Molecularly Imprinted Polymers: Compromise between Flexibility and Rigidity for Improving Capture of Template Analogues

New synthetic strategies for molecularly imprinted polymers (MIPs) were developed to mimic the flexibility and mobility exhibited by receptor/enzyme binding pockets. The MIPs were prepared by bulk polymerization with quercetin as template molecule, acrylamide as functional monomer, ethylene glycol dimethacrylate as cross‐linker, and THF as porogen. The innovative grafting of specific oligoethylene glycol units onto the imprinted cavities allowed MIPs to be obtained that exhibit extended selectivity towards template analogues. This synthetic strategy gives promising perspectives for the design of molecular recognition of molecules based on a congruent pharmacophore, which should be of interest for drug development.     

Recognition characteristics of dibenzofuran by molecularly imprinted polymers made of common polymers

Dibenzofuran (DBF) recognition was studied by a molecularly imprinted polymer (MIP) made of commercially available polymers: polyvinyl chloride (PVC), polysulfone, polystyrene, and polyacrylonitrile. Preparation of MIPs was carried out by phase inversion of the polymer. Respective polymer solutions were coagulated with DBF template in water (non-solvent). In addition, reference polymers without the template were prepared in same manner as unimprinted polymers. After the DBF template was extracted from the solidified polymers by washing with methanol (MeOH), recognition experiments of DBF by the imprinted polymers were carried out for DBF in MeOH solutions. Equilibrium constants for DBF were calculated from saturation binding kinetics. Equilibrium experiment results reveal that recognition was effective for DBF binding to the DBF-imprinted polymer, especially for the imprinted PVC.     

基于磁球表面的抗原决定基印迹法用于选择性识别细胞色素c的研究

本工作合成了一种核壳型的抗原决定基磁性分子印迹聚合物,并用于选择性识别目标蛋白细胞色素c(Cytochrome c,Cyt c)。制备过程中先用溶剂热法合成Fe_3O_4磁性纳米粒子,然后加入Cyt c其C端的九肽作为模板,进行一段时间的预组装,最后加入多巴胺盐酸盐(DA)溶液,调节反应体系的p H使多巴胺聚合在磁球表面。洗脱掉模板后,即得到分子印迹聚合物。优化DA的用量使聚合物达到最佳的吸附效果。在最优条件下,制得的印迹聚合物对目标蛋白有较好的吸附选择性,并且有良好的重复利用性。此外,用抗原决定基做模板制得的聚合物的吸附容量和印迹因子明显优于用相应蛋白质做模板的情况。     

MOLECULAR IMPRINTED POLYMERS——Novel Polymer Adsorbents

1. INTRODUCTIONMolecular imprinted polymers (MIPs) have attracted wide attention for its molecular recognition properties. More and more publications involved in the area of adsorption and separation with MIPs. As early as in 1931, Poljacov [1] found that the pore structure of silica gel was influenced by the size and shape of the molecules in the gas atmosphere when he removed water from the gel under the atmosphere of benzene, toluene and xylene. The gel dried in benzene atmosphere a…     

MOLECULAR IMPRINTED POLYMERS—Novel Polymer Adsorbents

Molecular imprinted polymers(MIPs) are novel functional polymer materials and known as specific adsorbents for the template molecules,These novel functional polymers have promised potential applications in racemic resolution,sensor,chromatography,adsorptive separation and other fields.This review exhibits the approach for preparing MIPs,the features of MIPs obtained by different routes and the characteristics of adsorptive separations with MIPs.The molecular recognition mechanism and the idea of the present possibilities and limitations of molecular imprinting polymerization are discussed as well.     

模板结构与分子印迹效果间关系的研究

以一些分子量和体积都较小的简单化合物作为模板分子,合成分子印迹聚合物 。通过总结43种化合物的分子印迹聚合物的色谱数据,来研究模板分子的分子量、 作用位点数目、分子刚性等因素与印迹效果的关系。根据免疫学中免疫原性的定义 ,我们提出“印迹原性”的概念,即,化合物能够产生印迹效应的性质称为印迹原 性;具有印迹原必的化合物称为印迹原;并讨论了具有较强选择性的印迹原的化学 基础。所得到的结论将有助于对分子印迹聚合物的识别机理的进一步理解,并且对 于根据模板分子性质预测MIP分子识别能力将具有一定的指导意义。     

Design of molecular imprinted polymers compatible with aqueous environment

The main problem of poor water compatibility of molecularly imprinted polymers (MIPs) was addressed in examples describing design of synthetic receptors with high affinity for drugs of abuse. An extensive potentiometric titration of 10 popular functional monomers and corresponding imprinted and Blank polymers was conducted in order to evaluate the subtleties of functional groups ionisation under aqueous conditions. It was found that polymers prepared using 2-trifluoromethacrylic acid (TFMAA) in combination with toluene as porogen possess superior properties which make them suitable for effective template recognition in water. The potential impact of phase separation during polymerisation on formation of high quality imprints has been discussed. Three drugs of abuse such as cocaine, deoxyephedrine and methadone were used as template models in polymer preparation for the practical validation of obtained results. The polymer testing showed that synthesized molecularly imprinted polymers have high affinity and selectivity for corresponding templates in aqueous environment, with imprinting factors of 2.6 for cocaine and 1.4 for methadone and deoxyephedrine. Corresponding Blank polymers were unable to differentiate between analytes, suggesting that imprinting phenomenon was responsible for the recognition properties.     

Influence of intramolecular hydrogen bond of templates on molecular recognition of molecularly imprinted polymers

Three molecularly imprinted polymers (MIPs) were prepared corresponding to three structurally related template compounds 4-hydroxybenzoic acid (4-HBA), gentisic acid (GA) and salicylic acid (SA) that differ in intramolecular hydrogen bonding ability using acrylamide (AA) as a functional monomer. HPLC method was used to evaluate the binding performances of the MIPs to the templates and several analogues. The results showed that the difference in their molecular recognition ability was pronounced. The highest molecular recognition ability was observed for 4-HBA-imprinted polymer. It was proved that the hydrogen bond interaction between the functional monomer and the template (4-HBA) played a major role in the recognition process and Scatchard analysis showed that two classes of binding sites were formed in 4-HBA-imprinted polymer. Their dissociation constants were estimated to be 1.76×10⁻⁴ and 1.40×10⁻³ mol l⁻¹, respectively. But for GA- or SA-imprinted polymer the molecular recognition ability was not improved compared to the blank polymer (BP). By comparison of the structures of the three templates, it was concluded that the molecular recognition ability will decrease when the template itself is able to form intramolecular hydrogen bond in the molecular imprinting process. This study will be helpful for us to understand the molecular recognition mechanism of MIPs and of instructive significance for the prediction of the selectivity of MIPs.     

酚酞分子印迹聚合物的制备及特异吸附性能

以泻药酚酞为模板分子,4-乙烯基吡啶为功能单体制备了模板分子和功能单体不同比例的一系列酚酞分子印迹聚合物。利用扫描电镜对聚合物进行了表面形态分析,采用静态平衡实验法研究了聚合物对模板分子及其类似物的吸附行为和选择性识别能力。实验结果表明,所制备的分子印迹聚合物,吸附 3 h 后基本接近最大吸附量,其中模板分子、4-乙烯基吡啶和交联剂的摩尔比为 1∶6∶20的MIP2的印迹因子为 2.30,效果最佳。Scatchard 分析表明, 在所研究的浓度范围内,吸附过程存在两类结合位点,一类高亲和力结合位点的离解常数为Kd1= 0.63 mmol/L,最大表观结合量 Qmax1 = 25.4 umol/g,另一类低亲和力结合位点的离解常数为 Kd2 =3.5 mmol/L,最大表观结合量 Qmax2 = 61.9 umol/g,通过与酚酞类似物质在酚酞分子印迹聚合物上的吸附行为比较,表明对酚酞具有很好的选择性吸附。     

Preparation of bovine hemoglobin-imprinted polymer beads via the photografting surface-modified method

Molecularly imprinted polymers (MIPs), based on photografting surface-modified polystyrene beads as matrices, were prepared with acrylamide as the functional monomer, bovine hemoglobin as the template molecule and N, N′-methylene bisacrylamide as the crosslinker in a phosphate buffer. The results of IR, scanning electron microscope (SEM) and elemental analyses demonstrated the formation of a grafting polymer layer on the polystyrene-bead surface. Subsequent removal of the template left behind cavities on the surface of the polymer matrix with a shape and an arrangement of functional groups having complementary binding sites with the original template molecule. The adsorption studies showed that the imprinted polymers have a good adsorption capacity and specific recognition for bovine hemoglobin as the template molecule. Our results demonstrated that the polymer prepared via the photografting surface-modified method exhibited better selectivity for the template. Attempts to employ the new method in molecular imprinting techniques may introduce new applications for MIPs and facilitate probable protein separation and purification. __________ Translated from Chemical Journal of Chinese Universities, 2008, 29(1): 64–70     

Preparation and Evaluation of Molecularly Imprinted Monolithic Column for Felodipine in Micro-liquid Chromatography

This study concentrated on the production of molecularly imprinted polymers (MIPs) as highly selective sorbents for felodipine (FLD), a representive dihydropyridine calcium antagonists. Demonstrated chromatographically through a selection factor, these MIPs showed high selectivity for the template molecule among a group of structurally similar compounds. The recognition was found to correlate with structural similarity to the template compound.     

水相识别分子印迹技术

在各种基于超分子方法的仿生识别体系中,分子印迹聚合物已经证明是一种有潜力的合成受体,受到了广泛的关注。传统的分子印迹技术通常是在有机溶剂中制备对小分子具有选择性的印迹聚合物,而在水相中制备及识别生物大分子的研究仍具有相当的挑战性。从小分子到生物大分子、从有机相到水相,反映了分子印迹技术的发展趋势。本文对最近几年分子印迹在水相制备与识别方面的最新进展进行了总结与评述,探讨了水相识别印迹聚合物的设计策略与制备方法;着重介绍了水相识别技术在固相萃取、色谱固定相、药物控释、中药有效成份提取以及生物分子识别等方面的应用;指出了提高水相识别选择性的途径并对其将来的发展进行了建议与展望。     

Noncovalently galactose imprinted polymer for the recognition of different saccharides

Molecularly imprinted polymers (MIPs) represent a new class of materials possessing high selectivity and affinity for the target molecule. The main goal of this study was to prepare a galactose imprinted polymer and its potential application for the recognition of different saccharides. The selectivity of galactose imprinted polymer for several saccharides; glucose, mannose, fructose, maltose, lactose, sucrose and raffinose was investigated. Macroporous polymer was prepared utilizing ethyleneglycoldimethacrylate as a crosslinking agent, in the presence of galactose as a template molecule with acrylamide as a functional monomer. After the synthesis of polymer, galactose was removed by methanol:acetic acid washing. The selectivity of galactose imprinted polymer for other saccharides was utilized by batch rebinding assay. The arrangement of functional groups within cavities versus shape selectivity is discussed. The results showed that, the orientation of the functional groups was the dominating factor for the selectivity of galactose imprinted polymer. The dissociation constants of polymer were determined by Scatchard analysis.     

Preparation, characterization and properties studies of quinine-imprinted polymer in the aqueous phase

The uniform-sized spherical molecularly imprinted polymers were successfully prepared through molecular imprinting technology by two-step seed swelling and mini-emulsion polymerization in the aqueous condition using quinine as template molecules and methacrylic acid (MAA) as functional monomer. The polymers were characterized by IR spectra, thermal-weight analysis, scanning electron microscope and laser particle size analysis. The properties of imprinted polymers were investigated in different organic phases and aqueous media. In the organic media, results suggested that polar interactions (hydrogen bonding, ionic interactions) between acidic monomer/polymer and template molecules are mainly responsible for the binding and recognition; whereas in the aqueous medium, a considerable recognition effect was also obtained where the ionic (electrostatic) interaction and hydrophobic interaction play an important role. The experiments of binding different substrates indicated that the MIPs possessed an excellent rebinding ability and inherent selectivity to quinine. __________ Translated from Zhongshan Dcocue Xuebao/Acta Scientianum Natralium University Sunyatseni, 2005, 44(3)(in Chinese)     

光接枝表面修饰法制备牛血红蛋白的分子印迹微球

聚苯乙烯球载体表面经引发转移终止剂修饰后, 采用光接枝表面印迹方法制备了以牛血红蛋白(BHb)为模板分子、丙烯酰胺为功能单体和N,N′-亚甲基双丙烯酰胺为交联剂的分子印迹聚合物微球(MIP). 进一步采用红外光谱(IR)、扫描电子显微镜(SEM)和元素分析对聚合物微球进行了表征, 证实了载体表面成功地接枝了分子印迹层, 并研究了其吸附性能和分子识别选择性能. 结果表明, 采用光接枝表面修饰法制备的分子印迹微球对模板分子有着很好的吸附容量和识别选择性.     

合成引发方式对槲皮素-钴(Ⅱ)配位印迹聚合物结构与性能的影响

以槲皮素-钴(Ⅱ)的配合物为模板分子,在强极性甲醇溶剂中分别采用低温光引发和高温热引发聚合制备槲皮素-钴(Ⅱ)配位印迹聚合物.紫外-可见光谱分析确定了槲皮素与钴(Ⅱ)形成配合物的最佳配位比.根据印迹聚合物的平衡结合量优化功能单体丙烯酰胺用量.利用红外光谱、透射电镜和平衡结合实验,考察不同引发方式对聚合物的结构、微观形貌及结合性能的影响.进一步通过特异吸附容量和印迹指数确定,低温光引发聚合更适于配位分子印迹聚合物的制备.同时研究了不同阳、阴离子对印迹聚合物选择识别性的影响.结果表明光引发的金属配位分子印迹聚合物具有良好的吸附选择性,印迹指数可达3.919.     

Quercetin molecularly imprinted polymers: Preparation, recognition characteristics and properties as sorbent for solid-phase extraction

Molecular imprinted polymers (MIPs) were prepared through thermal polymerization by using quercetin as the template molecule, acrylamide (AA) as the functional monomer and ethylene glycol dimethacrylate (EDMA) as the cross-linker in the porogen of tetrahydrofuran (THF). The synthesized MIPs were identified by both Fourier transform infrared (FTIR) and scanning electron microscope (SEM). Systematic investigations of the influences of key synthetic conditions, including functional monomers, porogens and cross-linkers, on the recognition properties of the MIPs were conducted. Scatchard analysis revealed that the homogeneous binding sites were formed in the polymers. Besides quercetin, two structurally similar compounds of rutin and catechol were employed for molecular recognition specificity tests of MIPs. It was observed that the MIPs exhibited the highest selective rebinding to quercetin. Accordingly, the MIPs were used as a solid-phase extraction (SPE) sorbent for the extraction and enrichment of quercetin in cacumen platycladi samples, followed by HPLC-UV analysis. The application of MIPs with high affinity and excellent stereo-selectivity toward quercetin in SPE might offer a novel method for the enrichment and determination of flavonoid compounds in the natural products.     

核-壳型厚朴酚印迹聚合物的制备及性能研究

以表面修饰功能基团的SiO2微球为基体,以厚朴酚为模板分子,丙烯酰胺为功能单体,丙烯酸乙二醇二甲酯为交联剂,在SiO2微球表面制备对厚朴酚具有较好选择识别能力的核-壳型印迹聚合物.采用红外光谱及扫描电镜等技术表征聚合物的结构及形态.结果表明,该印迹聚合物表面成功制备了壳层厚度约为200nm的均匀印迹层.通过静态吸附、Scatchard分析法以及竞争吸附实验研究了该聚合物的吸附性能和选择性,结果表明,它对厚朴酚形成均一结合位点,离解常数为0.19mg/mL.     

Investigation of imprinting parameters and their recognition nature for quinine-molecularly imprinted polymers

A series of molecularly imprinted polymers (MIPs) was prepared using quinine as the template molecules by bulk polymerization. The presence of monomer-template solution complexes in non-covalent MIPs systems has been verified by both fluorescence and UV-vis spectrometric detection. The influence of different synthetic conditions (porogen, functional monomer, cross-linkers, initiation methods, monomer-template ratio, etc.) on recognition properties of the polymers was investigated. Scatchard analysis revealed that two classes of binding sites were formed in the imprinted polymer. The corresponding dissociation constants were estimated to be 45.00 micromol l(-1) and 1.42 mmol l(-1), respectively, by utilizing a multi-site recognition model. The binding characteristics of the imprinted polymers were explored in various solvents using equilibrium binding experiments. In the organic media, results suggested that polar interactions (hydrogen bonding, ionic interactions, etc.) between acidic monomer/polymer and template molecules were mainly responsible for the recognition, whereas in aqueous media, hydrophobic interactions had a remarkable non-specific contribution to the overall binding. The specificity of MIP was evaluated by rebinding the other structurally similar compounds. The results indicated that the imprinted polymers exhibited an excellent stereo-selectivity toward quinine.     

分子印迹聚合物的制备及孔结构研究

以N 叔丁氧羰酰 L 色氨酸和N 叔丁氧羰酰 L 酪氨酸为印迹分子 ,分别采用光引发聚合和热引发聚合制备了分子印迹聚合物 ,并对聚合物的手性识别能力进行了色谱评价 .结果表明 ,制备的分子印迹聚合物对印迹分子具有特异性的吸附作用 ,光引发聚合的N 叔丁氧羰酰 L 色氨酸的印迹聚合物对印迹分子的选择性因子达到 2 .318,热引发聚合的N 叔丁氧羰酰 L 酪氨酸对印迹分子的选择性因子为 1 373 进一步研究了分子印迹聚合物的孔结构 ,发现光引发聚合的分子印迹聚合物与空白聚合物的孔结构差别比热引发聚合的分子印迹聚合物与空白聚合物的差别更为明显 .对印迹分子洗脱前后的印迹聚合物的孔结构研究进一步表明 ,印迹分子存在于不同类型的孔中 .