可控”表界面工程的聚合物纳滤膜

复合纳滤膜凭借其效率高与能耗低的特点在分离膜领域占据着越来越重要的地位. 但其制备所面临的最大挑战在于如何实现选择性皮层构建过程及结构性能的有效调控.通过"可控"的表界面工程可以实现对界面性质及界面反应速率的调控,从而实现复合纳滤膜的可控制备和性能提升.因此,我们提出通过""可控"聚合-界面沉积"构建选择性皮层以实现复合纳滤膜分离层的创新制备和多功能化、基于"基膜-单体溶液界面构建"调控界面聚合以获得更薄分离层和更优异的纳滤性能.本文总结和评述了基于"可控"表界面工程的聚合物纳滤膜的重要进展,分析了该领域的未来研究方向,旨在为高性能复合纳滤膜的可控制备提供系统的方法学及理论支持.     

纳滤膜对电解质溶液分离特性的理论研究(I): 单一电解质溶液

电解质溶液在纳滤膜中的截留率对于膜法海水淡化和重金属离子的脱除非常重要. 本文假定膜具有狭缝状孔, 采用扩展Nernst-Planck方程、Donnan平衡模型和Gouy-Chapman理论来描述电解质溶液中离子在膜孔内的传递现象. 使用纯水透过系数、膜孔径及膜表面电势来表征纳滤膜的分离特征, 这三个参数可通过Levenberg-Marquardt方法由实验数据关联得到. 本文使用该模型计算了两种商用纳滤膜(NF45和SU200)对1-1型(NaCl, KCl, LiCl), 2-1型(K₂SO₄)和2-2型(MgSO₄)单一电解质溶液的截留率, 并与实验数据进行了比较, 两者吻合较好. 计算结果表明电解质溶液中离子在纳滤膜孔内传递的主要机理是离子的扩散和电迁移, 纳滤膜对电解质溶液中离子的分离效果主要由空间位阻和静电效应决定. 该模型在低浓度时对电解质溶液通过纳滤膜的截留率计算结果较准确, 但对高浓度电解质溶液则偏差较大.     

解读纳滤:一种具有纳米尺度效应的分子分离操作

纳滤膜是20世纪80年代末期发展起来的一种广泛用于液体分离的新型分离膜。早期研究中,先后提出的基于筛分效应的细孔模型,基于静电效应的电荷模型,以及同时考虑上述两种效应的静电位阻模型和道南位阻模型等为人们更好地理解纳滤膜分离机理和指导纳滤膜过程应用发挥了十分重要的作用。然而由于这些具有“疏松型反渗透膜”特点的纳滤膜没有相应的膜性能预测评价软件,使得针对具体应用过程的纳滤膜的大规模标准化应用受到了一定的制约。为此,结合上述模型,根据一些特定实验拟合确定混合盐体系同号离子间的竞争作用和异号离子间的调节作用,提出了一个适于混合盐体系的纳滤膜分离性能评价模型,促进了纳滤膜技术在水处理过程的大规模推广。最近,根据纳滤膜对离子选择性分离性能及其伴随的动电性质的细致而深入的实验研究,发现仅考虑筛分效应和静电效应并不能完全合理地解释纳滤膜的分离性能,且在动电性质的解析上也存在一定缺陷,进而对纳滤膜纳米级孔径引起的特殊效应和溶液体系中复杂相互作用引起的荷电性质变化有了更为深刻的认识和理解,提出并定量分析了离子透过纳滤膜时存在的介电排斥效应。     

纳滤膜对电解质溶液分离特性的理论研究(Ⅰ):单一电解质溶液

电解质溶液在纳滤膜中的截留率对于膜法海水淡化和重金属离子的脱除非常重要.本文假定膜具有狭缝状孔,采用扩展Nernst-Planck方程、Donnan平衡模型和Gouy-Chapman理论来描述电解质溶液中离子在膜孔内的传递现象.使用纯水透过系数、膜孔径及膜表面电势来表征纳滤膜的分离特征,这三个参数可通过Levenberg-Marquardt方法由实验数据关联得到.本文使用该模型计算了两种商用纳滤膜(NF45和SU200)对1-1型(NaCl,KCl,LiCl),2-1型(K2SO4)和2-2型(MgSO4)单一电解质溶液的截留率,并与实验数据进行了比较,两者吻合较好.计算结果表明电解质溶液中离子在纳滤膜孔内传递的主要机理是离子的扩散和电迁移,纳滤膜对电解质溶液中离子的分离效果主要由空间位阻和静电效应决定.该模型在低浓度时对电解质溶液通过纳滤膜的截留率计算结果较准确,但对高浓度电解质溶液则偏差较大.     

石墨烯纳米筛/碳纳米管纳滤膜

<正>近年来,纳滤膜在水质净化、石油化工、生物医药等领域中发挥着越来越重要的作用。单原子层厚的二维材料是构建高性能纳滤膜的理想构筑单元~1。大量研究集中在调控叠层二维材料膜的层间距实现水和离子的精确筛分~2。同时,在二维材料面内构筑纳米孔进行分离也是这些年的研究热点。然而,目前实验研究仅局限于对小面积(微米     

抗污染高分子分离膜研究进展

高分子分离膜已广泛应用于水处理、食品、生物医药等领域。然而,常用的膜材料如聚醚砜(PES)、聚砜(PSf)、聚偏氟乙烯(PVDF)等容易吸附蛋白质和微生物形成膜污染,进而影响膜的性能和使用寿命。膜污染尤其是膜的生物污染成为限制膜广泛应用的主要瓶颈之一。本文从亲水改性、抗菌改性及亲水抗菌双功能改性三方面综述了控制膜污染的研究进展和现状,并对其未来发展方向进行了展望。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.