双环戊二烯苯酚树脂的合成新工艺

以双环戊二烯（DCPD）和苯酚为原料,甲磺酸为催化剂,合成了双环戊二烯苯酚树脂。适宜工艺条件:苯酚与DCPD摩尔比为5、反应温度120 ℃、反应时间5 h、催化剂质量分数为1.5%,收率89%。所得的双环戊二烯苯酚树脂（DPR）经催化加氢法在H2气压力1.5 MPa、催化剂Pd/Al2O3用量为原料质量分数的0.5%、反应温度80 ℃条件下对树脂进行脱色处理。 得到浅黄色双环戊二烯苯酚树脂,收率89%,经IR和1H NMR表征分析其为目的产物,产物指标达到国际同类产品的质量标准。     

新型苯乙酰脒类化合物的合成及其感光性能

以氢化铝锂为还原剂,甲基叔丁基醚为溶剂,1,5-二氮杂双环[4.3.0]-5-壬烯(1)于55℃反应9 h制得1,5-二氮杂双环[4.3.0]壬烷(2),收率87.9%,纯度95.0%。2分别与溴代苯乙酮(3a),对甲氧基溴代苯乙酮(3b)和对溴基溴代苯乙酮(3c)进行消除反应合成了3个新型的苯乙酰基潜双环脒类化合物(4a~4c),其结构经1H NMR和LC-MS表征。采用正交实验对合成4a~4c的反应条件进行了优化。在最佳反应条件[以甲苯为溶剂,3a 25.2 mmol,n(3a)∶n(K2CO3)∶n(2)=1.0∶2.0∶1.4,于15℃反应24 h]下,1,5-二氮杂双环[4.3.0]-5-苯乙酰基壬烷(4a)收率89.0%,纯度87.9%。感光性能研究结果表明,1,5-二氮杂双环[4.3.0]-5-(4-甲氧基)苯乙酰基壬烷(4b)经紫外曝光400 mJ·cm-1,其引发性能最强,分解转化近45%;曝光2 000 mJ·cm-1,4b分解转化近90%。     

FeCl3催化4-羟基香豆素烷基化衍生物的合成

以4-羟基香豆素、查尔醇（或苄醇）为原料,FeCl₃作催化剂,1,2-二氯乙烷作溶剂,在室温下实现了4-羟基香豆素的烷基化反应,高效合成了10个4-羟基香豆素的烷基化衍生物（3a~3e, 5a~5e）,收率70%~91%和67%~78%。在此基础上,利用FeCl₃/DDQ催化体系的一锅法串联环化反应合成了一系列2,4-二芳基-2H,5H-吡喃并[3,2-c]苯并吡喃-5-酮衍生物（6a~6d）,收率52%~85%。其中3b, 3d, 3e, 6b, 6c, 6d为新化合物,其结构经¹H NMR, ¹³C NMR和HR-MS（ESI）表征。     

2-氮杂双环[3.1.0]己烷-3-羧酸的不对称合成

设计了以D-谷氨酸或L-谷氨酸为原料,经氨基保护、4-二甲氨基吡啶(DMAP)催化环合、还原脱水成烯、不对称Simmons-Smith反应、水解,高立体选择性合成2-氮杂双环[3.1.0]己烷-3-羧酸的路线.用1H NMR,13C NMR,单晶X衍射等对中间体及目标产物进行了结构表征.优化了DMAP催化环合、Simmons-Smith和水解反应的工艺条件,结果表明,DMAP催化环合反应在原料比为n(DMAP)∶n(二碳酸二叔丁酯)∶n(吡啶)=0.40∶4.0∶1.0条件下,(R)-5-氧代吡咯-1,2-二甲酸二叔丁酯的收率可达82%;Simmons-Smith反应随着反应时间延长,顺式结构与反式结构含量比不断变化,直到反应时间为19.5 h时,顺式与反式达到最佳比为6∶1,收率为75%.总收率达30%,de值72%.     

新型C12糖的合成及其在β-氨基醇手性拆分中的应用

以蔗糖为起始原料,经缩水、水解和缩合反应制得一种新型C12糖———2-[1R-(1,4∶3,6-二缩水果糖)]-异甘露醇(6),其结构经1H NMR,13C NMR和HR-MS表征。以6为手性拆分剂,(R,S)-β-氨基醇[(R,S)-7]在甲醇中被拆分为(R)-7(收率40.5%,>99%ee)和(S)-7(收率40.1%,>99%ee)。     

比阿陪南双环母核的合成

从水杨酰胺出发,通过环合、酰化、Reformatsky反应、取代和Dieckmann环化反应,合成了碳青霉烯类抗生素比阿陪南的关键中间体--比阿陪南双环母核{(4R,5R,6S)-6-[(R)-1-叔丁基二甲基硅氧乙基]-3-二苯基磷酰氧基4-甲基-7-氧代-1-氮杂双环-[3.2.0]庚-2-烯-2-羧酸烯丙酯},总收率43.1%,其结构经1H NMR确证.     

3-氧杂-8-氮杂双环[3.2.1]辛烷盐酸盐的合成

以己二酸为初始原料,依次经酰氯化,溴代,苄胺环合,水解,还原,脱水环合,氢解脱苄和成盐等8步反应,合成了3-氧杂-8-氮杂双环[3.2.1]辛烷盐酸盐,总收率23%,纯度100%,其结构经1H NMR确证。     

钯催化氟代偕二醇的芳基化反应

以醋酸钯、1,1’-联萘-2,2’-双二苯膦(BINAP)为催化剂,二甲苯为溶剂,氟代偕二醇砌块在碳酸钾的作用下,脱三氟乙酸后与溴代芳烃发生芳基化反应,于130℃反应7 h,合成了一系列α-氟代芳基酮类化合物,收率最高可达96%,其结构经¹H NMR,¹³C NMR,¹⁹F NMR和HR-MS(ESI)表征。     

10,10-二吡啶甲基-9,10-二氢蒽的合成研究

蒽酮1和氯甲基吡啶盐酸盐2在甲苯中回流反应生成10,10-二吡啶甲基-9(10H)蒽酮(3),收率63％～68％;3用硼氢化钠还原生成10,10-二吡啶甲基-9,l0-二氢蒽-9-醇(4),收率87％～90％;蒽醇4在酸催化下发生歧化反应,得到还原产物10,10-二吡啶甲基-9,10-二氢蒽(5)和氧化产物蒽酮3.该歧化反应受催化剂、溶剂和反应温度等影响.当蒽醇4用三氟化硼为催化剂、甲苯为溶剂、回流反应,5的收率达到74％.所合成的新化合物都经1H NMR,13C NMR,MS和元素分析表征确认.     

白皮杉醇的简便合成

报道了一种白皮杉醇(E-5)的简便合成方法。以3,5-二羟基苯乙酸为原料,经Perkin缩合和脱羧异构化反应合成了E-5,总收率55%,其结构经1H NMR,IR和ESI-MS确认。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.