YBCO／CeO2／Si多层膜超导材料的分析电镜研究

在具有ＣｅＯ２隔离层的Ｓｉ基片上获得了较高质量的ＹＢａ２Ｃｕ３Ｏ７－ｘ（ＹＢＣＯ）高温超导薄膜。在零磁场下，７７Ｋ时其临界电流密度达到１×１０６Ａ／ｃｍ２。研究发现，ＹＢＣＯ的（００１）面平行于Ｓｉ基片的（１００）面，而ＣｅＯ２过渡层由许多约４０ｎｍ×１００ｎｍ的细小ＣｅＯ２晶粒组成，其取向呈散乱分布。尽管ＣｅＯ２和Ｓｉ之间的晶格错配很小（约０．４％），ＣｅＯ２却不能在Ｓｉ上外延生长，而ＹＢＣＯ却能在取向凌乱的ＣｅＯ２上形成［００１］择优取向。ＣｅＯ２和Ｓｉ的界面处有一层极薄的过度层。ＹＢＣＯ和ＣｅＯ２界面存在Ｙ２ＢａＣｕＯ５（２１１相）。在ＹＢＣＯ薄膜中观察到有与１２３相混生的２４８相。     

A MICROCALORIMETRIC ADSORPTION STUDY ONSURFACEACIDITYANDBASICITYOFFe┐MgBINARYOXIDES

ＡＭＩＣＲＯＣＡＬＯＲＩＭＥＴＲＩＣＡＤＳＯＲＰＴＩＯＮＳＴＵＤＹＯＮＳＵＲＦＡＣＥＡＣＩＤＩＴＹＡＮＤＢＡＳＩＣＩＴＹＯＦＦｅ┐ＭｇＢＩＮＡＲＹＯＸＩＤＥＳ＊ＳｈｅｎＪｉａｎｙｉ，ＴｕＭａｉ，ＣｈｅｎＹｉ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉｓｔｒｙ...     

Fe—15Cr—4Al—Y合金中的Y—Fe相及其作用

在含０．２％－１．４％Ｙ的Ｆｅ－１５Ｃｒ－４Ａｌ－Ｙ合金中，１－１０μｍ的Ｙ－Ｆｅ相质点弥散分布，其硬度高于ａ相的２倍，组成可用Ｙ２（Ｆｅ７６Ｃｒ１２Ａｌ１１Ｓｉ）１７表示。Ｙ－Ｆｅ相强烈俘获ａ相中的碳原子，使合金在固溶处理状态下的Ｓｎｏｅｋ内耗峰消失，在７００℃下析出碳化物。Ｙ－Ｆｅ相南点通过阻止闰长大而抑制合金的高温脆化，通过俘获碳原子而延缓４７５℃脆性发展。此外，它们还有提高热强性和抗氧化性     

钇对Fe-Cr-Al合金氧化膜粘附性的影响

利用热重分析,扫描电镜及能谱分析等手段研究了合金中弥散分布的Ｙ,Ｙ２Ｏ３及离子注入Ｙ＾＋对Ｆｅ－２３Ｃｒ－５Ａｌ合金１１００℃恒温氧化行为的影响。不含Ｙ的Ｆｅ２３Ｃｒ５Ａｌ合金氧化膜起皱,长时间氧化后冷却过程中膜发生开裂剥落。合金离子注入１＊１０＾１７Ｙ＾＋／ｃｍ＾２后氧化膜粘附性得到了改善。合金中加入弥散的Ｙ或Ｙ２Ｏ３改变了氧化膜形貌,膜平坦致密,不开裂剥落,不含Ｙ的Ｆｅ２３Ｃｒ５Ａｌ合金氧化膜皱褶形貌的形成及膜发生剥落的原因与氧化膜生长机制及合金中Ｓ的界面偏聚有关,Ｙ提高Ｆｅ－Ｃｒ－Ａｌ合金氧化膜粘附性的原因主要在Ｙ易与Ｓ形成稳定的硫化物,从而阻止了Ｓ在膜／合金界面偏聚。Ｙ提高Ａｌ２Ｏ３膜粘附性的原因还在于改变了Ａｌ２Ｏ３膜的生长机制。     

蝶状铁硒簇合物双（μ—p—甲苯硒基）六羰基二铁双膦取代…

测得并解析了２个蝶状铁硒取代衍生物（μ－ｐ－ＭｅＣ６Ｈ４Ｓｅ）２Ｆｅ２（ＣＯ）２（Ｐｈ２ＰＣＨ２ＣＨ２ＰＰｈ２）（Ａ）和（μ－ｐ－ＭｅＣ６Ｈ４Ｓｅ）２Ｆｅ２（ＣＯ）４（ｃｉｓ－Ｐｈ２ＰＣＨ＝ＣＨＰＰＨ２）（Ｂ）的＾１Ｈ－＾１ＨＣＯＳＹ谱和＾１Ｈ－＾１５ＣＣＯＳＹ谱以及Ａ的＾１Ｈ－＾１ＨＮＯＥＳＲ谱，从而进一不确证了它们的结构。     

Pt-Ce/KL和Pt/CeKL沸石重整催化剂的研究

ＳＴＵＤＹＯＦＰｔ┐Ｃｅ／ＫＬＡＮＤＰｔ／ＣｅＫＬＺＥＯＬＩＴＥＲＥＦＯＲＭＩＮＧＣＡＴＡＬＹＳＴＳＬｕＷｅｉｑｉ，ＬｉＦｅｎｇｙｉ（ＩｎｓｔｉｔｕｔｅｏｆＡｐｐｌｉｅｄＣｈｅｍｉｓｔｒｙ，ＮａｎｃｈａｎｇＵｎｉｖｅｒｓｉｔｙ，Ｎａｎｃｈａｎｇ３３０...     

ESR STUDY OF ZrO_2 CATALYST

ＥＳＲＳＴＵＤＹＯＦＺｒＯ＿２ＣＡＴＡＬＹＳＴ￥ＷｅｎＬＩ；ＬｉａｎｇＢｏＦＥＮＧ；ＹｕａｎＱｉＹＩＮ（ＬａｎｚｈｏｕＩｎｓｔｉｔｕｔｅｏｆＣｈｅｍｉｃａｌＰｈｙｓｉｃｓ，ＣｈｉｎｅｓｅＡｃａｄｅｍｙｏｆＳｃｉｅｎｃｅｓ，Ｌａｎｚｈｏｕ７３００００）...     

PHOTOCONDUCTIVITY OF ZINC PHTHALOCYANINE BY C_(60) DOPING

ＰＨＯＴＯＣＯＮＤＵＣＴＩＶＩＴＹＯＦＺＩＮＣＰＨＴＨＡＬＯＣＹＡＮＩＮＥＢＹＣ_（６０）ＤＯＰＩＮＧ￥ＷａｎＸｉＣＨＥＮ；ＺｈｕＤｅＸＵ；ａｎｄＷｅｎＺｈｕＬＩ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉｓｔｒｙａｎｄＤｅｐａｒｔｍｅｎｔｏｆＰｈｙｓｉｃｓ?..     

TAXAYUNTIN G:A NEW TAXOID FROM TAXUS YUNNANENSIS

ＴＡＸＡＹＵＮＴＩＮ Ｇ： Ａ ＮＥＷ ＴＡＸＯＩＤ ＦＲＯＭ ＴＡＸＵＳ ＹＵＮＮＡＮＥＮＳＩＳ￥ＱｉｎＹＵＥ；ＱｉＣｈｅｎｇＦＡＮＧａｎｄＸｉａｏＴｉａｎＬＩＡＮＧ（ＩｎｓｔｉｔｕｔｅｏｆＭａｔｅｒｉａＭｅｄｉｃａ，ＣｈｉｎｅｓｅＡｃａｄｅｍｙｏ?..     

A NOVEL SYNTHETIC METHOD FOR THE CLUSTERS FeCo_2（CO）_9－（RCCR）（R＝MeO_2C，EtO_2C）．X－RAY CRYSTAL STRUCTURE ANALYSES OF THE CLUSTERS FeCo_2（CO）_9（MeO_2CCCCO_2Me）andCo_4（CO）_（10）－（EtO_2CCCCO_2Et）

ＡＮＯＶＥＬＳＹＮＴＨＥＴＩＣＭＥＴＨＯＤＦＯＲＴＨＥＣＬＵＳＴＥＲＳＦｅＣｏ_２（ＣＯ）_９－（ＲＣＣＲ）（Ｒ＝ＭｅＯ_２Ｃ，ＥｔＯ_２Ｃ）．Ｘ－ＲＡＹＣＲＹＳＴＡＬ　ＳＴＲＵＣＴＵＲＥ　ＡＮＡＬＹＳＥＳ　ＯＦ　ＴＨＥ　ＣＬＵＳＴＥＲＳ　ＦｅＣｏ_２（?..     

The grafting of phthalic acid onto polyurethane copolymer and its impact on the surface hydrophilicity,tensile stress,and shape recovery properties

Phthalic acid (PA) was grafted onto polyurethane (PU) in the PA series due to its rigid aromatic structure and carboxyl groups, but PA was simply blended with PU in the control CPA series. The cross-link density and solution viscosity of the PA series notably increased with increasing PA content, and the same parameters of the CPA series did not increase. The maximum tensile stress of the PA series sharply increased due to the chemical cross-linking of the grafted PA, and the tensile strain at break slowly decreased with increasing PA content. The shape recovery of the PA series at 10?°C rapidly increased upon the grafting of PA; however, that of the CPA series decreased with increasing PA content. The hydrophilicity of PU was enhanced by the grafting of PA based on the water contact angle and water vapor permeation results. The low temperature flexibility of the PA series improved more than that of the CPA series under freezing conditions with increasing PA content due to the chemical cross-linking and steric and electrostatic repulsion between PU moieties. Overall, the grafted PA definitely increased the maximum tensile stress, shape recovery, and low temperature flexibility of PU.     

Polarographic determination of Ce(III) and Tm(III) using rare earth-DBF-chlorophosphonazo complex

The electrochemical behaviour of the DBF—chlorophosphonazo (DBF—CPA)—rare earth (RE) complex has been investigated in this paper. A highly sensitive polarographic adsorption wave was found in the RE(III)—DBF—CPA system and a new method for determination of trace total RE(III) has been established. The limit of detection was 1.8 × 10⁻⁸M. The results of determination of the total RE(III) content in Chinese standard reference materials of cast-iron and alloy steel were in good agreement with the certified values. The polarographic adsorptive waves of Ce(III) and Tm(III)—DBF—CPA overlap seriously. In order to improve the selectivity of determination, a non-linear regression model was employed to fit the peak height of the polarographic wave and the concentrations of Ce(III) and Tm(III). The predictive accuracy of this model for simulant mixtures was satisfied.     

铕、铈、钇离子对TiO2催化剂的改性作用

用浸渍法在微米级TiO2中添加Eu,Y,Ce离子，研究了其对微米级TiO2的改性作用。并以DBS的光降解反应为实验模型，比较催化剂的催化活性。与未加修饰的微米级TiO相比，自制的Y／TiO2,Ce/TiO2催化剂对DBS的光催化活性均有很大的提高。     

Sol–gel preparation and characterization of epitaxial Y0.5Ce0.5O1.75 films on biaxially-textured NiW tapes

Journal of Sol-Gel Science and Technology - High-quality Y0.5Ce0.5O1.75 films were prepared on biaxially-textured NiW tapes using sol–gel method. Y0.5Ce0.5O1.75 precursor sol was prepared...     

MnOx/Al2O3/Ce0.45Zr0.45M0.10Oy （M = Mn, Y, La） catalysts used for ethanol catalytic combustion

MnOx/Al2O3/Ce0.45Zr0.45M0.10Oy (M = Mn,Y,La) catalysts were prepared by impregnation method and characterized by BET,TPR and XRD analyses.The catalytic activities toward ethanol combustion were investigated in a microreactor.The results demonstrated that the catalytic activity of MnOx/Al2O3/Ce0.50Zr0.50O2 monolithic catalyst could be improved by doping Mn,Y and La into Ce0.50Zr0.50O2.When doping Y into Ce0.50Zr0.50O2,the catalyst MnOx/Al2O3/Ce0.45Zr0.45Y0.10O1.95 showed the highest activity.The 100% conversion temperature of ethanol was 230 ℃.Furthermore,once the conversion of ethanol started,the complete conversion was quickly achieved.The doping of Mn,Y and La led to better activity for ethanol combustion and lower temperature reduction peaks in TPR profiles.The doping of Mn resulted in enhanced oxygen storage capacity (OSC),larger area of the reduction peaks,and excellent reactivity,and the doping of Y resulted in the lowest reduction temperature and the best activity.     

Ce0.1+xTi0.5-xAl0.2Y0.1La0.1O1.8材料的制备及在三效催化剂中的应用

采用共沉淀法制备了Ce0.1+xTi0.5-xAl0.2Y0.1La0.1O1.8(0≤x≤0.4)材料, 并对所制备的材料进行了X射线衍射(XRD)和X射线光电子能谱(XPS)的表征, 测定了材料的比表面积(BET法)和储氧量(OSC), 同时采用氢气程序升温还原(H2-TPR)和氨气程序升温脱附(NH3-TPD)研究了材料的还原性能和表面酸性. 研究结果表明, Ce/Ti摩尔比大于1∶2的材料能形成立方萤石结构的固溶体, Ce/Ti摩尔比为1时, 材料表面Ce4+/Ce3+摩尔比达到最大; 随着Ce/Ti摩尔比的增大, 材料的储氧能力先增大后减小, 而TPR还原峰温则是先减小后增大, 当Ce/Ti摩尔比为1时, 材料的储氧量达到最大, 为660 μmol/g; 还原峰峰温最低, 为616 ℃. 以制备的材料为载体制备了一系列Pt/Ce0.1+xTi0.5-xAl0.2Y0.1La0.1O1.8三效催化剂, 并对催化剂进行了活性评价. 活性测试结果表明, 以Ce/Ti比为1的载体材料制成的催化剂对C3H8, CO和NO的起燃温度分别为236, 147和228 ℃, 表现出了优异的温度特性.     

钇,铈对低铪镍基K444返回合金组织与力学性能的影响

研究了Y,Ce对含铪(Hf)镍基铸造高温合金K444返回料(添加50%返回料)合金的力学性能和组织的影响.研究结果表明:适量Y,Ce(Y<0.03%,Ce<0.015%(质量分数))添加到返回料合金后,一方面,Y,Ce具有去除N,O等有害杂质的作用,使O含量由15×10~(-6)降低到8×10~(-6),N含量由35×10~(-6)降低到18×10~(-6),从而使返回料合金得到净化.另一方面,Y,Ce细化了枝晶组织,减少了共晶和大块状碳化物数量,并且强化了晶界.和未加Y,Ce的返回料合金相比.添加Y,Ce使返回料合金室温拉伸强度提高约100 MPa,塑性提高近一倍;使900℃的高温瞬时拉伸性能波动较为平稳,塑性提高近一倍.添加Y,Ce还可以提高返回合金900℃/274 MPa条件下的持久性能,达到新料水平;可以明显延长K444返回合金900℃/274 MPa条件下的蠕变第二阶段,提高蠕变寿命.     

Effects of Y (Ⅲ) Ions on the Fluorescence Properties of Ce(Ⅲ) Ion and the Organic Ligands in the Complex

The enhancement effects of Y ( Ⅲ) ions on the fluorescence of Ce ( Ⅲ) in Ce ( Ⅲ)-Y ( Ⅲ)-PMMA (polymethylmethacrylate ) or Ce ( Ⅲ)-Y ( Ⅲ)-PVC (polyvinyl chloride ) complex systems were observed. The influence of Y ( Ⅲ) ions on the emission spectra of PMMA ligands in PMMA-Y ( Ⅲ) and the fluorescent enhance- ment of Y( Ⅲ) on Ce( Ⅲ) emission in PMMA-Ce-Y by Y( Ⅲ) ion were studied. It was also of interest to note that when Y ( Ⅲ) ions were added into PMMA and into bpy(bipyridine ), respectively, the emission spectrum of PMMA ligands was split into fine structure bands by Y ( Ⅲ), and the fluorescence intensities of bpy ligands in bpy-Y ( Ⅲ) complexes were considerably increased.     

氮化镓发光二级管蓝光转换材料的合成和发光性质

合成了Ce3＋掺杂的稀土石榴石结构复合氧化物体系(Y1-xGdx)3Al5O12、(Y1-xLux)3Al5O12、(Y1-xLax)3Al5O12、(Y1-xYbx)3Al5O12和(Y1-xTbx)3Al5O12.重点研究了(Y1-xGdx)3Al5O12:Ce3＋和(Y1-xLux)3Al5O12:Ce3＋两个体系的晶体结构和发光性质.这些体系都具有立方石榴石结构.(Y1-xGdx)3Al5O12:Ce3＋体系随Gd取代Y,晶胞参数略有增加.荧光光谱的发射波长随Gd浓度增加发生红移,当x=0.5时发射波长达到最大值（560 nm）,并不再随Gd含量增加而变化. (Y1-xLux)3Al5O12:Ce3＋的晶胞参数随 Lu取代Y而减小,但均保持了立方石榴石结构.荧光光谱的发射波长随Lu3＋的增加向短波方向移动,Lu3Al5O12:Ce3＋的发射波长的峰值为520 nm,体系的蓝移量是20 nm.利用分离发光中心的位形坐标模型对波长的移动作了定性解释.这两个体系的发射波长的可调节特性,对改善与氮化镓发光二极管(LED)匹配的蓝光转换材料的色坐标、色温等显色性质具有重要意义.     

稀土添加剂对超细ZrO2织构、结构的影响

Pure zirconia and zirconia containing Y or Ce were prepared by Supercritical Drying Method (SCD) followed by calcination in air at temperature up to 700℃. It was found that the zirconia containing Y or Ce possessed much higher specific surface area and larger pore volume than that of pure zirconia. The BET surface area of 3.4Y2O3-96.6ZrO2 without calcination and that calcined at 700℃ were 376.2 m2﹒g-1 and 80.0 m2﹒g-1 respectively, while the corresponding values of pure zirconia were 248.0 m2 ﹒g-1 and 47.8 m2﹒g-1 respectively. It was postulated that the better textural properties of zirconia containing Y or Ce were resulted from preventing zirconia particles sintering in the presence of Y or Ce additive. All of these samples made by SCD had a well-developed mesoporous texture.