分子印迹聚合物微球的制备及应用研究进展

球形分子印迹聚合物具有制备简单、使用方便；分子识别效率高且便于功能设计等优点，近年来成为分子印迹技术领域研究的热点之一。对球形分子印迹聚合物微球的制备及其应用研究进展作了较为详细的介绍。     

Synthesis,characterization, and application of griseofulvin surface molecularly imprinted polymers as the selective solid phase extraction sorbent in rat plasma samples

In present study, an investigation was carried out to develop and validate an analytical method for the selective extraction and determination of griseofulvin (GSF) from plasma samples. For this purpose, a rational approach was made to synthesize and characterize the surface molecularly imprinted polymers (SMIPs). The SMIPs were utilized as solid phase extraction (SPE) sorbents. The SMIPs were prepared by using GSF as template molecule on the surface of modified silica particles through a non-covalent technique. The particles demonstrated high adsorption capacity (119.1 µg/mL), fast adsorption equilibrium time (30 min) and good recognition selectivity for the template drug. The scanning electron microscopy and infrared spectroscopy were used to explain the structural and morphological characteristics of the SMIPs and surface non-imprinted polymers. The SPE method was combined with HPLC for plasma analysis. The method validation results demonstrated that the established method possessed good linearity for GSF ranging from 0.1 to 50 µg/mL (R² = 0.997). The limit of detection for this method was 0.02 µg/mL for rat plasma samples. The recoveries of GSF from spiked plasma samples were (90.7–97.7%) and relative standard deviations were (0.9–4.5%). Moreover, the SMIPs as selective SPE sorbent can be reused more than 8 times which is a clear advantage over commercial SPE sorbents. Finally, the usefulness of the proposed strategy was assessed by extraction and detection of GSF in real rat plasma samples.     

The Syntheses and Characterization of Molecularly Imprinted Polymers for the Controlled Release of Bromhexine

Imprinted polymers are now being increasingly considered for active biomedical uses such as drug delivery. In this work, the use of molecularly imprinted polymers (MIPs) in designing new drug delivery devices was studied. Imprinted polymers were prepared from methacrylic acid (functional monomer), ethylene glycol dimethacrylate (cross-linker), and bromhexine (as a drug template) using bulk polymerization method. The influence of the template/functional monomer proportion and pH on the achievement of MIPs with pore cavities with a high enough affinity for the drug was investigated. The polymeric devices were further characterized by FT-IR, thermogravimetric analysis, scanning electron microscopy, and binding experiments. The imprinted polymers showed a higher affinity for bromhexine and a slower release rate than the non-imprinted polymers. The controlled release of bromhexine from the prepared imprinted polymers was investigated through in vitro dissolution tests by measuring absorbance at λ _max of 310 nm by HPLC-UV. The dissolution media employed were hydrochloric acid at the pH level of 3.0 and phosphate buffers, at pH levels of 6.0 and 8.0, maintained at 37.0 and 25.0 ± 0.5 °C. Results from the analyses showed the ability of MIP polymers to control the release of bromhexine In all cases The imprinted polymers showed a higher affinity for bromhexine and a slower release rate than the non-imprinted polymers. At the pH level of 3.0 and at the temperature of 25 °C, slower release of bromhexine imprinted polymer occurred.     

Molecularly imprinted polymers for 5-fluorouracil release in biological fluids

The aim of this work was to investigate the possibility of employing Molecularly Imprinted Polymers (MIPs) as a controlled release device for 5-fluorouracil (5-FU) in biological fluids, especially gastrointestinal ones, compared to Non Imprinted Polymers (NIPs). MIPs were synthesized using methacrylic acid (MAA) as functional monomer and ethylene glycol dimethacrylate (EGDMA) as crosslinking agent. The capacity of the polymer to recognize and to bind the template selectively in both organic and aqueous media was evaluated. An in vitro release study was performed both in gastrointestinal and in plasma simulating fluids. The imprinted polymers bound much more 5-Fu than the corresponding non-imprinted ones and showed a controlled/sustained drug release, with MIPs release rate being indeed much more sustained than that obtained from NIPs. These polymers represent a potential valid system for drug delivery and this study indicates that the selective binding characteristic of molecularly imprinted polymers is promising for the preparation of novel controlled release drug dosage form.     

Design of an imprinted clean-up method for mycophenolic acid in maize

In the present work, the development of imprinted polymers selective towards mycophenolic acid and their application in food analysis are reported for the first time. To synthesize the molecularly imprinted polymer (MIP) 4-vinylpyridine and ethyleneglycol dimethacrylate were applied as functional monomer and cross-linker, respectively. Besides the toxin itself, the implementation of structural analogues as templates was evaluated. A molecularly imprinted solid-phase extraction (MISPE) procedure was designed for the selective clean-up of maize extracts. Binding experiments and Scatchard analysis indicated the presence of specific binding sites in the imprinted polymers. The imprinting effect varied along with the selected template. The dissociation constant (K(D)) of the higher affinity binding sites ranged from 0.8 μmol/l to 15.6 μmol/l, while the K(D) of the lower affinity binding sites was in the range of 138.5-519.3 μmol/l. The performance of the MIPs throughout the clean-up of spiked maize sample extracts was evaluated and compared with the results obtained when applying a non-imprinted polymer. Depending on the polymers and the spiked concentration, recoveries after MISPE and non-imprinted solid-phase extraction varied respectively from 49% to 84% and from 28% to 31%. The imprinted polymers were superior regarding matrix effect, limit of detection (LOD) and limit of quantification (LOQ). LOD ranged from 0.17 μg/kg to 0.25 μg/kg and LOQ varied from 0.57 μg/kg to 0.82 μg/kg. Analysis of 15 maize samples by liquid chromatography tandem mass spectrometry revealed that the MIPs could be excellent sorbents for clean-up of contaminated food samples.     

Evaluation of a molecularly imprinted polymer for the isolation/enrichment of β-estradiol

The selective preconcentration of estradiol was explored using the recognition ability of a molecularly imprinted polymer (MIP) in the solid phase extraction (SPE) format. Polymeric particles were imprinted with 17β-estradiol using methacrylic acid as functional monomer and divinylbenzene as crosslinker. Binding studies of these polymeric particles towards 17β-estradiol showed selectivity over non-imprinted polymers, using acetonitrile as solvent. The imprinted polymer showed a recovery of 88% for β-estradiol in deionized water and 81% in surface water. The selectivity of the MIP over the non-imprinted polymer was relatively low, only 10% higher recovery. The results indicate that the MIP imprinted with 17β-estradiol does not appear to provide a viable approach to be used in a sample clean-up or enrichment step for the determination of estradiol in aqueous systems.     

Highly selective stir bar coated with dummy molecularly imprinted polymers for trace analysis of bisphenol A in milk

A water compatible molecularly imprinted polymers (MIPs) coated stir bar for bisphenol A(BPA) was prepared with 3,3',5,5'-tetrabromobisphenol A as the dummy template molecule in this study. The dummy molecularly imprinted polymers coated stir bar (DMIPs-SB) showed better selectivity than the bars coated with polydimethylsiloxane or non-imprinted polymers when used to extract BPA and its three analogues. The saturated adsorption amount of the DMIPs coating was 3.0 times over that of the non-imprinted polymers coating. To achieve the optimum extraction performance, several parameters, including extraction and desorption time, pH value, adsorption temperature and stirring speed were investigated. The high-performance liquid chromatography combined with the DMIPs-SB was employed in the analysis of BPA in aqueous solution. The linear range of BPA concentration in aqueous medium was 0.0228-2.28 ng/mL with correlation coefficient of 0.9994 and the detection limit was about 6.84 × 10(-3) ng/mL based on three times ratio of signal to noise. This method was directly applied to the determination of trace BPA in milk with satisfactory results.     

沉淀聚合制备诺氟沙星-Zn2+分子印迹聚合物及其印迹方式的研究

采用沉淀聚合的方式以诺氟沙星(NFA)-Zn2+为模板分子,乙二醇二甲基丙烯酸酯为交联剂,分别选取酸性功能单体甲基丙烯酸与碱性功能单体4-乙烯基吡啶制备了诺氟沙星-Zn2+的分子印迹聚合物.通过紫外光谱研究发现诺氟沙星与Zn2+及两种功能单体均发生了金属配位印迹作用且形成了比例不同的印迹复合物.红外光谱的功能基团的表征结果显示,甲基丙烯酸与诺氟沙星-Zn2+形成了以诱导作用占优的三元配合物,而4-乙烯基吡啶则与诺氟沙星-Zn2+形成了共轭作用占优的三元配合物.扫描电镜及粒径分布实验表征了聚合物的物理特性,结果显示印迹聚合物的表面存在孔及孔道结构而非印迹聚合物的表面较致密不存在孔且制备的印迹聚合物的粒径均在100μm以下,其平均粒径为39μm.等温结合及选择性实验的结果表明4-乙烯基吡啶为功能单体制备的印迹聚合物的选择性识别性能优于甲基丙烯酸为功能单体制备的印迹聚合物,其特异性吸附容量和印迹指数分别为66.84μmol/g和4.207.同时在混合溶液的选择性实验中以4-乙烯基吡啶(4-VP)为功能单体制备的印迹聚合物的选择识别诺氟沙星的能力优于以甲基丙烯酸为功能单体的聚合物,其识别因子分别为3.408和2.909,而非印迹聚合物对底物的吸附量较小且识别因子均接近于1,说明非印迹聚合物对底物的识别为非选择性的.     

溶胶-凝胶法制备的罗丹明B/二氧化钛分子印迹聚合物的结构与吸附性能

以罗丹明B为模板分子,以钛酸丁酯为交联剂,采用溶胶-凝胶法在酸性条件下制备了罗丹明B二氧化钛溶胶-凝胶分子印迹聚合物;利用傅立叶变换红外光谱和透射电镜分析了分子印迹聚合物的结构,使用热重分析测定了其热稳定性,采用静态吸附和动态吸附方法考察了其吸附性能,并与非印迹聚合物进行了对比.结果表明,与非印迹聚合物相比,印迹聚合物具有网络状多孔隙凝胶微结构及对模板分子的特异性识别结合位点,因而对模板分子具有更好的吸附性能和特异选择性.其原因可能在于,模板分子上的羰基与钛酸丁酯水解产生的羟基产生氢键作用,使钛酸围绕于模板分子周围,并通过缩聚形成凝胶;当模板分子洗脱后,孔隙得到保留并形成网络状凝胶,从而能够吸附更多的模板分子.     

Synthesis and chromatographic evaluation of molecularly imprinted polymers prepared by the substructure approach for the class-selective recognition of glucuronides

Two series of molecularly imprinted polymers (MIPs) for the class-selective recognition of glucuronides have been prepared by using lipophilic substructures of the target analyte as template molecule and potent host monomers against oxyanions, that are expected to establish a strong stoichiometric interaction with the single carboxylic group of the template. The polymers were tested as stationary phases in liquid chromatography for specific recognition. A preliminary investigation of the imprinting properties of eleven MIPs was carried out, by comparing the retention time of the template and of structurally related compounds on the MIP column with that on the corresponding non-imprinted polymer (NIP). The two polymers showing the best performance were selected to further test cotinine, mycophenolic acid, testosterone and their respective glucuronides as model compounds. The high specificity obtained against glucuronides and the different chemical structure of the parent drug make the two MIPs class-selective imprinted receptors, also suitable for SPE application.     

琥珀酸氯霉素分子印迹聚合膜的制备及其吸附特性研究

为制备对琥珀酸氯霉素分子具有特异性吸附的分子印迹聚合物膜, 利用模板分子琥珀酸氯霉素(HS-CAP)、功能单体甲基丙烯酸(MA)、交联剂乙二醇二甲基丙烯酸酯(EGDMA)、引发剂偶氮二异丁腈(AIBN)、溶剂四氢呋喃, 采用紫外光引发聚合的方法制备出含有HS-CAP分子印迹位点的印迹聚合微粒, 并使用相转化的方法, 制备含有这种HS-CAP分子印迹微粒的醋酸纤维素膜. 然后通过吸附实验检测该印迹膜的吸附特性, 与非印迹膜相比, 印迹膜对模板分子具有良好的特异性识别作用, 与印迹膜相互作用的模板分子溶液, 在作用前后浓度发生了显著的变化; 印迹膜对模板分子的识别作用主要集中于与模板分子相互作用的最初2 h之内, 并随作用时间的延长而降低; 当模板分子浓度介于0.2～0.0125 mg/mL这一范围内时, 模板分子溶液浓度越高, 印迹膜的吸附特性越明显. 本实验所制备的分子印迹聚合膜对模板分子具有特异性识别能力, 可以在下一步研制以分子印迹聚合膜为基础的检测氯霉素残留的传感设备中得到应用.     

Preparation and characterization of molecularly imprinted polymers based on β‐cyclodextrin‐stabilized Pickering emulsion polymerization for selective recognition of erythromycin from river water and milk

Molecularly imprinted polymers were prepared via β‐cyclodextrin‐stabilized oil‐in‐water Pickering emulsion polymerization for selective recognition and adsorption of erythromycin. The synthesized molecularly imprinted polymers were spherical in shape, with diameters ranging from 20 to 40 µm. The molecularly imprinted polymers showed high adsorption capacity (87.08 mg/g) and adsorption isotherm data fitted well with Langmuir model. Adsorption kinetics study demonstrated that the molecularly imprinted polymers acted in a fast adsorption kinetic pattern and the adsorption features of molecularly imprinted polymers followed a pseudo‐first‐order model. Adsorption selectivity analysis revealed that molecularly imprinted polymers had a much better specificity for erythromycin than that for spiramycin or amoxicillin, and the relative selectivity coefficient values on the bases of spiramycin and amoxicillin were 3.97 and 3.86, respectively. The Molecularly imprinted polymers also showed a satisfactory reusability after four times of regeneration. In addition, molecularly imprinted polymers exhibited good adsorption capacities for erythromycin under complicated environment, that is, river water and milk. These results proved that the as‐prepared molecularly imprinted polymers is a potent absorbent for selective recognition of erythromycin, and therefore it may be a promising candidate for practical applications, such as wastewater treatment and detection of erythromycin residues in food.     

Dummy molecularly imprinted polymers as the coating of stir bar for sorptive extraction of bisphenol A in tap water

A unique stir bar coated with dummy molecularly imprinted polymers for bisphenol A was prepared by sol-gel technique. The scanning electron microscopic image of the coating presented a homogeneous surface with a thickness of about 57 ± 2.5 μm. The Fourier transform infrared spectrum of the coating proved the incorporating of dummy molecularly imprinted polymers with the sol-gel network. When used to extract bisphenol A from aqueous solution containing bisphenol A and its three analogs (4-tert-butylphenol, 4,4'-dihydroxybiphenyl, and 3,3',5,5'-tetrabromo-bisphenol A). Dummy molecularly imprinted polymers-coated stir bar showed better selectivity than the bars coated with polydimethylsiloxane or non-imprinted polymers. The extraction conditions including stirring speed, pH, and extraction time were optimized. After back extraction with methanol, the extracts were analyzed by high-performance liquid chromatography-fluorescence detection. The linear range was 0.0228-0.456 ng/mL with correlation coefficient of 0.9994 and the detection limit was about 5.70 × 10(-3) ng/mL based on three times ratio of signal-to-noise. The method was applied to the determination of trace bisphenol A in tap water.     

Novel molecularly imprinted polymer prepared by nanoattapulgite as matrix for selective solid-phase extraction of diethylstilbestrol

Using nanoattapulgite as matrix, both diethylstilbestrol surface molecularly imprinted polymer and non-imprinted polymer were synthesized in this work. Compared with each other, the diethylstilbestrol surface molecularly imprinted polymer is superior to non-imprinted polymer in adsorption capacity, selectivity and mass transfer property. The maximum static adsorption capacities of diethylstilbestrol surface molecularly imprinted polymer, non-imprinted polymer and nanoattapulgite for diethylstilbestrol was 105.14, 78.54 and 28.50 mg g⁻¹, respectively. As the packing material of solid-phase extraction, the diethylstilbestrol surface molecularly imprinted polymer has been applied to concentrating diethylstilbestrol in pond water and fish samples. A corresponding analytical method to determine diethylstilbestrol has been developed. The limit of detection for diethylstilbestrol in pond water sample and fish samples were 3 μg L⁻¹ and 15 μg kg⁻¹.     

Molecularly imprinted solid-phase extraction of cocaine metabolites from aqueous samples

Cocaine is a well-known drug of abuse which, when ingested nasally or by smoking, undergoes a number of biotransformation and degradation reactions. In the present work, a synthetic analogue of the cocaine metabolite benzoylecgonine was prepared and used as a template molecule in the preparation of a series of molecularly imprinted polymers (MIPs). Molecularly imprinted solid-phase extraction (MISPE) conditions were established under which benzoylecgonine in aqueous samples could be selectively extracted and quantified at clinically relevant concentrations (μg/ml). Under optimised MISPE conditions, recoveries of analyte were high (>70%) and excellent discrimination between imprinted and non-imprinted materials observed.     

分子印迹膜电化学传感器检测土壤中莠去津

本文报道了一种对莠去津有识别特性的分子印迹膜的制备,即在含和不含模板分子(莠去津)的情况下,通过循环伏安技术在金电极表面沉积2-巯基苯并咪唑,制备了2-巯基苯并咪唑聚合膜.利用循环伏安法对印迹和非印迹膜行为进行了评价,对分子印迹膜的影响因素进行了筛选和优化.实验表明,该分子印迹膜对莠去津具有良好的选择性和灵敏度.莠去津的还原峰电流与莠去津的浓度在 1.2 ×10 - 8mal/L～8.0 ×10 - 5mol/ L 范围内具有良好的线性关系( r=0.99862),检出限可达 3.0 ×10 - 9mol/ L.将此传感器用于土壤中莠去津的测定,回收率在90.8% ～ 98.2%之间,取得了很好的结果.     

Cyproterone Synthesis, Recognition and Controlled Release by Molecularly Imprinted Nanoparticle

In this study, we used novel synthetic conditions of precipitation polymerization to obtain nanosized cyproterone molecularly imprinted polymers for application in the design of new drug delivery systems. The scanning electron microscopy images and Brunauer?CEmmett?CTeller analysis showed that molecularly imprinted polymer (MIP) prepared by acetonitrile exhibited particles at the nanoscale with a high degree of monodispersity, specific surface area of 246?m²?g^?1, and pore volume of 1.24?cm³?g^?1. In addition, drug release, binding properties, and dynamic light scattering of molecularly imprinted polymers were studied. Selectivity of MIPs was evaluated by comparing several substances with similar molecular structures to that of cyproterone. Controlled release of cyproterone from nanoparticles was investigated through in vitro dissolution tests and by measuring the absorbance by HPLC-UV. The pH dissolution media employed in controlled release studies were 1.0 at 37?°C for 5?h and then at pH 6.8 using the pH change method. Results show that MIPs have a better ability to control the cyproterone release in a physiological medium compared to the non molecularly imprinted polymers (NMIPs).     

Polyacrylamide gels with electrostatic functional groups for the molecular imprinting of lysozyme

The system of polyacrylamide incorporated with methacrylic acid and 2-(dimethylamino)ethyl methacrylate was studied for the possibility of imprinting of lysozyme. The results show that approximately 27% (w/w) of the lysozyme template was not able to be extracted from the molecularly imprinted acrylamide polymers. The amount of the lysozyme template able to be extracted was increased by the addition of methacrylic acid. The molecularly imprinted polymer (MIP), which was prepared with 0.573 M acrylamide, 0.573 M methacrylic acid and 0.573 M 2-(dimethylamino)ethyl methacrylate at a total solution concentration of 20% (w/w), was able to adsorb 83% more lysozyme than the non-imprinted polymer. Selectivity of MIP was also studied.     

Synthesis and characterization of photo‐responsive magnetic molecularly imprinted microspheres for the detection of sulfonamides in aqueous solution

A dual responsive molecularly imprinted polymer sensitive to both photonic and magnetic stimuli was successfully prepared for the detection of four sulfonamides in aqueous media. The photoresponsive magnetic molecularly imprinted polymer was prepared by surface imprinting polymerization using superparamagnetic Fe₃O₄ nanoparticles functionalized with a silica layer as a support, water‐soluble 4‐[(4‐methacryloyloxy)phenylazo]benzenesulfonic acid as the functional monomer, and sulfadiazine as the template. The magnetic molecularly imprinted polymers showed specific affinity to sulfadiazine and its structural analogs in aqueous media. Upon alternate irradiation at 365 and 440 nm, the quantitative bind and release of the four sulfonamides by magnetic molecularly imprinted polymers occurred. Furthermore, the prepared magnetic molecularly imprinted polymers were used as solid‐phase extraction material selectively extracted the four sulfonamides from water samples with good recoveries. Thus, a simple, convenient, and reliable detection method for sulfonamides in the environment based on responsive magnetic molecularly imprinted polymers was successfully established.     

基于分子印迹膜修饰丝网印刷电极的地西泮电化学传感器

以地西泮为模板分子,采用循环伏安法在一次性丝网印刷电极表面原位电聚合形成聚邻苯二胺膜,洗脱除去模板分子后得到地西泮分子印迹膜修饰丝网印刷电极。利用差示脉冲法对印迹膜和非印迹膜进行评价,表征了电极表面膜的电化学性质。以KI为印迹电极和底液间的探针,建立了一种间接检测地西泮的传感方法。该传感器的敏感元件为修饰有分子印迹膜的丝网印刷电极,其制备和更换非常方便。用于电化学检测时,样品的富集时间为3min,地西泮的浓度在2.0×10-7～1.0×10-5mol/L范围内与峰电流呈良好的线性关系,检出限为2.5×10-8mol/L,基于猪肉样品的加标回收率为92%～95%。将该传感器初步用于实际样品分析,结果满意。