Keggin型钼钒磷杂多酸催化剂上丙烷选择氧化性能的研究

系统研究了不同数目V⁵⁺取代的钼钒磷杂多酸H_3+nPMo_12－nV_nO₄₀ (n＝0～4)催化剂上丙烷选择氧化反应性能. 通过BET, IR, TPR, 紫外-可见光谱等表征手段对催化剂的理化性质进行了考察, 并对催化剂的结构-性能关系进行了初步关联. 在杂多酸的一级结构中, V⁵⁺对Mo⁶⁺的取代不仅改变了杂多阴离子金属-氧桥的键强以及晶格氧的插入能力, 而且也相应地调变了样品的酸量. 催化剂活性随V⁵⁺取代数量的递增而增强; 适宜数量的V⁵⁺取代提高了含氧酸产物的选择性, 而过量的V⁵⁺取代则导致部分氧化产物的深度氧化. 考察了在Keggin型杂多酸二级结构上引入钒物种的影响, 也即将钒物种(VO)²⁺作为抗衡离子取代部分质子以调变催化剂的结构与性质. 实验表明, 处于一级结构和二级结构[(VO)²⁺抗衡离子]中的V在反应中均可离析出少量V₂O₅物种. 适宜量的(VO)²⁺物种以及离析出来的少量V₂O₅物种可能均对催化剂的性能有贡献. 显然, 钒在不同位置的价态变化以及形态的不同, 会导致催化性能的相应改变.     

NiTi过渡金属团簇的结构和芳香性的理论研究

在B3PW91/6-311+G(d)计算水平上, 计算并讨论了Ni₄Ti₂, [Ni₄Ti₂]²⁺, [Ni₄Ti₂]^2-与Ni₄Ti₄, [Ni₄Ti₄]²⁺, [Ni₄Ti₄]^2-团簇的几何结构和芳香性. 在构型优化过程中得到了Ni₄Ti₂(D_4h), [Ni₄Ti₂]²⁺(D_4h), [Ni₄Ti₂]^2-(D_4h)和Ni₄Ti₄(D_2h)4个稳定构型, 发现当引入上下2个Ti原子后, Ni₄环成为了平面正方形构型. 核无关化学位移(NICS)计算结果表明, Ni₄Ti₂(D_4h)与Ni₄Ti₄(D_2h)的NICS值为正, 而[Ni₄Ti₂]²⁺(D_4h)和[Ni₄Ti₂]^2-(D_4h)的NICS值为负, 且[Ni₄Ti₂]^2-(D_4h)的NICS值更负. 同时还发现, 由s与d轨道参与形成的反磁性环流是引起[Ni₄Ti₂]²⁺(D_4h)和[Ni₄Ti₂]^2-(D_4h)具有较大芳香性的主要原因; 其中Ti原子主要提供d_z²与s轨道, 而Ni原子主要利用其d_z²与d_x²-y²轨道形成正方形环, 它们之间构成了球状的d轨道环流, 且[Ni₄Ti₂]²⁺(D_4h)和[Ni₄Ti₂]^2-(D_4h)中还有非常明显的π轨道环流.     

吸收光谱法研究新型双钼配合物{Mo[S2CN(C2H5)2 4}{MOCl6)}的结构

双钼配合物〔Mo(DTC)₄〕〔MoCl₆〕(其中DTC=S₂CN(C₂H₅)₂)由于它在一个分子中同时包含两个处于不同配位环境中的、表观氧化态都是正五价的钼,即:一个Mo⁵⁺与四个DTC配体构成配位阳离子〔Mo(DTC)₄〕⁺;另一个Mo⁵⁺与氯离子配体构成配位阴离子〔MoCl₆〕^-而独具特色。本文首次发表了它的红外和紫外-可见吸收光谱数据,并通过初步的光谱分析,确定了上述配合物的结构特征。     

类水滑石[CdxMg6-xAl2(OH)16]2+[S·2H2O]2-的合成与表征

用中温水热法合成了类水滑石[Cd_xMg_6-xAl₂(OH)₁₆]²⁺[S·2H₂O]^2-,探讨了pH值、投入Cd²⁺离子的量以及硫化时间等条件对合成的影响,并用XRD、FT-IR、DTA-TG等手段进行了表征,找出了合成层间嵌入S^2-离子的含Cd类水滑石的最佳条件。     

Synthesis and Structure of Binary Copper/Silver-Arsenic Clusters Derived from Zintl Ion As73-

Polyarsenides containing coinage metals,[As₇Cu(PPh₃)]^2-(1)and[M₂As₁₄]^4-(M=Cu,2;Ag,3),were synthesized by reactions of the nominal composition K₃As₇ with Group 11 metal complexes.The possible intermediate,cluster 1,was isolated from the solution phase through subtle changes in reaction conditions in the formation process of complex 2.Hence,we establish the pathway of the bimetallic bridged clusters[Cu₂As₁₄]^4-by the oxidation of the[As₇Cu(PPh₃)]^2-.Quantum chemical calculations reveal the presence of metallophilic interaction in clusters 2 and 3.     

焙烧气氛对二甲醚低温选择氧化MoO3-SnO2催化剂结构及性能的影响

采用共沉淀法制备了Mo/Sn物质的量比为1：3的MoO₃-SnO₂催化剂,考察了焙烧气氛（O₂、air、N₂和H₂）对催化剂结构及二甲醚（DME）低温氧化制甲酸甲酯（MF）性能的影响。结果表明,在O₂中焙烧的催化剂上DME转化率高达25.10%,MF选择性为72.21%,催化剂具有较高的反应活性。而在H₂中焙烧催化剂上DME转化率仅为7.01%,MF选择性为75.82%。不同气氛焙烧催化剂上DME转化率由大到小的顺序：O₂> air> N₂> H₂。采用XRD、Raman、XPS及ESR等对催化剂进行深入表征。结果表明,共沉淀制备Mo1Sn3催化剂中钼物种以高分散MoO_x形式存在。O₂中焙烧催化剂表面Mo=O及存在于Mo-Sn界面处五配位钼氧化物中Mo⁵⁺含量均高于其他三种催化剂,即低聚态MoO_<em>x末端Mo=O可能是反应活性位点之一,五配位钼氧化物中Mo⁵⁺的存在有利于催化剂活性的提高,也有助于MF的生成。结合in suit DRIFTS证实了吸附于Mo⁵⁺上的CH₃O,在催化剂表面Mo=O作用下氧化为HCHO后与另一分子CH₃O耦合为MF。     

丙烷选择氧化制丙烯醛MoVTeO/SiO2催化剂结构与性能研究

考察了MoVTeO/SiO₂系列催化剂对丙烷选择氧化制丙烯醛反应的催化性能,结合XRD,Raman和TPD等表征结果研究了催化剂结构、表面性质与催化性能之间的关系.结果表明,以Mo为主要活性组分的催化剂(MoV_0.2Te_0.1/SiO₂)具有较好的催化性能.在V,Te组分存在下,Mo物种的分散度和MoO₃的可还原性能提高.以表面钼酸盐和多钼酸盐类形态存在的高分散Mo物种有助于提高催化活性,而催化剂较弱的表面酸性对丙烯醛的生成有利.     

铜负载量对LNT催化剂CuO-K2CO3/TiO2结构与性能的影响

采用连续浸渍法制备了一系列非贵金属稀燃NO_x阱(LNT)催化剂CuO-K₂CO₃/TiO₂,考察了Cu负载量对催化剂结构和NO_x储存还原性能的影响.发现8% (w) CuO-K₂CO₃/TiO₂催化剂的催化性能最佳,其对NO_x的储存量达到1.559 mmol·g^-1,对NO_x的还原效率高达99%,且在NO_x还原过程中无副产物N₂O产生.应用粉末X射线衍射(XRD),高分辩透射电子显微镜(HR-TEM), CO₂程序升温脱附(CO₂-TPD),扩展X射线吸收精细结构(EXAFS),氢气程序升温还原(H₂-TPR)和原位漫反射红外光谱(in-situ DRIFTS)等技术详细表征了催化剂的结构.结果表明,不同Cu负载量的催化剂中,铜物种均主要以CuO相存在.铜的负载量直接影响铜物种、钾物种的存在状态,高分散的CuO相与表面K₂CO₃之间存在较强相互作用,这种相互作用不仅有利于NO_x的储存,而且有利于增强催化剂的稳定性. in-situ DRIFTS结果表明, NO_x储存过程中产生的两个负峰(1436和1563 cm^-1)缘于碳酸盐的分解,这间接证明了碳酸盐作为储存介质参与到NO_x储存反应中. EXAFS结果表明,经过15个稀燃/富燃循环测试,催化剂中的CuO相仍保持稳定.基于以上表征结果,提出了CuO和K₂CO₃在催化剂表面的分布模型,并探讨了NO_x储存还原的可能机理.     

碳酸钾催化的铁基氧载体煤催化化学链燃烧

研究了K₂CO₃催化剂及惰性担体对铁基氧载体煤化学链燃烧的影响.实验结果表明,K₂CO₃的添加可明显促进铁基氧载体与煤之间的反应速率,其原因可归结为从氧载体上迁移到煤颗粒上的K₂CO₃对煤-CO₂气化步骤的催化作用(该步骤为整个还原过程的速率控制步骤);由于K₂CO₃本身的促熔效果及加入K₂CO₃后导致的剧烈氧化还原反应,可以发现,K₂CO₃会增大铁基氧载体的烧结;不同惰性担体对铁基氧载体与煤的反应性影响不大,这是由于惰性担体对还原速控步没有影响;K₂CO₃在多循环化学链燃烧过程中依然可以保持一定的催化活性,另外由于催化剂的流失与失活,使得氧载体的反应活性有所下降.     

具有不同电荷和手性的Co(Ⅲ)配合物跨人红细胞膜的动力学研究

研究了4种不同电荷的Co(Ⅲ)金属配合物跨人红细胞膜的动力学,并测定了它们跨人红细胞膜的一级反应动力学速率常数,发现[Co(C₂O₄)₃]^3-的跨膜速率明显高于[Co(en)₃]³⁺,[Co(en)₂(C₂O₄)]⁺和[Co(en)(C₂O₄)₂]^-,后3种配合物的跨膜速率常数随正电荷的减少略有增加,跨膜机制为简单扩散.[Co(C₂O₄)₃]^3-的跨膜速率受阴离子通道抑制剂DIDS明显抑制,抑制率为51.95%,推测其跨膜机制为部分经阴离子通道协同简单扩散过膜.人红细胞摄入L-[Co(C₂O₄)₃]^3-的速率明显大于D-[Co(C₂O₄)₃]^3-,显示了一定的手性选择性.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.